TESTING-CERTIFICAZIONE TESTING & CERTIFICATION. Fisica della Combustione Physics of Combustion 0613\DC\REA\18_1 15/06/2018

Transcript

1 TESTING-CERTIFICAZIONE TESTING & CERTIFICATION Fisica della Combustione Physics of Combustion 1 613\DC\REA\1_1 15/6/21 Nome commerciale... : SEVALLAM Product Name Descrizione... : Vedi pagina 3 Description... : See page 3 Nome / Name... : IMPOL SEVAL A.D. Indirizzo / Address... : Prvomajska b. b. Città / City... : RS3125 Sevojno - Serbia Norma Tecnica / Technical standard: EN 1323:21+A1:214 - Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item Originale cliente Original : Client Copia capo laboratorio Copy: Head of laboratory

2 2 613\DC\REA\1_1 15/6/21 DATI GENERALI / GENERAL DATA : Data ricevimento campioni / Product supply date...: Data esecuzione prove / Date of test...: Identificazione delle norme di riferimento...: EN 1323:21+A1:214 Standard reference identification EN 1323:21 Identificazione dei metodi di prova...: // Test method identification...: // Campionamento / Sampling...: Costruzione dei provini / Specimens construction...: Provette ricavate dal laboratorio su lotto di materiale fornito dal cliente. Specimens taken from sample supplied by the client. Nessun giunto. No joint. Condizionamento secondo EN : 23 C - 5 % u.r. per 336 ore Conditioning compliing EN : 23 C - 5 % r.h. for 336 hours Procedura normalizzata / Standard procedure...: Deviazione dai metodi di prova...: Standard procedure deviation Controllo calcoli / Calculation check...: SI / Yes NO / No SI / Yes

3 3 613\DC\REA\1_1 15/6/21 CAMPIONI ANALIZZATI / SAMPLES TESTED: 3 Provette campione denominate / 3 Specimens of sample identified: SEVALLAM Descrizione : Pannello in alluminio laminato con film in poliestere Description : Aluminum polyester film laminated panel Spessore Spessore : 1,5 mm Thickness : 1,5 mm Peso per unità di superficie : 349 ± 1 g/m 2 (film 24,5±3,5 g/m 2, colla 12±1 g/m 2 ) Mass unit area : 349 ± 1 g/m 2 (film 24,5±3,5 g/m 2, adhesive 12±1 g/m 2 ) Tipo di substrato : Nessuno. Substrate type : None. Allestimento del campione : Costruzione del provino come da EN 1323 par 5.2 a) con pannelli sul retro posti a mm dal campione. Specimen mounting and fixing : Specimen mounting compliing to EN 1323 par 5.2 a) with backing boards at a distance of mm from the specimen. DICHIARAZIONE / STATEMENTS : I risultati di prova contenuti nel presente rapporto si riferiscono esclusivamente al campione provato. Test results contained in this test report relate only to specimens tested. Il presente rapporto non può essere riprodotto parzialmente senza l autorizzazione del Responsabile del Centro. The test report shall not be reproduced except in full without the written approval of the Managing Director. I dati tecnici riportati nella descrizione del campione sono desunti dalla scheda tecnica allegata dal cliente al campione di prova. The technical data reported on the specimen description are taken from client technical sheet I risultati di prova si riferiscono esclusivamente al comportamento dei provini di un materiale nelle particolari condizioni della prova; essi non sono destinati ad essere l unico criterio per la valutazione della pericolosità potenziale del materiale in opera. The test results relate to the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use.

4 4 613\DC\REA\1_1 15/6/21 FOTOGRAFIE / PHOTOGRAPHS Vista frontale ala lunga / Angolo verticale esterno dell ala lunga / Long wing front view Long wing vertical outer edge

5 5 613\DC\REA\1_1 15/6/21 RISULTATI / RESULTS: Metodo di prova EN 1323:21+A1:214 Identificazione provetta Specimen identification MJ/MJ [W/s] 1 14,3 a/at 567s 14,3 a/at 567s 2 Soglia non raggiunta Threshold not reached 3 Soglia non raggiunta Threshold not reached Media Average 4, 4, = fire growth rate index = total hest release LFS = lateral flame spread SMOGRA = smoke growth rate index FDP = flaming droplet or particles TSP = total smoke production [MJ] LFS [Si/Yes No/No] SMOGRA [m 2 /s 2 ] TSP [m 2 ] FDP [No - <1s - >1s] 1,9 No/No,6 56,7 No/No,3 No/No Soglia non 42,1 No/No raggiunta Threshold not reached,4 No/No Soglia non 3,9 No/No raggiunta Threshold not reached,9 No/No 2,9 45,9 No/No DATA Date 15/6/21 Settore Fisica della Combustione Physics of Combustion Sector Lorenzo Zavaglio B. U. Prodotto B. U. Product Ing. P. Fumagalli Documento firmato digitalmente ai sensi del D. Lgs. N. 2 del 7 Marzo 25 e successive modifiche Digitally signed document in accordance with Legislative Decree n. 2 dated March 7 th 25 and subsequent amendments.

6 6 613\DC\REA\1_1 15/6/21 SBI Test Report Laboratory: CSI SpA Product: SEVALLAM Test no. Test date: Print date: 1 13/6/21 15/6/21 Test condition Check points Results Baseline duct temp. (t=3-9) [K] HRR av,burner [KW] 32.3 threshold: MJ [W/s] 14.3 Ambient pressure. [Pa] HRR std burner [KW] 16 threshold: MJ [W/s] 14.3 Humidity [%] CO 2 /O 2 Ratio burner 2 6 [MJ] * 1.9 SPR av,burner [m²/s].1 Lateral flame spread (LFS) reach the edge? No k t SPR std burner [m²/s] 9 SMOGRA [cm²/s²].6 k p TSP 6 [m²] * 56.7 E' [KJ/m³] 172 Ambient temp. (t=3-9) [K] Flaming droplets/particles (FDP) (flaming <= 1 s)? No Duct diameter: [m] 15 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > 1 s)? No Minimum for flow [m³/s] 926 Time to [s] * 267 Maximum for flow [m³/s] 43 Time to [s] * 267 Burner response time [s] 9 Tig (2*6KW) [s] * Not reach * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2479 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 246 End data O 2 [%] 23 T-Duct (2.5 K drop from baseline) Baseline CO 2 (t=3-9) [%].1292 End data CO 2 [%].126 O2 (5% rise from baseline) Baseline light signal (t=3-9) End data light signal CO2 (2% drop from baseline) HRR, and values (Zoom) (W/s)..1 HRR, and values 5. (W/s) SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s SPR-Prod. SPR(6) TSP SMOGRA

7 7 613\DC\REA\1_1 15/6/21 SBI Test Report Laboratory: CSI SpA Product: SEVALLAM Test no. Test date: Print date: 2 13/6/21 15/6/21 Test condition Check points Results Baseline duct temp. (t=3-9) [K] HRR av,burner [KW] threshold: MJ [W/s] Ambient pressure. [Pa] 9974 HRR std burner [KW] 6 threshold: MJ [W/s] Humidity [%] 75 CO 2 /O 2 Ratio burner 7 6 [MJ] * SPR av,burner [m²/s] 3 Lateral flame spread (LFS) reach the edge? No k t SPR std burner [m²/s] 9 SMOGRA [cm²/s²] k p TSP 6 [m²] * 42.1 E' [KJ/m³] 172 Ambient temp. (t=3-9) [K] Flaming droplets/particles (FDP) (flaming <= 1 s)? No Duct diameter: [m] 15 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > 1 s)? No Minimum for flow [m³/s] 916 Time to [s] * Maximum for flow [m³/s] 361 Time to [s] * Burner response time [s] 9 Tig (2*6KW) [s] * Not reach * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2314 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 252 End data O 2 [%] 251 T-Duct (2.5 K drop from baseline) Baseline CO 2 (t=3-9) [%].126 End data CO 2 [%].1269 O2 (5% rise from baseline) Baseline light signal (t=3-9) 1246 End data light signal CO2 (2% drop from baseline) HRR, and values (Zoom) (W/s)..1 HRR, and values (W/s) SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s SPR-Prod. SPR(6) TSP SMOGRA

8 613\DC\REA\1_1 15/6/21 SBI Test Report Laboratory: CSI SpA Product: SEVALLAM Test no. Test date: Print date: 3 13/6/21 15/6/21 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 295. HRR av,burner [KW] 32.2 threshold: MJ [W/s] Ambient pressure. [Pa] 9925 HRR std burner [KW] 9 threshold: MJ [W/s] Humidity [%] 75 CO 2 /O 2 Ratio burner 2 6 [MJ] * SPR av,burner [m²/s] 79 Lateral flame spread (LFS) reach the edge? No k t SPR std burner [m²/s] 9 SMOGRA [cm²/s²] k p TSP 6 [m²] * 3.9 E' [KJ/m³] 172 Ambient temp. (t=3-9) [K] Flaming droplets/particles (FDP) (flaming <= 1 s)? No Duct diameter: [m] 15 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > 1 s)? No Minimum for flow [m³/s] 73 Time to [s] * Maximum for flow [m³/s] 397 Time to [s] * Burner response time [s] 9 Tig (2*6KW) [s] * Not reach * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2349 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 259 End data O 2 [%] 2422 T-Duct (2.5 K drop from baseline) Baseline CO 2 (t=3-9) [%].127 End data CO 2 [%].1277 O2 (5% rise from baseline) Baseline light signal (t=3-9) 169 End data light signal 1469 CO2 (2% drop from baseline) HRR, and values (Zoom) (W/s)..1 HRR, and values 2.5 (W/s) SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s SPR-Prod. SPR(6) TSP SMOGRA