Hard Disk Drive Duplicator Dock USB 3.0 to SATA HDD Duplicator Product ID: SATDOCK22RU3 The SATDOCK22RU3 USB 3.0 to SATA Hard Drive Duplicator Dock can be used as a standalone SATA hard drive duplicator, or as a USB 3.0 SATA hard drive docking station, enabling you to duplicate/clone an existing hard drive without the use of a host computer system or access docked hard drives as though they were installed within the computer system. In Duplicator Mode, it creates an exact 1-to-1 sector clone from one hard drive to another, including partition and boot sector information and all data, at a rate of ~72MB/second, ensuring data integrity and consistency for sensitive operations (data recovery, etc.). In Dock Mode, it can be connected to your host computer through USB 3.0, supporting up to 5 Gbps of bandwidth from both hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.
The value of this hard drive docking station can be further extended through a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
Certifications, Reports and Compatibility Applications Disk sector imaging/cloning to create an exact replica of a source drive onto another hard drive Create identical backups for when data integrity is crucial, such as in data recovery and forensic applications Technicians who require access to bare hard drives for backup/recovery purposes or needs to swap between drives regularly Quickly access data from a drive, without having to install it internally or into an enclosure Features Standalone Sector by Sector copying including the HPA SuperSpeed USB 3.0 host interface, with support for data transfer rates up to 5 Gbps Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD) LED progress bar for duplication status Compact, desktop-style form factor Hot-Swap and Plug-and-Play compatible
Warranty 2 Years Hardware Dimensioni unità 2.5in & 3.5in ID chipset Installazione unità JMicron - JMS551 Rimovibile Interfaccia USB 3.0 Numero di unità 2 Tipo bus USB 3.0 Tipo unità Ventola/e SATA No Prestazioni Capacità max unità Currently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) and 1TB 5400 RPM 2.5" hard drives (2TB total) Tipo e velocità USB 3.0-5 Gbit/s SATA II (3 Gbps) Connettore/i Connettori host 1 - USB Type-B (9 pin) USB 3.0 Femmina Connettori unità 2 - Presa SATA dati e alimentazione (7+15 pin) Presa Software Compatibilità con sistemi operativi Windows XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8 (32/64-bit) Mac OS 10.4/ 10.5/ 10.6/ 10.7/ 10.8 Linux Note/requisiti speciali Nota For duplication, the destination drive must be of equal or greater capacity than the source drive. If the source drive contains an EISA (Extended Industry Standard Architecture) partition, the EISA partition needs to be removed prior to beginning the duplication. Indicatori Indicatori LED 1 - Duplication Progress (Blue) 1 - Power (Green) 2 - Drive Power/Activity (Blue) Alimentazione Adattatore di alimentazione incluso Adattatore CA incluso Corrente di uscita 4A Corrente ingresso 1.2A Tensione di uscita Tensione ingresso Tipo presa 12 DC 110V-240V AC N
Tipo punta centrale Positivo Ambientale Temperatura d'esercizio 0 C to 85 C (32 F to 185 F) Caratteristiche fisiche Temperatura di conservazione Umidità Altezza prodotto Colore Larghezza prodotto Lunghezza prodotto -10 C to 95 C (14 F to 203 F) 5% ~ 90% RH 2.4 in [62 mm] Nero 4.1 in [103 mm] 5 in [128 mm] Peso prodotto 19.8 oz [562 g] Tipo enclosure Plastica Informazioni confezione Peso spedizione (confezione) 24.7 oz [700 g] Quantità confezione 1 Contenuto della confezione Incluso nella confezione 1 - Hard Drive Duplicator 1 - USB 3.0 Cable 1 - Power Adapter 1 - Instruction Manual Product appearance and specifications are subject to change without notice.