TESTING-CERTIFICAZIONE TESTING & CERTIFICATION Fisica della Combustione Physics of Combustion 66\DC\REA\7_ 6/2/27 Nome commerciale... : SEVALCON 22 Product Name Descrizione... : Vedi pagina 3 Description... : See page 3 Nome / Name... : IMPOL SEVAL A.D. Indirizzo / Address... : Prvomajska b. b. Città / City... : RS325 Sevojno - Serbia Norma Tecnica / Technical standard: EN 323:2+A:24 - Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item Originale cliente Original : Client Copia capo laboratorio Copy: Head of laboratory
2 66\DC\REA\7_ 6/2/27 DATI GENERALI / GENERAL DATA : Data ricevimento campioni / Product supply date...: 7..27 Data esecuzione prove / Date of test...:.2.27 Identificazione delle norme di riferimento...: EN 323:2+A:24 Standard reference identification EN 323:2 Identificazione dei metodi di prova...: // Test method identification...: // Campionamento / Sampling...: Costruzione dei provini / Specimens construction...: Provette ricavate dal laboratorio su lotto di materiale fornito dal cliente. Specimens taken from sample supplied by the client. Nessun giunto. No joint. Condizionamento secondo EN 323...: 23 C - 5 % u.r. per 336 ore Conditioning compliing EN 323...: 23 C - 5 % r.h. for 336 hours Procedura normalizzata / Standard procedure...: Deviazione dai metodi di prova...: Standard procedure deviation Controllo calcoli / Calculation check...: SI / Yes NO / No SI / Yes
3 66\DC\REA\7_ 6/2/27 CAMPIONI ANALIZZATI / SAMPLES TESTED: 3 Provette campione denominate / 3 Specimens of sample identified: SEVALCON 22 Descrizione : Pannello in alluminio verniciato con vernice a base di PVDF Description : Aluminum painted panel with PVDF based paint Spessore Spessore :,5 mm Thickness :,5 mm Peso per unità di superficie : 45 ± g/m 2 Mass unit area : 45 ± g/m 2 Vernice su lato a vista :, g/m 2 (fondo 2,3 g/m 2, finitura 6,5 g/m 2 ) Paint on front side :, g/m 2 (fondo 2,3 g/m 2, finitura 6,5 g/m 2 ) Vernice su lato non a vista :,2 g/m 2 Paint on back side :,2 g/m 2 Tipo di substrato : Nessuno. Substrate type : None. Allestimento del campione : Costruzione del provino come da EN 323 par 5.2 a) con pannelli sul retro posti a mm dal campione. Specimen mounting and fixing : Specimen mounting compliing to EN 323 par 5.2 a) with backing boards at a distance of mm from the specimen. DICHIARAZIONE / STATEMENTS : I risultati di prova contenuti nel presente rapporto si riferiscono esclusivamente al campione provato. Test results contained in this test report relate only to specimens tested. Il presente rapporto non può essere riprodotto parzialmente senza l autorizzazione del Responsabile del Centro. The test report shall not be reproduced except in full without the written approval of the Managing Director. I dati tecnici riportati nella descrizione del campione sono desunti dalla scheda tecnica allegata dal cliente al campione di prova. The technical data reported on the specimen description are taken from client technical sheet I risultati di prova si riferiscono esclusivamente al comportamento dei provini di un materiale nelle particolari condizioni della prova; essi non sono destinati ad essere l unico criterio per la valutazione della pericolosità potenziale del materiale in opera. The test results relate to the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use.
4 66\DC\REA\7_ 6/2/27 FOTOGRAFIE / PHOTOGRAPHS Vista frontale ala lunga / Angolo verticale esterno dell ala lunga / Long wing front view Long wing vertical outer edge
5 66\DC\REA\7_ 6/2/27 RISULTATI / RESULTS: Metodo di prova EN 323:2+A:24 Identificazione provetta Specimen identification.2mj/.4mj [W/s] Soglia non 2 Soglia non 3 Soglia non Media Average = fire growth rate index = total hest release LFS = lateral flame spread SMOGRA = smoke growth rate index FDP = flaming droplet or particles TSP = total smoke production [MJ] LFS [Si/Yes No/No] SMOGRA [m 2 /s 2 ] TSP [m 2 ] FDP [No - <s - >s],4 No/No Soglia non,4 No/No,2 No/No Soglia non 6,3 No/No,2 No/No Soglia non, No/No,3 No/No,9 No/No DATA Date 6/2/27 Settore Fisica della Combustione Physics of Combustion Sector Lorenzo Zavaglio Area Testing Testing Area Paolo Fumagalli Documento firmato digitalmente ai sensi del D. Lgs. N. 2 del 7 Marzo 25 e successive modifiche Digitally signed document in accordance with Legislative Decree n. 2 dated March 7 th 25 and subsequent amendments.
6 66\DC\REA\7_ 6/2/27 SBI Test Report Laboratory: CSI S.p.A. Product: SEVALCON 22 Test no. Test date: Print date: /2/27 3/2/27 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 293.4 HRR av,burner [KW] 29.62 threshold:.2 MJ [W/s]. Ambient pressure. [Pa] HRR std burner [KW].35 threshold:.4 MJ [W/s]. Humidity [%] 3 CO 2 /O 2 Ratio burner.676 6 [MJ] *.4 SPR av,burner [m²/s].6 Lateral flame spread (LFS) reach the edge? No k t.6 SPR std burner [m²/s].9 SMOGRA [cm²/s²]. k p. TSP 6 [m²] *.4 E' [KJ/m³] 72 Ambient temp. (t=3-9) [K] 29.47 Flaming droplets/particles (FDP) (flaming <= s)? No Duct diameter: [m].35 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > s)? No Minimum for flow [m³/s].5692 Time to.2 [s] * Maximum for flow [m³/s].674 Time to.4 [s] * Burner response time [s] 6 Tig (2*6KW) [s] * Not reach * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2. Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 2.955 End data O 2 [%] 2.944 T-Duct (2.5 K drop from baseline) 35.9 39 Baseline CO 2 (t=3-9) [%].976 End data CO 2 [%].9 O2 (.5% rise from baseline) 2.6794 39 Baseline light signal (t=3-9).592 End data light signal 99.9237 CO2 (.2% drop from baseline).34 36 2..5..5. 2 26 3 36 4 46 -.5 -. -.5 HRR, and values (Zoom) (W/s)..9..7.6.5.4.3.2.. HRR(3) HRR, and values 2.5 (W/s) 2..9..5.7..6.5.5..4 2 4 6 2 4 6.3 -.5.2 -.. -.5 HRR(3) SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s 2. 4.7 35.6 3.5 25.4 2.3.2 5.. 5 -. 2 4 6 2 4 6 SPR-Prod. SPR(6) TSP SMOGRA
7 66\DC\REA\7_ 6/2/27 SBI Test Report Laboratory: CSI S.p.A. Product: SEVALCON 22 Test no. Test date: Print date: 2 /2/27 3/2/27 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 293.93 HRR av,burner [KW] 2. threshold:.2 MJ [W/s]. Ambient pressure. [Pa] 26 HRR std burner [KW].329 threshold:.4 MJ [W/s]. Humidity [%] 3 CO 2 /O 2 Ratio burner.664 6 [MJ] *.2 SPR av,burner [m²/s].55 Lateral flame spread (LFS) reach the edge? No k t.6 SPR std burner [m²/s].9 SMOGRA [cm²/s²]. k p. TSP 6 [m²] * 6.3 E' [KJ/m³] 72 Ambient temp. (t=3-9) [K] 29.29 Flaming droplets/particles (FDP) (flaming <= s)? No Duct diameter: [m].35 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > s)? No Minimum for flow [m³/s].575 Time to.2 [s] * Maximum for flow [m³/s].624 Time to.4 [s] * Burner response time [s] 9 Tig (2*6KW) [s] * Not reach * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2. Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 2.9529 End data O 2 [%] 2.95 T-Duct (2.5 K drop from baseline) 35.4 33 Baseline CO 2 (t=3-9) [%].979 End data CO 2 [%].2 O2 (.5% rise from baseline) 2.675 33 Baseline light signal (t=3-9) 9.729 End data light signal.67 CO2 (.2% drop from baseline).3745 3..5. 2 26 3 36 4 46 -.5 -. -.5 HRR, and values (Zoom) (W/s)..9..7.6.5.4.3.2.. HRR(3) HRR, and values 2. (W/s).9.5...7.5.6.5..4 2 4 6 2 4 6 -.5.3.2 -.. -.5 HRR(3) SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s 2.6.5.4 7.3 6.2 5.. 4 -. 2 4 6 2 4 63 -.2 2 -.3 -.4 -.5 SPR-Prod. SPR(6) TSP SMOGRA
66\DC\REA\7_ 6/2/27 SBI Test Report Laboratory: CSI S.p.A. Product: SEVALCON 22 Test no. Test date: Print date: 3 /2/27 3/2/27 Test condition Check points Results Baseline duct temp. (t=3-9) [K] 294. HRR av,burner [KW] 29.73 threshold:.2 MJ [W/s]. Ambient pressure. [Pa] 77 HRR std burner [KW].353 threshold:.4 MJ [W/s]. Humidity [%] 3 CO 2 /O 2 Ratio burner.646 6 [MJ] *.2 SPR av,burner [m²/s].59 Lateral flame spread (LFS) reach the edge? No k t.6 SPR std burner [m²/s].9 SMOGRA [cm²/s²]. k p. TSP 6 [m²] *. E' [KJ/m³] 72 Ambient temp. (t=3-9) [K] 29.72 Flaming droplets/particles (FDP) (flaming <= s)? No Duct diameter: [m].35 No. of acceptable thermocouples 3 Flaming droplets/particles (FDP) (flaming > s)? No Minimum for flow [m³/s].56 Time to.2 [s] * Maximum for flow [m³/s].6 Time to.4 [s] * Burner response time [s] 9 Tig (2*6KW) [s] * Not reach * After ignition of main burner a Baseline O 2 (t=3-9) [%] 2.79 Synchronisation information Baseline Last point Baseline O 2 (t=3-9) [%] 2.953 End data O 2 [%] 2.9493 T-Duct (2.5 K drop from baseline) 37.4 33 Baseline CO 2 (t=3-9) [%].97 End data CO 2 [%].97 O2 (.5% rise from baseline) 2.6742 33 Baseline light signal (t=3-9).99 End data light signal 99.63 CO2 (.2% drop from baseline).375 297 2..5..5. 2 26 3 36 4 46 -.5 -. HRR, and values (Zoom) (W/s)..9..7.6.5.4.3.2.. HRR(3) HRR, and values 2. (W/s).5.9...7.5.6..5 2 4 6 2 4 6 -.5.4.3 -..2 -.5. -2. HRR(3).5.4.3.2.. -. -.2 SPR, TSP and SMOGRA values m 2 /s m 2 or cm 2 /s 2 2 6 4 2 6 2 4 6 2 4 64 2 SPR-Prod. SPR(6) TSP SMOGRA