ELCART. Manuale di istruzioni/scheda tecnica. T8 LED T8 LED light tube. LED Lighting Division APPROVE CHECK DRAW

Dimensione: px

Iniziare la visualizzazioe della pagina:

Download "ELCART. Manuale di istruzioni/scheda tecnica. T8 LED T8 LED light tube. LED Lighting Division APPROVE CHECK DRAW"

Nicolo Poletti
6 anni fa
Visualizzazioni

1 PAGINA 1 DI 5 Product T8 LED T8 LED light tube Part NO. SERIE 19/13260 Data Edition V1.0 LED Lighting Division APPROVE CHECK DRAW

2 PAGINA 2 DI 5 General description: This product is good for workshop, office, bank, hospital, shopping centre, subway, school, and other indoor places which require light of high luminosity and energy-saving. It is designed to replace directly the conventional T8/T10 fluorescent tube light. Features Illuminant: ultra-bright white 3528 SMD LED. Front finish: transparent or stripped. Every LED works independently. While one LED loses efficacy, others can work as usual. High efficiency, low power consumption. Light color: cool white, natural white, warm white. Base: conventional G13 base. Instant response, no strobe light wave. The integrated constant current power supply ensures steady performance and long lifespan. Technical parameter: Basic information Type Lenght Part No. Material Shell surface LED Q'ty 1.5m SERIE 19/13260 Aluminum alloy+pc stripe/silver 324PCS Electrical parameter (Temperature=25 C) Lenght Part No. Voltage (V AC) Input current (A) Rated Power 1.5m SERIE 19/ * 25* Optical Parameter (Temperature = 25 C) Test condition: 220V/50HZ Type Part No. Light color CCT (K) CRI (Ra) Lumen. (lm) Lux (lux) 1m 2m 3m Angle 19/13260 cool white /13262 natural white /13265 warm white

3 PAGINA 3 DI 5 Outer dimensions: Dimensions information: Lenght Part No. A B D Min. Max. Min. Max. T8 1.5m SERIE 19/ Φ26 Product pictures: Aluminum alloy+pc Installation All the installation must be done by the authorized or qualified persons. Otherwise electric shock maybe occur. Diagram Installation steps Turn off the electricity supply before installation. Remove the electronic starter and substitute with the provided one. Instructions Ambient conditions requirements (Working temperature): -20~40 C (Storage temperature ): -30~65 C (Working humidity): -30%~85% (Storage humidity ): 10%~90%. Unpacking and Checking Open the package and check the products, please handle with care.

PAGINA 4 DI 5 If the new LED tube is found damaged, please contact us instantly with the complete package. Please do not try to use the damaged LED tube.

4 PAGINA 4 DI 5 If the new LED tube is found damaged, please contact us instantly with the complete package. Please do not try to use the damaged LED tube. Cautions In order to ensure the product work properly, please use the power supply within indicating voltage range. Please follow the correct installation steps to install the product. Please turn off the power supply for the base to avoid the risk of electric shock while installing or uninstalling the product. Do not use the products in the high humidity or dust environment, including but not limited to the following environment: bathroom, sauna room, polishing workshop. Please install the LED tube in the base of standard size. Do not look directly at LED light source for a long time, because the high-intensity light source may cause harm to eyes. Please contact a qualified electrician for repair services when you find the following problems,and do not disassemble the tube light. Note that the tube axis is directional. When inserted in the wrong orientation it will not light up. Do not use with dimmers. Use in dry locations only. Or there would be risk of electric shock. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. Please contact a qualified electrician for repair services when you find the following problems, and do not disassemble the tube light: Electronic components are exposed to rain or other liquids splash. Products release smell gas, abnormal sound and unusual flash. The is broken.debris goes into the base or the tube. The LED tube is not in the correct installation location of the base. Troubleshooting Any maintenance shall be done by the authorized agency or manufacturer. The LED tube dose not light after connecting the power supply. Turn off the power supply and check whether the the circuit screw for adjustment is loose or the LED tube and the sheet metal in the base fit well or not. The lamp flashes when it is powered on. Turn off the power supply. Please check whether the power supply voltage is lower than the required.

PAGINA 5 DI 5 Packing info Lenght Part No. Unit weight (Kg) Q'ty (pcs/ package) Packing weight (Kg) Packing size (cm) 1.5m SERIE 19/13260 0.

5 PAGINA 5 DI 5 Packing info Lenght Part No. Unit weight (Kg) Q'ty (pcs/ package) Packing weight (Kg) Packing size (cm) 1.5m SERIE 19/ *245*272 Packing Method 1pcs per one white box 10pcs per small carton 2 small cartons per outer carton Note a. The above parameters can be modified without prior notification. If there is any change, according to the real object please. b. We reserve the right to amend the data without any prior notification. Sorry for the inconvenience caused.

Documenti analoghi

ELCART. Manuale di istruzioni/scheda tecnica SPECIFICATION. Flexible LED strips PART NO. SERIE 19/10400 DATE Dimmable 300 LED Flexstrip IP20

ELCART. Manuale di istruzioni/scheda tecnica SPECIFICATION. Flexible LED strips PART NO. SERIE 19/10400 DATE Dimmable 300 LED Flexstrip IP20 PAGINA 1 DI 6 SPECIFICATION ITEM Flexible LED strips PART NO. SERIE 19/10400 DATE 1-1-2012 Dimmable 300 LED Flexstrip IP20 Features: Use high brightness PLCC-6 SMD LEDs as lighting source. Each LED has