KIT INVERTIBILE PELLICOLA B&W KIT 1 L REVERSAL FILM B&W 1 L KIT Revisione 2 21 Settembre 2018 Revision 2 21 th September 2018 BELLINI FOTO S.r.l. Via J.F. KENNEDY, 9 PONTENUOVO DI TORGIANO - PG - ITALY Tel. +39 075-985174 Fax +39 075-985288 e-mail: info@bellinifoto.it
DESCRIZIONE Step Temperatura C Tempo 1 6 Film Tempo 7-12 Film PRIO SVILUPPO 20.0 8 m 00 s 8 m 30 s Tempo di miscelazione in Tank SBIANCA 20.0 4 m 00 s 4 m 00 s Continuous mixing CHIARIFICATORE 20.0 4 m 00 s 4 m 00 s INVERSIONE 20.0 2 m 00 s 2 m 00 s LAVAGGIO 20.0 10 m 00 s 10 m 00 s SECONDO SVILUPPO SCHEDA TECNICA Con questo Kit si ottengono 1 L di soluzioni di Primo Sviluppo - Sbianca Chiarificatore - Inversione Secondo Sviluppo - Fissaggio e 10 L di Stabilizzatore. Sfrutta il processo invertibile pellicola Bianco e Nero. Questo kit è adatto a trattare dalle 10 alle 12 pellicole negative da 36 exp. ed inverte con buoni risultati le seguenti pellicole testate: PAN F esposta a 25 ASA FP 4 Plus esposta a 125 ASA - SCALA esposta a 200 ASA - Rollei Ortho 25 esposta a 25 ASA. ISTRUZIONI DI SICUREZZA Per quanto riguarda la sicurezza d uso controllare la MSDS oppure contattare la BELLINI FOTO S.r.l. all e-mail: info@bellinifoto.it oppure telefonicamente al numero +39 075 985 174. PROCESSO 20.0 4 m 00 s 4 m 30 s LAVAGGIO 20.0 1 m 00 s 1 m 00 s FISSAGGIO 20.0 5 m 10 m 5 m 10 m LAVAGGIO 20.0 10 m 00 s 10 m 00 s FINAL RINSE Temp. Amb. 30 s 30 s Revisione 2 21 Settembre 2018 KIT INVERTIBILE PELLICOLA B&W KIT 1 L Da questo Step in poi è possibile lavorare alla luce del giorno
Revisione 2 21 Settembre 2018 Cod. KIT ECN/3 ISTRUZIONI DI MISCELAZIONE Si raccomanda di ricostituire solo il quantitative di soluzione necessaria, utilizzando piccolo dosi per volta così da prevenire la formazione di aloni sulle zone a bassa densità luminosa. Questo processo è adatto anche all utilizzo della ri-esposizione al posto dello Step dell inversione chimica: in tal caso esporre la pellicola ad una lampada al tungsteno (potenza 100 W distanza di 1 metro circa) ) per 20 secondi per ogni lato. 1 e 2 Sviluppo Acqua Concentrato Sbianca Acqua Parte A Parte B 1 L 650 ml 250 ml 100 ml Chiarificatore Acqua Concentrato Inversione Acqua Concentrato Fissaggio Acqua Concentrato 1 L 800 ml 200 ml Stabilizzatore Acqua Concentrato 1 L 990 ml 10 ml
DESCRIPTION Process Temperature C Time 1 6 Film Time 7-12 Film FIRST DEVELOPER 20.0 8 m 00 s 8 m 30 s Tank mixing time BLEACH 20.0 4 m 00 s 4 m 00 s Continuous mixing CLARIFIER 20.0 4 m 00 s 4 m 00 s REVERSAL 20.0 2 m 00 s 2 m 00 s WASH 20.0 10 m 00 s 10 m 00 s SECOND DEVELOPER TECHNICAL DATA SHEET Kit to make 1 liter of 1 st Developer - Bleach Clarifier- Reversal - 2 nd Developer - Fixing Stabilizer. It is made to process Black & White films. The kit is to process 10-12 negative films 36 exp. and reverses the following films: PAN F exposed at 25 ASA FP 4 Plus exposed at 125 ASA - SCALA exposed at 200 ASA - Rollei Ortho 25 exposed at 25 ASA SAFETY INSTRUCTION About safety and handling refer to MSDS or contact BELLINI FOTO S.r.l. at e-mail: info@bellinifoto.it or at telephone number +39 075 985 174. PROCESS 20.0 4 m 00 s 4 m 30 s WASH 20.0 1 m 00 s 1 m 00 s FIXER 20.0 5 m 10 m 5 m 10 m WASH 20.0 10 m 00 s 10 m 00 s FINAL RINSE Room Temp. 30 s 30 s Revision 2 21 th September 2018 REVERSAL FILM B&W 1 L KIT From this step is possible to work in daylight
Revision 2 21 th September 2018 Cod. KIT ECN/3 MIXING INSTRUCTION Recommended to prepare only the amount of solution needed, using small doses to prevent formation of high clouds in the low lights. This process is suitable for re-exposition to light, instead the chemical reversal bath step, if re-exposure to light is the option chosen, do not use reversal bath, but expose the film to tungsten lamp 100w 20 second for each film side. 1 st e 2 nd Developer Water Concentrate Bleach Water Part A Part B 1 L 650 ml 250 ml 100 ml Clarifier Water Concentrate Reversal Water Concentrate Fixer Water Concentrate 1 L 800 ml 200 ml Final Rinse Water Concentrate 1 L 990 ml 10 ml