RAPPORTO DI CLASSIFICAZIONE CLASSIFICATION REPORT DC01/CL/091F07

Похожие документы
RAPPORTO DI CLASSIFICAZIONE CLASSIFICATION REPORT 0614\DC\REA\12_5

TUBO PIUMA 100 Presa d aria silenziata per fori di ventilazione nelle facciate degli edifici Air intake silencer for air intakes of building façades

Costruzioni Constructions. Acustica Acoustics 0109/DC/ACU/10 26/07/2010

SMART PIU' -28/112 9 greche POLYPIU'-PLAST S.R.L. VIA DELLE INDUSTRIE, GORNATE OLONA (VA)

COSTRUZIONI FISICA DELLE COSTRUZIONI

UNI EN ISO 354 :2003 UNI EN ISO :1998

RAPPORTO DI CLASSIFICAZIONE RAPPORT DE CLASSEMENT 0314\DC\REA\12

Metodi di prova per la determinazione della reazione al fuoco: evoluzione del quadro europeo. Silvio Messa


FLORIM CERAMICHE SPA Via Canaletto, Fiorano Modenese (MO)

DNV BUSINESS ASSURANCE

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax

DICHIARAZIONE DI CONFORMITA CE CERTIFICATION - CPD (Construction Products Directive)

CERTIFICATO CE DI CONFORMITÀ < PRODOTTO(I) (2) >

0017/DC/ACU/05 10/05/2005

Definizioni «Classi di Reazione al Fuoco»

RAPPORTO DI PROVA TEST REPORT. KONTROLDRY mod. 20. KONTROLDRY mod. 20

UNI EN ISO Corrosion protection of steel structures by protective paint systems. Laboratory performance test for

DOMANDA PER IL RICONOSCIMENTO DEL LABORATORIO DI PROVA APPLICATION FOR ASSESSMENT OF TESTING LABORATORY

TEST REPORT INDICE - INDEX

SERVIZIO DI TARATURA IN ITALIA Calibration Service in Italy. CERTIFICATO DI TARATURA N. 182/2009 Certificate of Calibration No.

1. Domanda di certificazione da riportare su carta intestata del fabbricante che richiede la certificazione / Certification request To report on

OLIVO e LEGNI GRIGI per ESTERNO MRK

BAMBOO e ZEBRANO per ESTERNO MRK

Deles Imballaggi Speciali s.r.l. rapporto test caduta e trasportabilità 1

Dr. Francesco Bitti. The purpose of the test is to determine if there s a weakening of tensile force on Taltos specimens after aging.

RAPPORTO DI PROVA TEST REPORT

RAPPORTO DI PROVA: del IDENTIFICAZIONE DELL ARTICOLO (no ) METALLO MINNIE CAMPANELLO METALLO PEPPA PIG CAMP

CERTIFICATO DI CONFORMITA' Prodotto biologico - Regime di Controllo CE Codice Organismo di Controllo: IT ICA - Aut. MiPAF DM n del

no. SIC Rev. 00 Dated

ALLUMINIO e ORO per ESTERNO MRK

M/S AMARU' GIOVANNI VIA S. ERASMO snc VASCHE DI CASTEL S. ANGELO (RI) ITALY

CERTIFICATO DI CONFORMITA' Documento giustificativo ai sensi dell'art. 29, 1 del Reg CE 834/07

RAPPORTO DI PROVA TEST REPORT

CERTIFICATO DI CONFORMITA' Allegato a Documento giustificativo ai sensi dell'art. 29, 1 del Reg CE 834/07 S'ATRA SARDIGNA SOC. COOP. A.R.L.

joy COLORI - COLOURS MONOCOTTURA IN PASTA BIANCA ATOMIZZATA 1200 C - App. J - GRUPPO BIIa Watch Grigio Smile Bianco 10x10. 4 x4 10x10.

DICHIARAZIONE DI CONFORMITA' / Declaration of Conformity

SISTEMI DI GUAINE SPIRALATE E RACCORDI GIREVOLI

RAPPORTO DI CLASSIFICAZIONE DELLA RESISTENZA AL FUOCO PER UN SISTEMA DI SIGILLATURA DI GIUNTI LINEARI IN CONFORMITÀ ALLA UNI EN : A1:

::~ eurofins Modulo Uno

KalibraDRY modello N 4.0

CERTIFICATO DI CONFORMITA' Allegato a Documento giustificativo ai sensi dell'art. 29, 1 del Reg CE 834/07 GIOIA SUCCHI SRL

REPORT AUDIT DI DOSE PER STERILIZZAZIONE RAGGI BETA ELECTRON BEAM STERILIZATION VALIDATION REPORT

M/S CERAMICA SCARABEO Località Pian del Trullo Fabrica di Roma (VT), ITALY Fabrica di Roma (VT), ITALY. C. A. Sig.

- RAPPORTO DI PROVA - PER GRANDI IMBALLAGGI DESTINATI AL TRASPORTO DI MERCI PERICOLOSE

Filtri a ciclone. Cyclon filters

Progetto in inchiesta pubblica PROGETTO C CEI-UNEL 20-.

Si comunica che le serrande tagliafuoco modello WK25 We advise that fire dampers model WK25

Gruppo di lavoro 1 Metadati e RNDT. Incontro del 22 luglio 2014

RAPPORTO TECNICO TECHNICAL REPORT n

Alimentatore modello PS10-BB

Guida alle caratteristiche generali General specifications COMANDO / CONTROL SICUREZZA / SAFETY ISOLATED ISOLAMENTO / ISOLATED

CERTIFICATO N. EMS-1318/S CERTIFICATE No. FALPI S.R.L. RINA Services S.p.A. Via Corsica Genova Italy

CERTIFICATO N. TS/271/95 CERTIFICATE No. MARTOR S.P.A. ISO/TS16949:2009 VIA XX SETTEMBRE, TORINO (TO) ITALIA

STRAIGHT CONICAL POLES WITH BASE PLATE. Tolleranze dimensionali: Norme UNI EN 40 parte 2 Dimension tolerances

RAPPORTO DI PROVA Type Test Report

LE TUBAZIONI IN POLI CLORURO DI VINILE RIGIDO NON PLASTIFICATO (PVC-U) PER SCARICHI ABASSA ED ALTA TEMPERATURA ALL INTERNO DEI FABBRICATI

Mod INTERFACCIA USB/KEY USB/KEY INTERFACE. Sch./Ref.1067/003

CERTIFICATO DI CONFORMITA' Allegato a Documento giustificativo ai sensi dell'art. 29, 1 del Reg CE 834/07 SERMONDI SOCIETA' AGRICOLA SEMPLICE

Rampe per alta pressione in acciaio inossidabile AISI 316L

Declaration of Performance

Pannello LEXAN BIPV. 20 Novembre 2013

CERTIFICATO N. CERTIFICATE No /06/S FIORINI PACKAGING S.P.A. ISO 9001:2008 VIA GIAMBATTISTA FIORINI SENIGALLIA (AN) ITA

SUPERCAP SRL VIA DELL'INDUSTRIA, MOMBAROCCIO (PU)


Pannello Lexan BIPV. 14 Gennaio 2013

DICHIARAZIONE DI PRESTAZIONE DECLARATION OF PERFORMANCE No. S235

FOCS FAMILY RICAMBI ALTERNATIVI PER MOTORI LOMBARDINI NON ORIGINAL PARTS FOR LOMBARDINI ENGINES REL

CATALOGO PARTI DI RICAMBIO SPARE PARTS CATALOG. Rev.0-05/2016

CERTIFICATO DI CONFORMITA' Allegato a Documento giustificativo ai sensi dell'art. 29, 1 del Reg CE 834/07 AGRICOLA GRAINS SPA SOC. UNIP.

LOCALI RICARICA MULETTI

Le materie plastiche: criteri di selezione per l uso in prodotti finiti

Quando mi collego ad alcuni servizi hosting ricevo un messaggio relativo al certificato di protezione del sito SSL, come mai?

N./No CPR Aggregati per calcestruzzo / Aggregates for concrete. IMPRESA MILESI GEOM. SERGIO S.R.L. Via Molinara, Gorlago (BG)

TRAVERTINI TRAVERTINI

Pentair ensures that all of its pumps (see Annex) affected by the above mentioned Regulation meet the 0,1 MEI rating.

Транскрипт:

RAPPORTO DI CLASSIFICAZIONE CLASSIFICATION REPORT DC01/CL/091F07 Rapporto di classificazione di reazione al fuoco del prodotto Reaction to fire classification report of product... : ROOFLITE Descrizione Description... : Vedi pag. 2 / see page 2 Per conto di On behalf of... : EMP S.A. Indirizzo Address... : Via Lische, 11/13 CH-855 Stabio - Svizzera Norma tecnica: EN 13501-1 - Classificazione al fuoco di prodotti ed elementi da costruzione - Parte 1: Classificazione sulla base dei dati di prova derivati da prove di reazione al fuoco Technical standard: EN 13501-1 Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests

1. DATI GENERALI / GENERAL DATA : Identificazione delle norme di riferimento / Standard reference identification: EN 13501-1 - Classificazione al fuoco di prodotti ed elementi da costruzione - Parte 1: Classificazione sulla base dei dati di prova derivati da prove di reazione al fuoco EN 13501-1 Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests. EN ISO 11925-2 Prove di reazione al fuoco prodotti edilizi - parte 2 - innesco quando soggetto al diretto contatto della fiamma EN ISO 11925-2 Reaction to fire tests for building products - part. 2 -ignitability when subjected to direct impingiment of flame. EN 13823 Prove di reazione al fuoco prodotti edilizi - Prodotti edilizi escluse le pavimentazioni esposti ad un attacco termico di un singolo elemento in combustione EN 13823 Reaction to fire tests for building products _ Building products excluding floorings exposed to the thermal attack by a single burning item. 2. IDENTIFICAZIONE DELLE PROCEDURE / PROCEDURES IDENTIFICATION Procedura normalizzata / Standard procedure :... : Controllo calcoli e trasferimento dati / Calculation and data transfer check... : SI / YES SI / YES 3. DETTAGLI DEL PRODOTTO CLASSIFICATO / DETAILS OF CLASSIFIED PRODUCT 3.1 Natura e impiego / Nature and end use application : Il prodotto ROOFLITE è definito come una lastra grecata in policarbonato La sua classificazione è valida per le seguenti condizioni di impiego: The product ROOFLITE is defined as a profiled polycarbonate sheet Its classification is valid for the following end use application(s): Parete elemento disposto a coltello Wall Self standing wall Copertura Sospesa Ceiling Suspended 3.2 Descrizione / Description: Il prodotto ROOFLITE è compiutamente descritto nei rapporti di prova in sussidio della classificazione elencati in 5.1 The product ROOFLITE is fully described in the test reports in support of the classfication listed in 5.1. 4. DICHIARAZIONI / DECLARATIONS Questo rapporto di classificazione definisce la classificazione assegnata al prodotto indicato in copertina secondo le procedure stabilite nella norma EN 13501-1 / This classification report defines the classification assigned to the product mentioned on the cover in accordance with the procedures given in EN 13501-1. I risultati di prova contenuti nel presente rapporto di classificazione si riferiscono esclusivamente al campione provato Test results contained in this classification report relate only to the specimens tested. Il presente rapporto di prova non può essere riprodotto parzialmente senza l autorizzazione del Responsabile di Laboratorio The test report shall not be reproduced except in full without the written approval of the Managing Director. Pag / Pag 2

5. RAPPORTI DI PROVA E RISULTATI DI PROVA IN SUPPORTO DI QUESTA CLASSIFICAZIONE TEST REPORTS AND TEST RESULTS IN SUPPORT OF THIS CLASSIFICATION 5.1 Rapporti di prova / test reports Nome del laboratorio / Name of laboratory Nome del Committente / Name of sponsor Numero di Identificazione del rapporto di prova / Test report ref. No. Metodo di prova / test method CSI S.p.A. EMP S.A. DC01/945F07 EN 13823 CSI S.p.A. EMP S.A. DC01/94F07 EN 13823 CSI S.p.A. EMP S.A. DC01/947F07 EN ISO 11925-2 CSI S.p.A. EMP S.A. DC01/948F07 EN ISO 11925-2 5.2 Risultati di prova per prodotti da costruzione esclusi i pavimenti Test results for construction products except floorings Metodo di prova Parametro Numero di prove Test method Parameter Number of tests Parametri continui media / Continuous parameter EN ISO11925-2 0,8 mm Attacco della fiamma in superficie Surface flame attack Attacco della fiamma all estremità Edge flame attack Gocce/parti accese / Flamig droplets/particle Innesco della carta da filtro/ Ignition of the filter paper 12 Risultati / Results average Parametri di conformità / Compliance parameter N / N EN 13823 0,8 mm FIGRA 0,2MJ 3 1,8 FIGRA 0,4MJ 1,8 LFS < Edge THR00s [MJ] 0,3 SMOGRA [m 2 /s 2 ] 3 0 TSP00s [m 2 ] 9,3 Gocce/parti accese Flaming droplets/ particles 3 N / N Pag / Pag 3

EN ISO11925-2 1,1 mm Attacco della fiamma in superficie Surface flame attack Attacco della fiamma all estremità Edge flame attack Gocce/parti accese / Flamig droplets/particle Innesco della carta da filtro/ Ignition of the filter paper 12 N / N EN 13823 1,1 mm FIGRA 0,2MJ 3 1,5 FIGRA 0,4MJ 1,5 LFS < Edge THR00s [MJ] 0,2 SMOGRA [m 2 /s 2 ] 3 0 TSP00s [m 2 ] 7,0 Gocce/parti accese Flaming droplets/ particles 3 N / N Pag / Pag 4

. CLASSIFICAZIONE E CAMPO DIRETTO DI APPLICAZIONE CLASSIFICATION AND DIRECT FIELD OF APPLICATION.1 Riferimenti e campo diretto di applicazione / Reference and direct field of application Questa classificazione è stata condotta conformemente alla clausola 8.2 della EN 13501-1:2002. This classification has been carried out in accordance with clause 8.2 of EN 13501-1: 2002..2 Classificazione / Classification Il prodotto ROOFLITE in relazione al suo comportamento alla reazione al fuoco è classificato: The product ROOFLITE in relation to its fire reaction behaviour is classified. B La classificazione aggiuntiva in relazione allo sviluppo di fumo è: The additional classification in relation to smoke production is: s1 La classificazione aggiuntiva in relazione alle gocce/particelle accese è: The additional classification in relation to flaming droplets/particles is: d0 Comportamento al fuoco Fire behaviour Il formato per la classificazione di reazione al fuoco per i prodotti da costruzione eccetto i pavimenti è la seguente: The format of the reaction to fire classification for construction products except flooring is: Sviluppo di fumo Smoke production Parti infiammate Flaming droplets B - s 1 - d 0.3 Campo di applicazione / Field of application Questa classificazione è valida per le seguenti condizioni di impiego / This classification is valid for the following end use conditions: Senza supporto / appoggio Without support / backing Con cavità With gap Tipo di fissaggio: nessuno Type of fixings: none Pag / Pag 5

Questa classificazione è anche valida, per i seguenti parametri del prodotto / This classification is also valid,, for the following product parameters: Peso per unità di superificie da 1100 a 1800 g/m 2 Mass per unit area from 1100 a 1800 g/m 2 Spessore da 0,8 a 1,1 mm Thickness from 0,8 to 1,1 mm 7. LIMITAZIONI / LIMITATIONS 7.1 Restrizioni / Restrictions Questo rapporto di prova è valido sino alla data 2.11.2012. This classification report is valid until 2.11.2012. 7.2 Avvertimento / Warning Questo documento non rappresenta un'approvazione di tipo od una certificazione del prodotto This document does not represent type approval or certification of the product. DATA Date IL RESP. Divisione Costruzioni Division Head IL RESP. DEL CENTRO Managing Director 2/11/2007 Ing. Mele P. Cau Pag / Pag