Prof. Dr. Ing. RAFFAELE LANDOLFO ELENCO DELLE PUBBLICAZIONI
|
|
- Serafina Patti
- 6 anni fa
- Visualizzazioni
Transcript
1 Prof. Dr. Ing. RAFFAELE LANDOLFO ELENCO DELLE PUBBLICAZIONI
2 SIMBOLI E CONVENZIONI Le pubblicazioni riportate nel presente elenco sono suddivise in raggruppamenti omogenei secondo il seguente schema: A. Pubblicazioni su riviste internazionali B. Pubblicazioni su riviste nazionali C. Atti di Congressi e Workshop internazionali D. Atti di Congressi e Workshop nazionali E. Capitoli di libri internazionali e nazionali F. Libri G. Rapporti di ricerca e documenti normativi H. Varie Nell ambito di ogni raggruppamento, sono indicati per ogni pubblicazione: numero progressivo di identificazione, in ordine cronologico; autore/i; titolo (in corsivo) e riferimento (rivista, congresso, luogo, anno, etc); L asterisco (*) contraddistingue: - pubblicazioni su riviste nazionali di articoli già pubblicati su riviste internazionali o nazionali - atti di congressi pubblicati successivamente su riviste Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 2/38
3 A. PUBBLICAZIONI SU RIVISTE INTERNAZIONALI A.01 A.02 De Martino A. A.03 A.04 Ghersi A. A.05 A.06 A.07 A.08 A.09 Moen L.A. Hopperstad O.S. Langseth M. A.10 A.11 Milev J. A.12 A.13 Calado L. Sur le comportement au flambement des profils tubulaires formés à froid (Construction Métallique, n. 4, France, 1990, pp ). The use of the Ramberg-Osgood law for materials of round-house type (Materials and Structures, n. 23, France, 1990, pp ). The influence of the variation through the thickness of residual-stresses in tubular columns (Journal of Constructional Steel Research, Vol. 19, n. 1, Elsevier Science Limited, Great Britain, 1991, pp ). Buckling modes of double-channel cold-formed beams (Thin-Walled Structures 19, Elsevier Science Limited, Great Britain, 1994, pp ). On the shear flexibility of corrugated steel panels (Steel Structures, Journal of Singapore Structural Steel Society, Vol. 6, 1995, pp ). Different approaches in the design of slender aluminium alloy sections (Thin-Walled Structures, Elsevier Science Limited, Great Britain, Vol.17, No. 1, 1997, pp ). Structural behaviour of sandwich panel shear walls: An experimental analysis (Materials and Structures, Vol. 32., 1999, pp ). Mechanical fasteners for cladding sandwich panels: interpretative models for shear behaviour (Thin-Walled Structures, Elsevier Science Limited, Vol. 35, No. 1, 1999, pp.61-79). Rotational capacity of aluminum beams under moment gradient. II: Numerical simulations (Journal of Structural Engineering, ASCE, Vol. 125 No.8, August 1999, pp ). Modelling of lightweight sandwich shear diaphragms for dynamic analyses (Journal of Constructional Steel Research, Vol. 53, Elsevier Science Limited, Great Britain, 2000, pp ). Q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches" (Acta Polytechnica, Journal of Czech Technical University, Vol.39, No. 5, 1999, pp ). Diaphragm action of sandwich panels in pin-jointed steel structures: a seismic study (Journal of Earthquake Engineering, Vol.4, No.3, 2000, pp ). Experimental response of top and seat angle semi-rigid steel frame connections (Material and Structures, Vol.33, 2000, pp ). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 3/38
4 A.14 Moen L.A. Langseth M. Hopperstad O.S. A.15 A.16 A.17 A.18 A.19 Manganiello M. A.20 Faggiano B. A.21 Manganiello M. A.22 A.23 A.24 Guerrieri M.R. A.25 Cross-sectional classification for aluminum beams - Parametric study (Journal of Structural Engineering, ASCE, Vol. 127(3), 2001, pp ). Seismic analysis of MR steel frames based on refined hysteretic models of connections (Journal of Constructional Steel Research, Vol. 58, Elsevier Science Limited, Great Britain, 2002, pp ). Seismic response of MR steel frames with low-yield steel shear panels (Engineering Structures, Vol. 25, Elsevier Science Limited, Great Britain, 2003, pp ). Post-earthquake fire resistance of moment resisting steel frames (Fire Safety Journal, Vol.38., Elsevier Science Limited, Great Britain, 2003, pp ). Shear experimental response of new connecting systems for cold-formed structures (Journal of Constructional Steel Research, Vol. 60, Elsevier Science Limited, Great Britain, 2004, pp ). Inelastic behaviour of I-shaped aluminium beams: numerical analysis and cross-sectional classification (Computers and Structures, Vol. 82, Elsevier Science Limited, Great Britain, 2004, pp ). Behaviour of aluminium alloy structures under fire (Journal of Civil Engineering and management, Vol. X, No. 3, Vilnius, Lituania, 2004, pp ). Inelastic flexural strength of aluminium alloys structures (Engineering Structures, Vol. 28, Elsevier Science Limited, Great Britain, 2006, pp ). Seismic behavior of sheathed cold-formed structures: Numerical study (Journal of Structural Engineering, ASCE, Vol. 132, No.4, 2006, pp ). Seismic behavior of sheathed cold-formed structures: Physical tests. (Journal of Structural Engineering, ASCE, Vol. 132, No.4, 2006, pp ). The Umberto I Gallery in Naples: the influence of corrosion damage on the seismic performance of the iron roofing structure (Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 347, 2007, pp ). Experimental tests on typical screw connections for cold-formed steel housing (Engineering Structures, Vol. 29(8), Elsevier Science Limited, Great Britain, 2007, pp ). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 4/38
5 A.26 Guerrieri M.R. A.27 Cascini L. A.28 Faggiano B. Esposto M. Perotti F. Barbella G. A.29 Guerrieri M.R. A.30 Iuorio O. A.31 Iuorio O. A.32 Krstevska L. Tashkov L. Gramatikov K. Mazzolani F. A.33 Cascini L. A.34 A.35 D Aniello M. Laser welded built-up cold-formed steel beams: experimental investigations (Thin- Walled Structures, Elsevier Science Limited, Vol. 46, Issue: 7-9, 2008, pp ). An integrated approach to durability design of steel structures against atmospheric corrosion (Key Engineering Materials, Trans Tech Publications, Switzerland, Vol , 2008, pp ). Structural analyses of the Submerged Floating Tunnel prototype in Qiandao Lake (PR of China). (Advances in Structural Engineering, ISSN , Vol. 11, No. 4., 2008, pp ). Experimental investigation on laser welded connections for built-up cold-formed steel beams (Journal of Constructional Steel Research, Elsevier Science Limited, Vol. 65, Issue: 7-9, 2009, pp ). Sheathed cold-formed steel housing: A seismic design procedure (Thin-Walled Structures, Elsevier Science Limited, Vol. 47, 2009, pp ). A specific procedure for seismic design of cold-formed steel housing (Advanced Steel Construction, Elsevier Science Limited, Vol. 6, 2010, pp ) Large-scale experimental investigation on Mustafa Pasha Mosque (Journal of Earthquake Engineering, ISSN , Taylor & Francis, Vol. 14, 2010, pp ) Modeling of metal structure corrosion damage: A state of the art report (Sustainability, ISSN , Vol. 2, 2010, pp ) Displacement-based seismic design of braced steel structures (Steel Construction Design and Research, ISSN , Vol. 3, September 2010, pp ) Experimental investigation on shear behaviour of riveted connections in steel structures (Engineering Structures, Elsevier Science Limited, ISSN , Vol. 33, February 2011, pp ) Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 5/38
6 A.36,,,, Krstevska L., Tashkov L., Gramatikov K.. A.37, D'Aniello M.,, A.38, Cascini L., A.39, Iuorio O., Seismic Retrofitting of Mustafa Pasha Mosque in Skopje: Finite Element Analysis (Journal of Earthquake Engineering, Taylor and Francis group, ISSN: , Vol 15, May 2011, pp ) Review of steel buckling-restrained braces (Steel Construction Design and Research, ISSN , Vol. 4, June 2011, pp ) Sustainability of steel structures: towards an integrated approach to life-time engineering design (Frontiers of Architecture and Civil Engineering in China, ISSN , Volume 5, Number 3, September 2011, pp ) Seismic analysis of sheathing-braced cold-formed steel structures (Engineering Structures, Elsevier Science Limited, ISSN , Volume 34, January 2012, pp ) A.40 Construction Parasismique, Plus fort que Poséidon! (Chantiers & Renovation, Publi Annonces SA, N 3, March 2012, pp ) A.41 D'Aniello M.,, Piluso V., Rizzano G. Ultimate behavior of steel beams under non-uniform bending (Journal of Constructional Steel Research, Elsevier Ltd., n. 78 (2012), p.p A.42 Construction parasimique en acier (Construire en acier Construction parasismique, Conception et dimensionnement, Centre suisse de la construction métallique, Stahlbau Zentrum Schweiz, Centro svizzero per la costruzione in acciaio., n /11 steeldoc, p.p A.43 Erdbebensicher Bauen in Stahl (Construire en acier Erdbebensicher Bauen, Konzeption und Tragwerksplanung, Stahlbau Zentrum Schweiz, Centre suisse de la construction métallique, Centro svizzero per la costruzione in acciaio, n /11 steel doc, p.p A.44 Steel & Earthquake: Research and Standards (Steel Construction Design and Research, ISSN , Vol. 4, June 2011, pp ) B. PUBBLICAZIONI SU RIVISTE NAZIONALI B.01 B.02 Mazzolani F. M Il comportamento strutturale delle leamiere grecate di terza generazione (Acciaio, n. 2, Febbraio, 1988, pp ). Indagine sperimentale su lamiere grecate tipo TRP 200 (Acciaio, n. 1, Gennaio, 1989, pp. 1-11). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 6/38
7 B.03* De Martino A. B.04 B.05* Mazzolani F. M B.06 B.07 Ghersi A. B.08 Mazzolani F. M B.09 Ghersi A. B.10 Calderoni B. De Martino A. B.11 B.12 La Veglia M. B.13 B.14 Foraboschi P. Differenti modellazioni della legge di Ramberg-Osgood per le leghe di alluminio (Alluminio Magazine n. 5/6, 1989, pp ). Sistemi misti acciaio-calcestruzzo con l impiego di lamiere grecate di terza generazione: indagine sperimentale (Acciaio, n. 1, Gennaio, 1990, pp. 1-10). Sistemi misti acciaio-calcestruzzo con l impiego di lamiere grecate di terza generazione: indagine sperimentale (1 a parte in Lamiera, n. 11, 1991, pp , 2 a parte in Lamiera, n. 2, 1992, pp ). Modelli teorici e numerici per la valutazione del comportamento flessionale della sezione mista calcestruzzo-trp 200 (L Edilizia n. 9, Settembre, 1991, pp ). Aspetti innovativi dell EC3 nella verifica delle sezioni in parete sottile (Costruzioni Metalliche, n. 5, 1992, pp ). Comportamento flessionale di lamiere grecate in acciaio: analisi sperimentale (Costruzioni Metalliche, n. 1, 1995, pp ). Thin-walled sections in round-house type material: a simulation model (Costruzioni Metalliche n.6, 1996, pp.17-27). Il comportamento sismico di telai in profili sottili:limiti di servizio e definizione del fattore di struttura (Costruzioni Metalliche, n.2, 1999, pp.49-55). L'effetto collaborante dei pannelli di chiusura negli edifici a struttura di acciaio soggetti ad azioni sismiche (Costruzioni Metalliche, n.4, 1999, pp.63-74). Grattacielo in fiamme a Napoli: quando il rischio viene gestito male (Antincendio, n.10, 2000, pp.79-88). Attualità e prospettive dei sistemi costruttivi cold-formed (Costruzioni Metalliche, n.1, 2002, pp.33-50). Comportamento strutturale di volte a padiglione con e senza rinforzi in FRP (Costruire in laterizio, n.95, settembre/ottobre 2003, pp.68-73). B.15 L'evoluzione della normativa sismica (Costruzioni Metalliche, n.1, 2005, pp.54-66). B.16 Ghersi A. B.17 B.18 Il contributo strutturale dei pannelli di completamento sulla risposta sismica dei telai di acciaio (Ingegneria Sismica, n.1, 2005, pp.14-25). Comportamento sismico di edifici residenziali in acciaio con pareti a taglio con pareti a taglio in profili formati a freddo e pannelli di rivestimento (Costruzioni Metalliche, n.6, 2005, pp.47-62). Ancoraggi a trazione e a taglio per edifici residenziali in acciaio con pareti a taglio in profili formati a freddo e pannelli di rivestimento (Progetti&Tecnologie, n.7, Maggio 2006, pp.16-19). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 7/38
8 B.19 Faggiano B. Esposto M. A Submerged Floating Tunnel (Archimedes Bridge) prototype in the Qiandao Lake (PR of China): research development and basic design (Costruzioni Metalliche, n.6, 2007, pp.45-63). B.20 Molto bravo a neutralizzare il sisma (Il Giornale dell Architettura, n.58, 2008, Rapporto Metalli, p.8). B.21 Acciaio e Ricerca (Costruzioni Metalliche, n.1, 2008, pp.57-73). B.22 Iuorio O. Leggere e sismo-resistenti (Modulo, n. 356, 2009, pp ) B.23 Acciaio e Sisma (Costruzioni Mettaliche, n. 6, 2009, pp ) B.24 Competitivo e affidabile (Arketipo, Anno 5, n. 45, 2010, pp ) B.25 Cascini L. D Aniello M. B.26 Ferracuti B. Gli effetti del degrado da fatica e corrosione sui ponti ferroviari in carpenteria metallica: un approccio integrato per la valutazione della vita residua (Costruzioni Mettaliche, n. 6, 2010, pp ) Le strutture metalliche: sostenibilità ed efficienza (Il Giornale dell Ingegnere, n. 16, Ottobre, 2010, pp. 7) B.27 Progettare con l acciaio in zona sismica in accordo alle NTC (Il Giornale dell Ingegnere, n. 16, Ottobre, 2010, pp ) B.28 Cascini L., D Aniello M., B.29,, Iuorio O. Gli effetti del degrado da fatica e corrosione sui ponti ferroviari in carpenteria metallica: un approccio integrato per la valutazione della vulnerabilità (Rivista italiana della saldatura, n. 3, Maggio-Giugno, 2011, pp ) Progetto, realizzazione e collaudo della nuova scuola Bfs in Lago Patria, Napoli (Costruzioni Mettaliche, n. 6, Novembre-Dicembre, 2011, pp ) C. ATTI DI CONGRESSI E WORKSHOP INTERNAZIONALI C.01 C.02* C.03 C.04 De Martino A. Ghersi A. The consequence of the design criteria on the seismic behaviour of steel frames (9th European Conference on Earthquake Engineering, Moskow, September, 1990, Vol. 2, pp ). The influence of the variation through the thickness of residual stresses in tubular columns (International Colloquium on Stability of Steel Structures, Budapest, April, 1990, Vol. 3, pp ). Behaviour of 3rd generation trapezoidal steel sheetings (Testing of Metals for Structures, RILEM Proceedings 12, E & FN Spon, London, 1990, pp ). Bending behaviour of long-span steel sheeting: test and simulation (International Conference on Steel and Aluminium Structures, Singapore, May, 1991, Elsevier Applied Science, London, 1991, pp ). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 8/38
9 C.05 Calderoni B. Lenza P. C.06 De Martino A. Ghersi A. C.07 De Martino A. C.08* Ghersi A. C.09 Ventrella E. C.10 C.11 Calderoni B. De Martino A. Ghersi A. C.12 C.13 C.14* C.15 C.16 C.17 Comparative analysis of seismic elastoplastic behaviour of reinforced concrete and steel frames (10th World Conference on Earthquake Engineering, Madrid, July, 1992, A. A. Balkema, Rotterdam, 1992, Vol. 7, pp ). Calibration of a bending model for cold-formed sections (11 th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, October, 1992, pp ). Cold-formed steel sections: the state of the art in Italy (First World Conference on Constructional Steel Design, Acapulco, November, 1992, Elsevier Applied Science, London, 1992, pp ). Buckling modes of double-channel cold-formed beams (First International Conference on Coupled Instabilities in Metal Structures, Timisoara, October, 1992). Qualification analysis of a new structural system (IV International Conference on Space Structures, University of Surrey, September, 1993, Thomas Telford Service, London, 1993, Vol. 1, pp ). Shear behaviour of steel corrugated panels (I International Whorkshop and Seminar on Behaviour of Steel Structures in Seismic Areas, Timisoara, June, 1994, E & FN Spon, London, 1995, pp ). On the seismic resistance of light gauge steel frames (I International Whorkshop and Seminar on Behaviour of Steel Structures in Seismic Areas, Timisoara, June, 1994, E & FN Spon, London, 1995, pp ). Ultimate behaviour of trapezoidal steel sheets in bending (12th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, October, 1994, pp ). Shear tests on sandwich panel connections (Second state of the art whorkshop COST C1, Prague, October, 1994, European Commission, Brussels, pp ). Different approaches in the design of slender alluminium alloy sections (International Conference on Steel and Aluminium Structures, Istanbul, May, 1995, pp ). The influence of connecting system on the shear flexibility of corrugated steel panels (IX International Conference on Metal Structures, Krakow, June, 1995, pp ). The characterisation of equivalent orthotropic plate for corrugated shear panels (International Colloquium on Stability of Steel Structures, European Session, Budapest, September, 1995, Vol. 2, pp ). Finite element analysis of shear steel panels (4th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No , 1996, pp.45-56). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 9/38
10 C.18 Del Ponte R. C.19 Del Ponte R. C.20 C.21 Dubina D. Goina D. Ungureanu V. C.22 C.23 C.24 C.25 C.26 C.27 C.28 Calderoni B. De Martino A. Ghersi A. C.29 Experimental analysis on sandwich panel-to steel frame connecting systems (4th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No , 1996, pp.65-74). Monotonic and cyclic tests on sandwich panels in shear (4th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No , 1996, pp.75-88). Wrinkling analysis of lightweight sandwich panels (4 th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No , 1996, pp.57-64). Coupled instability of thin-walled cold-formed beams (II International Conference on Coupled Instabilities in Metal Structures, Liege, September, 1996, pp ). The stiffening effect of cladding panels on steel building: the ECSC research project in progress (International Workshop on Thin-Walled Structures, Kreisau, September, 1996, pp ). Analytical models for cladding panels under monotonic and cyclic loads (5th International Colloquium on Structural Stability S.S.R.C., Brazilian Session, Rio de Janeiro, August, 1996, pp ). Monotonic behaviour of fastening systems for sandwich panels (IABSE International Conference on Composite Construction Conventional and Innovative, Innsbruck, Austria, September 16-18, 1997, pp ). Influence of welding on stability of aluminium thin plates (5th International Colloquium on Stabilty and ductility of steel Structures SDSS 97, Nagoya, JAPAN, July 29-31, 1997, pp ). Hysteretic behaviour of fastening in sheeting (Proceedings of STESSA 97 - Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp ). Dynamic behaviour of sandwich diaphragms in simple pin-jointed steel frames, (Proceedings of STESSA 97 Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp ). Influence of local buckling on the global seismic performance of light gauge portal frames (Proceedings of STESSA 97 - Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.29-40). Experimental shear response of a single sandwich panel (Proceedings of Experimental Model Research and Testing of Thin-Walled Structures, Prague, Czech Republic, September, 1997, pp ). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 10/38
11 C.30 C.31 C.32 C.33 Moen L.A. Hopperstad O.S. Langseth M. C.34 Piluso V. Hopperstad O.S Langseth M. C.35* Milev J. C.36 C.37 Calado L. C.38 Fulop L. Dubina D. C.39 Piluso V. C.40 C.41 Calado L. Diaphragm effect for industrial steel buildings under earthquake loading (Proceedings of II World Conference on Constructional Steel Design, San Sebastian, May 1998 in Journal of Constructional Steel Research, Elsevier, 1998, 46:1-3, Paper No. 401). Dynamic response of infilled multistorey steel frames (Proceedings of XI European Conference on Earthquake Engineering, Paris, 6-11 September, 1998). Cyclic models for shear diaphragms with different connecting systems (Proceedings of COST C1 International Conference, Liège, September 1998, pp ). A parametric study on the rotational capacity of aluminium beams using non-linear FEM (Proc. of International Conference on Steel and Aluminium Structures, Espoo (Finland) June 20th 23th, 1999, pp ). EC9 provisions for flat internal elements: comparison with experimental results (Proc. of International Conference on Steel and Aluminium Structures, Espoo (Finland) June 20th 23th, 1999, pp ). q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches (Proc. of 2nd European Conference on Steel Structures (Eurosteel 99), Prague, May, 26th 29th, Paper 221, 1999). Cladding Panel Action in Drift Control of Seismic Resistant Steel Frames (Proc. of 2nd European Conference on Steel Structures (Eurosteel 99), Prague, May, 26 th 29th, Paper 163, 1999). Cyclic behaviour of steel beam-to-column connections: interpretation of experimental results (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS 99), Timisoara (Romania), September, 9th 11th, 1999, pp ). Seismic response of MR steel frames with different connection behaviours (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS 99), Timisoara (Romania), September, 9th 11th, 1999, pp ) Local buckling of aluminium channels: tests and simulation (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS 99), Timisoara (Romania), September, 9th 11th, 1999, pp ). Influence of different hysteretic behaviours on seismic response of SDoF systems (Proc. of 12 th World Conference on Earthquake Engineering, 12WCEE, Auckland, New Zealand, 30 January- 4 February 2000). Fracture resistance design of bolted joints (Proc. of 2nd Conference Construcao Metàlica e Mista, Coimbra, (Portugal, November, 18th 19th, 1999, pp ). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 11/38
12 C.42 Dubina D. Stratan A. Seismic Performance of Dual Steel Moment-Resisting Frames. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), August, 2000, Balkema pp ). C.43 Calado L. C.44 C.45 Faggiano B. C.46 Cyclic Behaviour of Semi-Rigid Angle Connections: a Comparative Study of Tests and Modelling. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), August, 2000, Balkema pp ). The effect of connection hysteretic behaviour on seismic damage to moment resisting steel frames. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), August, 2000, Balkema pp ). Comparative Study on Seismic Design Procedures for Steel MR Frames according to the Force-Based Approach (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), August, 2000, Balkema pp ). Inelastic Behaviour of Hollow Rectangular Shaped Aluminium Beams (Proc. of the 5th International Conference on Computational Structures Technology, CST 2000, Leuven (Belgium), 6-8 September, 2000, pp ). C.47 Coupled Instabilities in Non Linear Materials (Proc. of III International Conference on Coupled Instabilities in Metal Structures, General Report, Lisbon, September, 2000, pp ). C.48 C.49 C.50 Faggiano B. C.51 De Rosa V. C.52 C.53 Seismic analysis of MR steel frames based on refined hysteretic models of connections (Proc. of the International Conference on Structural Engineering SEMC 2001, Cape Town, April, 2001, pp ). Contributing effects of cladding panels in the seismic design of MR steel frames (Proc. of the International Conference on Structural Engineering SEMC 2001, Cape Town, April, 2001, pp ). A survey on ductile design of mr steel frames (Proc. of the International Conference on Structural Engineering SEMC 2001, Cape Town, April, 2001, pp ). Rotational capacity of I-shaped aluminium beams: a numerical study (Proc. of III Int. Conf. On Thin-Walled Structures, Cracow, Poland, 5-7 June 2001, pp ) Post-earthquake fire resistance of steel structures (Proc. of the European Conference on Safety and Reliability, ESREL 2001, Torino, September, 2001, pp ). Experimental analysis of aluminium T-Stubs: framing of the research activity (Proc. of INALCO, Monaco, March 2001, pp ). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 12/38
13 C.54 Faggiano B. C.55 C.56 Faggiano B. C.57 C.58 C.59 C.60 Faggiano B. Design and modelling aspects concerning the submerged floating tunnels: an application to the Messina Strait crossing (Proc. of IV Symposium on Strait Crossings, Bergen, Norway, September 2001, pp ) Global stability of MR steel frames under seismic actions (Proc. of 12th European Conference on Earthquake Engineering, London, September, 2002, Elsevier Science Ltd,. CD-ROM: paper n.307 ). Seismic analysis and design of steel MR frames with dog-bone connections Proc. of 12th European Conference on Earthquake Engineering, London, September, 2002, Elsevier Science Ltd,. CD-ROM: paper n.309). Study of innovative built-up cold-formed beams (Proc. of 16th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2002, pp ). Practical application of dissipative shear walls in seismic design of steel frames: a comparative study (Proc. of International Colloquium on Stability and Ductility of Steel Structures, SDSS 2002, Budapest, September, 2002, pp ). Comparative study of new connecting systems for cold-formed structures (Proc. of International Conference on Steel Structures, Eurosteel 2002, Coimbra, September, 2002, pp ). On the efficacy of design methods for steel moment resisting frames according to Eurocode (Proc. of International Conference on Steel Structures, Eurosteel 2002, Coimbra, September, 2002, pp ). C.61 Manganiello M. C.62 Manganiello M. C.63 De Martino A. C.64 C.65 Inelastic behaviour of I-shaped aluminium beams (Proc. of Sixth International Conference on Computational Structures Technology, CST 2002, Prague, September, 2002, CD-ROM). A new classification criterion for aluminium cross-sections (Proc. of International Conference on Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA'03, Sydney, Australia, June, 2003, pp ). Numerical modelling of thin-walled cold-formed steel C-sections in bending (Proc. Of International Conference on Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA'03, Sydney, Australia, June, 2003, pp ). Seismic performance of steel stud shear walls: planning of testing program (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas",STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp ) Fire resistance of MR steel frames damaged by earthquakes (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.73-79) Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 13/38
14 C.66 Calderoni B. Faggiano B. Panico S. C.67 Faggiano B. de la Grennelais E. C.68 Manganiello M. C.69 C.70 C.71 Faggiano B. C.72 C.73 Manganiello M. C.74 Faggiano B. C.75 C.76 Full-scale testing of different seismic upgrading techniques on an existing RC building (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp ) Design criteria for RBS in MR frame retrofitting (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp ) Numerical evaluation of required ductility and load bearing capacity for aluminium alloy continuos beams (Proc. of Ninth International Conference on Civil and Structural Engineerig, CC03, Egmond aan Zee, The Netherlands, September, 2003, paper n.31). Finite element model of a brick masonry four-sided cloister vault reinforced with FRPs (Proc. of Ninth International Conference on Civil and Structural Engineerig, CC03, Egmond aan Zee, The Netherlands, September, 2003, paper n.100.). Cold-formed steel structures: advances in research and design (Proc. of International Colloquium on Recent Advances and New Trends in Strucutral Design, Timisoara, May, 2004, pp.59-70). Effects of high temperatures on the resistance of aluminium alloy structures (Proc. of International Conference on Modern Building Materials Structures and Techniques, Vilnius, May 2004, pp ). On the characterization of the material properties for cold-formed steel members (Proc. of IV International Conference on Thin Walled Structures, Loughborough, Uk, June, 2004, pp ). Eurocode 9 approach for cross-sectional classification of aluminium alloy members (Proc. of INALCO, Usa, June, 2004). The influence of material modelling on the fire resistance of aluminium alloy structures (Proc. of INALCO, Usa, June, 2004). Testing of sheathed cold-formed steel stud shear walls for seismic performance evaluation (Proc. of 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, 2004 Paper No. 2697). Local Buckling phenomena in built-up cold-formed beams: experimental and numerical investigations (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp ). ISBN: Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 14/38
15 C.77 Manganiello M. C.78 De Martino A. C.79 C.80 C.81 Manganiello M. C.82 C.83 Faggiano B. C.84 C.85 Faggiano B. C.86 Faggiano B. C.87 C.88 Faggiano B. Local to flexural-torsional buckling interaction in aluminium alloy beams. (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp ). ISBN: Numerical modelling of thin-walled cold-formed steel C-sections in bending. (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp ). ISBN: Cold-formed steel housing in seismic areas. (Proc. of 32 IAHS World Congress, Trento, September, 2004, paper. n.101) Seismic performance of sheated cold-formed shear walls (Proc. of 17th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2004, pp ). Numerical analysis of the steel roofing structure of the Umberto I Gallery in Naples (Proc. of International Specialty Conference on Structural Analysis of Historical Constructions, Padova, November, 2004, pp ). Seismic response of light-gauge steel stick-built constructions: a research project. (Proc. of COST C12 Final Conference, Innsbrunck, January, 2005, pp ). On the fire resistance of aluminium alloy structures (Proc. of COST C12 Final Conference, Innsbrunck, January, 2005, pp ). Experimental and numerical tests on sheathed steel stick-built constructions. (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. A, ). ISBN: Post-earthquake fire resistance of moment resisting steel frames (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. C, ). ISBN: Dog-bone technique for the seismic improvement of steel moment resisting frames (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. C, ). ISBN: Finite element modelling procedures for innovative built-up cold-formed beams (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. A, ). ISBN: The SFT: an innovative solution for waterway strait crossings (Proc. of IABSE Symposium Conference Structures and extreme events, Lisbon, September, 2005, LIS 146). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 15/38
16 C.89 C.90 C.91 Formisano A. Faggiano B. C.92 C.93 Guerrieri M.R. C.94 PortioliF. C.95 Iuorio O. C.96 C.97 Krstevska L. Taskov Lj. Gramatikov K. C.98 Faggiano B., Esposto M.,, Experimental tests on sheathing-to-stud screw connections (Proc. of XI International Conference on Metal Structures, ICMS 2006, Rzeszow, June, 2006, Taylor & Francis Group, London, pp ). ISBN: Shear behavior of connections between cold-formed steel profiles and wood or gypsum based panels: an experimental investigation (Proc. 17th A&C Specialty Conference - ASCE 2006 Structures Congress, St. Louis, Missouri, May, 2006). Ductile behavioural classes of steel members for seismic design (Proc. of 5 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2006, Yokohama (Japan), August, 2006, Taylor & Francis Group, London, 2006 pp ). ISBN: Seismic response of steel frame/panel shear walls: modelling based on screw connection tests (Proc. of 5 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2006, Yokohama (Japan), August, 2006, Taylor & Francis Group, London, 2006 pp ). ISBN: Lap-shear tests on laser welded connections for built-up cold-formed steel beams (Proc. of International Conference in Metal Structures, ICMS 2006, Poiana Brasov, Romania, September 2006, Taylor & Francis Group, London, 2006, pp ). ISBN: Experimental investigation on the load bearing capacity of built-up cold-formed steel beams (Proc. of International Colloquium on Stability and Ductility of Steel Steel Structures, SDSS 2006, Lisbon, September, 2006, IST PRESS, Lisbon pp ). ISBN: Cold-Formed Steel Housing (Proc. of 34 IAHS World Congress Sustainable Housing Design: Emphasizing Urban Housing", Naples, September, 2006, paper n. 46/A). ISBN: Lateral response of sheathed cold-formed shear walls: an analytical approach (Proc. of 18th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2006, pp ). Experimental and numerical investigations on the Mustafa Pasha Mosque large scale model. (Proc. of COST Action C26 Urban Habitat Constructions Under Catastrophic Events Workshop, Prague, March 2007, pp ). ISBN: Fire analysis on steel poral frame damaged after earthquake according to performance based design (Proc. of COST Action C26 Urban Habitat Constructions Under Catastrophic Events Workshop, Prague, March 2007, pp ). ISBN: Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 16/38
17 C.99 Iuorio O.,., C.100* Guerrieri M.R. C.101 C.102 Iuorio O. C.103 C.104 Guerrieri M.R. C.105 Brescia M. C.106 Cascini L. C.107 Cascini L. C.108 Iuorio O. C.109 Seismic design of cold-formed steel housing: a case study (Proc. of COST Action C26 Urban Habitat Constructions Under Catastrophic Events Workshop, Prague, March 2007, pp ). ISBN: Laser welded built-up cold-formed steel beams: experimental investigations (Proc. of The Professor Jim Rhodes Retiral Conference, Glasgow, June Bending strength of buil-up cold-formed steel members stiffened by diagonal web beads (Proc. of International Conference on Steel and Aluminium Structures, ICSAS 07, Oxford, 2007, pp ). ISBN: Seismic design of cold-formed steel housing: an analytical approach based on screw connection tests (Proc. of International Conference on Steel and Aluminium Structures, ICSAS 07, Oxford, 2007, pp ). ISBN: Nomographs for seismic design of single-storey sheathed cold-formed frame structures (Proc. of International Conference on Recent Developments in Strucutral Engineering, Mechanics and Computation, CapeTown, September 2007, Millpress, Rotterdam, pp ). Finite element modeling of laser welded connections for built-up cold-formed steel beams (Proc. of The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, Sept., 2007, Civil-Comp Press. Paper n. 148). On the classification of steel members in seismic areas (Proc. of The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, Sept., 2007, Civil- Comp Press. Paper n. 202). Durability design of metal structures based on lifetime safety factor method (Proc. of International Conference on Sustainable Construction, Material and Practices, SB07, Lisbon, 2007, pp ). ISBN: Modelling of corrosion damage for metal structures (Proc. of International First Workshop COST Action C25, Lisbon, September 2007, pp ). ISBN: A specific procedure for the seismic design of cold-formed steel housing (Proc. of 5 th International Conference on Advances in Steel Structures, ICASS07, Singapore, December 2007, pp ). ISBN: Finite element and limit analysis of the large scale model of Mustafa Pasha mosque in Skopje strengthened with FRP (Proc. of the First Asia-Pacific Conference on FRP in Structures, Hong Kong, December 2007, pp ). ISBN: Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 17/38
18 C.110 Krstevska L. Tashkov Lj. Gramatikov K. C.111 D'Aniello M. C.112 Iuorio O. C.113 Guerrieri M.R. C.114 Mandara A. Shaking table tests on the large scale model of Mustafa Pasha Mosque without and with FRP (Proc. of the Sixth International Conference on Structural Analysis of Historic Construction Preserving, Safety and Significance, Bath, July 2008, Taylor & Francis Group, London, 2008, pp ). ISBN Structural performance of riveted connections in historical metal structures (Proc. of the Sixth International Conference on Structural Analysis of Historic Construction Preserving, Safety and Significance, Bath, July 2008, Taylor & Francis Group, London, 2008, pp ). ISBN Cold-formed steel housing in seismic zone: a design procedure (Proc. of 5 th International Conference on Thin-Walled Structures ICTWS Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp ). ISBN Flexural strength of innovative built-up cold-formed steel beams assembled by laser welding (Proc. of 5 th International Conference on Thin-Walled Structures ICTWS Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp ). ISBN The EC9 Approach to Thin-Walled Structures (Proc. of 5 th International Conference on Thin-Walled Structures ICTWS Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp ). ISBN C.115 Di lorenzo G. Numerical analysis of local buckling in built-up cold-formed steel beams assembled by laser welding (Proc. of 5 th International Conference on Coupled Instabilities in Metal Structures CIMS Sydney, Australia, June 2008, The University of Sydney, Sydney, pp ). ISBN C.116 Guerrieri M.R. C117 D Aniello M. C118 D Aniello M. Cascini L. Performance of built-up cold-formed steel beams assembled with mechanical and laser welded connections (Proc. of 5 th European Conference on Steel and Composite Structures Eurosteel Graz, Austria, September 2008, ECCS, Brussels, pp.69-74). ISBN Riveted connections in historic metal strucutures: an experimental study (Proc. of 5 th European Conference on Steel and Composite Structures Eurosteel Graz, Austria, September 2008, ECCS, Brussels, pp ). ISBN Vulnerability assessment of a historic railway bridge (Proc. of 5 th European Conference on Steel and Composite Structures Eurosteel Graz, Austria, September 2008, ECCS, Brussels, pp ). ISBN Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 18/38
19 C119 Ly L., Demonceau J.F., Jaspart J.P. Experimental and numerical investigations on iron columns reinforced by FRP under axial compression (Proc. of the International Colloquium Seismic Risk Eearthquakes in North West Europe, Liège, September 2008, pp ) C.120 Vesikari E. C.121 Vesikari E. C.122 Negro P. Mola E. Cascini L. C123 Iuorio O. C124 Piluso V. Brescia M. D Aniello M. Tortorelli S. C125 Formisano A. Florio G. C126 C127 C128 Annecchiarico M. State-of-the-art report on service life design methods (Proc. of International Seminar on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp ). ISBN: Durability and service life prediction methodologies (Proc. of International Seminar on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp ). ISBN: Life-cycle assessment of the Spear buildings (Proc. of International Seminar on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp ). ISBN: Experimental response of connections between cold-formed steel profile and cement-based panel (Proc. of 19th International Specialty Conference on Cold Formed Steel Structures, St. Louis, October, 2008, pp ). Rotation capacity vs. demand of steel beams under catastrophic enents (Proc. of Urban Habitat Costructions Under Catastrophic Events, COST Action C26 Malta, October, 2008, pp ). ISBN The Vesuvius risk scenario: the seismic vulnerability of the palazzo di città in Torre del Greco (NA) (Proc. of Urban Habitat Costructions Under Catastrophic Events, COST Action C26 Malta, October, 2008, pp ). ISBN Analisi numerica della prestazione sismica del modello in grande scala della moschea di Mustafa Pasha in Skopje (Proc. of the Wondermasonary) Design of the retrofitting system with FRP of the Mustafa Pasha Mosque in Skopje by numerical models, (Proc. of III International Conference on Mechanics of masonry structures strengthened with composite materials - modeling, testing, design, control, MURICO 3, Venice, Italy, April 2009, pp ). ISBN X FE simulation of masonry wall samples of Mustafà Pasha mosque by homogeneus continuum models: Analysis and calibration (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 19/38
20 C129 D Aniello M. Cascini L. C130 C131 Parrilli M. D Aniello M. An integrated approach for the vulnerability assessment of a historical metal railway bridge (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN Numerical analysis of the large scale model of Mustafà Pasha Mosque in Skopje strengthened with FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN The seismic protection of Umberto I Gallery in Naples with FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN C132 Ly L., Demonceau J.F., Jaspart J.P. Proposed design rules for iron columns reinforced by FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN C133 D Aniello M. C134 Florio G. Formisano A. C135 Krstevska L. Tashkov Lj. Gramatikov K. C136 Martire G. Esposto M. Faggiano B. Zollo A. Stabile T.A. C137 Iuorio O. C138 Brescia M, Iannone F. Piluso V. Rizzano G. Experimental analysis of riveted connections in historic metallic structures (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN Vulnerability of a historical masonry building in the Vesuvius area (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN Shaking table test of Mustafà Pasha Mosque model in reduced scale (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, June 2009, pp ). ISBN The structural response of submerged floating tunnel to multi-support seismic excitations (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, June 2009, pp ). ISBN Seismic analysis of sheating-braced cold-formed steel structures (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, June 2009, pp ). ISBN Preliminary results of an experimental program of the cyclic response and rotation capacity of steeel members (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, June 2009, pp ). ISBN Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 20/38
21 C139 Gramatikov K. Taskov L. Krstevska L. Lazarov L. Kokalanov G. Dumova-Jovanoska E. Numerical and Experimental Analysis of Three Strengthening Techniques applied on Three Large Scale Models in the frame of PROHITECH project (Proc. Of 13th International Symposium of Macedonian Association of Structural Engineers (MASE), Skopje, Republic of Macedonia, 14th - 17th October 2009, pp ) ISBN C140 Durability Design of Metal Structures (Proc. of International Symposium on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Malta, 26 July 1 August 2010, pp ) ISBN C141 Plumier A. Dubina D. C142 Marmo R. D Aniello M. C143 Annecchiarico M. C144 D Aniello M. C145 Iuorio O. Macillo V. C146 Tortorelli S. D Aniello M. C147 Demands and recommendations for assessment and mitigation of risk under exceptional earthquakes (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Report, COST Action C26, Napoli, September 2010, pp ) ISBN Finite element modelling of lap shear riveted connections in fire (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Micro and macro-finite element modeling of brick masonry panels subject to lateral loadings (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Modelling issues of steel braces under extreme cyclic actions (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Seismic response of sheathed cold-formed steel structures under catastrophic events (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Lateral capacity of steel structures designed according to EC8 under catastrophic seismic events (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Seismic assessment of historical mosques under exceptional earthquakes: A case study in Skopje (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 21/38
22 C148 Krstevska L. Tashkov L. Naumovski N. Florio G. Formisano A. Fornaro A. In-situ experimental testing of four historical buildings damaged during the 2009 L Aquila earthquake (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN C149 Formisano A. Florio G. C150 Formisano A. Florio G. De Masi G. Delli Priscoli G. Indirli M. A quick methodology for seismic vulneradility assessment of historical masonry aggregates (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN Seismic vulnerability analysis of historical centres: A GIS application in Torre del Greco (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, September 2010, pp ) ISBN C151 Formisano A. Terracciano G. On the use of cold-formed thin walled members for vertical addition of existing masonry buildings (Proc. of International Colloquium Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, September 2010, pp ) ISBN C152 C153 C154 D Aniello M. Analysis of contact buckling in built-up cold-formed steel beams assembled by laser welding (Proc. of International Colloquium Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, September 2010, pp ) ISBN Displacement-based seismic design of steel braced structures (Proc. of International Symposium on Steel Structures: Culture e Sustainability, Istanbul, Turkey, September 2010, pp ) ISBN Simulation of inelastic cyclic behaviour of steel concentric bracings (Proc. of 14 Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August 03 September 2010, CD-ROM no. 1816) ISBN C155 Tashkov L. Naumovski N. Florio G. Formisano A. Fornaro A. Brando G. Experimental testing of historical buildings in Abruzzo region damaged during L' Aquila earthquake 2009 (Proc. of 14 Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August 03 September 2010, CD-ROM no. 1868) ISBN Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 22/38
PROPOSTE TESI 2014 LEGNO
Docenti proponenti: prof. Piazza -Tomasi PROPOSTE TESI 2014 LEGNO LEGNO 1 Docenti proponenti: prof. Piazza -Tomasi Ipotesi di periodo tesi: aprile ottobre 2014 PARETI A PANNELLO A TELAIO LIGNEO E XLAM
Dettagliwww.siea.eu - sez. A La Scuola 00 Riferimenti generali della Scuola- 00.1 - Pubblicazioni file: www.siea.eu A-00.1: LPM :
Elenco pubblicazioni sul Load Path Method [B1.2-2.4.1.13] G. C. Marano, F. Palmisano, A. Vitone: Utilizzo dello Strut and Tie model per la progettazione dei particolari costruttivi delle strutture in c.a..
DettagliIl legno e il fuoco C Protezione contro il fuoco delle strutture e della costruzione di legno
I corsi promo_legno (7 ottobre 2004) - 1 - I corsi promo_legno (7 ottobre 2004) - 2 - I corsi promo_legno (7 ottobre 2004) - 3 - I corsi promo_legno (7 ottobre 2004) - 4 - I corsi promo_legno (7 ottobre
DettagliCURRICULUM VITAE. Laurea in ingegneria civile (Università di Roma La Sapienza)
Nome: Cognome: Titoli accademici: Guido Bonin CURRICULUM VITAE Laurea in ingegneria civile (Università di Roma La Sapienza) Dottorato di ricerca in infrastrutture di viabilità e trasporto (Università di
DettagliPubblicazione ai sensi del Dlgs 33/2013
Pubblicazione ai sensi del Dlgs 33/2013 Consorzio per la Sperimentazione Edilizia SRL Nucleo Industriale di Bazzano - località Monticchio - 67100 L'AQUILA (C.F. e P.Iva 01777340660) Tel.: 0862.028090 fax:
DettagliANALISI DI PANNELLI MURARI RINFORZATI CON FRP SOGGETTI A SOLLECITAZIONI DI TAGLIO
Università degli Studi di Salerno Dipartimento di Ingegneria Civile WORKSHOP 12-13 13 febbraio 27 Materiali ed Approcci Innovativi per il Progetto in Zona Sismica e la Mitigazione della Vulnerabilità delle
DettagliProgramma pubblicazione Eurocodici Recepimenti, traduzioni, Corrigenda, Amendments, NDP, Appendici Nazionali. Pubblicazione CEN
Recepimenti, traduzioni, Corrigenda, Amendments,, Appendici Nazionali EN 1990 Eurocode - Basis of structural design EN 1990:2002 apr-02 NO mag-04 7 Approvata Assemblea EN 1991-1-1 Eurocode 1: Actions on
DettagliCURRICULUM VITAE ET STUDIORUM Alberto MANDARA, nato a Napoli il 4-4-1963
Prof.Dr.Ing. Alberto MANDARA Ordinario di Tecnica delle Costruzioni presso la Seconda Università di Napoli Viale degli Oleandri 9, I-80131 Napoli tel. +39 081 7410330 ab/st.; +39-392-8307374 mob.; e-mail:
DettagliL innovazione con l Acciaio Materiali e soluzioni Light Steel Framing. Lara Cappello lara-.cappello@arcelormittal.com 1
L innovazione con l Acciaio Materiali e soluzioni Light Steel Framing Lara Cappello lara-.cappello@arcelormittal.com 1 2 Riciclare?... Con 6 auto vecchie si può costruire una casa da 140 m2 (5t di acciao)
DettagliREte dei Laboratori. Universitari di Ingegneria. Sismica RELUIS
REte dei Laboratori Universitari di Ingegneria Sismica RELUIS Sviluppo di approcci innovativi per il progetto di strutture in acciaio e composte acciaio calcestruzzo calcestruzzo Coordinatori: F.M. Mazzolani
DettagliEnergy in Buildings and Communities
IEA Implementing Agreement Energy in Buildings and Communities Michele Zinzi, ENEA Giornata Nazionale IEA IA Ricerca Energetica e Innovazione in Edilizia ENEA, Roma, 27 febbraio 2015 Aspetti generali Fondato
DettagliCURRICULUM VITAE ET STUDIORUM
p r o f. i n g. R A F F A E L E L A N D O L F O O r d i n a r i o d i T e c n i c a d e l l e C o s t r u z i o n i U n i v e r s i t à d e g l i S t u d i d i N a p o l i F e d e r i c o I I CURRICULUM
DettagliTLC HIGH MASTS-STRUCTURES TORRI TELECOMUNICAZIONI - STRUTTURE
TLC HIGH MASTS-STRUCTURES TORRI TELECOMUNICAZIONI - STRUTTURE 78 79 NORMATIVE TORRI HIGH MASTS NORMS PROGETTAZIONE E RIFERIMENTI NORMATIVI Il dimensionamento delle torrifaro e la verifica delle sezioni
DettagliVerbale n. 2 del 19 aprile 2013
Selezione pubblica per il reclutamento di 1 posto di ricercatore con rapporto di lavoro subordinato a tempo determinato, per la durata di 3 anni, ai sensi dell art. 24, comma 3, lett. a) della Legge 240/2010
DettagliAnalytical and simulation performance models for software system analysis and prediction
Performance Evaluation of Complex Systems: Techniques, Methodologies and Tools Analytical and simulation performance models for software system analysis and prediction S. Balsamo, M. Marzolla, M. Simeoni
DettagliPresentazione attività sede di Messina
Presentazione attività sede di Messina I believes lightweight materials are the future Composite Materials Natural Composite Materials and Hybrid Structures RESEARCH TEAM DIECII Dipartimento di Ingegneria
DettagliQualità e sicurezza delle costruzioni leggere
Qualità e sicurezza delle costruzioni leggere prof. dr. eng. Ario Ceccotti Istituto per la valorizzazione del legno e delle specie arboree CNR IVALSA Il LEGNO è la sola risorsa fondamentale rinnovabile
DettagliGiornata della Ricerca
Giornata della Ricerca Gruppo di Tecnica delle Costruzioni Alghero, 2012 Le strutture in legno Massimo FRAGIACOMO Nicoletta TRULLI Giovanni RINALDIN Argomenti Introduzione Utilizzo del legno locale Comportamento
DettagliEdilizia 4.0: scenari e opportunità
19 gennaio 2017 Camera di Commercio Reggio Calabria Edilizia 4.0: scenari e opportunità Corrado Trombetta Building Future Lab dell Università Mediterranea di Reggio Calabria Corrado Trombetta Camera di
DettagliCURRICULUM del Prof. Ing. CIRO FAELLA
CURRICULUM del Prof. Ing. CIRO FAELLA Professore Ordinario di Tecnica delle Costruzioni Già Direttore del Dipartimento di Ingegneria Civile Università degli Studi di Salerno Via Ponte Don Melillo 84084/Fisciano
DettagliIng. Mauro Andreolli RICERCA E SPERIMENTAZIONE SU GIUNTI SEMIRIGIDI CON BARRE INCOLLATE PER GRANDI STRUTTURE IN LEGNO LAMELLARE
RICERCA E SPERIMENTAZIONE SU GIUNTI SEMIRIGIDI CON BARRE INCOLLATE PER GRANDI STRUTTURE IN LEGNO LAMELLARE con il patrocinio di: Ing. Mauro Andreolli La progettazione di edifici di grandi dimensioni per
DettagliLA METODOLOGIA DYNAMIC COMPUTATIONAL G.I.S.
LA METODOLOGIA DYNAMIC COMPUTATIONAL G.I.S. Ing. Giuseppe Magro Associato in convenzione di ricerca con il Dipartimento di Ingegneria Energetica Nucleare e del Controllo Ambientale, D.I.E.N.C.A. - Università
DettagliValutazione della vulnerabilità sismica di strutture esistenti in c.a. tramite analisi non-lineari
Valutazione della vulnerabilità sismica di strutture esistenti in c.a. tramite analisi non-lineari Rui PINHO, ROSE School, Risposta sismica di strutture esistenti Non-linearità materiale Non-linearità
DettagliCULTURE & FACILITIES NEW COURT BUILDING NUOVO PALAZZO DI GIUSTIZIA
NEW COURT BUILDING NUOVO PALAZZO DI GIUSTIZIA Date: Completed on 2009 Site: Firenze, Italy Client: INSO Spa Cost: 100 000 000 Structural Design, Architectural Design, Work Supervision, Safety Supervision:
DettagliCURRICULUM VITAE ET STUDIORUM
CURRICULUM VITAE ET STUDIORUM INFORMAZIONI Cognome e nome MONNI FRANCESCO Indirizzo di residenza VIA BAROCCO, 5 60010 OSTRA VETERE (AN) Telefono 3396088721 E-mail monni.f@gmail.com Nazionalità ITALIANA
DettagliSC A1 : Rotating Electrical Machines CIGRE 2012 Session 44 Palais des Congrses Paris, France / August / 2012.
SC A1 : Rotating Electrical Machines CIGRE 2012 Session 44 Palais des Congrses Paris, France 26-31 / August / 2012 Report di sintesi Membro nazionale Italiano: Vincenzo Tartaglione vincenzo.tartaglione@aen.ansaldo.it
DettagliCarriera universitaria
Carriera universitaria CURRICULUM prof. ing. Maria Rosaria Pecce docente ordinario di Tecnica delle Costruzioni all Università del Sannio - Benevento (nata a Napoli - 11 marzo 1963) - laurea in Ingegneria
DettagliINNOVATIVE TECHNIQUES OF SEISMIC RETROFITTING
UNIONE EUROPEA MIUR REGIONE SICILIA PROVINCIA REGIONALE DI SIRACUSA COMUNE DI SIRACUSA - DIPARTIMENTO DELLA PROTEZIONE CIVILE - GRUPPO NAZIONALE DIFESA DAI TERREMOTI (GNDT) UNIVERSITA DI CATANIA - INNOVATIVE
DettagliALESSANDRO GALASCO. Ingegnere Civile Strutturale. Dottore di Ricerca in Ingegneria Civile e Ambientale Indirizzo Ingegneria Strutturale e Geotecnica
ALESSANDRO GALASCO Dottore di Ricerca in Ingegneria Civile e Ambientale Indirizzo Ingegneria Strutturale e Geotecnica Ingegnere Civile Strutturale Via de Giorgi 7, 15121 Alessandria CF: GLS LSN 75E19 D969
DettagliIl primo edificio. G. Della Corte UNIVERSITA di NAPOLI FEDERICO II
AGE Conference MESSINA 100 ANNI DOPO 24-28 28 Novembre 2008 - Messina Consolidamentosismico sismico i di edifici i intelaiati in c.a.: risultati di prove sperimentali in scala reale Gaetano Della Corte
DettagliGRADUATORIA FINALE FINAL RANKING
CORSO DI DOTTORATO DI RICERCA IN INGEGNERIA CIVILE, AMBIENTALE E MECCANICA - 31 CICLO CONCORSO DI AMMISSIONE DOCTORAL PROGRAMME IN PROGRAMME IN CIVIL, ENVIRONMENTAL AND MECHANICAL ENGINEERING 31st CYCLE
DettagliCURRICULUM VITAE Simona Esposito, PhD
CURRICULUM VITAE Simona Esposito, PhD CARRIERA UNIVERSITARIA - Laurea triennale nel 2006 in Ingegneria Gestionale della Logistica e della Produzione (110 /110 e lode) Università degli Studi di Napoli Federico
DettagliATTIVITA SCIENTIFICA E DIDATTICA SVOLTA NEL TRIENNIO
ATTIVITA SCIENTIFICA E DIDATTICA SVOLTA NEL TRIENNIO 17 dicembre 2010-16 dicembre 2013 ALESSANDRA APRILE Ricercatrice (RU), Dipartimento di Ingegneria, Università di Ferrara 1 Attività Scientifica 1.1
DettagliBARRILE VINCENZO. Come si evince dalle pubblicazioni allegate le principali attivita di ricerca hanno riguardato: Pubblicazioni 2013
BARRILE VINCENZO Come si evince dalle pubblicazioni allegate le principali attivita di ricerca hanno riguardato: Laser Scanner Computer Vision Fotogrammetria Telerilevamento GIS Pubblicazioni 2013 BILOTTA
DettagliResistenza a taglio di murature con blocchi in laterizio
Consorzio POROTON Italia Via Gobetti 9-37138 VERONA Tel 045.572697 Fax 045.572430 www.poroton.it - info@poroton.it News - Ricerca 20 luglio 2004 Resistenza a taglio di murature con blocchi in laterizio
DettagliMarzo 2013. Produttività e regimi di protezione all impiego
Marzo 2013 Produttività e regimi di protezione all impiego di Paolo Pini (Università di Ferrara) È vero che maggiori rigidità nel mercato del lavoro si accompagnano a minore produttività? I dati non lo
DettagliPUBBLICAZIONI SCIENTIFICHE DEL DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE 1995-2005
PUBBLICAZIONI SCIENTIFICHE DEL DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE 1995-2005 1 Riviste scientifiche internazionali ISI 118 internazionali non ISI 35 italiane 47 2 Volumi internazionali
DettagliLezione 3 acciaio Prof. Maria Chiara Torricelli Università di Firenze
Temec Acciaio Lezione: L acciaio da costruzione prodotti profili laminati a caldo profili laminati a freddo Lezione 3 acciaio Prof. Maria Chiara Torricelli Università di Firenze 25/11/2015 prof. M.C.Torricelli
DettagliVia Caccia 84, 33100, Udine, Italia +39 0432 45261 +39 320 4366110. gaetano.russo@uniud.it. Sesso M Data di nascita 17/01/1950 Nazionalità Italiana
INFORMAZIONI PERSONALI Gaetano Russo Via Caccia 84, 33100, Udine, Italia +39 0432 45261 +39 320 4366110 gaetano.russo@uniud.it Sesso M Data di nascita 17/01/1950 Nazionalità Italiana POSIZIONE RICOPERTA
DettagliCURRICULUM VITAE. Free University of Bozen-Bolzano, Faculty of Science and Technology. Assistant professor (RTD) in Machine Design (SSD ING-IND/14).
CURRICULUM VITAE Dr. Luca Cortese, Ph.D. Free University of Bozen-Bolzano Faculty of Science and Technology Universitätsplatz 5 piazza Università, 5 - Building K I-39100 Bolzano Phone +39 0471 017646 Fax
DettagliElenco Parziale Prodotti DIST - 2007
Elenco Parziale Prodotti DIST - 2007 G. Di Fonzo, A. Flora, G. Manfredi, M. V. Nicotera, A. Prota (2007). Prove di sfilamento di nails installati in piroclastiti sciolte. pp.1-4 Incontro Annuale Ricercatori
DettagliLa Commissione, quindi, procede ad esaminare la domanda di partecipazione al concorso del candidato con i titoli allegati e le pubblicazioni.
PROCEDURA SELETTIVA DI CHIAMATA AD UN POSTO DI RICERCATORE A TEMPO DETERMINATO TIPOLOGIA B PER IL SETTORE CONCORSUALE 09/A3 SETTORE SCIENTIFICO-DISCIPLINARE ING-IND/14 PROGETTAZIONE MECCANICA E COSTRUZIONE
DettagliRELUIS AT1, Linea di ricerca N.2 Luglio 2011 Meeting
RELUIS AT1, Linea di ricerca N.2 Luglio 2011 Meeting Obbiettivi, organizzazione e sommario delle attività del primo anno Gian Michele Calvi & Tim Sullivan Università degli Studi di Pavia Trento, Luglio
DettagliCURRICULUM VITAE. Fatemeh (Fatima) Jalayer
CURRICULUM VITAE Università degli Studi di Napoli Federico II Via Claudio 21 Napoli 80125, Italy tel: +39 081 7683672 fax: +39 0817683491 e-mail: fatemeh.jalayer@unina.it ISTRUZIONE Dottorato in Ingegneria
DettagliCURRICULUM VITAE DI RAFFAELLO COZZOLINO
CURRICULUM VITAE DI RAFFAELLO COZZOLINO Luogo e data di nascita: Formia, gennaio 8 email: raffaello.cozzolino@unicusano.it Formazione e titoli accademici Anno Istituzione Voto Dottorato di Ricerca in Ingegneria
DettagliUNI EN ISO 12944-6. Corrosion protection of steel structures by protective paint systems. Laboratory performance test for
via di Marmiceto, 6/C-56016 Ospeetto PISA P.IVA 01115340505 CCIAA Pi 101169 Report n 2050451/5 UNI EN ISO 12944-6 Corrosion protection of steel structures by protective paint systems Laboratory performance
Dettagli[2] Back T., 1996, Evolutionary algorithms in theory and practice, Oxford University.
Bibliografia [1] Alampalli S., Fu G., Dillon E. W., 1997, Signal versus noise in damage detection by experimental modal analisis, Journal Structural Engineering ASCE; 123(2): 237-45. [2] Back T., 1996,
DettagliUNIVERSITÀ DEGLI STUDI DI NAPOLI FEDERICO II. Piano di Ricerca per l'anno 2002
UNIVERSITÀ DEGLI STUDI DI NAPOLI FEDERICO II Piano di Ricerca per l'anno 2002 DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE DAPS-2001 Pag. 1/1 PRESENTAZIONE DELLA STRUTTURA Denominazione della struttura:
DettagliCURRICULUM DELL'ATTIVITA' SCIENTIFICA, DIDATTICA, ACCADEMICA E PROFESSIONALE
CURRICULUM DELL'ATTIVITA' SCIENTIFICA, DIDATTICA, ACCADEMICA E PROFESSIONALE di Adolfo Santini Professore ordinario di Scienza delle Costruzioni presso la Facoltà di Ingegneria dell'università degli Studi
DettagliPUBBLICAZIONI SCIENTIFICHE DEL DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE
PUBBLICAZIONI SCIENTIFICHE DEL DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE 1995-2004 Riviste scientifiche: internazionali ISI 108 internazionali non ISI 31 nazionali 44 Volumi internazionali (autore)
DettagliSommario Modellazione delle pareti strutturali Modellazione dei nuclei (vani scala/ascensore)
Sommario Modellazione delle pareti strutturali Elementi shell vs. Wide-Column Models (modelli apilastro equivalente) Modellazione dei nuclei (vani scala/ascensore) Wide-Column Models oppure Stick Models
DettagliTechnical Advisory Italy -
Innovative Earthquake Resistant Design The "InERD" Project Technical Advisory Italy - ArcelorMittal Commercial Long Italia Dott. Ing. Mauro SOMMAVILLA mauro.sommavilla@arcelormittal.com PRF208 INERDSOFT
DettagliADEGUAMENTO SISMICO DI UN EDIFICIO SCOLASTICO IN C.A.: CONFRONTO FRA TECNICHE DI INTERVENTO BASATE SULL IMPIEGO DI DISPOSITIVI METALLICI
XXIV CONGRESSO C.T.A. 273 ADEGUAMENTO SISMICO DI UN EDIFICIO SCOLASTICO IN C.A.: CONFRONTO FRA TECNICHE DI INTERVENTO BASATE SULL IMPIEGO DI DISPOSITIVI METALLICI SEISMIC RETROFITTING OF A RC SCHOOL BUILDING:
DettagliInfluenza dell esecuzione sul comportamento di solai in laterizio
Renato Capozucca, Nicola Del Ciotto, Giorgio Zanarini Tecnologia Influenza dell esecuzione sul comportamento di solai in laterizio Nell articolo si presentano i risultati di un ricerca sperimentale condotta
DettagliUNIVERSITA DEGLI STUDI DI NAPOLI FEDERICO II
UNIVERSITA DEGLI STUDI DI NAPOLI FEDERICO II FACOLTA DI INGEGNERIA DIPARTIMENTO DI INGEGNERIA STRUTTURALE TESI DI LAUREA RELATORI: VALUTAZIONE DELLA VULNERABILITA SISMICA DEI COMPLESSI MURARI CH.MO PROF.
DettagliCorso di Laurea Magistrale in Ingegneria Strutturale e Geotecnica (Classe delle Lauree magistrali in Ingegneria Civile, Classe n.
Corso di Laurea Magistrale in Ingegneria Strutturale e Geotecnica (Classe delle Lauree magistrali in Ingegneria Civile, Classe n. LM-23) La Laurea Magistrale in Ingegneria Strutturale e Geotecnica, ha
DettagliPresidente: Federico Mazzolani - Coordinatore: Antonello De Luca
Presidente: Federico Mazzolani - Coordinatore: Antonello De Luca FINALITA DEL MASTER FINALITA DEL MASTER FORMAZIONE PERMANENTE O TERZO LIVELLO? La situazione in Italia In Italia sono attivi oltre 1000
DettagliE01. edilizia scolastica E 0.01. su misura. scuole elementari e medie, asili, e palestre primary/secondary shool, nursery and scholastic gym
edilizia scolastica E 0.01 scuole elementari e medie, asili, e palestre primary/secondary shool, nursery and scholastic gym Qualità mirata al comfort degli ambienti, alla percezione dei materiali e dei
DettagliCarlo Pellegrino - PUBLICATIONS. A) International peer-reviewed ISI/Scopus journals
Carlo Pellegrino - PUBLICATIONS A) International peer-reviewed ISI/Scopus journals A1. Majorana C.E., Pellegrino C. (1997). Dynamic stability of elastically constrained beams: an exact approach, Engineering
DettagliSilvia Santagati. Occupazione desiderata/settore Professionale. Esperienza professionale. Dipartimento Protezione Civile (Emilia Romagna) FABRYCA
Silvia Santagati Indirizzo: via Cavalieri di Vittorio Veneto, 12 Lodi - Italia Cittadinanza: Italiana Telefono(i): +39 3349543702 / +39 0371610127 Email: silvia.santagati@gmail.com Occupazione desiderata/settore
DettagliCarlo Argiolas Professore associato nel settore scientifico disciplinare ICAR11
Carlo Argiolas Professore associato nel settore scientifico disciplinare ICAR11 Sino al 2014 docente presso il Dipartimento DICAAR della Facoltà di Ingegneria e Architettura dell Università di Cagliari.
DettagliProfessore Ordinario di Analisi Numerica presso il Dipartimento di Matematica e Informatica dell'università di Parma -Laureato in Matematica nel 1972
Professore Ordinario di Analisi Numerica presso il Dipartimento di Matematica e Informatica dell'università di Parma -Laureato in Matematica nel 1972 (Università di Parma) -1972-74 Borsista C.N.R. Istituto
DettagliCurriculum Vitae et Studiorum
Curriculum Vitae et Studiorum Informazioni personali Cognome e Nome Indirizzo Ronchei Camilla Via Villa Glori n 8 43125 Parma Cellulare +39 333 1910312 E-mail camilla.ronchei@studenti.unipr.it; camilla.ronchei@nemo.unipr.it;
DettagliCURRICULUM VITAE INFORMAZIONI PERSONALI. Nome. Marco Cognome. Gambini Indirizzo. Via del Politecnico, 1 Ingegneria Industriale Città
CURRICULUM VITAE INFORMAZIONI PERSONALI Nome Marco Cognome Gambini Indirizzo Via del Politecnico, 1 Ingegneria Industriale Città Roma CAP 00133 Paese ITALIA Telefono (fisso) 06-72597214 Cellulare 339-4908297
DettagliUNIVERSITÀ DEGLI STUDI DI PARMA
UNIVERSITÀ DEGLI STUDI DI PARMA ATTIVITA FORMATIVE INTERAMENTE EROGATE IN LINGUA INGLESE A.A. 2016/2017 Esito dell indagine effettuata presso i Dipartimenti nel mese di giugno 2016 Lauree Dipartimento
DettagliCURRICULUM DELL ATTIVITA SCIENTIFICA E DIDATTICA. Sara Cattaneo
CURRICULUM DELL ATTIVITA SCIENTIFICA E DIDATTICA Sara Cattaneo Dati personali Nata a Bergamo il 15-12-1971. Residenza: Via Garibaldi 4E- 24122 Bergamo Tel. 035-220373 Coniugata, due figlie. Formazione
DettagliProduzione e commercializzazione materiali chimici per l edilizia
F ORMATO EUROPEO PER IL CURRICULUM VITAE INFORMAZIONI PERSONALI Nome CASADEI PAOLO Indirizzo VIA GIUSEPPE MAZZINI N.61, 20826 MISINTO (MB) ITALIA Cellulare Telefono (ufficio) +39 3401637482 +39 0536 816
DettagliINNOVATIVE TECHNIQUES OF SEISMIC RETROFITTING
UNIONE EUROPEA MIUR REGIONE SICILIA PROVINCIA REGIONALE DI SIRACUSA COMUNE DI SIRACUSA - DIPARTIMENTO DELLA PROTEZIONE CIVILE - GRUPPO NAZIONALE DIFESA DAI TERREMOTI (GNDT) UNIVERSITA DI CATANIA - INNOVATIVE
DettagliCURRICULUM VITAE INFORMAZIONI PERSONALI. Rossi Raffaele Data di nascita 13/05/1958. Numero telefonico dell ufficio. Fax dell ufficio
INFORMAZIONI PERSONALI Nome Rossi Raffaele Data di nascita 13/05/1958 Qualifica Amministrazione Incarico attuale Numero telefonico dell ufficio II Fascia L.S. "L.B. ALBERTI" Dirigente - MIUR 070668805
DettagliCURRICULUM VITAE ET STUDIORUM CIRIACO CIRO PASQUALE. Luglio 2009
CURRICULUM VITAE ET STUDIORUM DI CIRIACO CIRO PASQUALE Luglio 2009 INDICE 1. DATI ANAGRAFICI, FORMAZIONE E STATO DI SERVIZIO 2. ATTIVITÀ DI RICERCA 3. ATTIVITÀ DIDATTICHE 4. PUBBLICAZIONI 5. ATTIVITÀ ORGANIZZATIVE
DettagliFrancesca Dezi è Ricercatrice di Geotecnica all Università della Repubblica di San Marino.
CURRICULUM VITAE Francesca Dezi è Ricercatrice di Geotecnica all Università della Repubblica di San Marino. Si è formata all Univeristà Politecnica delle Marche, dove si è laureata in Ingegneria Civile,
DettagliALCUNE RECENTI PUBBLICAZIONI
ALCUNE RECENTI PUBBLICAZIONI SOME RECENT PUBLICATION 1. Rainieri, C., Fabbrocino G, De Magistris, F.S. (2013). An integrated seismic monitoring system for a full- scale embedded retaining wall. GEOTECHNICAL
DettagliCurriculum Vitae. PRESSO: Dipartimento di Ingegneria Chimica, Gestionale, Informatica e Meccanica, Università degli Studi di Palermo
Curriculum Vitae INFORMAZIONI PERSONALI Nome Cognome Recapiti GIANLUCA BUFFA ed.8, Facoltà di Ingegneria, DICGIM, " piano Telefono 091-23861869 E-mail gianluca.buffa@unipa.it FORMAZIONE TITOLI Formazione
DettagliF O R M A T O E U R O P E O
F O R M A T O E U R O P E O P E R I L C U R R I C U L U M V I T A E INFORMAZIONI PERSONALI Nome Indirizzo Telefono Fax E-mail Nazionalità Plizzari, Giovanni Via Montanaro 7/B - 26013 Crema (Cr) - Italy
DettagliCURRICULUM SINTETICO. - Professore Associato in Tecnica delle Costruzioni dal 1998 al 2000.
Prof. Gaetano Manfredi Ordinario di Tecnica delle Costruzioni Dipartimento di Strutture per l Ingegneria e l Architettura Università di Napoli Federico II Facoltà di Ingegneria Nato ad Ottaviano il 4 gennaio
DettagliAttività di ricerca in campo sismologico promosse dalla Provincia di Trieste
Attività di ricerca in campo sismologico promosse dalla Provincia di Trieste Trieste - Classificazione sismica 1984 - Classificazione sismica 1998 - Proposta di riclassificazione sismica 2003 - Mappa zone
DettagliVia di Santa Marta, 3, 50139, Firenze, Italia +39 055 2758805 +39 338 3613600. Sesso Maschio Data di nascita 21/02/1977 Nazionalità Italiana
INFORMAZIONI PERSONALI Emanuele Del Monte Via di Santa Marta, 3, 50139, Firenze, Italia +39 055 2758805 +39 338 3613600 e.delmonte@s2r-sismosafe.it emadelmo@dicea.unifi.it www.s2r-sismosafe.it Skype emadelmo
DettagliELENCO DELLE PRINCIPALI PUBBLICAZIONI SCIENTIFICHE
UNIVERSITÀ DEGLI STUDI DELL'AQUILA Prof. Amedeo Gregori Curriculum scientifico (Aggiornato il 4/08/2016) Argomenti di studio e ricerca I campi di ricerca e gli interessi scientifici del Ricercatore Amedeo
DettagliCasa:0823311386 Ufficio:0823311386. rosa.delucia@unina.it Italiana 31/03/79 - Maddaloni - Caserta Cod.Fiscale:DLCRSO79C71E791E
C U R R I C U L U M V I T A E I N G. R O S A D E L U C I A INFORMAZIONI PERSONALI Nome Indirizzo Rosa de Lucia Residenza:Via Carmignano 138,81024 Maddaloni CE; Domicilio: Via Carmignano 138,81024 Maddaloni
DettagliQualifica conseguita Attestato di partecipazione al seminario. Proposta formativa CFP:4 Livello nella classificazione nazionale (se pertinente)
F ORMATO EUROPEO PER IL CURRICULUM VITAE INFORMAZIONI PERSONALI Nome [REGGIANI LUCA ] Indirizzo [2, VIA MARIE CURIE, 41126, MODENA, ITALIA ] Telefono 059/335208 (ufficio) Fax 059/333221 (ufficio) E-mail
DettagliTabella 1a - Corsi di Studio con sede didattica in Bologna
Tabella 1a - Corsi di Studio con sede didattica in Bologna Cod. Materia Desc. Materia Desc. Integrato Sdopp. Mod. Ssd Cfu tot. Ciclo Ore componente Cds Desc. Cds Sede didattica 29894 FLUIDODINAMICA E APPLICAZIONI
DettagliCURRICULUM VITAE Bruno G. Lamonaca
INFORMAZIONI PERSONALI Nome Data di nascita 15-12-1964 Qualifica Amministrazione Incarico attuale BRUNO GERARDO LAMONACA Dirigente di II fascia Telefono dell'ufficio 075-5838.333 Fax dell'ufficio 075-5837561
DettagliORDINE DEGLI INGEGNERI DELLA PROVINCIA DI BERGAMO
ORDINE DEGLI INGEGNERI DELLA PROVINCIA DI BERGAMO Corso di aggiornamento professionale Dott. Ing. Giulio Pandini IX Corso Università degli Studi di Bergamo - Facoltà di Ingegneria Dalmine 22 novembre 2003
DettagliLa revisione delle NTC08 proposte per una progettazione sismica sostenibile
La revisione delle NTC08 proposte per una progettazione sismica sostenibile Giuseppe Scarpelli 23 Maggio 2013 GES Geotechnical Engineering Services S.r.l. Academic spin off UNIVERSITA POLITECNICA DELLE
DettagliCURRICULUM VITAE. Raffaele Casciaro
CURRICULUM VITAE Raffaele Casciaro Data di nascita 1943 Luogo di nascita Rossano (CS) Tel: 0984 496905 Fax: 0984 496912 E-Mail: rcasciaro@labmec.unical.it Home page: http://www.labmec.unical.it/about/people/personale.php?id_utente=2
DettagliArrivi Firenze vs città. Arrivi Firenze vs paesi
Arrivi Firenze - 2012 vs 2013 - città da mondo (città) da mondo (città) a firenze a firenze n città di provenienza: % n città di provenienza: % % 2012 vs 2013 1 London 21,3% 1 London 19,8% -7,0% 2 Moscow
DettagliFISSAGGI FIXING. per FOTOVOLTAICO PHOTOVOLTAIC. systems
FISSAGGI per FOTOVOLTAICO PHOTOVOLTAIC FIXING systems 40 Dal Since GL Locatelli produce ancoraggi per gli impianti fotovoltaici. GL Locatelli designs anchor structures for photovoltaic systems. Ufficio
DettagliDati Anagrafici Alberto Pavese Nato 21 giugno 1962 a Tortona (Al) Residente in Strada Costa Longarino 5, Tortona (Al) Formazione e posizioni
Dati Anagrafici Alberto Pavese Nato 21 giugno 1962 a Tortona (Al) Residente in Strada Costa Longarino 5, Tortona (Al) Formazione e posizioni 1987 laurea cum laude in Ingegneria Civile, indirizzo strutturistico
DettagliCURRICULUM VITAE. Studi e formazione. Luglio 1991 Diploma di Perito tecnico industriale con indirizzo informatico con la votazione di 56/60
CURRICULUM VITAE Dati personali Maria Pia Boni Nata a Vigevano (PV), il 15/12/1972 Residente a Vigevano (PV) Tel. Uff. 0223994261 E-mail: boni@stru.polimi.it Studi e formazione Luglio 1991 Diploma di Perito
DettagliLa Validazione di codici di calcolo
Ing. Luigi Griggio - CSPFea La Validazione di codici di calcolo per migliorare la progettazione e garantire la sicurezza La Validazione dei Modelli Numerici Perché passare a modelli numerici più sofisticati?
DettagliELENCO PROVE ACCREDITATE - CATEGORIA: 0
Scheda 1 di 5 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Apparecchi per il riscaldamento domestico alimentati con pellet in legno Prova a potenza termica ridotta. Reduced heat output test. Biocombustibili
DettagliStrada Perugia San Marco Perugia.
F ORMATO EUROPEO PER IL CURRICULUM VITAE INFORMAZIONI PERSONALI Nome ALESSANDRO FULCO Indirizzo Strada Perugia San Marco 43 06123 Perugia Telefono 338 9890299 P.IVA 01883970764 E-mail Ingegnere Civile
DettagliPeretto Antonio Codice Domanda: Candidatura per l inserimento nell Elenco degli esperti di cui all art. 11 d.m. 8 marzo 2006
Peretto Antonio Codice Domanda: 00088 Candidatura per l inserimento nell Elenco degli esperti di cui all art. 11 d.m. 8 marzo 2006 Dati Anagrafici Nome: Antonio Cognome: Peretto Data di Nascita: 23-02-1965
DettagliGambini Marco Codice Domanda: 00172 Candidatura per l inserimento nell Elenco degli esperti di cui all art. 11 d.m. 8 marzo 2006
Gambini Marco Codice Domanda: 00172 Candidatura per l inserimento nell Elenco degli esperti di cui all art. 11 d.m. 8 marzo 2006 Dati Anagrafici Nome: Marco Cognome: Gambini Data di Nascita: 10-10-1959
DettagliENTE PER LE NUOVE TECNOLOGIE L ENERGIA E L AMBIENTE. art. 169, ERANET +
ENTE PER LE NUOVE TECNOLOGIE L ENERGIA E L AMBIENTE Nuovi strumenti di finanziamento, art. 169, ERANET + Luigi Lombardi - Ricercatore ENEA Coordinatore Nazionali Progetti EUREKA - EUROSTARS Esperto 7 PQ
DettagliTECNICA DELLE COSTRUZIONI (72 ore, Marzo 2015 Maggio 2015)
UNIVERSITA DEGLI STUDI ROMA TRE ANNO ACCADEMICO 2014-15 TECNICA DELLE COSTRUZIONI (72 ore, Marzo 2015 Maggio 2015) FACOLTA DI INGEGNERIA CORSO DI STUDI IN INGEGNERIA CIVILE OBIETTIVI DEL CORSO fornire
DettagliPORTFOLIO PROGETTI RICERCA INNOVAZIONE. Spin Off dell'università Politecnica delle Marche
ARCHITECTURAL HERITAGE RESTORATION THROUGH TAILORED ENGINEERING s.r.l. Spin Off dell'università Politecnica delle Marche PROGETTI RICERCA INNOVAZIONE RESPONSABILI SCIENTIFICI Enrico QUAGLIARINI Stefano
DettagliSubTask 3b.3. Misura in situ dello stato di sforzo mediante l uso di martinetto piatto singolo
Rete dei Laboratori Universitari di Ingegneria Sismica Progetto esecutivo 2005-2007 Progetto di ricerca 1 Valutazione e riduzione della vulnerabilità di edifici in muratura Coordinatore: G. Magenes, S.
DettagliSC C1: System Development and Economics CIGRE 2012 Session 44 Palais des Congres Paris, France 26-31 / August / 2012.
SC C1: System Development and CIGRE 2012 Session 44 Palais des Congres Paris, France 26-31 / August / 2012 Report di sintesi Membro nazionale italiano: E.M. Carlini/B. Cova (Cesi) enricomaria.carlini@terna.it
DettagliCURRICULUM VITAE del prof. ing. Andrea Prota nato a Napoli il 05.11.1973
CURRICULUM VITAE del prof. ing. Andrea Prota nato a Napoli il 05.11.1973 - Si è laureato in Ingegneria Edile presso la Facoltà di Ingegneria dell'università di Napoli il 30 Marzo 1998 con voti 110 e lode
Dettagli