Prof. Dr. Ing. RAFFAELE LANDOLFO ELENCO DELLE PUBBLICAZIONI

Prof. Dr. Ing. RAFFAELE LANDOLFO e-mail: landolfo@unina.it ELENCO DELLE PUBBLICAZIONI

SIMBOLI E CONVENZIONI Le pubblicazioni riportate nel presente elenco sono suddivise in raggruppamenti omogenei secondo il seguente schema: A. Pubblicazioni su riviste internazionali B. Pubblicazioni su riviste nazionali C. Atti di Congressi e Workshop internazionali D. Atti di Congressi e Workshop nazionali E. Capitoli di libri internazionali e nazionali F. Libri G. Rapporti di ricerca e documenti normativi H. Varie Nell ambito di ogni raggruppamento, sono indicati per ogni pubblicazione: numero progressivo di identificazione, in ordine cronologico; autore/i; titolo (in corsivo) e riferimento (rivista, congresso, luogo, anno, etc); L asterisco (*) contraddistingue: - pubblicazioni su riviste nazionali di articoli già pubblicati su riviste internazionali o nazionali - atti di congressi pubblicati successivamente su riviste Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 2/38

A. PUBBLICAZIONI SU RIVISTE INTERNAZIONALI A.01 A.02 De Martino A. A.03 A.04 Ghersi A. A.05 A.06 A.07 A.08 A.09 Moen L.A. Hopperstad O.S. Langseth M. A.10 A.11 Milev J. A.12 A.13 Calado L. Sur le comportement au flambement des profils tubulaires formés à froid (Construction Métallique, n. 4, France, 1990, pp. 23-29). The use of the Ramberg-Osgood law for materials of round-house type (Materials and Structures, n. 23, France, 1990, pp. 59-67). The influence of the variation through the thickness of residual-stresses in tubular columns (Journal of Constructional Steel Research, Vol. 19, n. 1, Elsevier Science Limited, Great Britain, 1991, pp. 49-57). Buckling modes of double-channel cold-formed beams (Thin-Walled Structures 19, Elsevier Science Limited, Great Britain, 1994, pp. 353-366). On the shear flexibility of corrugated steel panels (Steel Structures, Journal of Singapore Structural Steel Society, Vol. 6, 1995, pp.103-111). Different approaches in the design of slender aluminium alloy sections (Thin-Walled Structures, Elsevier Science Limited, Great Britain, Vol.17, No. 1, 1997, pp.85-102). Structural behaviour of sandwich panel shear walls: An experimental analysis (Materials and Structures, Vol. 32., 1999, pp. 331-341). Mechanical fasteners for cladding sandwich panels: interpretative models for shear behaviour (Thin-Walled Structures, Elsevier Science Limited, Vol. 35, No. 1, 1999, pp.61-79). Rotational capacity of aluminum beams under moment gradient. II: Numerical simulations (Journal of Structural Engineering, ASCE, Vol. 125 No.8, August 1999, pp.921-929). Modelling of lightweight sandwich shear diaphragms for dynamic analyses (Journal of Constructional Steel Research, Vol. 53, Elsevier Science Limited, Great Britain, 2000, pp. 33-61). Q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches" (Acta Polytechnica, Journal of Czech Technical University, Vol.39, No. 5, 1999, pp.183-194). Diaphragm action of sandwich panels in pin-jointed steel structures: a seismic study (Journal of Earthquake Engineering, Vol.4, No.3, 2000, pp.251-275). Experimental response of top and seat angle semi-rigid steel frame connections (Material and Structures, Vol.33, 2000, pp.499-510). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 3/38

A.14 Moen L.A. Langseth M. Hopperstad O.S. A.15 A.16 A.17 A.18 A.19 Manganiello M. A.20 Faggiano B. A.21 Manganiello M. A.22 A.23 A.24 Guerrieri M.R. A.25 Cross-sectional classification for aluminum beams - Parametric study (Journal of Structural Engineering, ASCE, Vol. 127(3), 2001, pp.271-279). Seismic analysis of MR steel frames based on refined hysteretic models of connections (Journal of Constructional Steel Research, Vol. 58, Elsevier Science Limited, Great Britain, 2002, pp. 1331-1345). Seismic response of MR steel frames with low-yield steel shear panels (Engineering Structures, Vol. 25, Elsevier Science Limited, Great Britain, 2003, pp.155-168). Post-earthquake fire resistance of moment resisting steel frames (Fire Safety Journal, Vol.38., Elsevier Science Limited, Great Britain, 2003, pp. 593-612). Shear experimental response of new connecting systems for cold-formed structures (Journal of Constructional Steel Research, Vol. 60, Elsevier Science Limited, Great Britain, 2004, pp. 561-579). Inelastic behaviour of I-shaped aluminium beams: numerical analysis and cross-sectional classification (Computers and Structures, Vol. 82, Elsevier Science Limited, Great Britain, 2004, pp. 2157-2171). Behaviour of aluminium alloy structures under fire (Journal of Civil Engineering and management, Vol. X, No. 3, Vilnius, Lituania, 2004, pp. 183-190). Inelastic flexural strength of aluminium alloys structures (Engineering Structures, Vol. 28, Elsevier Science Limited, Great Britain, 2006, pp. 593-608). Seismic behavior of sheathed cold-formed structures: Numerical study (Journal of Structural Engineering, ASCE, Vol. 132, No.4, 2006, pp.558-569). Seismic behavior of sheathed cold-formed structures: Physical tests. (Journal of Structural Engineering, ASCE, Vol. 132, No.4, 2006, pp.570-581). The Umberto I Gallery in Naples: the influence of corrosion damage on the seismic performance of the iron roofing structure (Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 347, 2007, pp.345-350). Experimental tests on typical screw connections for cold-formed steel housing (Engineering Structures, Vol. 29(8), Elsevier Science Limited, Great Britain, 2007, pp. 1761-1773). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 4/38

A.26 Guerrieri M.R. A.27 Cascini L. A.28 Faggiano B. Esposto M. Perotti F. Barbella G. A.29 Guerrieri M.R. A.30 Iuorio O. A.31 Iuorio O. A.32 Krstevska L. Tashkov L. Gramatikov K. Mazzolani F. A.33 Cascini L. A.34 A.35 D Aniello M. Laser welded built-up cold-formed steel beams: experimental investigations (Thin- Walled Structures, Elsevier Science Limited, Vol. 46, Issue: 7-9, 2008, pp. 781-791). An integrated approach to durability design of steel structures against atmospheric corrosion (Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 385-387, 2008, pp.657-660). Structural analyses of the Submerged Floating Tunnel prototype in Qiandao Lake (PR of China). (Advances in Structural Engineering, ISSN 1369-4332, Vol. 11, No. 4., 2008, pp. 439-454). Experimental investigation on laser welded connections for built-up cold-formed steel beams (Journal of Constructional Steel Research, Elsevier Science Limited, Vol. 65, Issue: 7-9, 2009, pp. 196-208). Sheathed cold-formed steel housing: A seismic design procedure (Thin-Walled Structures, Elsevier Science Limited, Vol. 47, 2009, pp. 919-930). A specific procedure for seismic design of cold-formed steel housing (Advanced Steel Construction, Elsevier Science Limited, Vol. 6, 2010, pp. 603-618) Large-scale experimental investigation on Mustafa Pasha Mosque (Journal of Earthquake Engineering, ISSN 1363-2469, Taylor & Francis, Vol. 14, 2010, pp. 842-873) Modeling of metal structure corrosion damage: A state of the art report (Sustainability, ISSN 2071-1050, Vol. 2, 2010, pp. 2163-2175) Displacement-based seismic design of braced steel structures (Steel Construction Design and Research, ISSN 1867-0520, Vol. 3, September 2010, pp. 134-139) Experimental investigation on shear behaviour of riveted connections in steel structures (Engineering Structures, Elsevier Science Limited, ISSN 0141-0296, Vol. 33, February 2011, pp. 516 531) Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 5/38

A.36,,,, Krstevska L., Tashkov L., Gramatikov K.. A.37, D'Aniello M.,, A.38, Cascini L., A.39, Iuorio O., Seismic Retrofitting of Mustafa Pasha Mosque in Skopje: Finite Element Analysis (Journal of Earthquake Engineering, Taylor and Francis group, ISSN: 1363-2469, Vol 15, May 2011, pp.620 639) Review of steel buckling-restrained braces (Steel Construction Design and Research, ISSN 0049-2205, Vol. 4, June 2011, pp. 85-92) Sustainability of steel structures: towards an integrated approach to life-time engineering design (Frontiers of Architecture and Civil Engineering in China, ISSN 1673-7407, Volume 5, Number 3, September 2011, pp. 304-314) Seismic analysis of sheathing-braced cold-formed steel structures (Engineering Structures, Elsevier Science Limited, ISSN 0141-0296, Volume 34, January 2012, pp. 538-547) A.40 Construction Parasismique, Plus fort que Poséidon! (Chantiers & Renovation, Publi Annonces SA, N 3, March 2012, pp. 12-14) A.41 D'Aniello M.,, Piluso V., Rizzano G. Ultimate behavior of steel beams under non-uniform bending (Journal of Constructional Steel Research, Elsevier Ltd., n. 78 (2012), p.p. 144-158 A.42 Construction parasimique en acier (Construire en acier Construction parasismique, Conception et dimensionnement, Centre suisse de la construction métallique, Stahlbau Zentrum Schweiz, Centro svizzero per la costruzione in acciaio., n. 03+04/11 steeldoc, p.p. 8 18. A.43 Erdbebensicher Bauen in Stahl (Construire en acier Erdbebensicher Bauen, Konzeption und Tragwerksplanung, Stahlbau Zentrum Schweiz, Centre suisse de la construction métallique, Centro svizzero per la costruzione in acciaio, n. 03+04/11 steel doc, p.p. 8 18. A.44 Steel & Earthquake: Research and Standards (Steel Construction Design and Research, ISSN 1867-0520, Vol. 4, June 2011, pp. 51-52) B. PUBBLICAZIONI SU RIVISTE NAZIONALI B.01 B.02 Mazzolani F. M Il comportamento strutturale delle leamiere grecate di terza generazione (Acciaio, n. 2, Febbraio, 1988, pp. 57-68). Indagine sperimentale su lamiere grecate tipo TRP 200 (Acciaio, n. 1, Gennaio, 1989, pp. 1-11). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 6/38

B.03* De Martino A. B.04 B.05* Mazzolani F. M B.06 B.07 Ghersi A. B.08 Mazzolani F. M B.09 Ghersi A. B.10 Calderoni B. De Martino A. B.11 B.12 La Veglia M. B.13 B.14 Foraboschi P. Differenti modellazioni della legge di Ramberg-Osgood per le leghe di alluminio (Alluminio Magazine n. 5/6, 1989, pp. 21-28). Sistemi misti acciaio-calcestruzzo con l impiego di lamiere grecate di terza generazione: indagine sperimentale (Acciaio, n. 1, Gennaio, 1990, pp. 1-10). Sistemi misti acciaio-calcestruzzo con l impiego di lamiere grecate di terza generazione: indagine sperimentale (1 a parte in Lamiera, n. 11, 1991, pp. 92-96, 2 a parte in Lamiera, n. 2, 1992, pp. 104-111). Modelli teorici e numerici per la valutazione del comportamento flessionale della sezione mista calcestruzzo-trp 200 (L Edilizia n. 9, Settembre, 1991, pp. 549-557). Aspetti innovativi dell EC3 nella verifica delle sezioni in parete sottile (Costruzioni Metalliche, n. 5, 1992, pp. 288-302). Comportamento flessionale di lamiere grecate in acciaio: analisi sperimentale (Costruzioni Metalliche, n. 1, 1995, pp. 29-41). Thin-walled sections in round-house type material: a simulation model (Costruzioni Metalliche n.6, 1996, pp.17-27). Il comportamento sismico di telai in profili sottili:limiti di servizio e definizione del fattore di struttura (Costruzioni Metalliche, n.2, 1999, pp.49-55). L'effetto collaborante dei pannelli di chiusura negli edifici a struttura di acciaio soggetti ad azioni sismiche (Costruzioni Metalliche, n.4, 1999, pp.63-74). Grattacielo in fiamme a Napoli: quando il rischio viene gestito male (Antincendio, n.10, 2000, pp.79-88). Attualità e prospettive dei sistemi costruttivi cold-formed (Costruzioni Metalliche, n.1, 2002, pp.33-50). Comportamento strutturale di volte a padiglione con e senza rinforzi in FRP (Costruire in laterizio, n.95, settembre/ottobre 2003, pp.68-73). B.15 L'evoluzione della normativa sismica (Costruzioni Metalliche, n.1, 2005, pp.54-66). B.16 Ghersi A. B.17 B.18 Il contributo strutturale dei pannelli di completamento sulla risposta sismica dei telai di acciaio (Ingegneria Sismica, n.1, 2005, pp.14-25). Comportamento sismico di edifici residenziali in acciaio con pareti a taglio con pareti a taglio in profili formati a freddo e pannelli di rivestimento (Costruzioni Metalliche, n.6, 2005, pp.47-62). Ancoraggi a trazione e a taglio per edifici residenziali in acciaio con pareti a taglio in profili formati a freddo e pannelli di rivestimento (Progetti&Tecnologie, n.7, Maggio 2006, pp.16-19). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 7/38

B.19 Faggiano B. Esposto M. A Submerged Floating Tunnel (Archimedes Bridge) prototype in the Qiandao Lake (PR of China): research development and basic design (Costruzioni Metalliche, n.6, 2007, pp.45-63). B.20 Molto bravo a neutralizzare il sisma (Il Giornale dell Architettura, n.58, 2008, Rapporto Metalli, p.8). B.21 Acciaio e Ricerca (Costruzioni Metalliche, n.1, 2008, pp.57-73). B.22 Iuorio O. Leggere e sismo-resistenti (Modulo, n. 356, 2009, pp.1063-1066) B.23 Acciaio e Sisma (Costruzioni Mettaliche, n. 6, 2009, pp. 53-69) B.24 Competitivo e affidabile (Arketipo, Anno 5, n. 45, 2010, pp. 108-109) B.25 Cascini L. D Aniello M. B.26 Ferracuti B. Gli effetti del degrado da fatica e corrosione sui ponti ferroviari in carpenteria metallica: un approccio integrato per la valutazione della vita residua (Costruzioni Mettaliche, n. 6, 2010, pp. 37-46) Le strutture metalliche: sostenibilità ed efficienza (Il Giornale dell Ingegnere, n. 16, Ottobre, 2010, pp. 7) B.27 Progettare con l acciaio in zona sismica in accordo alle NTC (Il Giornale dell Ingegnere, n. 16, Ottobre, 2010, pp. 10-11) B.28 Cascini L., D Aniello M., B.29,, Iuorio O. Gli effetti del degrado da fatica e corrosione sui ponti ferroviari in carpenteria metallica: un approccio integrato per la valutazione della vulnerabilità (Rivista italiana della saldatura, n. 3, Maggio-Giugno, 2011, pp. 367-377) Progetto, realizzazione e collaudo della nuova scuola Bfs in Lago Patria, Napoli (Costruzioni Mettaliche, n. 6, Novembre-Dicembre, 2011, pp. 51-63) C. ATTI DI CONGRESSI E WORKSHOP INTERNAZIONALI C.01 C.02* C.03 C.04 De Martino A. Ghersi A. The consequence of the design criteria on the seismic behaviour of steel frames (9th European Conference on Earthquake Engineering, Moskow, September, 1990, Vol. 2, pp. 11-19). The influence of the variation through the thickness of residual stresses in tubular columns (International Colloquium on Stability of Steel Structures, Budapest, April, 1990, Vol. 3, pp. 109-114). Behaviour of 3rd generation trapezoidal steel sheetings (Testing of Metals for Structures, RILEM Proceedings 12, E & FN Spon, London, 1990, pp. 444-452). Bending behaviour of long-span steel sheeting: test and simulation (International Conference on Steel and Aluminium Structures, Singapore, May, 1991, Elsevier Applied Science, London, 1991, pp. 429-438). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 8/38

C.05 Calderoni B. Lenza P. C.06 De Martino A. Ghersi A. C.07 De Martino A. C.08* Ghersi A. C.09 Ventrella E. C.10 C.11 Calderoni B. De Martino A. Ghersi A. C.12 C.13 C.14* C.15 C.16 C.17 Comparative analysis of seismic elastoplastic behaviour of reinforced concrete and steel frames (10th World Conference on Earthquake Engineering, Madrid, July, 1992, A. A. Balkema, Rotterdam, 1992, Vol. 7, pp. 4025-4030). Calibration of a bending model for cold-formed sections (11 th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, October, 1992, pp. 503-511). Cold-formed steel sections: the state of the art in Italy (First World Conference on Constructional Steel Design, Acapulco, November, 1992, Elsevier Applied Science, London, 1992, pp. 178-181). Buckling modes of double-channel cold-formed beams (First International Conference on Coupled Instabilities in Metal Structures, Timisoara, October, 1992). Qualification analysis of a new structural system (IV International Conference on Space Structures, University of Surrey, September, 1993, Thomas Telford Service, London, 1993, Vol. 1, pp. 693-702). Shear behaviour of steel corrugated panels (I International Whorkshop and Seminar on Behaviour of Steel Structures in Seismic Areas, Timisoara, June, 1994, E & FN Spon, London, 1995, pp. 421-430). On the seismic resistance of light gauge steel frames (I International Whorkshop and Seminar on Behaviour of Steel Structures in Seismic Areas, Timisoara, June, 1994, E & FN Spon, London, 1995, pp. 333-343). Ultimate behaviour of trapezoidal steel sheets in bending (12th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, October, 1994, pp. 205-215). Shear tests on sandwich panel connections (Second state of the art whorkshop COST C1, Prague, October, 1994, European Commission, Brussels, pp. 481-491). Different approaches in the design of slender alluminium alloy sections (International Conference on Steel and Aluminium Structures, Istanbul, May, 1995, pp. 137-146). The influence of connecting system on the shear flexibility of corrugated steel panels (IX International Conference on Metal Structures, Krakow, June, 1995, pp. 97-106). The characterisation of equivalent orthotropic plate for corrugated shear panels (International Colloquium on Stability of Steel Structures, European Session, Budapest, September, 1995, Vol. 2, pp. 153-160). Finite element analysis of shear steel panels (4th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.45-56). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 9/38

C.18 Del Ponte R. C.19 Del Ponte R. C.20 C.21 Dubina D. Goina D. Ungureanu V. C.22 C.23 C.24 C.25 C.26 C.27 C.28 Calderoni B. De Martino A. Ghersi A. C.29 Experimental analysis on sandwich panel-to steel frame connecting systems (4th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.65-74). Monotonic and cyclic tests on sandwich panels in shear (4th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.75-88). Wrinkling analysis of lightweight sandwich panels (4 th Cost - C1 Seismic Working Group Meeting, Anacapri, ottobre 1995, Published on Earthquake Performance of Civil Engineering Structures ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.57-64). Coupled instability of thin-walled cold-formed beams (II International Conference on Coupled Instabilities in Metal Structures, Liege, September, 1996, pp.263-272). The stiffening effect of cladding panels on steel building: the ECSC research project in progress (International Workshop on Thin-Walled Structures, Kreisau, September, 1996, pp. 25-34). Analytical models for cladding panels under monotonic and cyclic loads (5th International Colloquium on Structural Stability S.S.R.C., Brazilian Session, Rio de Janeiro, August, 1996, pp.163-174). Monotonic behaviour of fastening systems for sandwich panels (IABSE International Conference on Composite Construction Conventional and Innovative, Innsbruck, Austria, September 16-18, 1997, pp.848-849). Influence of welding on stability of aluminium thin plates (5th International Colloquium on Stabilty and ductility of steel Structures SDSS 97, Nagoya, JAPAN, July 29-31, 1997, pp.149-156). Hysteretic behaviour of fastening in sheeting (Proceedings of STESSA 97 - Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.622-631). Dynamic behaviour of sandwich diaphragms in simple pin-jointed steel frames, (Proceedings of STESSA 97 Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.434-443). Influence of local buckling on the global seismic performance of light gauge portal frames (Proceedings of STESSA 97 - Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.29-40). Experimental shear response of a single sandwich panel (Proceedings of Experimental Model Research and Testing of Thin-Walled Structures, Prague, Czech Republic, 22-24 September, 1997, pp.199-208). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 10/38

C.30 C.31 C.32 C.33 Moen L.A. Hopperstad O.S. Langseth M. C.34 Piluso V. Hopperstad O.S Langseth M. C.35* Milev J. C.36 C.37 Calado L. C.38 Fulop L. Dubina D. C.39 Piluso V. C.40 C.41 Calado L. Diaphragm effect for industrial steel buildings under earthquake loading (Proceedings of II World Conference on Constructional Steel Design, San Sebastian, May 1998 in Journal of Constructional Steel Research, Elsevier, 1998, 46:1-3, Paper No. 401). Dynamic response of infilled multistorey steel frames (Proceedings of XI European Conference on Earthquake Engineering, Paris, 6-11 September, 1998). Cyclic models for shear diaphragms with different connecting systems (Proceedings of COST C1 International Conference, Liège, 17-19 September 1998, pp.415-424). A parametric study on the rotational capacity of aluminium beams using non-linear FEM (Proc. of International Conference on Steel and Aluminium Structures, Espoo (Finland) June 20th 23th, 1999, pp. 637-646). EC9 provisions for flat internal elements: comparison with experimental results (Proc. of International Conference on Steel and Aluminium Structures, Espoo (Finland) June 20th 23th, 1999, pp.515-522). q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches (Proc. of 2nd European Conference on Steel Structures (Eurosteel 99), Prague, May, 26th 29th, Paper 221, 1999). Cladding Panel Action in Drift Control of Seismic Resistant Steel Frames (Proc. of 2nd European Conference on Steel Structures (Eurosteel 99), Prague, May, 26 th 29th, Paper 163, 1999). Cyclic behaviour of steel beam-to-column connections: interpretation of experimental results (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS 99), Timisoara (Romania), September, 9th 11th, 1999, pp.211-220). Seismic response of MR steel frames with different connection behaviours (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS 99), Timisoara (Romania), September, 9th 11th, 1999, pp.409-420) Local buckling of aluminium channels: tests and simulation (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS 99), Timisoara (Romania), September, 9th 11th, 1999, pp.525-532). Influence of different hysteretic behaviours on seismic response of SDoF systems (Proc. of 12 th World Conference on Earthquake Engineering, 12WCEE, Auckland, New Zealand, 30 January- 4 February 2000). Fracture resistance design of bolted joints (Proc. of 2nd Conference Construcao Metàlica e Mista, Coimbra, (Portugal, November, 18th 19th, 1999, pp.577-588). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 11/38

C.42 Dubina D. Stratan A. Seismic Performance of Dual Steel Moment-Resisting Frames. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.569-577.). C.43 Calado L. C.44 C.45 Faggiano B. C.46 Cyclic Behaviour of Semi-Rigid Angle Connections: a Comparative Study of Tests and Modelling. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.165-174). The effect of connection hysteretic behaviour on seismic damage to moment resisting steel frames. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.601-610). Comparative Study on Seismic Design Procedures for Steel MR Frames according to the Force-Based Approach (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.577-584). Inelastic Behaviour of Hollow Rectangular Shaped Aluminium Beams (Proc. of the 5th International Conference on Computational Structures Technology, CST 2000, Leuven (Belgium), 6-8 September, 2000, pp.373-379). C.47 Coupled Instabilities in Non Linear Materials (Proc. of III International Conference on Coupled Instabilities in Metal Structures, General Report, Lisbon, September, 2000, pp.263-272). C.48 C.49 C.50 Faggiano B. C.51 De Rosa V. C.52 C.53 Seismic analysis of MR steel frames based on refined hysteretic models of connections (Proc. of the International Conference on Structural Engineering SEMC 2001, Cape Town, April, 2001, pp.955-964). Contributing effects of cladding panels in the seismic design of MR steel frames (Proc. of the International Conference on Structural Engineering SEMC 2001, Cape Town, April, 2001, pp. 937-946 ). A survey on ductile design of mr steel frames (Proc. of the International Conference on Structural Engineering SEMC 2001, Cape Town, April, 2001, pp.965-974 ). Rotational capacity of I-shaped aluminium beams: a numerical study (Proc. of III Int. Conf. On Thin-Walled Structures, Cracow, Poland, 5-7 June 2001, pp.747-756) Post-earthquake fire resistance of steel structures (Proc. of the European Conference on Safety and Reliability, ESREL 2001, Torino, September, 2001, pp. 1739-1746 ). Experimental analysis of aluminium T-Stubs: framing of the research activity (Proc. of INALCO, Monaco, March 2001, pp.6-3-1 6-3-14). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 12/38

C.54 Faggiano B. C.55 C.56 Faggiano B. C.57 C.58 C.59 C.60 Faggiano B. Design and modelling aspects concerning the submerged floating tunnels: an application to the Messina Strait crossing (Proc. of IV Symposium on Strait Crossings, Bergen, Norway, September 2001, pp.511-519) Global stability of MR steel frames under seismic actions (Proc. of 12th European Conference on Earthquake Engineering, London, September, 2002, Elsevier Science Ltd,. CD-ROM: paper n.307 ). Seismic analysis and design of steel MR frames with dog-bone connections Proc. of 12th European Conference on Earthquake Engineering, London, September, 2002, Elsevier Science Ltd,. CD-ROM: paper n.309). Study of innovative built-up cold-formed beams (Proc. of 16th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2002, pp.161-172). Practical application of dissipative shear walls in seismic design of steel frames: a comparative study (Proc. of International Colloquium on Stability and Ductility of Steel Structures, SDSS 2002, Budapest, September, 2002, pp.657-667). Comparative study of new connecting systems for cold-formed structures (Proc. of International Conference on Steel Structures, Eurosteel 2002, Coimbra, September, 2002, pp.657-668). On the efficacy of design methods for steel moment resisting frames according to Eurocode (Proc. of International Conference on Steel Structures, Eurosteel 2002, Coimbra, September, 2002, pp.1247-1258). C.61 Manganiello M. C.62 Manganiello M. C.63 De Martino A. C.64 C.65 Inelastic behaviour of I-shaped aluminium beams (Proc. of Sixth International Conference on Computational Structures Technology, CST 2002, Prague, September, 2002, CD-ROM). A new classification criterion for aluminium cross-sections (Proc. of International Conference on Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA'03, Sydney, Australia, June, 2003, pp.433-441). Numerical modelling of thin-walled cold-formed steel C-sections in bending (Proc. Of International Conference on Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA'03, Sydney, Australia, June, 2003, pp.379-385). Seismic performance of steel stud shear walls: planning of testing program (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas",STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.153-159) Fire resistance of MR steel frames damaged by earthquakes (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.73-79) Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 13/38

C.66 Calderoni B. Faggiano B. Panico S. C.67 Faggiano B. de la Grennelais E. C.68 Manganiello M. C.69 C.70 C.71 Faggiano B. C.72 C.73 Manganiello M. C.74 Faggiano B. C.75 C.76 Full-scale testing of different seismic upgrading techniques on an existing RC building (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.719-726) Design criteria for RBS in MR frame retrofitting (Proc. of 4 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.683-690) Numerical evaluation of required ductility and load bearing capacity for aluminium alloy continuos beams (Proc. of Ninth International Conference on Civil and Structural Engineerig, CC03, Egmond aan Zee, The Netherlands, September, 2003, paper n.31). Finite element model of a brick masonry four-sided cloister vault reinforced with FRPs (Proc. of Ninth International Conference on Civil and Structural Engineerig, CC03, Egmond aan Zee, The Netherlands, September, 2003, paper n.100.). Cold-formed steel structures: advances in research and design (Proc. of International Colloquium on Recent Advances and New Trends in Strucutral Design, Timisoara, May, 2004, pp.59-70). Effects of high temperatures on the resistance of aluminium alloy structures (Proc. of International Conference on Modern Building Materials Structures and Techniques, Vilnius, May 2004, pp.405-412). On the characterization of the material properties for cold-formed steel members (Proc. of IV International Conference on Thin Walled Structures, Loughborough, Uk, June, 2004, pp.251-258). Eurocode 9 approach for cross-sectional classification of aluminium alloy members (Proc. of INALCO, Usa, June, 2004). The influence of material modelling on the fire resistance of aluminium alloy structures (Proc. of INALCO, Usa, June, 2004). Testing of sheathed cold-formed steel stud shear walls for seismic performance evaluation (Proc. of 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, 2004 Paper No. 2697). Local Buckling phenomena in built-up cold-formed beams: experimental and numerical investigations (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp.453-466). ISBN: 978-973-638-268-0 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 14/38

C.77 Manganiello M. C.78 De Martino A. C.79 C.80 C.81 Manganiello M. C.82 C.83 Faggiano B. C.84 C.85 Faggiano B. C.86 Faggiano B. C.87 C.88 Faggiano B. Local to flexural-torsional buckling interaction in aluminium alloy beams. (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp.367-380). ISBN: 978-973-638-268-0 Numerical modelling of thin-walled cold-formed steel C-sections in bending. (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp.153-162). ISBN: 978-973-638-268-0 Cold-formed steel housing in seismic areas. (Proc. of 32 IAHS World Congress, Trento, September, 2004, paper. n.101) Seismic performance of sheated cold-formed shear walls (Proc. of 17th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2004, pp.625-638). Numerical analysis of the steel roofing structure of the Umberto I Gallery in Naples (Proc. of International Specialty Conference on Structural Analysis of Historical Constructions, Padova, November, 2004, pp.1039-1048). Seismic response of light-gauge steel stick-built constructions: a research project. (Proc. of COST C12 Final Conference, Innsbrunck, January, 2005, pp.105-113). On the fire resistance of aluminium alloy structures (Proc. of COST C12 Final Conference, Innsbrunck, January, 2005, pp.267-275). Experimental and numerical tests on sheathed steel stick-built constructions. (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. A, 1.2.101-108). ISBN: 3-86130-812-6 Post-earthquake fire resistance of moment resisting steel frames (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. C, 5.1.127-135). ISBN:3-86130-812-6 Dog-bone technique for the seismic improvement of steel moment resisting frames (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. C, 5.2.105-113). ISBN:3-86130-812-6 Finite element modelling procedures for innovative built-up cold-formed beams (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. A, 1.2.77-84). ISBN:3-86130-812-6 The SFT: an innovative solution for waterway strait crossings (Proc. of IABSE Symposium Conference Structures and extreme events, Lisbon, September, 2005, LIS 146). Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 15/38

C.89 C.90 C.91 Formisano A. Faggiano B. C.92 C.93 Guerrieri M.R. C.94 PortioliF. C.95 Iuorio O. C.96 C.97 Krstevska L. Taskov Lj. Gramatikov K. C.98 Faggiano B., Esposto M.,, Experimental tests on sheathing-to-stud screw connections (Proc. of XI International Conference on Metal Structures, ICMS 2006, Rzeszow, June, 2006, Taylor & Francis Group, London, pp. 220-222). ISBN: 0-415-40120-8 Shear behavior of connections between cold-formed steel profiles and wood or gypsum based panels: an experimental investigation (Proc. 17th A&C Specialty Conference - ASCE 2006 Structures Congress, St. Louis, Missouri, May, 2006). Ductile behavioural classes of steel members for seismic design (Proc. of 5 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2006, Yokohama (Japan), August, 2006, Taylor & Francis Group, London, 2006 pp. 225-232). ISBN: 0-415-40824-5 Seismic response of steel frame/panel shear walls: modelling based on screw connection tests (Proc. of 5 th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2006, Yokohama (Japan), August, 2006, Taylor & Francis Group, London, 2006 pp. 503-510). ISBN: 0-415-40824-5 Lap-shear tests on laser welded connections for built-up cold-formed steel beams (Proc. of International Conference in Metal Structures, ICMS 2006, Poiana Brasov, Romania, September 2006, Taylor & Francis Group, London, 2006, pp. 307-314 ). ISBN: 0-415-40817-2 Experimental investigation on the load bearing capacity of built-up cold-formed steel beams (Proc. of International Colloquium on Stability and Ductility of Steel Steel Structures, SDSS 2006, Lisbon, September, 2006, IST PRESS, Lisbon pp. 665-672). ISBN: 972-8469-61-6 Cold-Formed Steel Housing (Proc. of 34 IAHS World Congress Sustainable Housing Design: Emphasizing Urban Housing", Naples, September, 2006, paper n. 46/A). ISBN: 88-6026-030-2 Lateral response of sheathed cold-formed shear walls: an analytical approach (Proc. of 18th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2006, pp. 603-619). Experimental and numerical investigations on the Mustafa Pasha Mosque large scale model. (Proc. of COST Action C26 Urban Habitat Constructions Under Catastrophic Events Workshop, Prague, 30-31 March 2007, pp. 158-169 ). ISBN: 978-80-01-03583-2 Fire analysis on steel poral frame damaged after earthquake according to performance based design (Proc. of COST Action C26 Urban Habitat Constructions Under Catastrophic Events Workshop, Prague, 30-31 March 2007, pp. 35-40 ). ISBN: 978-80-01-03583-2 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 16/38

C.99 Iuorio O.,., C.100* Guerrieri M.R. C.101 C.102 Iuorio O. C.103 C.104 Guerrieri M.R. C.105 Brescia M. C.106 Cascini L. C.107 Cascini L. C.108 Iuorio O. C.109 Seismic design of cold-formed steel housing: a case study (Proc. of COST Action C26 Urban Habitat Constructions Under Catastrophic Events Workshop, Prague, 30-31 March 2007, pp. 245-251 ). ISBN: 978-80-01-03583-2 Laser welded built-up cold-formed steel beams: experimental investigations (Proc. of The Professor Jim Rhodes Retiral Conference, Glasgow, 26-27 June 2007. Bending strength of buil-up cold-formed steel members stiffened by diagonal web beads (Proc. of International Conference on Steel and Aluminium Structures, ICSAS 07, Oxford, 2007, pp. 832-839). ISBN: 978-0-9556254-0-4 Seismic design of cold-formed steel housing: an analytical approach based on screw connection tests (Proc. of International Conference on Steel and Aluminium Structures, ICSAS 07, Oxford, 2007, pp.228-237 ). ISBN: 978-0-9556254-0-4 Nomographs for seismic design of single-storey sheathed cold-formed frame structures (Proc. of International Conference on Recent Developments in Strucutral Engineering, Mechanics and Computation, CapeTown, September 2007, Millpress, Rotterdam, pp. 370-375). Finite element modeling of laser welded connections for built-up cold-formed steel beams (Proc. of The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, 18-21 Sept., 2007, Civil-Comp Press. Paper n. 148). On the classification of steel members in seismic areas (Proc. of The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, 18-21 Sept., 2007, Civil- Comp Press. Paper n. 202). Durability design of metal structures based on lifetime safety factor method (Proc. of International Conference on Sustainable Construction, Material and Practices, SB07, Lisbon, 2007, pp. 522-529). ISBN: 978-1-58603-785-7 Modelling of corrosion damage for metal structures (Proc. of International First Workshop COST Action C25, Lisbon, September 2007, pp. 3.11-3.20. ). ISBN: 978-989-20-0787-8 A specific procedure for the seismic design of cold-formed steel housing (Proc. of 5 th International Conference on Advances in Steel Structures, ICASS07, Singapore, December 2007, pp.298-305 ). ISBN: 978-981-05-9365-0 Finite element and limit analysis of the large scale model of Mustafa Pasha mosque in Skopje strengthened with FRP (Proc. of the First Asia-Pacific Conference on FRP in Structures, Hong Kong, December 2007, pp. 283-288). ISBN: 978-962-8014-14-9 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 17/38

C.110 Krstevska L. Tashkov Lj. Gramatikov K. C.111 D'Aniello M. C.112 Iuorio O. C.113 Guerrieri M.R. C.114 Mandara A. Shaking table tests on the large scale model of Mustafa Pasha Mosque without and with FRP (Proc. of the Sixth International Conference on Structural Analysis of Historic Construction Preserving, Safety and Significance, Bath, July 2008, Taylor & Francis Group, London, 2008, pp. 383-391). ISBN 978-0-415-46872-5 Structural performance of riveted connections in historical metal structures (Proc. of the Sixth International Conference on Structural Analysis of Historic Construction Preserving, Safety and Significance, Bath, July 2008, Taylor & Francis Group, London, 2008, pp. 431-439). ISBN 978-0-415-46872-5 Cold-formed steel housing in seismic zone: a design procedure (Proc. of 5 th International Conference on Thin-Walled Structures ICTWS 2008 - Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp.379-386). ISBN 978-1-74107-239-6 Flexural strength of innovative built-up cold-formed steel beams assembled by laser welding (Proc. of 5 th International Conference on Thin-Walled Structures ICTWS 2008 - Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp.443-450). ISBN 978-1-74107-239-6 The EC9 Approach to Thin-Walled Structures (Proc. of 5 th International Conference on Thin-Walled Structures ICTWS 2008 - Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp.923-930). ISBN 978-1-74107-239-6 C.115 Di lorenzo G. Numerical analysis of local buckling in built-up cold-formed steel beams assembled by laser welding (Proc. of 5 th International Conference on Coupled Instabilities in Metal Structures CIMS 2008 - Sydney, Australia, June 2008, The University of Sydney, Sydney, pp.367-374). ISBN 978-0-646-49439-5 C.116 Guerrieri M.R. C117 D Aniello M. C118 D Aniello M. Cascini L. Performance of built-up cold-formed steel beams assembled with mechanical and laser welded connections (Proc. of 5 th European Conference on Steel and Composite Structures Eurosteel 2008 - Graz, Austria, September 2008, ECCS, Brussels, pp.69-74). ISBN 92-0147-000-90. Riveted connections in historic metal strucutures: an experimental study (Proc. of 5 th European Conference on Steel and Composite Structures Eurosteel 2008 - Graz, Austria, September 2008, ECCS, Brussels, pp.699-704). ISBN 92-0147-000-90 Vulnerability assessment of a historic railway bridge (Proc. of 5 th European Conference on Steel and Composite Structures Eurosteel 2008 - Graz, Austria, September 2008, ECCS, Brussels, pp.1275-1280). ISBN 92-0147-000-90 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 18/38

C119 Ly L., Demonceau J.F., Jaspart J.P. Experimental and numerical investigations on iron columns reinforced by FRP under axial compression (Proc. of the International Colloquium Seismic Risk 2008 - Eearthquakes in North West Europe, Liège, September 2008, pp.183-190) C.120 Vesikari E. C.121 Vesikari E. C.122 Negro P. Mola E. Cascini L. C123 Iuorio O. C124 Piluso V. Brescia M. D Aniello M. Tortorelli S. C125 Formisano A. Florio G. C126 C127 C128 Annecchiarico M. State-of-the-art report on service life design methods (Proc. of International Seminar on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp. 4.11-4.21). ISBN: 978-3-86780-094-5 Durability and service life prediction methodologies (Proc. of International Seminar on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp. 4.3-4.10). ISBN: 978-3-86780-094-5 Life-cycle assessment of the Spear buildings (Proc. of International Seminar on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp. 4.85-4.94). ISBN: 978-3-86780-094-5 Experimental response of connections between cold-formed steel profile and cement-based panel (Proc. of 19th International Specialty Conference on Cold Formed Steel Structures, St. Louis, October, 2008, pp. 603-619). Rotation capacity vs. demand of steel beams under catastrophic enents (Proc. of Urban Habitat Costructions Under Catastrophic Events, COST Action C26 Malta, 23-25 October, 2008, pp. 146-151). ISBN 9789990944402 The Vesuvius risk scenario: the seismic vulnerability of the palazzo di città in Torre del Greco (NA) (Proc. of Urban Habitat Costructions Under Catastrophic Events, COST Action C26 Malta, 23-25 October, 2008, pp. 495-501). ISBN 9789990944402 Analisi numerica della prestazione sismica del modello in grande scala della moschea di Mustafa Pasha in Skopje (Proc. of the Wondermasonary) Design of the retrofitting system with FRP of the Mustafa Pasha Mosque in Skopje by numerical models, (Proc. of III International Conference on Mechanics of masonry structures strengthened with composite materials - modeling, testing, design, control, MURICO 3, Venice, Italy, 22-24 April 2009, pp. 333-340). ISBN 88-371-1771-X FE simulation of masonry wall samples of Mustafà Pasha mosque by homogeneus continuum models: Analysis and calibration (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 95-100). ISBN 9780415558044 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 19/38

C129 D Aniello M. Cascini L. C130 C131 Parrilli M. D Aniello M. An integrated approach for the vulnerability assessment of a historical metal railway bridge (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 183-188). ISBN 9780415558044 Numerical analysis of the large scale model of Mustafà Pasha Mosque in Skopje strengthened with FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 617-622). ISBN 9780415558044 The seismic protection of Umberto I Gallery in Naples with FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 623-628). ISBN 9780415558044 C132 Ly L., Demonceau J.F., Jaspart J.P. Proposed design rules for iron columns reinforced by FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 629-634). ISBN 9780415558044 C133 D Aniello M. C134 Florio G. Formisano A. C135 Krstevska L. Tashkov Lj. Gramatikov K. C136 Martire G. Esposto M. Faggiano B. Zollo A. Stabile T.A. C137 Iuorio O. C138 Brescia M, Iannone F. Piluso V. Rizzano G. Experimental analysis of riveted connections in historic metallic structures (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 1227-1232). ISBN 9780415558051 Vulnerability of a historical masonry building in the Vesuvius area (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 1483-1488). ISBN 9780415558051 Shaking table test of Mustafà Pasha Mosque model in reduced scale (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 1633-1640). ISBN 9780415558051 The structural response of submerged floating tunnel to multi-support seismic excitations (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, 16-20 June 2009, pp. 19-26). ISBN 9780415563260 Seismic analysis of sheating-braced cold-formed steel structures (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, 16-20 June 2009, pp. 913-918). ISBN 9780415563260 Preliminary results of an experimental program of the cyclic response and rotation capacity of steeel members (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, 16-20 June 2009, pp. 971-976). ISBN 9780415563260 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 20/38

C139 Gramatikov K. Taskov L. Krstevska L. Lazarov L. Kokalanov G. Dumova-Jovanoska E. Numerical and Experimental Analysis of Three Strengthening Techniques applied on Three Large Scale Models in the frame of PROHITECH project (Proc. Of 13th International Symposium of Macedonian Association of Structural Engineers (MASE), Skopje, Republic of Macedonia, 14th - 17th October 2009, pp. 49-62 ) ISBN 9989978517 C140 Durability Design of Metal Structures (Proc. of International Symposium on Sustainability of Constructions Integrated Approach to Life-time Structural Engineering. COST Action C25, Malta, 26 July 1 August 2010, pp. 287-320) ISBN 9789993209188 C141 Plumier A. Dubina D. C142 Marmo R. D Aniello M. C143 Annecchiarico M. C144 D Aniello M. C145 Iuorio O. Macillo V. C146 Tortorelli S. D Aniello M. C147 Demands and recommendations for assessment and mitigation of risk under exceptional earthquakes (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Report, COST Action C26, Napoli, 16-18 September 2010, pp. 403-421) ISBN 9780415606868 Finite element modelling of lap shear riveted connections in fire (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 249-254) ISBN 9780415606851 Micro and macro-finite element modeling of brick masonry panels subject to lateral loadings (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 315-320) ISBN 9780415606851 Modelling issues of steel braces under extreme cyclic actions (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 335-341) ISBN 9780415606851 Seismic response of sheathed cold-formed steel structures under catastrophic events (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 377-382) ISBN 9780415606851 Lateral capacity of steel structures designed according to EC8 under catastrophic seismic events (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 409-414) ISBN 9780415606851 Seismic assessment of historical mosques under exceptional earthquakes: A case study in Skopje (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp.415-420) ISBN 9780415606851 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 21/38

C148 Krstevska L. Tashkov L. Naumovski N. Florio G. Formisano A. Fornaro A. In-situ experimental testing of four historical buildings damaged during the 2009 L Aquila earthquake (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 427-432) ISBN 9780415606851 C149 Formisano A. Florio G. C150 Formisano A. Florio G. De Masi G. Delli Priscoli G. Indirli M. A quick methodology for seismic vulneradility assessment of historical masonry aggregates (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 577-582) ISBN 9780415606851 Seismic vulnerability analysis of historical centres: A GIS application in Torre del Greco (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 583-588) ISBN 9780415606851 C151 Formisano A. Terracciano G. On the use of cold-formed thin walled members for vertical addition of existing masonry buildings (Proc. of International Colloquium Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, 08-10 September 2010, pp. 945-952) ISBN 9788528501377 C152 C153 C154 D Aniello M. Analysis of contact buckling in built-up cold-formed steel beams assembled by laser welding (Proc. of International Colloquium Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, 08-10 September 2010, pp. 1109-1116) ISBN 9788528501377 Displacement-based seismic design of steel braced structures (Proc. of International Symposium on Steel Structures: Culture e Sustainability, Istanbul, Turkey, 21-23 September 2010, pp. 161-170) ISBN 9789759246129 Simulation of inelastic cyclic behaviour of steel concentric bracings (Proc. of 14 Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August 03 September 2010, CD-ROM no. 1816) ISBN 9786086518516 C155 Tashkov L. Naumovski N. Florio G. Formisano A. Fornaro A. Brando G. Experimental testing of historical buildings in Abruzzo region damaged during L' Aquila earthquake 2009 (Proc. of 14 Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August 03 September 2010, CD-ROM no. 1868) ISBN 9786086518516 Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 22/38