ELENCO PROVE ACCREDITATE - CATEGORIA: 0

Transcript

1 Scheda 1 di 22 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Apparecchiature Elettriche ed Elettroniche (AEE) Compatibilità elettromagnetica (EMC) Parte 4-17: Tecniche di prova e di misura - Prova di immunità all'ondulazione residua sulla porta di alimentazione in c.c. Compatibilità elettromagnetica (EMC): Emissione per gli ambienti industriali (150kHz 1GHz) Compatibilità elettromagnetica (EMC): Emissione per gli ambienti residenziali, commerciali e dell industria leggera (50Hz 1GHz) Compatibilità elettromagnetica (EMC): Emissioni di corrente armonica Compatibilità elettromagnetica (EMC): Emissioni radiate e condotte (30MHz 1000MHz; 9kHz 30MHz) Compatibilità elettromagnetica (EMC): Emissioni radiate e condotte (30MHz 6GHz; 150kHz 30MHz) Compatibilità elettromagnetica (EMC): Immunità ai disturbi condotti, indotti da campi a radiofrequenza (150kHz 230MHz; 3 10V/m) Compatibilità elettromagnetica (EMC): Immunità per gli ambienti industriali (50Hz 2,7GHz) Compatibilità elettromagnetica (EMC): Immunità per gli ambienti residenziali, commerciali e dell'industria leggera Compatibilità elettromagnetica (EMC): Misura delle fluttuazioni di tensione e del flicker Compatibilità elettromagnetica (EMC): Prescrizioni per gli elettrodomestici, gli utensili elettrici e gli apparecchi similari Parte 1: Emissione (150kHz 1GHz) Compatibilità elettromagnetica (EMC): Prova d'immunità sui campi irradiati a radiofrequenza (20MHz 2,7GHz; 3 10V/m) Compatibilità elettromagnetica (EMC): Prova di immunità a campi magnetici a frequenza di rete (50 60Hz; 3 30A/m) Compatibilità elettromagnetica (EMC): Prova di immunità a onde oscillatorie (100kHz; 4kV) Compatibilità elettromagnetica (EMC): Prova di immunità a transitori/treni elettrici veloci (0,5 5,3kV) Compatibilità elettromagnetica (EMC): Prova di immunità ad impulso (0,5 8kV) Compatibilità elettromagnetica (EMC): Prova di immunità ai disturbi condotti di modo comune nella gamma di frequenze da 0 a 150 khz (0 150kHz; 10V) Compatibilità elettromagnetica (EMC): Prove di immunità a buchi di tensione, brevi interruzioni e variazioni di tensione (0,1ms 5s; 0 100%) EN : A1: A2:2009, IEC : A1: A2:2008 EN : A1:2011, IEC : A1:2010 EN : A1: AC:2012, IEC : A1:2010 EN : A1: A2:2009, EN :2014, IEC : A1: A2:2009, IEC :2014 EN 55011: A1:2010, CISPR 11: A1:2010, CISPR 11: A1:2016 EN 55022: A1: A2:2010, EN 55022: AC:2011, CISPR 22: A1: A2:2006, CISPR 22:2008 EN : A1:2001, EN : IS1:2009, EN :2014, IEC : A1: A2:2006, IEC :2008, IEC :2013 EN :2005, IEC :2005, IEC :2016 EN :2007, IEC :2005 EN :2008, EN :2013, IEC :2008, IEC :2013 EN : A1: A2:2011, CISPR 14-1: A1: A2:2011, CISPR 14-1:2016 EN : A1: A2:2001, EN : A1:2002, EN : A1: A2:2010, IEC : A1: A2:2000, IEC : A1:2002, IEC : A1: A2:2010 EN : A1:2001, EN :2010, IEC : A1:2000, IEC :2009 EN :2006, IEC :2006 EN : A1: A2:2001, EN : A1:2010, EN :2012, IEC : A1: A2:2001, IEC : A1:2010, IEC :2012 EN : A1:2001, EN :2006, EN :2014, IEC : A1:2000, IEC :2005, IEC :2014 EN : A1: A2:2011, IEC : A1: A2:2009, IEC :2015 EN : A1: A2:2001, EN :2004, IEC : A1:2000, IEC :2004

2 Scheda 2 di 22 Compatibilità elettromagnetica (EMC): Prove di immunità a scarica elettrostatica (2 6kV aria; 2 8kV contatto) Campi elettromagnetici a radio frequenza Limitazione dell'esposizione umana ai campi elettromagnetici prodotti da dispositivi operanti nella gamma di frequenza 0 Hz GHz, utilizzati nei sistemi elettronici antitaccheggio (EAS), nei sistemi di identificazione a radio frequenza (RFID) e in applicazioni similari Metodi di misura per campi elettromagnetici degli apparecchi elettrici di uso domestico e similari con riferimento all'esposizione umana Norma di prodotto per dimostrare la conformità delle stazioni radio base e delle stazioni terminali fisse per sistemi di telecomunicazione senza fili ai limiti di base e ai livelli di riferimento relativi all'esposizione umana ai campi elettromagnetici a radio frequenza (110 MHz - 40 GHz) - Popolazione Valutazione della conformità di apparati elettrici ed elettronici di debole potenza alle restrizioni di base relative all'esposizione umana ai campi elettromagnetici (10 MHz GHz) EN : A1: A2:2001, EN :2009, IEC : A1: A2:2000, IEC :2008 EN 50364:2010 EN 62233:2008, IEC 62233:2005 EN 50385:2002 EN 62479:2010, IEC 62479:2010 Componenti ed equipaggiamenti elettrici dei veicoli a motore Immunità ed Emissione di transitori da parte di UEE ISO : A1: ISO : A1:2008, ISO :2011, Dir. 2004/104/CE 14/10/2004 GU UE L337 13/11/2004 (All. X), Dir. 2009/19/CE 12/03/2009 GU UE L70 14/03/2009, Reg. UNECE R10 06/03/2012 (Allegato X) + Cor. 1: Amd1: Amd2:2013, Regulation 10 Rev. 5: A1:2016 Componenti ed equipaggiamenti elettrici/elettronici dei veicoli a motore Emissioni elettromagnetiche irradiate da UEE (30MHz 1000MHz) Immunità ai campi elettromagnetici - Metodo della Bulk Current Injection (BCI) (1 400MHz) Immunità ai campi elettromagnetici - Metodo della camera anecoica (20MHz 2,6GHz, 30Vm) EN 55025:2003, CISPR 25:2002, Dir. 2004/104/CE 14/10/2004 GU UE L337 13/11/2004 (All. VII, All. VIII), Dir. 2009/19/CE 12/03/2009 GU UE L70 14/03/2009, Reg. UNECE R10 06/03/2012 (Allegato X) + Cor. 1: Amd1: Amd2:2013, Regulation 10 Rev. 5: A1:2016 ISO : Amd1: ISO : Cor 1:2009, ISO :2011, ISO :2015, Dir. 2004/104/CE 14/10/2004 GU UE L337 13/11/2004 (All. IX), Dir. 2009/19/CE 12/03/2009 GU UE L70 14/03/2009, Reg. UNECE R10 06/03/2012 (Allegato X) + Cor. 1: Amd1: Amd2:2013, Regulation 10 Rev. 5: A1:2016 ISO : Amd1: ISO :2004, Dir. 2004/104/CE 14/10/2004 GU UE L337 13/11/2004 (All. IX), Dir. 2009/19/CE 12/03/2009 GU UE L70 14/03/2009, Reg. UNECE R10 06/03/2012 (Allegato X) + Cor. 1: Amd1: Amd2:2013, Regulation 10 Rev. 5: A1:2016 Immunità ai campi elettromagnetici - Metodo della Cella TEM (0,01 200MHz) ISO : Amd1 2008, ISO :2001, Dir. 2004/104/CE 14/10/2004 GU UE L337 13/11/2004 (All. IX), Dir. 2009/19/CE 12/03/2009 GU UE L70 14/03/2009, Reg. UNECE R10 06/03/2012 (Allegato X) + Cor. 1: Amd1: Amd2:2013, Regulation 10 Rev. 5: A1:2016 Electric and electronic equipment. Apparecchiature Elettriche ed Elettroniche (AEE)

3 Scheda 3 di 22 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification. Macchine elettriche rotanti Parte 5: Gradi di protezione degli involucri delle macchine rotanti (progetto integrale) (Codice IP) - Classificazione EN : A1:2007, IEC : A1:2006 Electric, electronic and mechanical equipment, components and materials. Apparecchiature elettriche, elettroniche e meccaniche, componenti e materiali Degrees of protection provided by enclosures (IP Code). Gradi di protezione degli involucri (Codice IP) EN 60529: A1:2000, IEC 60529: A1:1999 Environmental testing - Part 2-1: Tests - Test A: Cold. Prove ambientali - Prova A: Freddo (-70 C+10 C) Environmental testing - Part 2-14: Tests - Test N: Change of temperature. Prove ambientali, Prova N: Cambio di temperatura (-70 C 180 C) Environmental testing - Part 2-2: Tests - Test B: Dry heat. Prove ambientali - Prova B: Caldo secco (0 C 180 C) Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock. Prove ambientali - Parte 2-27: Prove - Prova Ea e guida: Urti (1-30 ms; 0-30 G) Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h / 12 h cycle). Prove ambientali - Prova Db: Caldo umido, ciclico (ciclo di 12h + 12h) (-70 C 180 C) Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal). Prove ambientali Parte 2-6: Prove - Prova Fc: Vibrazioni (sinusoidali) ( Hz) Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance. Prove ambientali - Parte 2: Metodi di prova - Prova Fh: Vibrazioni aleatorie a larga banda e guida (5Hz 2000Hz) Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state. Prove ambientali, Prova Cab: Caldo umido, regime stazionario (30 C 150 C; 30% 98RH) Environmental testing - Part 2: Tests - Test Ka: Salt mist. Prove ambientali Parte 2: Prove - Prova Ka: Nebbia salina Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium, chloride solution). Prove ambientali Parte 2: Prove - Prova Kb: Nebbia salina, ciclica (soluzione di cloruro di sodio) EN :2007, IEC :2007 EN :2009, IEC :2009 EN :2007, IEC :2007 EN :2009, IEC :2008 EN :2005, IEC :2005 EN :2008, IEC :(2007 EN :2008, IEC :2008 EN :2001, EN :2013, IEC :2001, IEC :2012 EN :1999, IEC :1981 EN :1996, IEC :1996 Electrical equipment for measurement, control and laboratory use. Apparecchi elettrici di misura, controllo e laboratorio. EMC requirements - Part 1: General requirements. Prescrizioni di compatibilità elettromagnetica Parte 1: Prescrizioni generali EN :2006, EN :2013, IEC :2005, IEC :2012 Electrical lighting and similar equipment. Apparecchiature elettriche di illuminazione e apparecchiature similari Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. Limiti e metodi di misura delle caratteristiche di radiodisturbo delle apparecchiature elettriche di illuminazione e apparecchiature similari EN 55015: A1: A2:2009, EN 55015: A1:2015, CISPR 15: A1: A2:2008, CISPR 15: A1:2015 Electrical relays. Relè elettrici Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests. Parte 5: Coordinamento dell'isolamento per i relè di misura e per i dispositivi di protezione Prescrizioni e prove Electromagnetic compatibility EN :2001

4 Scheda 4 di 22 Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard Electromagnetic compatibility (EMC) Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility EN : A1: A2:2008, EN :2015, CISPR 14-2: A1: A2:2008, CISPR 14-2:2015 EN :2001 EN :2000 EN :2008 EN :2008 EN :2008 EN :2008 EN :2011 EN :1996, IEC :1995 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to MHz frequency range with power levels ranging up to 500 mw; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive Effective radiated power, Unwanted emissions in the spurious domain, Spurious radiations, Average power (conducted), Effective radiated power, Unwanted emissions in the spurious domain, Receiver spurious radiation ETSI EN V2.4.1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Transmitter spurious and out-of-band emissions, Receiver spurious emissions, Transmitter spurious and out-of-band emissions, Receiver spurious emissions ETSI EN V1.5.1:2010, ETSI EN V1.6.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Unwanted emissions in the spurious domain, Spurious radiations, Unwanted emissions in the spurious domain, Unwanted emissions in the spurious domain, Spurious radiations, Unwanted emissions in the spurious domain ETSI EN V1.4.1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

5 Scheda 5 di Occupied channel bandwidth, Transmitter unwanted emissions in the out-of-band domain, Transmitter unwanted emissions in the spurious domain, Receiver spurious emissions, Occupied chnnel bandwidth, Transmitter unwanted emissions in the out-of-band domain, Transmitter unwanted emissions in the spurious domain, Receiver spurious emissions, Occupied channel bandwidth, Transmitter unwanted emissions in the out-of-band domain, Transmitter unwanted emissions in the spurious domain, Receiver spurious emissions ETSI EN V1.9.1:2015 Equipment for general lighting purposes. Apparecchiature per illuminazione generale EMC immunity requirements. Prescrizioni di immunità EMC EN 61547:2009, IEC 61547:2009 Household and similar electrical appliances - Safety - Part 1: General requirements. Sicurezza degli apparecchi elettrici d'uso domestico e similare - Sicurezza Parte 1: Norme generali of transformers and associated circuits, 18 - Endurance, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction (excluded 22.57), 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminals for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat and fire, 31 - Resistance to rusting, 32 - Radiation, toxicity and similar hazards EN : A11:2014, IEC : A1: A2:2006, IEC : A1: A2:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per apparecchi aventi bruciatori a gas, gasolio e combustibile solido provvisti di connessioni elettriche 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking. EN : A1:2010, EN :2016, IEC : A1: A2:2012, Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per le cabine con doccia multifunzione 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking. EN : A1: A11:2010, IEC : A1: A2:2013 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Macchine da cucina

6 Scheda 6 di 22 EN : A1: A11:2012, IEC : A1: A2:2012, IEC :2016 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Apparecchi per il riscaldamento di liquidi 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking EN : A1: A2: A11:2012, EN :2016, IEC : A1: A2:2008, IEC : A1:2016 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Aspirapolvere ed apparecchi per pulizia ad aspirazione d'acqua EN : A11: A1:2013, IEC : A1: A2:2016 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Apparecchi per la cura della pelle e dei capelli EN : A1: A11: A2:2015, IEC : A1: A2:2012 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Frigoriferi, congelatori e produttori di ghiaccio

7 Scheda 7 di 22 EN :2010, IEC : A1:2012 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per caricabatterie 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking. EN : A2:2010, IEC : A1: A2:2009 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Ferri da stiro 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking. EN : A1: A2: A11:2010, EN :2016, IEC : A1: A2:2008, IEC : A1:2015 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Apparecchi di riscaldamento dei locali EN : A11: AC:2014, IEC :2009 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Cappe da cucina EN : A1: A2:2009, EN :2014, IEC : A1: A2:2008, IEC :2012

8 Scheda 8 di 22 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Cucine, forni e piastre di cottura elettriche per uso collettivo EN : A1: A2: A11:2012, IEC : A1: A2:2008 Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Piastre a grigliare elettriche per uso collettivo EN : A1:2008, IEC : A1:2008 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Forni elettrici a ventilazione forzata per uso collettivo EN : A1: A11:2012, IEC : A1:2008 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Pentole elettriche per uso collettivo EN : A A11:2012, IEC : A1:2008 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Grill e tostapane elettrici per uso collettivo

9 Scheda 9 di 22 EN : A1: A11:2012, IEC : A1:2008 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm. Sicurezza degli apparecchi elettrici d'uso domestico e similare Parte 2: Norme particolari per armadi caldi elettrici per uso collettivo EN : A1: A11:2012, IEC : A1:2008 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2:Norme particolari per lavastoviglie EN : A1: A2: A11: A12:2012, EN :2015, IEC : A1: A2:2008, IEC :2012 Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Apparecchi bagnomaria per uso collettivo EN : A1:2008, IEC : A1:2007 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Apparecchi per la pulizia di superfici che impiegano liquidi

10 Scheda 10 di 22 EN : A11: A1:2015, IEC : A1:2015 Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per lavastoviglie elettriche per uso collettivo EN :2005 A1:2008 A11: A2: A12:2016, IEC : A1: A2:2015 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Cucine, fornelli, forni ed apparecchi similari per uso domestico EN : A1: A2: A11: A12: A13:2013, EN :2015, IEC : A1: A2:2008, IEC :2014 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Vasche per idromassaggio ed apparecchiature analoghe EN : A1: A2: A11: A , IEC : A1: A2:2008 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per macchine lavabiancheria

11 Scheda 11 di 22 EN : A1: A11:2013, IEC : A1:2011 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per macchine automatiche per il trattamento dei pavimenti per uso industriale e collettivo EN :2009, EN :2012, IEC : A1:2005, IEC :2012 Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Apparecchi per la distribuzione e la vendita EN : A1: A2: A11: A12:2010, IEC : A1: A2:2008, IEC : A1:2015 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Tostapane, griglie, ferri da cialda, arrostitrici e apparecchi simili 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking. EN : A1: A2: A12: A13: AC: AC:2012, IEC : A1: A2:2016 Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers. Sicurezza degli apparecchi elettrici d uso domestico e similare - Parte 2: Norme particolari per Umidificatori

12 Scheda 12 di 22 7 Marking and unstructions, 8 Protection against accessibility to live parts, 10 Power input and current, 11 - Heating, 13 - Leakage curr. & elect. str. at operating temp., 15 - Moisture resistance, 16 Leakage current and electric strength, 17 - Overload protection of transformers and associated circuits, 19 - Abnormal operation, 20 - Stability and mechanical hazards, 21 - Mechanical strength, 22 - Construction, 23 - Internal wiring, 24 - Components, 25 - Supply connection and external flexible cords, 26 - Terminal s for external conductors, 27 - Provision for earthing, 28 - Screws and connections, 29 - Creepage distances clearances and distances through insulation, 30 - Resistance to heat fire and tracking. Industrial, Scientific and Medical (ISM) Radio Frequency Generators Canadian Standards Association Standard CAN/CSA-CEI/IEC CISPR 11-04, Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment - Electromagnetic Disturbance Characteristics - Limits and Methods of Measurement. Industrial, Scientific, and Medical Equipment (FCC Part 18) Electromagnetic compatibility - Radiated and conducted emissions (up to 40 GHz) EN : A1: A2:2008, IEC : A1: A2:2008 ICES-001 Issue 4:2006 FCC MP-5 (February 1986) Information technology equipment - Safety - Part 1: General requirements. Apparecchiature per la tecnologia dell'informazione - Sicurezza - Parte 1: Requisiti generali Input current, Durability, Protection in operator access areas, Limits of TNV circuits, Separation from hazardous voltage, Test for operating voltages generated externally, Limited current determination, Resistance of earthing conductors, Humidity conditioning, Creepage/clearance/distance through insulation (determination of requirements; working voltage measurements), Measurement of transient levels, Creepage distances, Thermal cycling and thermal ageing, Thermal cycling and thermal ageing, Abrasion resistance test, Enclosed and sealed parts, Cord anchorage and strain relief, Cord guards, 4.1 -Stability, Steady force test 30 N, Steady state force, 250 N, Impact test, Drop test, Stress relief, Wall or ceiling mounted equipment, Handles and manual controls Force, Handles and manual controls Force, Direct plug-in equipment, Flammable liquids, Protection against hazardous moving parts, Thermal requirements - Voltage supply - Temperature (rise) - Loading, Resistance to abnormal heat, Adhesives for constructional purposes, Materials, Materials used in high-voltage components, Touch current and protective conductor current, Electric strength, Protection of equipment users from over voltage on telecommunication networks, Impulse Test EN : A11: A1: A12: A2:2013, IEC : A1: A2:2013 Information technology equipment - Safety - Part 22: Equipment installed outdoors. Apparecchiature per la tecnologia dell'informazione - Sicurezza - Parte 22: Apparecchiature installate all'aperto 5 Marcatura e istruzioni, 6 Protezione dalle scosse elettriche in un' area esterna, 7 Morsetti di cablaggio per il collegamento di conduttori esterni, 8 Protezioni di costruzione per involucri esterni, 0 Protezione dell'apparecchiatura all'interno di un involucro per esterni, 10 Resistenza meccanica degli involucri, 11 Apparecchiature per esterni conteneti batterie ventilate. Information Technology Equipment (ITE) Limits and Methods of Measurement 6.1 AC Power Line Conducted Emissions Limits, 6.2 Radiated Emissions Limits EN : A11:2008, IEC :2005, IEC :2016 Information technology equipment. Apparecchiature per la tecnologia dell'informazione ICES-003 Issue 5:2012, ICES-003 Issue 6:2016

13 Scheda 13 di 22 Immunity characteristics - Limits and methods of measurement. Caratteristiche di immunità - Limiti e metodi di misura EN 55024: A1:2015, CISPR 24: A1:2015 Intentional Radiators (FCC Part 15, Subpart C) Electromagnetic compatibility - Radiated and conducted emissions (up to 40 GHz) ANSI C Lamp controlgear - Part 1: General and safety requirements. Unità di alimentazione di lampada Parte 1: Prescrizioni generali e di sicurezza 4 General requirements - 7 Marking - 8 Terminals - 9 Earthing - 10 Protection against accidental contact with live parts - 11 Moisture resistance and insulation - 12 Electric strength - 13 Thermal endurance test for windings of ballasts - 14 Fault conditions - 15 Construction - 16 Creepage distances and clearances - 17 Screws, current-carrying parts and connections - 18 Resistance to heat, fire and tracking - 19 Resistance to corrosion - 10 No-load output voltage EN : A1: A2:2013, EN :2015, IEC : A1: A2:2012, IEC :2015 Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires. Dispositivi di controllo per lampade Parte 2-11: Prescrizioni particolari per circuiti elettronici eterogenei usati con gli apparecchi di illuminazione 4 General requirements - 7 Marking - 8 Terminals - 9 Earthing - 10 Protection against accidental contact with live parts - 11 Moisture resistance and insulation - 12 Electric strength - 13 Thermal endurance test for windings of ballasts - 14 Fault conditions - 15 Construction - 16 Creepage distances and clearances - 17 Screws, current-carrying parts and connections - 18 Resistance to heat, fire and tracking - 19 Resistance to corrosion - 10 No-load output voltage EN :2001, IEC :2001 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules. Unità di alimentazione di lampada Parte 2-13: Prescrizioni particolari per unità di alimentazione elettroniche alimentate in corrente continua o in corrente alternata per moduli LED 4 General requirements - 7 Marking - 8 Terminals - 9 Earthing - 10 Protection against accidental contact with live parts - 11 Moisture resistance and insulation - 12 Electric strength - 13 Thermal endurance test for windings of ballasts - 14 Fault conditions - 15 Construction - 16 Creepage distances and clearances - 17 Screws, current-carrying parts and connections - 18 Resistance to heat, fire and tracking - 19 Resistance to corrosion - 10 No-load output voltage EN :2006, EN :2014, IEC :2006, IEC : A1:2016 Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained). Unità di alimentazione di lampada Parte 2-7: Prescrizioni particolari per unità di alimentazione elettroniche (autonome) alimentate da batterie per illuminazione di emergenza 4 General requirements - 7 Marking - 8 Terminals - 9 Earthing - 10 Protection against accidental contact with live parts - 11 Moisture resistance and insulation - 12 Electric strength - 13 Thermal endurance test for windings of ballasts - 14 Fault conditions - 15 Construction - 16 Creepage distances and clearances - 17 Screws, current-carrying parts and connections - 18 Resistance to heat, fire and tracking - 19 Resistance to corrosion - 10 No-load output voltage EN :2012, IEC :2011 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps). Unità di alimentazione di lampada Parte 2-9: Prescrizioni particolari per unità di alimentazione per lampade a scarica (escluse le lampade fluorescenti)

14 Scheda 14 di 22 4 General requirements - 7 Marking - 8 Terminals - 9 Earthing - 10 Protection against accidental contact with live parts - 11 Moisture resistance and insulation - 12 Electric strength - 13 Thermal endurance test for windings of ballasts - 14 Fault conditions - 15 Construction - 16 Creepage distances and clearances - 17 Screws, current-carrying parts and connections - 18 Resistance to heat, fire and tracking - 19 Resistance to corrosion - 10 No-load output voltage EN :2013, IEC :2012 Luminaires Part 2: Particular requirements Section One: Fixed general purpose luminaires. Apparecchi di illuminazione Parte II: Prescrizioni particolari Apparecchi fissi per uso generale Luminaires - Part 1: General requirements and tests. Apparecchi di illuminazione Parte 1: Prescrizioni generali e prove EN : 1989, IEC : A1:1987 EN : A11:2009, EN :2015, IEC :2008, IEC :2014 Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires. Apparecchi di illuminazione Parte 2-13: Prescrizioni particolari - Apparecchi di illuminazione da incasso a terra EN : A1:2012, IEC : A1:2011 Luminaires - Part 2-2: Particular requirements - Recessed luminaires. Apparecchi di illuminazione Parte 2-2: Prescrizioni particolari - Apparecchi di illuminazione da incasso Luminaires - Part 2-20: Particular requirements - Lighting chains EN :2012, IEC :2011 EN :2010, EN :2015, IEC :2010, IEC :2014

15 Scheda 15 di 22 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting. Apparecchi di illuminazione Parte 2-22: Prescrizioni particolari - Apparecchi di emergenza EN : A1: A2:2008, EN :2014, IEC : A1: A2:2008, IEC :2014 Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting. Apparecchi di illuminazione Parte 2-3: Prescrizioni particolari - Apparecchi per illuminazione stradale Luminaires - Part 2-5: Particular requirements - Floodlights. Apparecchi di illuminazione Parte 2: Prescrizioni particolari Sezione 5: Proiettori EN : A1:2011, IEC : A1:2011 Luminaires - Part 2-8: Particular requirements - Handlamps. Apparecchi di illuminazione Parte 2-8: Prescrizioni particolari - Apparecchi portatili EN :1998, EN :2015, IEC :1998, IEC :2015 EN :2013, IEC :2013 Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires. Apparecchi di illuminazione Parte 2: Prescrizioni particolari Sezione 4: Apparecchi di illuminazione mobili di uso generale EN :1997, IEC :1997 Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps. Apparecchi di illuminazione Parte 2: Prescrizioni particolari Sezione 6: Apparecchi di illuminazione con trasformatore incorporato per lampade a incandescenza

16 Scheda 16 di 22 EN : A1:1997, IEC : A1:1996 Luminaires. Part 2: Particular requirements. Section Seventeen - Luminaires for stage lighting, television and film studios (outdoor and indoor). Apparecchi di illuminazione Parte 2: Prescrizioni particolari Apparecchi per palcoscenici, studi televisivi e cinematografici EN : A2:1991, IEC : A1: A2:1990 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests. Apparecchi elettromedicali Parte 1: Prescrizioni generali per la sicurezza fondamentale e prestazioni essenziali - Norma collaterale: Compatibilità elettromagnetica - Prescrizioni e prove 4 General requirements - 5 Identification marking and documents - 6 electromagnetic compatibility Emissions Immunity. EN : 2007, EN :2015, IEC :2007, IEC :2014 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance. Apparecchi elettromedicali Parte 1: Norme generali per la sicurezza 4 General requirements, 5 General requirements for testing ME equipment, 6 Classification of ME eqipment and ME systems, 7 ME equipment identification, marking and documents, 8 Protection against electrical hazzard from ME equipment, 9 Protection against mechanical hazard of ME equipment and ME systems, 10 Protection against unwanted and excessive radiation HAZARDS, 11 Protection against excessive temperatures and other HAZARDS, 12 Accuracy of controls and instruments and protection against hazardous outputs, 13 HAZARDOUS SITUATIONS and fault conditions, 14 PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS), 15 Construction of ME EQUIPMENT, 16 ME SYSTEMS, Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures, Annex L Insulated winding wires for use without interleaved insulation. EN : A1: A12:2014, IEC : A1: A2:1995, IEC : A1:2012 Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment. Apparecchi elettromedicali Parte 2: Prescrizioni particolari relative alla sicurezza fondamentale e alle prestazioni essenziali degli apparecchi laser chirurgici, cosmetici, terapeutici e diagnostici General requirements, General requirements for testing ME EQUIPMENT, Classification of ME EQUIPMENT and ME SYSTEMS, ME EQUIPMENT identification, marking and documents, Protection against electrical HAZARDS from ME EQUIPMENT, Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS, Protection against unwanted and excessive radiation HAZARDS, Protection against excessive temperatures and other HAZARDS, Accuracy of controls and instruments and protection against hazardous outputs, HAZARDOUS SITUATIONS and fault conditions, PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS, Construction of ME EQUIPMENT EN :1996, EN :2013, IEC : A1:2012

17 Scheda 17 di 22 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use. Apparecchiature elettromedicali Parte 2: Prescrizioni particolari per la sicurezza fondamentale e le prestazioni essenziali delle apparecchiature con sorgente ottica non-laser destinate ad uso terapeutico, diagnostico, di monitoraggio e cosmetico/estetico General requirements, General requirements for testing ME EQUIPMENT, Classification of ME EQUIPMENT and ME SYSTEMS, ME EQUIPMENT identification, marking and documents, Protection against electrical HAZARDS from ME EQUIPMENT, Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS, Protection against unwanted and excessive radiation HAZARDS, Protection against excessive temperatures and other HAZARDS, Accuracy of controls and instruments and protection against hazardous outputs, HAZARDOUS SITUATIONS and fault conditions, PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS, Construction of ME EQUIPMENT, ME SYSTEMS EN :2011, IEC :2011 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment General requirements, General requirements for testing ME equipment, Classification of ME equipment and ME systems, ME equipment identification, marking and documents, Protection against electrical hazard from ME equipment, Protection against mechanical hazard of ME equipment and ME systems, Protection against unwanted and excessive radiation HAZARDS, Protection against excessive temperatures and other HAZARDS, Accuracy of controls and instruments and protection against hazardous outputs, HAZARDOUS SITUATIONS and fault conditions, PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS), Construction of ME EQUIPMENT, ME SYSTEMS. IEC :2012 Performance requirements of all electrical measuring relays and protection equipment. Relè di misura e dispositivi di protezione Parte 1: Prescrizioni generali Electrical relays - Part 6: Measuring relays and protection equipment EN :1994, EN :2010 Photobiological safety of lamps and lamp systems. Sicurezza fotobiologica delle lampade e dei sistemi di lampada Actinic UV exposure limit (irradiance ; nm), Actinic UV exposure limit (irradiance ; nm) Near-UV exposure limit (irradiance; nm), Near-UV exposure limit (irradiance; nm), Blue light hazard exposure limit (radiance; nm), Thermal hazard exposure limit (radiance; 380,1400nm), Thermal hazard exposure limit weak visual stimulus (radiance; nm), Blue light hazard exposure limit (radiance; nm), Thermal hazard exposure limit (radiance; 380,1400nm), Thermal hazard exposure limit weak visual stimulus (radiance; nm), Blue light hazard exposure limit (radiance; nm), Thermal hazard exposure limit (radiance; 380,1400nm), Thermal hazard exposure limit weak visual stimulus (radiance; nm), Blue light hazard exposure limit small source (irradiance, nm), Infrared hazard exposure eye (irradiance; nm), Thermal hazard exposure limit skin (irradiance; nm), B.1.1 Spectral radiance and spectral irradiance of UV, visible, IR, Alfa angle dimension, Time duration of pulse source, 6 Illuminance EN 62471:2008, IEC 62471:2006 Radio Equipment Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;part 1: Common technical requirements ETSI EN V1.9.2:2011

18 Scheda 18 di 22 Radio Equipment (Broadband Data Transmission Systems) Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment;part 17: Specific conditions for Broadband Data Transmission Systems Radio Equipment (DECT) Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment Radio Equipment (Fixed Radio Links) Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;part 4: Specific conditions for fixed radio links and ancillary equipment Radio Equipment (GSM and DCS) Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) Radio Equipment (Private Mobile Radio) Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) Radio Equipment (Short Range Device) Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 246 GHz ETSI EN V2.2.1:2012 ETSI EN V1.3.1:2008. ETSI EN V1.4.1:2015 ETSI EN V2.1.1:2012, ETSI EN V2,2,1:2015 ETSI EN V1.3.1:2005 ETSI EN V1.3.1:2002 ETSI EN V1.6.1:2013 Railway applications. Applicazioni ferroviarie, tranviarie, filoviarie e metropolitane Electromagnetic compatibility - Part 1: General. Compatibilità elettromagnetica Parte 1: Generalità EN :2006, EN :2015 Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus. Compatibilità elettromagnetica Parte 3-2: Materiale rotabile - Apparecchiature Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus. Compatibilità elettromagnetica Parte 4: Emissione ed immunità delle apparecchiature di segnalamento e telecomunicazioni Electronic equipment used on rolling stock. Equipaggiamenti elettronici utilizzati su materiale rotabile EN :2006, EN :2015 EN :2006, EN :2015 EN 50155:2007