PUBBLICAZIONI SCIENTIFICHE DEL DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE 1995-2005

PUBBLICAZIONI SCIENTIFICHE DEL DIPARTIMENTO DI ANALISI E PROGETTAZIONE STRUTTURALE 1995-2005 1 Riviste scientifiche internazionali ISI 118 internazionali non ISI 35 italiane 47 2 Volumi internazionali (autore) 8 3 Volumi nazionali (autore) 5 4 Volumi internazionali (curatore) 15 5 Volumi nazionali (curatore) 5 6 Capitoli di volumi/atti di convegno internazionali 587 7 Capitoli di volumi/atti di convegno nazionali 276 totale 1096 1. PUBBLICAZIONI SU RIVISTE SCIENTIFICHE Internazionali ISI (1995) 1 1. Clemente P, Occhiuzzi A, Raithel A, Limit behavior of stone arch bridges, ASCE Journal of Structural Engineering, Vol. 121, No. 7, July 1995, pp. 1045-1050 (1996) 4 2. Calderoni B, Ghersi A, Rinaldi Z, Statistical analysis of seismic behaviour of steel frames: Influence of overstrength, Journal of Constructional Steel Research, 39 (2): 137-161 SEP 1996 3. De Stefano M, Faella G, An evaluation of the inelastic response of systems under biaxial seismic excitations, Engineering Structures, 18 (9): 724-731 SEP 1996 4. Manfredi G., Pecce M., Behaviour of bond between concrete and steel in large postyielding field, Materials and Structures, n 192, Vol.29, October 1996. (ISSN: 0025-5432) 5. Ricciardelli F, Prediction of the response of suspension and cable-stayed bridge towers to wind loading, Journal of Wind Engineering & Industrial Aerodynamics, 64 (2-3): 145-159 NOV 15 1996 (1997) 9

6. Cosenza E., Manfredi G., Realfonzo R., Behaviour and modelling of bond of FRP Rebars to concrete, ASCE Journal of Composites for Construction, Vol.1, n 2, Maggio 1997. (ISSN: 1090-0268). 7. De Stefano M., Rutenberg A., A comparison of the present SEAOC/UBC torsional provisions with the old ones, Engineering Structures, Vol. 19, No 7, 655-664, 1997 8. Ferro G, Ostlid H, Mazzolani F, Soreide T, Nyhus K, Fiorentino A., Submerged floating tunnels analysis project, Tunnelling and Underground Space Technology, 12 (2): 337-346 APR 1997 9. Imbimbo M. Kelly J.M., Stability aspects of elastomeric isolators, Earthquake Spectra, Vol.13 n.3, 431-449, August 1997 10. Imbimbo M., Kelly J.M., Stability of isolators at large horizontal displacements, Earthquake Spectra, Vol.13 n.3, 415-430, August 1997. 11. Landolfo R, Mazzolani FM, Different approaches in the design of slender aluminium alloy sections, Thin-Walled Structures 27 (1): 85-102 JAN 12. Manfredi G., Pecce M., Low cycle fatigue of R.C. Beams in NSC and HSC, Engineering Structures, Vol.19, n 3, Marzo 1997. (ISSN: 0141-0296) 13. Mazzolani FM, Piluso V, Plastic design of seismic resistant steel frames, Earthquake Engineering and Structural Dynamics, 26 (2): 167-191 FEB 14. Mazzolani FM, Piluso V, Prediction of the rotation capacity of aluminium alloy beams, Thin-Walled Structures 27 (1): 103-116 JAN (1998) 6 15. De Matteis G. Landolfo R. Mazzolani F.M., Diaphragm Effect for Industrial Steel Buildings under Earthquake Loading., 2nd World Conference on Constructional Steel Design, San Sebastian, Spain, May 11-13 1998, in Journal of Constructional Steel Research, Elsevier, Vol. 46, Nos 1-3, pp. 357-358. 16. De Stefano M, Faella G, Ramasco R, Inelastic seismic response of one-way planasymmetric systems under bi-directional ground motions, Earthquake Engineering and Structural Dynamics (4): 363-376 APR 1998 17. Imbimbo M, De Luca A, FE stress analysis of rubber bearings under axial loads, Computers and Structures, 68 (1-3): 31-39 JUL-AUG 1998 18. Imbimbo M., Kelly J.M., Influence of Material Stiffening on Stability of Elastomeric Bearings at Large Displacements, ASCE Journal of Engineering Mechanics, Vol. 124, No. 9, September 1998, pp. 1045-1049 19. Manfredi G., Pecce M., A refined r.c. beam element including bond-slip relationship for the analisys of continuous beams, Computers and Structures, Vol.69, n 1, Luglio 1998. (ISSN: 0045-7949) 20. Ricciardelli F., Vickery B.J., The aerodynamic characteristics of twin column, high rise bridge towers Wind and Structures, n. 3 1998

(1999) 8 21. Castiglioni C., Imbimbo M., Experimental Results on Centrifugated GFRP Poles for Electric Lifelines,, ASCE Journal of Composites for Construction, Vol. 3, No. 3, August 1999, pp. 125-133 22. De Matteis G, Landolfo R, Mechanical fasteners for cladding sandwich panels: Interpretative models for shear behaviour, Thin-Walled Structures 35 (1): 61-79 SEP 1999. 23. De Matteis G, Landolfo R, Structural behaviour of sandwich panel shear walls: An experimental analysis, Materials and Structures, 32 (219): 331-341 JUN 1999 24. Fabbrocino G., Manfredi G., Cosenza E., Nonlinear analysis of composite beams under positive bending, Computers and Structures, Vol.70, n 1, January 1999. (ISSN: 0045-7949). 25. Manfredi G., Fabbrocino G., Cosenza E., Modelling of steel-concrete composite beams under negative bending, ASCE Journal of Engineering Mechanics, Vol. 125, n.6, Giugno 1999. (ISSN: 0733-9399). 26. Moen L. A., De Matteis G., Hopperstad O.S., Langseth M., Landolfo R., Mazzolani F.M., Rotational Capacity of Aluminium Beams Subjected to Non-Uniform Bending - Part II: Numerical Simulations, ASCE Journal of Structural Engineering, 125 (8), 1999, 921-929. 27. Pecce M., Fabbrocino G., Plastic Rotation Capacity of Beams in Normal and High- Performance Concrete, ACI Structural Journal, n.2; vol. 96, pp 290, 296, March 1999. 28. Ricciardelli F, Vickery BJ, Tuned vibration absorbers with dry friction damping, Earthquake Engineering and Structural Dynamics, 28 (7): 707-723 JUL 1999 (2000) 11 29. Calado L., De Matteis G., Landolfo R., Experimental response of top and seat angle semi-rigid steel frame connections, Materials and Structures, RILEM, ISSN 1359-5997, Cachan (France), October 2000, Vol. 33, pp 499-510. 30. Clemente P, Nicolosi G, Raithel A; Preliminary design of very long-span suspension bridges; Engineering Structures; 22 (12): 1699-1706 DEC 2000 31. De Matteis G., Landolfo R., Diaphragm Action of Sandwich Panels in Pin-Jointed Steel Structures: a Seismic Study, Journal of Earthquake Engineering, Imperial College Press, London, Vol. 4, No. 3, 251-275. 32. De Matteis G., Landolfo R., Modelling of Lightweight Shear Diaphragms for Dynamic Analysis, Journal of Constructional Steel Research, Elsevier, ISSN 0143-974X, Oxford (UK), 2000, Vol. 53, pp 33-61. 33. De Matteis G., Mandara A., Mazzolani F.M., T-stub Aluminium Joints: the Influence of Behavioural Parameters, Computers and Structures, Elsevier, Nov. 2000, ISSN 0045-7949, Oxford (UK), Vol. 78, No. 1-3, 311-327.

34. Fabbrocino G., Manfredi G., Cosenza E., Analysis of continuous composite beams including partial interaction and bond, ASCE Journal of Structural Engineering, Vol. 126, n.11, November 2000. (ISSN: 0733-9445) 35. Faella C, Mazzolani FM, Piluso V, Rizzano G, Local buckling of aluminum members: Testing and classification, ASCE Journal of Structural Engineering, 126 (3): 353-360 MAR 2000 36. Pecce M, Cosenza E, Local buckling curves for the design of FRP profiles, Thin- Walled Structures, 37 (3): 207-222 July 2000 37. Pecce M. Manfredi G., Cosenza E., Experimental response an code models of GFRP r.c. beams in ultimate and serviceability conditions, ASCE Journal of Composites for Construction,Vol.4, n 4, November 2000. (ISSN: 1090-0268) 38. Raithel A, Ricciarelli F., Influence of the coupling of two box decks; Engineering Structures; 22 (5): 502-512 MAY 2000. 39. Ricciardelli R., Occhiuzzi A., Clemente P., Semi-active tuned mass damper control strategy for wind excited structures, Journal of Wind Engineering & Industrial Aerodynamics, Elsevier, Vol. 88, No. 1, 57-74. (2001) 8 40. Cosenza E., Pecce M., Shear and normal stresses interaction in coupled structural systems. Journal of Structural Engineering-ASCE. vol. 127, pp. 84-88 ISSN: 07339445/01/001. 41. De Luca A., Mele E., Molina J., Verzeletti G., Pinto A. V., Base isolation for retrofitting historic buildings: evaluation of seismic performance through experimental investigation, Earthquake Engineering and Structural Dynamics, Volume 30, Issue 8, pp. 1125-1145, John Wiley & Sons. 42. De Matteis G., Moen L.A., Langseth M., Landolfo R., Hopperstad O.S., Mazzolani F.M. Cross-Sectional Classification for aluminium beams: a parametric study, Journal of Structural Engineering, ASCE, ISSN 0733-9445, Reston-VA (USA), March 2001, Vol. 127 (3), pp 271-279. 43. Fabbrocino G., Manfredi G., Cosenza E., Ductility of composite beams under negative bending: an equivalence index for reinforcing steel classification, Journal of Constructional Steel Research, Vol.57, n.2, February 2001. (ISSN: 0143-974X). 44. Manfredi G., Evaluation of Seismic Energy Demand, Earthquake Engineering and Structural Dynamics, Vol.30, n.4, Aprile 2001. (ISSN: 0025-5432) 45. Mazzolani FM, EN1999 Eurocode 9: Design of aluminium structures, Proceedings of the Institution of Civil Engineers Civil Engineers, 144: 61-64 Sp. Iss. 2 Nov 2001. 46. Mele, E., Calado, L., De Luca, A., Cyclic behaviour of beam-to-column welded connections. Steel and Composite Structures, Vol.1. No.3., September, Techno-Press.

47. Pecce M., Manfredi G., Realfonzo R., Cosenza E., Experimental and Analytical Evaluation of Bond Properties of GFRP Rebars, Journal of Materials in Civil Engineering, ASCE, Vol.13, No.4, July/August, 2001. (2002) 22 48. Arduini, M., A. Nanni, and M. Romagnolo, Performance of Decommissioned RC Girders Strengthened with FRP Laminates, ACI Structures Journal, Sept.-Oct. 2002 Vol. 99, No. 5, pp 652-659. 49. Bakis C., Bank L.C., Brown V., Cosenza E., Davalos J.F., Lesko J., Machida A., Rizkalla S.H., Triantafillou T.C., FRP Composites for Construction, State-of-the-Art Review, ASCE Journal of Composite for Construction, May 2002. 50. Calderoni B. D Aveni A. Ghersi A. Rinaldi Z. Static vs. modal analysis of asymmetric buildings: effectiveness of dynamic eccentricity formulations Earthquake Spectra Vol.18, No.2, pag.219-231 51. Calderoni B. Rinaldi Z. Seismic performance evaluation for steel MRF: non linear Dynamic and static analyses Steel & Composite Structures Vol.2, No.2, pag.113-128, 52. Cosenza E., Manfredi G., Realfonzo R. Development Length of FRP Straight Rebars, Composites Part B: Engineering, Elsevier, (ISSN: 1359-8368). Vol. 33, n 7, October 2002 pp. 493-504 53. Cosenza E., Manfredi G., Verderame G., A new strategy for the seismic assessment of existing RC buildings, Annals of Geophysics, Vol.45, n 6, Dicembre 2002 (ISSN: 0365-2556). 54. Cosenza, E., Manfredi, G., Verderame, G.M., Seismic assessment of gravity load designed r.c. frames: critical issues in structural modelling, Journal of Earthquake Engineering. Vol. 6, n.2, April 2002. (ISSN: 1363-2469). 55. Cosenza, E., Manfredi, Research Needs and Unresolved Issues of Composites for Built Infrastructure, ASCE Journal of Composites for Construction, Vol.6, n 3, August 2002, pp. 135-146. 56. De Lorenzis, and A. Nanni, Bond Between Near Surface Mounted FRP Rods and Concrete in Structural Strengthening, ACI Structures Journal, Vol. 99, No. 2, March-April 2002,pp. 123-133. 57. Della Corte G., De Matteis G., Landolfo R., Mazzolani F.M. Seismic analysis of MR steel frames based on refined hysteretic models of connections. Journal of Constructional Steel Research. 58: 1331-1345 58. Fabbrocino G., Manfredi G., Cosenza E., Modelling of continuous steel-concrete composite beams: computational aspects, Computer and Structures, Vol.80, n 27-30, Novembre 2002. (ISSN: 0045-7949). 59. Faella C., E. Martinelli, E. Nigro, Steel and concrete composite beams with flexible shear connection: exact analytical expression of the stiffness matrix and applications, Computer and Structures. Vol. 80, pp. 1001-1009

60. Giordano, A., Mele, E., De Luca, A. Modelling of historical masonry structures: comparison of different approaches through a case study. Engineering Structures, Vol. 24, No.8, pp. 1057-1069 61. Khalifa, A. and A. Nanni, Rehabilitation of Rectangular Simply Supported RC Beams with Shear Deficiencies Using CFRP Composites, Construction and Building Materials, Vol. 16, No. 3, 2002, 62. Mazzolani F.M., Mandara A., Modern trends in the use of special metals for the improvement of historical and monumental structures, Engineering Structures Elsevier, 24: 843-856 63. Mele, E., Moment resisting welded connections: an extensive review of design practice and experimental research in USA, Japan and Europe, Journal of Earthquake Engineering, Vol.6, No.1 pp. 1-35 64. Micelli, F., R. Annaiah, and A. Nanni, Strengthening of Short Shear Span RC-T Joist with FRP Composites, ASCE Journal for Composites in Construction, Nov. 2002, Vol. 6, No. 4, pp. 264-271. 65. Nanni, A., and P.C. Huang, Validation of an Alternative Reinforcing Detail for the Dapped Ends Design of Prestressed Double Tees PCI Journal, Vol. 47, No. 1, Jan.-Feb 2002, 66. Shen, Y., M. Xu, K. Chandrashekhara and A. Nanni Finite Element Analysis of FRP Tube Assemblies for Bridge Decks, Advanced Composite Materials, Japan, Nov. 2002, Vol. 11, No. 2, pp. 151-169. 67. Vatovec, M., P.L. Kelley, T. Alkhrdaji, and A. Nanni, Evaluation of CFRP Strengthening of Existing Garage: Case Study, ASCE Journal for Composites in Construction, Aug. 2002, Vol. 6, No. 3, pp. 184-193. 68. Yang, X, A. Nanni, S. Haug, and C.L. Sun, Strength and Modulus Degradation of CFRP Laminates from Fiber Misalignment ASCE Journal of Materials in Civil Engineering, July-Aug. 2002, Vol. 14, No. 4, pp. 320-326. 69. Yang, X., and A. Nanni, Lap Splice Length and Fatigue Performance of FRP Laminates, ACI Materials Journal, Vol. 99, No. 4, July-Aug. 2002, pp. 386-392. (2003) 18 70. Como M., De Stefano M., Ramasco R., Effects of column axial force - bending moment interaction on inelastic seismic response of steel frames, Earthquake Engineering & Structural Dynamics, Vol. 32, 2003, pp. 1833-1852. 71. De Matteis G., Landolfo R., Mazzolani F.M., Seismic response of MR steel frames with low-yield steel shear panels, Engineering Structures - The Journal of Earthquake Wind and Ocean Engineering, n. 25, 2003, pp. 155-168. 72. Della Corte G., Landolfo R., Mazzolani F.M., Post-earthquake fire resistance of moment resisting steel frames, Fire Safety Journal, n. 38, 2003, pp. 593-612. 73. Di Sarno L, Elnashai AS, Nethercot DA, Seismic performance assessment of stainless steel frames, Journal of Constructional Steel Research, Vol. 59 No. 10, pp 1289-1319

74. Faella C., Martinelli E., Nigro E., Shear Connection Non Linearity and Deflections of Steel-Concrete Composite Beams: a Simplified Method, ASCE Journal of Structural Engineering 75. Kumar, P., K. Chandrashekhara, and A. Nanni, Testing and Evaluation of Components for a Composite Bridge Deck, Journal of Reinforced Plastics and Composites, Vol. 22, No. 5, 2003, pp. 441-461. 76. Manfredi G., Polese M., Cosenza E., Cumulative demand of the earthquake ground motion in the near source, Earthquake Engineering and Structural Dynamics, Vol. 32, n. 12, October 2003 (ISSN: 0025-5432), pp. 1853-1865. 77. Mazzolani F.M., Steel and Composite Structures in European Seismic Areas: Research, Codification, Design and Applications, Earthquake Spectra, Vol. 19, n. 2, May 2003, pp. 415-452. 78. Mele E., Calado L., De Luca A., Experimental investigation on European welded connections, ASCE Journal of Structural Engineering, Vol. 129, Issue 10. 79. Mele E., De Luca A., Giordano A., Modelling and analysis of a basilica type building under seismic actions, Journal of Cultural Heritage, Elsevier, n. 4, pp. 355 367. 80. Micelli, F. and A. Nanni, Tensile Characterization of FRP Rods for Reinforcement of Concrete Structures, Mechanics of Composite Materials Journal, Vol. 39, No.4, 2003, pp. 293-304. 81. Nanni, A., North American Design Guidelines for Concrete Reinforcement and Strengthening using FRP: Principles, Applications, and Unresolved Issues, Construction and Building Materials, Vol. 17, No. 6-7, Sept.-Oct. 2003, pp. 439-446. 82. Occhiuzzi A., Spizzuoco M., Serino G., Experimental analysis of magnetorheological dampers for structural control, Smart Materials and Structures, Vol. 12, n. 5, 2003, pp. 703-711. 83. Palmeri A, Ricciardelli F, De Luca A, et al., State space formulation for linear viscoelastic dynamic systems with memory, ASCE Journal of Engineering Mechanics 129 (7): 715-724 JUL 2003 84. Prota A., Nanni A., Manfredi G., Cosenza E., Capacity Assessment of RC Subassemblages Upgraded with CFRP, Journal of Reinforced Plastics and Composites, Vol. 22, n. 14, 2003, pp. 1287-1304. 85. Salzano, E., Iervolino, I., Fabbrocino G, Seismic Risk of Atmospheric Storage Tanks in the Framework of Quantitative Risk Analysis, Journal of Loss Prevention in the Process Industries, Vol. 16, pp. 403-409. 86. Tumialan, G.J., N. Galati and A. Nanni, FRP Strengthening of URM Walls Subject to Out-of-Plane Loads, ACI Structures Journal, May-June 2003, Vol. 100, No.3, pp. 321-329. 87. Tumialan, G.J., N. Galati, and A. Nanni, Field Assessment of URM Walls Strengthened with FRP Laminates, Journal of Structural Engineering - ASCE, August 2003, Vol. 129, No. 8, pp.1047-1056.

(2004) 18 88. Akuthota, B., D. Hughes, R. Zoughi, J. Myers and A. Nanni, Near-Field Microwave Detection of Disbond in FRP Composites Used for Strengthening Concrete Structures and Disbond Repair Verification, ASCE Journal of Materials in Civil Engineering, Nov.-Dec. 2004, Vol. 16, No. 6, pp. 540-546. 89. Arduini, M., A. Nanni, and M. Romagnolo, Performance of One-Way Reinforced Concrete Slabs with Externally-Bonded FRP Strengthening, ACI Structures Journal, Vol. 101, No. 2, March-April 2004, pp. 193-201. 90. Augenti N., Cosenza E., Dolce M., Manfredi G., Masi A., Samela L., Performance of School Buildings during the Molise Earthquake Sequence of October 31-November 1, 2002, Earthquake Spectra, Vol. 20, Issue S1, July 2004. (ISSN: 8755-2930). 91. De Luca A, Giordano A, Mele E, A simplified procedure for assessing the seismic capacity of masonry arches, Engineering Structures 26 (13): 1915-1929 November 2004 92. De Matteis G, Landolfo R, Manganiello M, Mazzolani FM, Inelastic behaviour of I- shaped aluminium beams: numerical analysis and cross-sectional classification, Computers and Structures, 82 (23-26): 2157-2171 September 2004. 93. Fabbrocino G., Verderame G., Manfredi G., Cosenza E., Structural models of critical regions in old-type r.c. frames with smooth rebars, Engineering Structures, Vol. 26, n.14, December 2004. (ISSN: 0141-0296). 94. Festa G., Zollo A., Manfredi G., Polese M., Cosenza E., Simulation of the Earthquake Ground Motion and Effects on Engineering Structures During the Preeruptive Phase of an Active Volcano, Bulletin of the Seismological Society of America, Vol. 94, N 6, December 2004. (ISSN: 0037-1106). 95. Iervolino I., Fabbrocino G., Manfredi G., Fragility of standard industrial structures by a response surface based method, Journal of Earthquake Engineering, Vol. 8, n.6, November 2004 (ISSN: 1363-2469). 96. Kumar, P., K. Chandrashekhara, and A. Nanni, Structural Performance of FRP Bridge Deck, Construction & Building Materials, Vol. 18, No. 1, February 2004, pp. 35-47. 97. Mele E, Di Sarno L, De Luca A, Seismic behaviour of perimeter and spatial steel frames Journal of Earthquake Engineering 8 (3): 457-496 May 2004 98. Micelli F, Nanni A, Durability of FRP rods for concrete structures, Construction & Building Materials 18 (7): 491-503 September 2004 99. Nanni, A., M. Di Ludovico, and R. Parretti, Shear Strengthening of a PC Bridge with NSM CFRP Rectangular Bars, Advances in Structural Engineering, Vol. 7, No. 4, 2004, pp. 97-109. 100. Palmeri A, Ricciardelli F, Muscolino G, De Luca A Effects of viscoelastic memory on the buffeting response of tall buildings, Journal of Wind Engineering & Industrial Aerodynamics, 7 (2): 89-106 March 2004 101. Palmeri A, Ricciardelli F, Muscolino G, De Luca A, Random vibration of systems with viscoelastic memory, ASCE Journal of Engineering Mechanics, 130 (9): 1052-1061 September 2004

102. Parretti, R. and A. Nanni, Strengthening of RC Members Using Near-Surface Mounted FRP Composites: Design Overview, Advances in Structural Engineering, Vol. 7, No. 6, 2004, pp. 469-483. 103. Prota, A., Nanni, A., Manfredi, G., Cosenza, E., Selective Upgrade of Underdesigned Reinforced Concrete Beam-Column Joints Using Carbon Fiber- Reinforced Polymers, ACI Structural Journal, Vol.101. Issue 5, 699-707 Sept- Oct 2004. (ISSN: 0889-3241). 104. Yang, X., J. Wei, A. Nanni, and L.R. Dharani, Shape Effect on the Performance of Carbon FRP Wraps, ASCE Journal of Composites for Construction, Sept.- Oct. 2004, Vol. 8, No. 5, pp. 444-451. 105. Yu, P., P. Silva, and A. Nanni, Innovative Mechanical Device for the Post- Tensioning of FRP Bars for Masonry Type Retrofit Applications, Society for Experimental Mechanics, Experimental Mechanics Journal, Vol. 44, No. 3, 2004, pp. 272-277. (2005) 13 106. Balsamo A., Colombo A., Manfredi G., Negro P., Prota A., Seismic Behavior of a Full-scale RC Frame Repaired using CFRP Laminates, Engineering Structures. Vol 27, n.5, pp 769-780 (ISSN: 0141-0296) 107. Barton, B., E. Wobbe, L. R. Dharani, P. Silva, V. Birman, A. Nanni, T. Alkhrdaji, J. Thomas, and G. Tunis, Characterization of RC Beams Strengthened by Steel Reinforced Polymer and Grout (SRP & SRG) Composites, Materials Science and Engineering A Structural Materials Properties Microstructure and Processing 412 (1-2): 129-136 Sp. Iss. SI, DEC 5 2005 108. Casadei P, Nanni A, Alkhrdaji T, Thomas J, Performance of double-t prestressed concrete beams strengthened with steel reinforcement polymer, Advances in Structural Engineering 8 (4): 427-442 AUG 2005 109. Cosenza E., Manfredi G., Polese M., Verderame G., A Multilevel Approach to the Capacity Assessment of Existing RC Buildings, Journal of Earthquake Engineering, Vol. 9, n.1, January 2005. (ISSN: 1363-2469) 110. Di Ludovico M., Nanni A., Prota A., Cosenza E., Repair of Bridge Girders with Composites: Experimental and Analytical Validation, ACI Structural Journal 102 (5): 639-648 SEP-OCT 2005. 111. Eshwar N, Ibell TJ, Nanni A, Effectiveness of CFRP strengthening on curved soffit RC beams, Advances in Structural Engineering 8 (1): 55-68 FEB 2005. 112. Fabbrocino G, Iervolino I, Orlando F, Salzano E, Quantitative risk analysis of oil storage facilities in seismic areas, Journal of Hazardous Materials Vol. 123, n.1-3, August 2005. 113. Fabbrocino G., Verderame G.M., Manfredi G., Experimental Behaviour of Anchored Smooth Bars in Old Type R.C. Buildings, Engineering Structures. Vol. 27, n.9, August 2005 (ISSN: 0141-0296)

114. Huang X, Birman V, Nanni A, et al., Properties and potential for application of steel reinforced polymer and steel reinforced grout composites, Composites Part B-Engineering 36 (1): 73-82 2005 115. Iervolino I., Cornell C. A., Record Selection for Nonlinear Seismic Analysis of Structures, Earthquake Spectra, Volume 21, Issue 3, pp. 617-899, August 2005. 116. Kocaoz S, Samaranayake VA, Nanni A, Tensile characterization of glass FRP bars, Composites Part B-Engineering 36 (2): 127-134 2005. 117. Li T, Galati N, Tumialan JG, et al., Analysis of unreinforced masonry concrete walls strengthened with glass fiber-reinforced polymer bars, ACI Structural Journal 102 (4): 569-577 JUL-AUG 2005. 118. Liu XD, Nanni A, Silva PF, Rehabilitation of compression steel members using FRP pipes filled with non-expansive and expansive light-weight concrete, Advances in Structural Engineering 8 (2): 129-142 APR 2005. Internazionali non-isi (1995) 1 119. De Matteis G., Landolfo R., Mazzolani F.M., On the Shear Flexibility of Corrugated Steel Panels, Journal of Singapore Structural Steel Society, Vol.6, N.1. (1998) 4 120. Cosenza E., Greco C., Manfredi G., An Equivalent Steel Index in the Assessment of the Ductility Performances of the Reinforcement, CEB Bullettin n 242 "Ductility of Reinforced Concrete Structures", May 1998. 121. Eligehausen R. (Edt.), Alvarez M., BigaJ A., Cosenza E., Manfredi G., Mayer U., Sigrist V., Walraven J., Ductility of Reinforced Concrete Structures, Synthesis Report, CEB Bulletin n 242, May 1998. 122. Manfredi G., Evaluation of the Rotation Capacity in R.C. Beams including Size Effect, CEB Bullettin n 242 "Ductility of Reinforced Concrete Structures", May 1998. 123. Pecce M.: Experimental Evaluation of Rotation Capacity of HPC Beams ; CEB Bullettin n 242 "Ductility of Reinforced Concrete Structures", May 1998 (1999) 3 124. De Matteis G., Mazzolani F.M., Landolfo R., Milev J., "Q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches" in Acta Polytechnica, Journal of Czech Technical University, Vol. 39, No. 5, 1999.

125. Fabbrocino G, Manfredi G., Cosenza E., Influence of the ductility of reinforcement on the non-linear behaviour of continuous composite beams, Acta Polytechnica A Journal of Czech Technical University, No. 5, 1999, ISSN 1210-2709. 126. Mazzolani F.M., Fiabilidad de las Esctructuras de Acero en Areas Sismicas. LABEIN - Boletin de Tecnologia e Innovacion, N. 30 Octobre 1999 (2000) 2 127. Calado, L.; Mele, E., Cyclic tests on bolted and welded beam-to-column connections. Special Issue "Experimental Techniques", Journal of Earthquake Technology. Ed. V.K. Gupta, Guest Editor H. Krawinkler, vol. 37, issue 4, pp. 65-88. 128. Cosenza E., Manfredi G., Damage Index and Damage Measures, Progress in Structural Engineering and Materials, Vol.2, N 1, pp. 50-59, January/March. (ISSN: 1365-0556). (2001) 2 129. Calderoni B., De Martino A., Serviceability and stress control in seismic design of steel structures, European Earthquake Engineering n.1/2001, PATRON editore, Bologna. 130. Mazzolani F.M., Passive control technologies for seismic-resistant buildings in Europe, Progress in Structural Engineering and Materials, Vol.3, N 3, pp. 277-287, July/September. (ISSN: 1365-0556). (2002) 3 131. Nanni, A. and S. Faza, Design and Construction of Concrete Reinforced with FRP Bars: An Emerging technology, Concrete International Design and Construction, Nov. 2002, Vol. 24, No. 11, pp. 53-58. 132. Nanni, A., and G.J. Tumialan, Reforzamiento de Puentes con Materiales Compuestos (FRP), El Ingeniero Civil, No. 125, Oct.-Nov. 2002, pp. 14-20. 133. Schiebel, S., R. Parretti, A. Nanni, and M. Huck, Strengthening and Load Testing of Three Bridges in Boone County, MO ASCE Practice Periodical on Structural Design and Construction, Nov. 2002, Vol. 7, No. 4, pp 156-163. (2003) 9 134. Arduini, M, A. Nanni, and R. Parretti, Diagnostic Load Testing of Existing Structures in Italy: Validation of Adequate Safety, Concrete International: Design & Construction, Dec. 2003, Vol. 25, No. 12, pp. 69-75. 135. Casadei, P., A. Nanni, In-Situ Load Testing of Reinforced Concrete Structures," Concrete Technology Today, Singapore, Vol. 3, Sept.-Dec. 2003, pp. 10-16.

136. Di Sarno L., Elnashai A., Special metals for seismic retrofitting of steel buildings, Progress in Structural Engineering and Materials, Vol.5, N 2, pp. 60-76, April/June. (ISSN: 1365-0556) 137. Nagano, Y., M. Uozumi, H. Takeuchi and A. Nanni, Centrifugal Shotcrete for Foundation Construction, Concrete International: Design & Construction, Sept. 2003, Vol. 25, No.9, pp. 43-48. 138. Nanni, A., Tumialan G., Fiber Reinforced Composites for the Strengthening of Masonry Structures, Structural Engineering International, IABSE, Zurich, Switzerland, SEI Vol. 13, No. 4, Nov. 2003, pp. 271-278. 139. Nystrom, H., S.E. Watkins, A. Nanni, and S. Murray, Financial Viability of Fiber- Reinforced Polymer (FRP) Bridges, ASCE Journal of Management in Engineering, Jan. 2003, Vol. 19, No. 1, pp. 2-8. 140. Occhiuzzi A., Serino G., A semi-active oleodynamic damper for earthquake control - Part 2: Evaluation of performance through shaking table tests, Bulletin of Earthquake Engineering, Vol. 1, n. 2, 275-302. 141. Serino G., Occhiuzzi A., A semi-active oleodynamic damper for earthquake control - Part 1: Design, manufacturing and experimental analysis of the device, Bulletin of Earthquake Engineering, Vol. 1, n. 2, pp. 241-273. 142. Tumialan, G, and A. Nanni, Strengthening masonry Walls, Masonry Construction, Vol. 16, No. 4, April 2003, pp. 28-32. (2004) 6 143. Calderoni B., Lenza P., Rossi P.P., Pushover Tests on Intermediate-Scale Models of Masonry Buildings with Rigid Floor, The Masonry Society Journal, Vol 22 N 1, September 2004. 144. Faggiano B., De Matteis G., Landolfo R., Mazzolani F.M. 2004. Behaviour of aluminium alloy structures under fire, Journal of Civil Engineering and Management (JCEM), Vol. X, N. 3, pp.183-190, published by Vilnius Gediminas Technical University, Lithuania. 145. Mazzolani, F.M., Competing issues for aluminium alloys in structural engineering, Progress in Structural Engineering and Materials, Vol.6, N 4, pp. 185-196, October/December. (ISSN: 1365-0556) 146. Nanni, A., Strengthening of Impact-Damaged PC Girder, Concrete Repair Bulletin, Vol. 17, No. 3, May/June 2004, pp. 16-20. 147. Renzi E., Serino G., Testing and modelling a semi-actively controlled steel frame structure equipped with MR dampers, Structural Control and Health Monitoring, Volume 11, Issue 3, (p 189-221) (July/September 2004) 148. Takeuchi, H., S. Taketomi, S. Samukawa, and A. Nanni, Renovation of a Concrete Water Tank in Chiba Prefecture, Japan ASCE Practice Periodical on Structural Design and Construction, Vol. 9, No. 4, Nov. 2004, pp. 237-241. (2005) 5

149. Casadei, P., R. Parretti, A. Nanni, and T. Heinze, In Situ Load Testing of Parking Garage Reinforced Concrete Slabs: Comparison between 24 h and Cyclic Load Testing, ASCE Practice Periodical on Structural Design and Construction, Vol. 10, No. 1, Feb. 2005, pp. 40-48. 150. Ekenel, M., N. Galati, J. J. Myers, A. Nanni, and V. Godinez, Acousto-Ultrasonic Technology for Non-Destructive Evaluation of Concrete Bridge Members Strengthened by CFRP, Transportation Research Record, RCD11, December 2005, pp. 245-25. 151. Li, T., N. Galati, J.G., Tumialan, and A. Nanni, FRP Strengthening of URM Walls with Openings - Experimental Results, The Masonry Society Journal, Vol. 23, No. 1, December 2005, pp. 47-57. 152. Li, T., N. Galati, J.G., Tumialan, and A. Nanni, FRP Strengthening of URM Walls with Openings - Numerical Analysis and Design, The Masonry Society Journal, Vol. 23, No. 1, December 2005, pp. 59-72. 153. Occhiuzzi A. Spizzuoco M., Experimental analysis of a semi-actively controlled steel building, Structural Engineering and Mechanics, vol. 19, n. 6, ISSN 1225-4568, 2005. Nazionali (1995) 3 154. Cosenza E., L'Eurocodice 4 sulle costruzioni composte, acciaio-calcestruzzo, U&C, UNI, n.9, Ottobre. 155. Landolfo R., Mazzolani F.M., Flexural behaviour of trapezoidal steel sheeting: experimental analysis, Costruzioni Metalliche, n.1. 156. Piluso V., Mazzolani F.M., Failure modes and ductility control of seismic resistant MR-frames, Costruzioni Metalliche, n.2. (1996) 3 157. Calderoni B. Ghersi A., Rinaldi Z., Analisi statistica della risposta dinamica di telai in acciaio: influenza della sovraresistenza, Costruzioni Metalliche n.5 Settembre-Ottobre 1996, Editore ACS-ACAI Servizi Srl, Milano 158. Cosenza E., Manfredi G., Realfonzo R., Bond of FRP rebars to concrete: experimental behaviour and analytical models, Costruzioni in Cemento Armato - Studi e Ricerche, nø17, Giugno 1996 159. Fabbrocino G., Pecce M., Alcune osservazioni sulla modellazione normativa del legame costitutivo per il calcestruzzo ad alta resistenza", Rivista AICAP nø3 allegata all'industria Italiana del Cemento, marzo 1996. (1998) 1

160. Cosenza E., Fabbrocino G., Manfredi G., Capacità rotazionale di travi composte acciaio-calcestruzzo: influenza delle proprietà dell'acciaio per armatura, Costruzioni Metalliche, n 6, Novembre 1998 (1999) 4 161. Calderoni B., De Martino A., Landolfo R., Comportamento sismico di telai in profili sottili: l influenza dei limiti di servizio e definizione del fattore di struttura - Costruzioni Metalliche, n.2 - Mar.-Apr.1999, Ed. ACS-ACAI Servizi Srl, Milano. 162. Calderoni B., Neri F., Rinaldi Z., La distribuzione delle resistenze per l ottimizzazione del comportamento ultimo di telai in acciaio - Costruzioni Metalliche, n.3 - Maggio-Giugno 1999, Editore ACS-ACAI Servizi Srl, Milano. 163. De Matteis G., Landolfo R., Mazzolani F. M., L'Effetto Collaborante dei Pannelli di Chiusura negli Edifici a Struttura d Acciaio soggetti ad Azioni Sismiche, Costruzioni Metalliche, n. 4, 1999, 63-74 164. Mazzolani F.M., Il ponte "Real Ferdinando" sul Garigliano, Restauro n. 146/1998 (2000) 4 165. Calderoni B., De Martino A. Il controllo del livello pensionale nello stato limite di servizio per strutture in acciaio in zona sismica, Ingegneria sismica, anno XVII, n.2/2000 PATRON editore, Bologna. 166. Calderoni B., Lenza P., Rossi P.P. Prescrizioni normative e sicurezza sismica, Ingegneria sismica, anno XVII, n.2/2000, PATRON editore, Bologna. 167. De Matteis G., Mandara A., Marano L. "Analisi agli elementi finiti del comportamento di giunti T-stub in alluminio", Costruzioni Metalliche, n. 1, 2000, 55-65. 168. Prota A., Nanni A., Manfredi G., Cosenza E., Rinforzo Sismico di Nodi Trave- Colonna con Materiali Compositi, L Industria Italiana del Cemento, n 12, Dicembre 2000. (2001) 1 169. Lenza P., Menzione G. La concezione strutturale del XIX secolo nelle opere murarie della Costiera Amalfitana, Edilizia, Numeri 2-3/2001 (2002) 3 170. Casareto, M., A. Oliveri, A. Romelli, A. Nanni, and S. Lagomarsino, Barre Termoplastiche in FRP: L Utilizzo Interventi di Riabilitazione Strutturale,, L Edilizia: Building and Construction for Engineers, Milan, Italy, Vol. XVI, No. 2, Feb./March/April 2002, pp. 54-60.

171. Cosenza E., Fabbrocino G., Iervolino I., Lando M.: Preventivazione sintetica del costo di edifici industriali prefabbricati, Impiantistica Italiana, n 1 Gennaio-Febbraio 2002. 172. Landolfo, R., Di Lorenzo, G, Fiorino, L. Attualità e prospettive dei sistemi costruttivi cold-formed, Costruzioni metalliche No.1/2002 (2003) 10 173. Augenti N., Crolli e Grandi Dissesti, L Edilizia: Building and Construction for Engineers, Milano, Italia, n 129, Ottobre 2003. 174. Cosenza E., Fabbrocino G., Tecnologie e materiali innovativi per la salvaguardia dei beni architettonici, storici ed archeologici, L Edilizia: Building and Construction for Engineers, Milano, Italia, n 127, Giugno 2003, pp. 18-23. 175. Cosenza E., Fabbrocino G., Tecnologie e materiali innovativi per la salvaguardia dei beni architettonici, storici ed archeologici, Recupero e Conservazione, Luglio-Agosto 2003, pp. 92-97. 176. Lenza P., Quaglia S., La valutazione del coefficiente di struttura nelle costruzioni in muratura, Ingegneria sismica, Anno XX, n.1. 177. Manfredi G., Fabbrocino G., Monitoraggio Strutturale e Sicurezza degli Edifici, L Edilizia: Building and Construction for Engineers, Milano, Italia, n 129, Ottobre 2003. 178. Manfredi G., Prota A., Pecce M., Balsamo A., L'uso dei Compositi nel Rinforzo Sismico delle Strutture in Cemento Armato, L Edilizia: Building and Construction for Engineers, Milano, Italia, n 127, Giugno 2003, pp. 50-55. 179. Nanni, A., R. Parretti, and A. Prota, Il Rinforzo con Materiali Compositi di Travi da Ponte Accidentalmente Danneggiate: Esperienze Americane, ENCO Journal, Vol. VIII, No. 24, Oct. 2003, pp. 7-9. 180. Parretti, R. and A. Nanni, Tre Ponti nel Missouri. Rinforzo e Prove di Carico, L Edilizia: Building and Construction for Engineers, Milano, Italia, March- April-May 2003, Vol. XVII, No. 127, pp. 56-61 181. Prota, A., R. Parretti, and A. Nanni, Upgrade of RC Silos Using Near Surface Mounted FRP Composites,, Industria Italiana del Cemento, Feb. 2003, Vol. LXXIII, No. 784, pp. 170-183. 182. Tumialan, G., F. Micelli, and A. Nanni, L Adeguamento di Strutture Murarie. Il Malcolm Bliss Hospital, Saint Louis, Missouri, L Edilizia: Building and Construction for Engineers, Milano, Italia, March-April-May 2003, Vol. XVII, No. 127, pp. 62-65. (2004) 5 183. Cosenza E., Calvi G.M., Le nuove norme antisismiche italiane: breve storia di una profonda innovazione tecnica e tecnologica, Il Giornale delle Prove Non Distruttive, Monitoraggio, Diagnostica, anno XXV, N. 3, 2004.

184. Cosenza E., Magliulo G., Pecce M., Ramasco R.. La progettazione antisismica di edifici in cemento armato secondo la nuova normativa tecnica. L Edilizia, n. 132, 2004: 34-41. 185. Manfredi G., Il problema sismico dell'abusivismo e le città fuori norma, Parametro, n 251, Anno XXXIV, Maggio/Giugno 2004 186. Mazzolani F.M. Alcune considerazioni sulla realizzazione di quello che sarà il ponte sospeso più lungo del mondo per l'attraversamento dello Stretto di Messina. Costruzioni Metalliche N.1/04, Gennaio-Febbraio 2004. 187. Mazzolani F.M. La Nuova Normativa Sismica per le costruzioni in acciaio. L'Edilizia n. 132, Febbraio-Marzo 2004. (2005) 12 188. Ascione L., Manfredi G., Monti G., Rinforzo di strutture in c.a. e c.a.p., L Edilizia, n 139, Ottobre 2005. 189. Augenti N., Le nuove norme sismiche ed il metodo RAN, L Edilizia, n. 137 - Milano, 2005 190. Bastianini F., Olivito S. R., Pascale G., Prota A., 2005, Controllo di qualità e monitoraggio dei rinforzi FRP, L Edilizia, n. 139, vol. XIV, pp. 66-71. 191. Boschetto, G., D. Tinazzi, C. Modena and A. Nanni, Un Ponte in Calcestruzzo Armato Precompresso con Armatura in Materiale Composito nel Missouri: Analisi, Progettazione e Sperimentazione Preliminari, Building and Construction for Engineers: L Edilizia, Vol. XIV, No. 139, Aug. 2005, pp. 74-77 192. Cosenza E. Il sisma e l importanza della ricerca, Ingegneri, N. 6, Novembre- Dicembre, 2005 193. De Matteis G., Giubileo C., Calderoni B., Mazzolani F.M., Travi in legno di castagno antico Analisi sperimentale mediante prove di rottura a taglio e flessione, L Edilizia, n.141/2005, pag. 44-51, De Lettera Editore sas, Milano 194. Della Corte G., Fiorino L., Landolfo R.. Comportamento sismico di edifici residenziali in acciaio con pareti a taglio in profili formati a freddo e pannelli di rivestimento. Costruzioni Metalliche, Novembre-Dicembre 2005, 47-62 195. Manfredi G., In Italia terremoti medio-alti ma vulnerabilità molto elevata, Villaggio Globale, Anno VIII - N. 29 - Marzo 2005 196. Manfredi G., Prota A., Rinforzo sismico Interventi con FRP su strutture in cemento armato, L Edilizia, n 139, Ottobre 2005 197. Mazzolani F.M. Consolidamento antisismico di edifici in c.a. attraverso tecniche innovative: il progetto ILVA-IDEM. Costruzioni Metalliche n.2, Marzo-Aprile 2005 198. Mazzolani F.M. Problemi strutturali relativi alla realizzazione del Ponte sullo Stretto di Messina. Ingegneri n. 4, Luglio-Agosto 2005 199. Monti, G. and A. Nanni, Principi Generali del Progetto di Rinforzo di Strutture di Conglomerato Cementizio e Muratura Mediante FRP, Building and

Construction for Engineers: L Edilizia, Vol. XIV, No. 139, Aug. 2005, pp. 34-39 200. Nigro E., Savoia M., Il fenomeno della delaminazione nel placcaggio con FRP di strutture di conglomerato cementizio armato, L Edilizia, n. 139, Settembre 2005 2. LIBRI SCIENTIFICI, PRODOTTI SC. MULTIMEDIALI, PRODOTTI CARTOGRAFICI (AUTORE) A DIFFUSIONE INTERNAZIONALE (1996) 2 1. Mazzolani F.M., Gioncu V., Behaviour of Steel Structures in Seismic Areas, Chapman & Hall, London 1996. 2. Mazzolani F.M., Piluso V., Theory and Design of Seismic Resistant Steel Frames, Chapman & Hall, London 1996. (1997) 1 3. Mazzolani F.M., Akiyama H., Behaviour of Steel Structures in Seismic Areas, Edizioni 10/17, Salerno 1997 (1998) 1 4. Mazzolani F.M., Design Principles for Aluminium Structures, Stahlbau Spezial: Aluminium in Practice, Ernst & Sohn. (2001) 2 5. Gioncu V., Mazzolani F.M. Ductility of Seismic Resistant Steel Structures, E & FN Spon, London, 2002 6. Mazzolani F. M., Ghersi A., Landolfo R., Design of Metallic Cold - Formed Thin - Walled Structures,E & FN Spon, London, 2001. (2005) 2 7. Grasso V.F., Beck J.L., Manfredi G., Seismic early warning systems: procedure for automated decision making, Earthquake Engineering Research Laboratory, Report Number EERL 2005-02 8. Mazzolani F.M. Conception des structures en alliage d aluminium selon l Eurocode 9 (EN 1999). Les Eurocodes Conception des bâtiments et des ouvrages de génie civil, Editions Le Moniteur, Paris, 2005. 3. LIBRI SCIENTIFICI, PRODOTTI SC. MULTIMEDIALI, PRODOTTI CARTOGRAFICI (AUTORE) A DIFFUSIONE NAZIONALE

(2000) 1 1. Cosenza E., Manfredi G., Indici e Misure di danno nella progettazione sismica, CNR Gruppo Nazionale per la Difesa dei Terremoti, Roma, 2000. (2004) 2 2. Augenti N., Il calcolo sismico degli edifici in muratura, Utet Libreria, 512 pp., 2004 3. Cosenza E., Magliulo G., Pecce M., Ramasco R.. Collana di manuali di progettazione antisismica, Volume 2, Progetto antisismico di edifici in cemento armato. IUSS Press, Pavia, 2004. (2005) 2 4. Cosenza E., Maddaloni, G., Magliulo G., Pecce M., Ramasco R. Progetto Antisismico di Edifici in Cemento Armato. II edizione aggiornata. IUSS Press. Pavia 5. Greco C. Progetto di elementi in c.a. secondo il metodo semiprobabilistico agli stati limite. Hevelius, Benevento. 4. LIBRI SCIENTIFICI, PRODOTTI SC. MULTIMEDIALI, PRODOTTI CARTOGRAFICI (CURATORE) A DIFFUSIONE INTERNAZIONALE (1996) 1 1. Ramasco R., Rutenberg A., (Editors), Proceedings European Workshop on the Seismic Behaviour of Asymmetric and Setback Structures, Isle of Capri, Italy, October 4-5,1996. (1997) 2 2. Mazzolani F.M., H.Akiyama (Editors), 2 nd International Conference on Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, August 3-8 1997 3. De Luca A., Ramasco R. (Editors), Proceedings of the Internationa Workshop on Testing and modeling of innovative systems for seismic response control of buildings and bridges, Napoli 17-18 May 1996, CUEN ottobre 1997. (2000) 3 4. Mazzolani F.M. (editor), Moment Resistant Connections of Steel Frames in Seismic Areas: Design and Reliability, E & FN Spon, London 2000 5. Mazzolani F.M. Gioncu V. (editors), Seismic Resistant Steel Structures.Springer Verlag Wien - New York, 2000. 6. Mazzolani F.M. Tremblay R. (editors), Behaviour of Steel Structures in Seismic Areas. Proceedings of STESSA 2000 in Montreal, Balkema, Rotterdam, 2000. (2001) 2

7. Cosenza E., Manfredi G., Nanni A. (Eds.), Composites in Construction: A Reality, Capri, Italy, 20-21 July, 2001, American Society of Civil Engineering. (ISBN: 0-7844-0596-4). 8. Mazzolani F.M., Ivanyi M. (editors), Refurbishment of buildings and bridges (CISM Course), Springer - Verlag Wien - New York, 2001. (2002) 2 9. Cosenza E., Manfredi G. (Eds.), Composites in Construction: a reality, ASCE Journal of Composite for Construction, Special Issue, Vol. 6, n. 3, August 2002. 10. Mazzolani F.M.(editor) Aluminium Structural Design (CISM Course) Springer - Verlag Wien - New York (2003) 1 11. Rizkalla, S. and A. Nanni, Editors, Field Applications of FRP Reinforcement: Case Studies. ACI Special Publication No. 215, American Concrete Institute, Farmington Hills, MI, 2003, 434 pp. (2004) 2 12. Pecce M, Manfredi G, Zollo A (Eds.). The Many Facets of the Seismic Risk. Proceedings of the Workshop on Multidisciplinary Approach to Seismic Risk Problem. Sant Angelo dei Lombardi, September 22, 2003. Università degli Studi di Napoli Federico II CRdC-AMRA, 2004. 13. Bursi O.S., Caramelli S., Fabbrocino G., Molina J., Salvatore W., Taucer F.: 3D full-scale seismic testing of a steel-concrete composite building at ELSA. Contr. No: HPR-CT-1999-00059, Eur Report, European Community, 2004. (2005) 2 14. Schaur C., Mazzolani F., Huber G., De Matteis G., Trumph H., Koukkair H., Jaspart J.P., Braganca L. (editors), Improvements of buildings Structural Quality by New Technologies COST C12 Final Conference Proceedings, January 2005, A.A. Balkema Publishers, London, ISBN 04 1536 609 7. 15. Schaur C., Mazzolani F., Huber G., De Matteis G., Trumph H., Koukkair H., Jaspart J.P., Braganca L. (editors), Improvements of buildings Structural Quality by New Technologies Outcome of the Cooperative Activities COST Action C12, January 2005, A. A. Balkema Publishers, London, ISBN 04 1536 610 0. 5 LIBRI SCIENTIFICI, PRODOTTI SC. MULTIMEDIALI, PRODOTTI CARTOGRAFICI (CURATORE) A DIFFUSIONE NAZIONALE (1995) 1 1. Cosenza E. (a cura di) Atti del Secondo Workshop sulle Costruzioni Composte, Napoli,16-17 Giugno, 1995

(2000) 2 2. Cosenza E. (a cura di) Comportamento sismico di edifici in cemento armato progettati per carichi verticali, CNR Gruppo Nazionale per la Difesa dei Terremoti, Roma, 2000, 201 pp. 3. De Luca A. (a cura di), Atti del Workshop Conclusivo del Progetto di Ricerca di Interesse Nazionale - PRIN '97 - su: "Protezione Sismica dell Edilizia Esistente e di Nuova Edificazione Attraverso Sistemi Innovativi", Napoli, 12-13 maggio, 2000. (2002) 1 4. Giangreco E., Ingegneria delle strutture, 3 vol., UTET, Torino, 2002. (2003) 1 5. Occhiuzzi A., Fabbrocino G. (a cura di), Crolli ed Affidabilità delle Strutture, CUEN, Napoli, 2003. 6. CONTRIBUTI SU LIBRI SCIENTIFICI/ ATTI DI CONVEGNO A DIFFUSIONE INTERNAZIONALE O SU CATALOGHI DI MOSTRE INTERNAZIONALI (1995) 37 1. Augenti N., Clemente P., Strength Reduction in Masonry due to Dynamic Loads, IABSE Symposium "Extending the Lifespan of Structures", San Francisco, August, 1995. 2. Augenti N., Museo Archeologico di Napoli: il recupero della settecentesca triplice copertura lignea, IABSE Symposium "Extending the Lifespan of Structures", San Francisco, August, 1995. 3. Calderoni B., Ghersi A., Rinaldi Z., Influence of overstrength on the seismic behaviour of steel frames, 1st European Conference on Steel Structures, Athens, May, 1995. 4. Calderoni B., Ghersi A., Rinaldi Z., Statistical analysis of the seismic behaviour of steel frames, IX International Conference on Metal Structures, Krakow, June, 1995. 5. Clemente P., D'Apuzzo M., Structural Optimization Indices, IASS Symposium 95, Milan, June 5-9, 1995. 6. Clemente P., Traffic Induced Vibrations on Structures, IABSE Symposium "Extending the Lifespan of Structures", San Francisco, August, 1995. 7. Cosenza E., Manfredi G., Realfonzo R., Analytical modelling of bond between FRP reinforcing bars and concrete, Non Metallic (FRP) Reinforcement for Concrete Structures (editor: L. Taerwe), E&FN SPON, RILEM Proceedings 29, 1995. 8. Cosenza E., Manfredi G., Realfonzo R., Modelling of bond in FRP rebars, Report for the CEB T.G. 2.5 Bond Models, November, 1995.

9. De Luca A., De Stefano M., Mazzolani F.M., Frame imperfections for Advanced Inelastic Analysis of Sway Frames 10th ASCE Engineering Mechanics Speciality Conference, Boulder, Colorado, May 22-24, 1995. 10. De Matteis G., Landolfo R., Mazzolani F.M., Wrinkling analysis of lightweight sandwich panels, IV COST-C1 Seismic Working Group Meeting, Anacapri, October, 1995. 11. De Stefano M., Faella G., Realfonzo R., Seismic response of 3D r/c frames: effect of plan irregularity, The Fifth SECED Conference on European Seismic Design Practice, Chester, UK, October 26-27, 1995. 12. De Stefano M., Rutenberg A., The present SEAOC/UBC torsional provisions: are they better than the old ones?, Report 017-531, National Building Research Institute, Technion - Israel Institute of Technology, February, 1995. 13. Imbimbo M., De Luca A., Stress analysis of rubber bearings through finite element modelling, Civil-Comp'95 Conference, Cambridge, U.K., August, 1995. 14. Imbimbo M., Edge effects and stress concentrations of laminated rubber bearings, Abaqus' Users Conference 1995, Paris, France, May-June, 1995. 15. Landolfo R., Mazzolani F.M., Different approaches in the design of slender alluminium alloe sections, International Conference on Steel and Aluminium Structures, Istanbul, May 1995. 16. Lenza P., Rossi P.P., Non linear analysis of masonry buildings, Computer Methods in Structural Masonry, Lisbon, April 19-21, 1995. 17. Mandara A., Mazzolani F.M., Behavioural aspects and ductility demand of aluminium alloy structures, Congresso ICSAS, Istanbul, 1995. 18. Mandara A., Mazzolani F.M., Buckling curves for axially loaded aluminium cylinders, Congresso "Stability of steel structures", Budapest, 1995. 19. Manfredi G., Pecce M., Behaviour of bond between concrete and steel in large postyielding field, Report presentato al meeting del CEB Task Group 2.2, Haifa, April 5, 1995. 20. Manfredi G., Some remarks on the size effect on the rotational capacity, Report presentato al meeting del CEB Task Group 2.2, Delft, March 24, 1995. 21. Mazzolani F.M., Calderoni B., Ghersi A., Critical analysis of torsional provisions in seismic codes, Seventh Canadian Conference on Earthquake Engineering, Montreal, June 5-7, 1995. 22. Mazzolani F.M., Cold-formed thin-walled constructions: recent developments, invited lecture, Eurosteel '95, Athens, May 18-20, 1995. 23. Mazzolani F.M., De Matteis G., Landolfo R., Finite element analysis of shear steel panels, IV COST-C1 Seismic Working Group Meeting, Anacapri, October, 1995. 24. Mazzolani F.M., De Matteis G., Landolfo R., The characterisation of equivalent orthotropic plate for corrugated shear panels, International Colloquium on "Stability of Steel Structures", European Session, Budapest, September 1995.

25. Mazzolani F.M., De Matteis G., Landolfo R., The influence of connecting system on the shear flexibility of corrugated steel panels, IX International Conference on Metal Structures, Krakow, June, 1995. 26. Mazzolani F.M., Del Ponte R., De Matteis G., Landolfo R., Experimental analysis on sandwich panel-to steel frame connecting systems, IV COST-C1 Seismic Working Group Meeting, Anacapri, October, 1995. 27. Mazzolani F.M., Del Ponte R., De Matteis G., Landolfo R., Monotonic and cyclic tests on sandwich panels in shear, IV COST-C1 Seismic Working Group Meeting, Anacapri, October, 1995. 28. Mazzolani F.M., General overview on aluminium structural applications in Europe, Congressen "Inspiratie voor Stad en Land '95", Utrecht, April, 1995. 29. Mazzolani F.M., Grillo M., Fatigue strength of longitudinally welded aluminium alloy structures, International Conference on Aluminium Weldments, Cleveland, Ohio U.S.A., April 3-5, 1995. 30. Mazzolani F.M., Mazzolani S., The New Space Structure of Malpensa 2000: Test and Design, IASS Symposium 95, Milan, June 5-9, 1995. 31. Mazzolani F.M., Seismic - resistant solutions in the new Management Centre of Naples, invited lecture, Fifth World Conference on Habitat and the High- Rise Council on Tall Buildings and Urban Habitat, Amsterdam, May 14-19, 1995. 32. Pecce M., The experimental evaluation of rotational capacity of HSC beams: first results, Report presentato al meeting del CEB Task Group 2.2, Delft, March 24, 1995. 33. Ricciardelli F., Vickery B.J., Some aspects of the wind loads on bridge towers, C.A.N.C.A.M., Victoria, British Columbia, Canada, May, 1995. 34. Rutenberg A., M.De Stefano, On the seismic stability of asymmetric codedesigned structures, Pacific Conference on Earthquake Engineering, Melbourne, Australia, November 20-22, 1995. 35. Serino G., Bettinali F., Bonacina G., Seismic base isolation of gas insulated electrical substations: comparison among different solutions, 4 th US ASCE Conference on Lifelines Earthquake Engineering, San Francisco, August, 1995. 36. Serino G., Bonacina G., Bettinali F., Passive protection devices for high-voltage equipment: design procedures and performance evaluation, 4th US ASCE Conference on Lifelines Earthquake Engineering, San Francisco, August, 1995. 37. Serino G., Passive and active structural control in earthquake engineering, Lecture notes of the 5th and 6th short intensive courses TEMPUS JEP 3008 ICADERS "Integrated CAD of earthquake resistant buildings and civil engineering structures", May, 1995. (1996) 31 38. Calderoni B., A.Ghersi, F.M.Mazzolani, Critical analysis of EC8 approach to face the problem of structural regularity, European Workshop on the seismic behaviour of asymmetric and set-back structures, Capri, 4-5 ottobre 1996