Document version: 1.0 easitec S.r.l. Viale Martiri della Benedicta, 102 15069 Serravalle Scrivia (AL) - Italy Phone +39.0143.686023 - Fax +39.0143.634777 info@easitec.it - www.easitec.it
Revision History Version Date Revision Description 1.0 30/05/2012 Template Creation Page 2 of 14
Table of contents Revision History... 2 1.0 PANORAMICA... 4 1.1 PLC supportati... 4 1.2 Tipo dati... 4 1.3 Tipi di memorie... 5 2.0 SPECIFICHE... 6 3.0 MONTAGGIO DEL MODULO... 7 4.0 WIRING... 8 5.0 CONFIGURAZIONE PLC... 10 6.0 CONFIGURAZIONE HMI... 11 6.1 Come inserire il target del PLC... 12 6.2 Come inserire i tag manualmente... 13 Page 3 of 14
1.0 PANORAMICA 1.1 PLC supportati SNo. PLC Protocollo 1 S7-300 Series, Siemens MPI 2 S7-400 Series, Siemens MPI 3 VIPA-100 V, 200V & 300S MPI 1.2 Tipo dati SNo. Tipo dati Descrizione 1 BOOL Single Bit 2 BYTE Unsigned 8 bit 3 CHAR Signed 8 bit 4 INT Signed 16 bit 5 DINT Signed 32 bit 6 UINT Unsigned 16 bit 7 UDINT Unsigned 32 bit 8 REAL 32 bit floating point value 9 STRING String type with Null character at Page 4 of 14
the end Guida all utilizzo del modulo MPI BrainChild 10 DATE 3 words at HMI (Year, Month, Day) 11 TIME 5 words at HMI (Day, Hr, Min, Sec, msec.) 12 TIME_OF_DAY 4 words at HMI (Hr, Min, Sec, msec.) 13 S5TIME 4 words at HMI (Hr, Min, Sec, msec.) 14 DB All Data type except STRING 1.3 Tipi di memorie SNo. Tipo memoria Accesso Tipo dati 1 I: Discrete Input Read Int / Byte/Word/DWord/DINT/Real 2 I-Bit: Discrete Input Read Bit 3 Q: Discrete Output Read / Write Int / Byte/Word/DWord/DINT/Real 4 Q-Bit: Discrete Output 5 M: Flag/Internal Memory M-Bit: Discrete Input Read / Write Bit Read / Write Int / Byte/Word/DWord/DINT/Real Date/Time/Time_of_day Read / Write Bit 6 DB(300/400) Read / Write Int / Word 7 DB-bit(300/400) Read / Write Bit 8 TN: Timer Current Value Read S5TIME ( WORD type ) 9 CN: Counter Current Value Read WORD Page 5 of 14
2.0 SPECIFICHE Oggetto Descrizione Porta COM dell HMI Nome del modulo Indirizzo MPI (per le stazioni HMI) Target dispositivi (per stazioni PLC) COM3 (espansioni, moduli opzionali) Hnet-01 Configurabile Massimo 31 Configurabili Baud rates (bps) supportati 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M Cavo Connectors Siemens Part number: 6XV1-830-0EH10 o equivalente Siemens Part number: 6GK1500-0EA02 o equivalente Fig: scheda MPI Page 6 of 14
3.0 MONTAGGIO DEL MODULO La porta COM3 è dedicata per i moduli di espansione. COM3, Extension card Page 7 of 14
1. Apri la cover dell HMI rimuovendo tutte le viti 2. Rimuovi le viti M2 X 4 mm e apri lo slot per la scheda MPI 3. Inserisci l espansione nello slot vuoto verificando che sia montata correttamente 4. Rimettere le viti M2 X 4mm per fissare la scheda 5. Riavvitare la cover dell HMI 4.0 WIRING Connettore DB9 femmina dell espansione Pin Segnale Descrizione 1 No connection No connection 2 No connection No connection 3 B Line Positive RxD/TxD, RS485 level Page 8 of 14
4 RTS Request to send 5 GND Bus ground (isolated) Guida all utilizzo del modulo MPI BrainChild 6 +5V Bus Output +5V termination power (isolated, short-circuit protected) 7 No connection No connection 8 A Line Negative RxD/TxD, RS485 level 9 No connection No connection Shield Cable Shield Internally connected to the protective earth via cable shield filters according to the PROFIBUS standard. We suggest using standard Profibus connectors, cables supplied by SIEMENS and source them locally Page 9 of 14
5.0 CONFIGURAZIONE PLC Page 10 of 14
6.0 CONFIGURAZIONE HMI 1. Nel project explorer, doppio click su Connections 2. Click per aggiungere una nuova connessione. 3. Select Type= Other Network. Select Protocol = S7-MPI, click apply per salvare il setup Page 11 of 14
4. Click per aprire la configurazione dell MPI 5. Inserire l Indirrizzo MPI 6.1 Come inserire il target del PLC Click MPI Config e selezionare PLC Con il tasto destro click PLC, poi click Add Device Page 12 of 14
Inserire l indirizzo del PLC qui. Data Item: serve per aggiungere I tag del PLC manualmente DB Item: Serve per aggiungere I tag DB manualmente 6.2 Come inserire i tag manualmente Selezionare Data Item, click con il tasto destro, quindi, click Add Tag A questo punto inserire tutti I dati del tag. Page 13 of 14
Fig: How to add Tag1 with address MW0 manually Address Type: include I, Q, M, T, C e DB Display Format: BOOL, BYTE, CHAR, WORD, INT, S5TIME, COUNTER, DATE, DWORD, DINT, REAL, TIME, TIME_OF_DAY Read/Write: Read & Write, Read Per eliminare il tag: Select Tag, tasto destro del mouse e delete tag Page 14 of 14