OPERAZIONI PRELIMINARI Collegare il bus lampade sui morsetti A B Collegare lo schermo del cavo sul morsetto n. 10 «S». Collegare la tensione di rete nei morsetti 23-24. Premere il pulsante ON-OFF 1
Download e installazione dell app Spy Mobile* per centralina di controllo SPY Micro 1. Aprire il market Android Play Store cliccando sulla relativa icona Fig. 1 2. Effettuare la ricerca dell applicazione Linergy Spy Mobile come mostra la Fig. 2 Fig. 2 * Compatibile con dispositivi Android versione 4.x.x o superiore 2
Avvio dell applicazione per Spy Micro e avvio impianto centralizzato Cliccare le spine staccate Ricerca nuovo impianto La ricerca dell impianto e la successiva connessione al dispositivo Spy Micro avviene premendo il pulsante Dopo aver scelto la connessione wi-fi dal nome «SpyWifi» il dispositivo sarà connesso. PASSWORD: linergylinerg Fig. 3 3
Una volta che l impianto è stato riconosciuto, apparirà a display la schermata seguente: AVVERTENZA: in fase di scansione della rete wi-fi dal dispositivo Android, una volta selezionata la rete Spy wifi attendere dal dispositivo la conferma della avvenuta connessione. E possibile ora toccare il tasto back (indietro) del dispositivo e tornare all app Spy Mobile Premendo il tasto Manutenzione impianto si accede alle funzioni di gestione della comunicazione: 1)MONITOR BUS: permette l attivazione della funzione di monitor bus sull intero impianto(per controllare il corretto cablaggio prima di effettuare l acquisizione) 2)PRIMA ACQUISIZIONE: tramite questo comando si arruolano le lampade presenti sull impianto 4
3)AGGIUNGI LAMPADE: tramite questo comando si aggiungono nuove lampade a quelle eventualmente già presenti fino a un massimo di 30 apparecchi 4)REST MODE: attiva/disattiva il modo di riposo 5
Download e installazione dell app Spy Mobile* per centralina di controllo SPY Micro 1. Aprire l APP Store sul dispositivo Apple cliccando sulla relativa icona Fig. 1 2. Effettuare la ricerca dell applicazione Linergy Spy Mobile come mostra la Fig. 2 Fig. 2 * Compatibile con dispositivi Apple con ios versione 7.x.x o superiore 6
Avvio dell applicazione per Spy Micro e avvio impianto centralizzato Cliccare Su CONNETTI in caso di primo impianto Cliccare Su IMPIANTI in caso di manutenzione impianti gia installati Ricerca nuovo impianto Dopo aver scelto la connessione wi-fi dal nome «SpyWifi» il dispositivo sarà connesso. PASSWORD: linergylinerg Fig. 3 7
Associare il nome al nuovo impianto e cliccare su aggiungi Una volta che l impianto è stato riconosciuto, apparirà a display la schermata seguente: Premendo il tasto SYNC si accede alle funzioni di gestione della comunicazione: 8
AVVERTENZA: in fase di scansione della rete wi-fi dal dispositivo Apple, una volta selezionata la rete Spy wifi attendere dal dispositivo la conferma della avvenuta connessione. 1)MONITOR BUS: permette l attivazione della funzione di monitor bus sull intero impianto(per controllare il corretto cablaggio prima di effettuare l acquisizione) 9
2)NUOVA ACQUISIZIONE: tramite questo comando si arruolano le lampade presenti sull impianto 3)AGGIUNGI LAMPADE: tramite questo comando si aggiungono nuove lampade a quelle eventualmente già presenti fino a un massimo di 30 apparecchi 10
4) REST MODE: attiva/disattiva il modo di riposo 5) RESET LAMPADE: Resetta l attività di comunicazione delle lampade in caso di problemi sul bus. 6) CANCELLA ERRORI: Cancella la memoria delle anomalie riscontrate sui prodotti 7) ON/OFF LAMPADE: Spegne o accende gli apparecchi Permanenti. 11
Dalla schermata SYNC, cliccando sul tasto STATUS, è possibile visualizzare la lista degli apparecchi acquisiti, cliccando sulle singole posizioni si apre una schermata dove è possibile: -Eliminare la lampada -Inserire una descrizione -Effettuare il «Detect» ossia far lampeggiare il led rosso/verde per individuare l apparecchio sul posto Cliccando sul tasto indicato affianco è possibile condividere lo stato dell impianto via SMS o via e-mail. 12
Dalla schermata SYNC, cliccando sul tasto TEST, è possibile effettuare il Test Funzionale della sorgente luminosa della lampade e di Autonomia delle batterie. 13
PRELIMINARY OPERATIONS Connect the fittings bus on the terminals A-B Connect the schield of the cable on the terminal n.10 «S». Connect the mains supply on the terminals 23-24. Push the botton ON-OFF POWER: Green, Spy Micro ON AC: Green, 230Vac present CONNECT: Blu, Wi-Fi communication is established. DATA: Green, data-transfer is in progress.
Download and installation of the app Spy Mobile* for SPY Micro central 1. Click on the icon Play Store to open the Android market Fig. 1 2. Search Linergy Spy Mobile as shown in the Fig. 2 Fig. 2 * Compatible with device Android version 4.x.x or superior
Start of the APP for Spy Micro and the cetralized system Click on the disconnect plug Search new System The search of the system and te next connection to the device Spy Micro get by pushing the button After choosing the wi-fi connection «Spywifi» the device will be connect. PASSWORD: linergylinerg Fig. 3
Once the system has been recognized, it will appear to display the following screen: WARNING: when scanning the network wi-fi from your Android device, once you select the network "wifi Spy" wait for device confirmation of the connection is made. You can now tap the "back" button (back) of the device and return to the app "Mobile Spy" Pressing the Maintenance facility provides access to management functions of communication: 1) BUS MONITOR: allows the activation of the monitor function on the entire bus system (for check the correct wiring before making the acquisition)
2) FIRST ACQUISITION: Means this command, the fittings will be enlist in the central 3) ADD LAMP: Means this command you add new fittings to those already present up to maximum 30 devices. 4) REST MODE: enables / disables the rest mode 5) LAMP RESET: Resets the communication activities of the lamps in case of problems on the bus 6) CLEAN ERRORS: Delete the memory of the anomalies found in the products 7) ON/OFF LAMPADE: ON OFF Permanent fittings..
From the MENU screen, click on the MAINTENANCE button to start the Functional Test of the light source of the lamp and the Battery s duration. From the MENU screen, click on the RESULT REPORT button to start the screen window that summarizes the tests performed with the results
Download e installazione dell app Spy Mobile* per centralina di controllo SPY Micro 1. Open the App Store on the Apple device Fig. 1 2. Search Linergy Spy Mobile as shown in the Fig. 2 Fig. 2 * Compatible with Apple device, ios 7.x.x o higher.
Start App Spy Micro and start centralized System Click on CONNECT for The first time Click on Registered installation if you already have an installation Search new Installation After choosing the wi-fi connection by name «SpyWifi» the device will be connect PASSWORD: linergylinerg Fig. 3
Associate the name to the new installation and click to Add Once the plant has been recognized, it will appear to the display the following screen: Pressing the SYNC you access to the management functions of communication:
WARNING: when scanning the network wi-fi from your Android device, once you select the network "wifi Spy" wait for device confirmation of the connection is made. You can now tap the "back" button (back) of the device and return to the app "Mobile Spy" 1) BUS MONITOR: allows the activation of the monitor function on the entire bus system (for check the correct wiring before making the acquisition)
2) FIRST ACQUISITION: Means this command, the fittings will be enlist in the central 3) ADD LAMP: Means this command you add new fittings to those already present up maximum 30 devices. 4) DELETE ERRORS: Delete the memory of the anomalies found in the products
5) REST MODE: enables / disables the rest mode 6) LAMP RESET: Resets the communication activities of the lamps in case of problems on the bus. 7) ON/OFF LAMPADE: ON OFF Permanent fittings..
From the SYNC screen by clicking on the STATUS button, you can view the list of the fittings acquired by clicking on the individual positions opens a screen where you can: -Delete The lamp -Insert A description -Make The "Detect" that is to flash the red / green LED to locate the device in place By clicking on the button shown beside you can share the system status via SMS or e-mail.
SPY MICRO MANUALE DI PROGRAMMAZIONE VER. 1.0 SISTEMA DI SUPERVISIONE CENTRALIZZATA Wi-Fi DELL IMPIANTO DI EMERGENZA PARTNER UFFICIALE UDINESE CALCIO LINERGY s.r.l. Via A. De Gasperi, 9 63075 Acquaviva Picena (AP) - ITALY tel. +39 0735 5974 / fax +39 0735 597474 www.linergy.it info@linergy.it
From the SYNC screen, click on the TEST button, you can make the Functional Test of the light source of the lamp and the Battery s duration.