USB Laser Scanner Barcode Modello TC- PB 7001 Manuale D' Uso V:1508

Transcript

1 USB Laser Scanner Barcode Modello TC- PB 7001 Manuale D' Uso V:1508

2 Grazie Per aver scelto i prodotti TECNO, vi preghiamo di leggere attentamente il manuale prima di utilizzare il prodotto. Contenuto della confezione: 1*barcode scanner 1*cavo (USB/KB/COM) 1*Manuale D'istruzioni Angolo di Lettura 1. Mantenere una leggera inclinazione tra lo scanner e il barcode da leggere 2. Non superare angolo di inclinazione di 45 altrimenti il barcode non verrà letto. 3. Il raggio deve coprire l'intera larghezza del barcode durante la scansione Product Introduction Questo prodotto è un lettore Barcode Laser, con cavo USB, Plug & play che consente di leggere tutti gli standard di Barcode 1D compreso UPC-A, UPC-E, EAN-13/JAN-13, ISBN/ISSN code, EAN-8/JAN-8, code 39, code 93, code 128, Interleaved 2 of 5, industrial 2 of 5, Chinese Postal Code, MSI/Plessy and Codabar. Questo Barcode supporta sia connesione USB ( incluso nella confezione ) che PS2 e RS232 (opzionale). Corretto angolo di lettura Incorretto angolo di lettura Corretto angolo di lettura Incorretto angolo di lettura Descrizione : Indicatore LED Connessione dello Scanner USB: Connettere il cavo Usb alla corrispondente USB dell'apparecchio su cui installare il prodotto Cornice di Protezione da caduta o urti trigger button PS/2: 1. Spegnere l' apparecchio su cui installare il prodotto 2. Disconnettere la tastiera. 3. Assicurarsi che il cavo si adatto alla connessione. 4. Collegare il cavo all apparecchio 5. Connettere la tastiere. 6. Avviare l'apparecchio. Fessura per Sbloccaggio Cavo di connessione Porta collegamento tastiera Per disassemblare il cavo di connessione dal lettore, introdurre nel buco di sbloccaggio un ferretto e spingere( e quindi sbloccare il cavo ), nello stesso tempo estrarre il cavo tirandolo verso il basso Cavo Tastiera 1 2

3 RS232: 1. Spegnere l' apparecchio su cui installare il prodotto Material ABS+PC 2. Assicurarsi che il cavo sia adatto al tipo di connessione. 3. Connettere l'alimentatore al cavo e collegarlo allo scanner 4. Avviare l'apparecchio. 5. Eseguire la scansione del codice a barre corrispondente nel manuale Per attivare l'interfaccia Parametri Tecnici Performance Parameters Interface USB,RS232,PS/2 Baud rate Rs232 baud rate: Light source Visible laser 650nm (national laser safety standard class 1) Decoding capability Trigger mode Sensing distance Resolution Depth of field Decoding speed Scanning width Prompt mode Contrast 30% Scan angles Code 39, Code 93, Code128, UCC/EAN-128, EAN-8, EAN-13, UPC-A, ISSN+2, ISBN+5, Industrial 25, ect. Manual trigger, auto scanning, continuous scanning 2 15cm(100cm ) Minimum 0.1mm(4mils) 2-9cm(0.1mm bar width); 3-50cm(0.3mm bar width) 300scans/sec 5cm-30cm buzzer, indicator light Roll30, Pitch75, Yaw65 Cylinder horizontal Diameter 35mm Physical Parameters Material ABS+PC Power supply DC 5V ±5% Operating current Quiescent current IP grade Operating Temp. Storage Temp. Operating Humidity Storage Humidity 50ma(operation mode);30ma(standby mode); 100ma(max peak) 20mA Environment Parameters ESD protection Shock resistance IP 54 0 to 50 ºC / 32 to 122 ºF 0 to 50 ºC / 32 to 122 ºF 20-85% (non-condensing) 20-85% (non-condensing) 15KV air discharge Automatic Function Settings 1.5m free fall on concrete surface 1. If it is an automatic barcode scanner, it has already been well set with the auto scanning function. When there s an object passes the sensitive area (the sensitive area depends on the size of the object, normally is 5cm-30cm), the scanner will scan automatically. After it reads a bar code successfully, the light will be off and a trigger cycle finished. The scanner will read again when there s an object passes the sensitive area. 2. For the automatic barcode scanner with stand, the red light of the scanner will be on when the scanner is power on and put on the stand. This means the auto scanning function is on. When the scanner is removed from the stand, the red light will be off. Now the auto scanning function is off and the scanner turns to manual trigger mode. 3. Press the button for 10 seconds, the scanner will turn to the auto scanning mode. To switch to manual trigger mode, press the button for 10 seconds again. (This is the patent of our company.) Notice: After reading a bar code successfully, please clear the barriers in the sensitive area. Otherwise, the scanner won t read again. Advanced Setup Mode This function is only for the scanner with the version information V To add prefix/suffix or input the first/last few digits, the scanner must be KB interface. Scan the below setup bar code, the scanner will get into advanced setup mode. For more details of how to finish the settings, please contact our after-sales team. Enter Setup Mode 3 4

4 Function Settings Output Mode Language Version Info Reset Factory Defaults American English German French Italian Keyboard Wedge Serial Buzzer Reset Character Capital/Lower Case Good Read Beep Sound-OFF Good Read Beep Sound-ON Capital Lower Case Reading Mode Reset Single Scan Multiscan Continuous Scan Image Single Scan No Trigger Multiscan No Trigger Pulse Serial Mode Parameter Settings Baud Rate Hand Shake Enable Disable None XON/OFF Code ID RTS/CTS ACK/NAK Send Code ID as Prefix Send Code ID as Prefix-Disable Hand Shake Timeout- 2secs Hand Shake Timeout- 5secs Send Code ID as Suffix Send Code ID as Suffix-Disable Data Bits

5 Stop Bits 1 2 Code 11 Check Digits Code 11 /on Code 11/ off None ODD ID Character m Even Mark Check Digit Space Reset Code 11 redundancy enable Code 93 Code 11 redundancy disable Termination String Setup Bar Codes Code 93 /on Code 93 /off Cancel Suffix Termination CHAR-CR ID Character h Termination CHAR-space Termination CHAR-TAB Termination CHAR-TAB/CR Termination CHAR-CR+CR Code 93 redundancy enable Code 93 redundancy disable Code 39 All Codes preamble-stx All Codes preamble-etx Code 39/on Code 39/off Hide the First CHAR Hide the Last CHAR Code 39 ALL ASCII-on Code 39 ALL ASCII-off 7 8

6 Send start/stop CHARS - enable Send start/stop CHARS - disable ID Character k ID Character a CODABAR redundancy enable CODABAR redundancy disable Code 39 redundancy enable Code 39 redundancy disable Bar width gap allowed- enable Bar width gap allowed - disable Code 128 Interleaved/ITF25 Code 128 /on Code 128/off Interleaved/ITF25-on Interleaved/ITF25-off ID Character g ID Character z ID Character I ITF25 redundancy enable ITF25 redundancy disable Code 128 redundancy enable Code 128 redundancy disable Industrial 25 CODABAR Industrial 25/on Industrial 25/off CODABAR/on CODABAR/off ID Character j Send start/stop CHARS - enable Send start/stop CHARS - disable Industrial 25 redundancy enable Industrial 25 redundancy disable 9 10

7 MSI/PLESSEY MSI-on MSI-off Convert UPC-E into UPC-A enable Convert UPC-E into UPC-A disable ID Character f Transmit system bit enable Transmit system bit disable MSI redundancy enable MSI redundancy disable Transmit check digit enable Transmit check digit disable UPC-A ID Character c EAN-13 UPC-A/on UPC-A/off EAN-13/on EAN-13/off Convert UPC-A into EAN13 enable Convert UPC-A into EAN13 disable Convert EAN-13 into ISBN enable Convert EAN-13 into ISBN disable Transmit system bit enable Transmit system bit disable Transmit system bit enable Transmit system bit disable Transmit check digit enable Transmit check digit disable Transmit check digit enable Transmit check digit disable ID Character b ID Character e UPC-E EAN-8 UPC-E/on UPC-E/off EAN-8/on EAN-8/off 11 12

8 Transmit system bit enable Transmit system bit disable Transmit check digit enable Transmit check digit disable ID Character d ISSN ISSN/on ISSN/off ID Character f UPC/EAN UPC/EAN supplements disable UPC/EAN supplements- 2 digits UPC/EAN supplements- 5 digits UPC/EAN supplements- 2&5 digits UPC/EAN redundancy enable UPC/EAN redundancy disable Code 32 CODE 32/on CODE 32/off 13 14

9 15 16

10 17 18

11 19 20

12 21