ORDINE DEGLI INGEGNERI DELLA PROVINCIA DI BERGAMO

ORDINE DEGLI INGEGNERI DELLA PROVINCIA DI BERGAMO Corso di aggiornamento professionale Dott. Ing. Giulio Pandini IX Corso Università degli Studi di Bergamo - Facoltà di Ingegneria Dalmine 22 novembre 2003 Bibliografia Prof. Ing. Giovanni Fabbrocino Dipartimento di Analisi e Progettazione Strutturale Università di Napoli Federico II

STRUTTURE COMPOSTE ACCIAIO-CALCESTRUZZO LETTERATURA TECNICA INTERNAZIONALE SULL ARGOMENTO 1. Ahmed B., Li T.Q., Nethercot D.A. (1997): Design Of Composite Finplate And Angle Cleated Connections, Journal Of Constructional Steel Research, Vol. 41, No. 1. 2. Altmann A., Maquoi R., Jaspart J.P. (1991): Experimental Study Of The Non-Linear Behaviour Of Beam-To-Column Composite Joints, Journal Of Constructional Steel Research, Vol. 18. 3. Amadio C., Puhali R., Zandonini R. (1989): L'effetto Della Continuità Parziale Nei Telai Composti, C.T.A. (Capri, 1989). 4. American Institute Of Steel Construction, (1997). Seismic Provisions For Structural Steel Buildings. Aisc, Chicago, Il 5. Anderson D., Najafi A.A. (1994): Performance Of Composite Connections: Major Axis End Plate Joints, Journal Of Constructional Steel Research, Vol. 31. 6. Aribert J.M. (1988): Etude Critique Pour Voie Numerique De La Methode Proposee Dans L'eurocode 4 Pour Le Dimensionnement Des Poutres Mixtes Acier-Beton A Connection Partielle, Construction Metallique, No. 1 (March, 1988). 7. Aribert, J.-M. And Lachal, A. (1999), "Behaviour Of Beam To Column Composite Connections", Internal Report For Recos Project, Insa Rennes. 8. Asccs: Concrete Filled Steel Tubes: A Comparison Of International Codes And Practices Seminar Asscs, International Conference On Composite Construction Conventional And Innovative, Innsbruck, September, 1997. 9. Aval, S.B.B., Saadeshvaziri, M.A. And Golafshani, A.A. (2002). Comprehensive Composite Inelastic Fiber Element For Cyclic Analysis Of Concrete-Filled Steel Tube Columns. Journal Of Engineering Mechanics, Asce, 128(4), 428-437. 10. Ballerini M., Bursi O.S., Zandonini R. (1995): Comportamento Di Sottostrutture Composte Acciaio-Calcestruzzo Con Connessione Parziale E Completa Soggette Ad Azioni Cicliche, Ii Workshop Italiano Sulle Costruzioni Composte (Napoli, 1995). 11. Ballio G., Calado L. And Castiglioni C. A. (1997): Low Cycle Fatigue Behaviour Of Structural Steel Members And Connections, Fatigue & Fracture Of Engineering Materials & Structures, Vol. 20, No. 8, P. 1129-1147. 12. Ballio G., Castiglioni C.A., (1995): A Unified Approach For The Design Of Steel Structures Under Low And High Cycle Fatigue, Journal Of Constructional Steel Research, Vol. 34, P. 75-101. 13. Ballio G., Zandonini R. (1985): An Experimental Equipment To Test Steel Structural Members And Subassemblages Subjected To Cyclic Loads, Ingegneria Sismica, Vol. 3, No. 2. 14. Ballio, G., Calado, L., Iori, I. And Mirabella-Roberti, G. (1987). I Problemi Delle Grandi Costruzioni In Zona Sismica. Associazione Italiana Cemento Armato E Precompresso, Roma, 31-44. 15. Basu A.K., Somerville W. (1969): Derivation Of Formulae For The Design Of Rectangular Composite Columns, Proceeding Of Civil Engineering Department, London,, Supplementary Volume, Pp.233-280. 16. Benussi F., Bernuzzi C., Noè S., Zandonini R. (1993): Analisi Sperimentale Di Telai Composti Con Giunti Semirigidi, C.T.A. (Viareggio, 1993). 17. Benussi F., Puhali R., Zandonini R. (1989): I Giunti Semi-Rigidi Nei Telai Composti Di Acciaio E Calcestruzzo, Costruzioni Metalliche, No. 5. 18. Bernuzzi C., Calado L., Castiglioni C.A., (1997): Ductility And Load Carrying Capacity Prediction Of Steel Beam-To-Column Connections Under Cyclic Reversal Loading, Journal Of Earthquake Engineering, Vol. 1, No. 2, P. 401-432. 19. Bernuzzi C., Noè S., Rassati G.A. (1997): On The Modelling Of Steel-Concrete Composite Joints Under Seismic Actions By Means Of The Component Approach, (Iii Workshop Italiano Sulle Strutture Composte, Ancona, 1997). 20. Bertero, V.V. (1997). Performance-Based Seismic Engineering: A Critical Review Of Proposed Guidelines. Seismic Design Methodologies For The Next Generation Of Codes, Fajfar & Krawinkler Eds. Balkema Rotterdam. 21. Beutel, J., Thambiratnam, D., Perera, N. (2002): Cyclic Behaviour Of Concrete Filled Steel Tubular Column To Steel Beam Connections, Engineering Structures, Vol. 24, No. 1 (January, 2002), P. 29-38.

22. Bonacci, J.F. And Wight, J.K. (1996).Displacement-Based Assessment Of Reinforced Concrete Frames In Earthquake. Mete A. Sozen Symposium, Aci Publication Sp 162, 117-133. 23. Bouwkamp, J., Parung, H. And Plumier, A. (1998), Bi-Directional Cyclic Response Study Of A 3d Composite Frame. Proc. Of The Eleventh Ecee Conf., Paris. 24. Boyd, P.F., Cofer, W.F. And Mclean, D.I. (1995). Seismic Performance Of Steel-Encased Composite Columns Under Flexural Bending. Aci Structural Journal, 92(3), 335-364. 25. Bursi O. S., Caldara R. (2000). Composite Substructures With Partial Shear Connection: Low Cycle Fatigue Behaviour And Analysis Issues. Proceedings Of The 12th World Conference On Earthquake Engineering, Wcee, Paper 0498, Auckland, New Zealand. 26. Bursi, O. S., And Gramola, G. (1999), Behaviour Of Headed Shear Connectors Under Low- Cycle High Amplitude Displacements. Materials And Structures, Rilem, 32, 290-297. 27. Bursi, O. S., And Gramola, G. (2000), Behaviour Of Composite Substructures With Full And Partial Shear Connection Under Quasi-Static Cyclic And Pseudo-Dynamic Displacements. Materials And Structures, Rilem, 33, 154-163. 28. Calado L., Castiglioni C.A., Bernuzzi C., (1997): Low-Cycle Fatigue Of Steel Components: A Method For Re-Analysis Of Test Data And A Design Approach Based On Ductility, Iset Journal Of Earthquake Technology, Vol. 37, No. 4 (December, 2000), P. 47-63. 29. Carbone V., Nascè V.: On The Effective Width And Other Interaction Aspects In Composite Steel-Concrete Beams X C.T.A., Montecatini, 121-135, 1985. 30. Castiglioni C.A. (1999): Failure Criteria And Cumulative Damage Models For Steel Components Under Low-Cycle Fatigue, Proc. Xvii C.T.A. (Naples, October, 1999). 31. Cen (2000) Env 1994-1-1, Eurocode 4 - Design Of Composite Steel And Concrete Structures - Part 1-1: General Rules And Rules For Buildings. Draft N. 2. 32. Chou, C.-C., Uang, C.-M. (2002): Cyclic Performance Of A Type Of Steel Beam To Steel- Encased Reinforced Concrete Column Moment Connection, Journal Of Constructional Steel Research, In Press. 33. Climenhaga J.J. And Johnson R.P.: Local Buckling In Continuous Composite Beams - The Structural Engineer, Vol. 50, N 9, Pp. 367-374, 1972. 34. Cnr 10016 (1999). Strutture Composte Di Acciaio E Calcestruzzo Istruzioni Per L impiego Nelle Costruzioni. Cnr Bollettino Ufficiale N.192 Norme Tecniche. 35. Cosenza E., Materazzi A.L., Nigro E. (1994): Resistenza Al Fuoco Di Colonne Composte Acciaio-Calcestruzzo: Analisi Normativa E Confronti Prestazionali Con Elementi In Acciaio E In Cemento Armato, Costruzioni Metalliche, N. 1, Gennaio-Febbraio. 36. Cosenza E., Mazzolani S., Pecce M.: Ultimate Limit State Checking Of Continuous Composite Beams Designed To Eurocode Recommendations - Costruzioni Metalliche, N.5, 1992. 37. Cosenza E., Mazzolani S.: Analisi In Campo Lineare Di Travi Composte Con Connessioni Deformabili: Formule Esatte E Risoluzioni Alle Differenze 1 Workshop Italiano Sulle Strutture Composte, Trento, Giugno, 1993a. 38. Cosenza E., Mazzolani S.: La Valutazione Delle Frecce A Breve Termine Nelle Travi Composte Acciaio-Calcestruzzo: L influenza Del Comportamento Non Lineare Dei Connettori - 1 Workshop Italiano Sulle Strutture Composte, Trento, Giugno, 1993b. 39. Cosenza E., Pecce M. (1993): Resistenza A Compressione Di Colonne Con Sezione Di Acciaio Riempita Di Calcestruzzo, Giornate Italiane Della Costruzione In Acciaio (Viareggio, Ottobre, 1993). 40. Cosenza E., Pecce M. (1996): Stato Limite Tensionale E Stato Limite Ultimo Nelle Sezioni Composte Acciaio-Calcestruzzo Di Tipo Fully Encased; Atti Dell'11 Congresso Cte 1996, Napoli, 7-9 Novembre, Pp.473-481. 41. Cosenza E., Pecce M. (1999): Le Costruzioni Composte Acciaio-Calcestruzzo: Le Nuove Istruzioni Cnr-10016, Atti Delle Giornate Italiane Della Costruzione In Acciaio, Xvii Cta, Napoli, 3-5 Ottobre,Pp.. 42. Cosenza E., Pecce M. (2000): Le Colonne Composte Acciaio-Calcestruzzo: Analisi Sperimentali, Modelli Di Calcolo, Indicazioni Normative, Costruzioni Metalliche, No. 2. 43. Cosenza E., Pecce M., Verderame G. (1998): Le Colonne Composte Acciaio-Calcestruzzo: Confronti Sperimentali E Normativi; Atti Del 12 Congresso Cte, Padova, 5-7 Novembre, Pp.481-490. 44. Cosenza E., Zandonini R. (1997): Composite Construction, In Handbook Of Structural Engineering W.F. Chen Ed., Crc. 45. Cosenza E., Zandonini R.: Le Strutture Composte Acciaio-Calcestruzzo Ingegneria Delle Strutture, E. Giangreco, Vol. 3, Utet, 2002. 46. Cost C1 (1997): Composite Steel-Concrete Joints In Braced Frames For Buildings, European Communities, Brussels.

47. Dezi L, Tarantino A.M.: Creep In Composite Continuous Beams. I: Theoretical Treatment - Journal Of Structural Engineering Asce, No. 119, Vol. 7, 2095-2111, 1993. 48. Din 18800 (1984). Stahlbauten Verbundtragwerke Aus Stahl Und Beton, Bemessung Und Konstruktion. 49. Doneux, C. And Parung, H. (1998), A Study On Composite Beam-Column Subassemblages. Proc. Of The Eleventh Ecee Conf., Paris. 50. Doneux, C. And Plumier, A. (1999), "Seismic Design Of The Slab Reinforcements Of Composite Beams On Moment Frames", Internal Report For Icons Project, Université De Liège. 51. Dowling P.J., Harding J.E., Bjorhovde R..G. (1992): (Editors), Constructional Steel Guide An International Guide, Part 4, Composite Structures, Elsevier Applied Science. 52. Eccs: Composite Beams And Columns To Eurocode 4, 1993. 53. Elghazouli A.Y., Dowling P.J. (1992): Behaviour Of Composite Members Subjected To Earthquake Loading, Earthquake Engineering, Proceedings Of The Tenth World Conference, Balkema, Rotterdam, Pp.2621-2626. 54. Elnashai A.S., Broderick B.M., Dowling P.J. (1995): Earthquake-Resistant Composite Steel- Concrete Structures, The Structural Engineer, Vol. 73, No. 8 (18 April, 1995). 55. Elnashai A.S., El-Ghazouli A.Y., Bowling P.J. (1990): International Assessment Of Design Guidance For Composite Columns, Journal Of Constructional Steel Research, Vol. 15. 56. Elnashai A.S., Elghazouli A.Y., Dowling P.J. (1991): Response Of Flexural Composite Members To Simulate Earthquake Loading. International Conference On Steel And Aluminium Structures, Proceedings Of Icsas, Singapore, Pp.189-196. 57. Elnashai, A.S. And Elghazouli, Y. (1993-A). Performance Of Composite Steel-Concrete Members Under Earthquake Loading, Part 2: Parametric Studies And Design Considerations. Earthquake Engineering And Structural Dynamics, 22(4), 347-368. 58. Elnashai, A.S. And Elghazouli, Y. (1993-B). Performance Of Composite Steel-Concrete Members Under Earthquake Loading, Part 1: Analytical Model. Earthquake Engineering And Structural Dynamics, 22(4), 315-346. 59. Elnashai, A.S. Broderick, B.M.. (1994). Seismic Resistance Of Composite Beam-Columns In Multi-Storey Structures. Part1: Experimental Studies. Journal Of Constructional Steel Research, 30(3), 201-229. 60. Eurocode 4: Common Unified Rules For Composite Steel And Concrete Structures; Part 1.1 - European Committee For Standardisation (Cen), Env 1994-1-1, 1992. 61. Eurocode 4: Design Of Composite Steel And Concrete Structures Part 2 - European Committee For Standardisation (Cen), Env 1994-2, 1997. 62. Eurocode N 4 (1997). Design Of Composite Steel And Concrete Structures Part 2: Composite Bridges, Prenv 1994-2. 63. Eurocode N 8 (2002). Structures In Seismic Regions. Pren 1998-1-1,2,3, Draft 5. 64. European Convention For Constructional Steelwork: Composite Structures - The Construction Press Limited, 1981. 65. Fabbrocino G. Modellazione E Comportamento Sperimentale Di Travi Continue Composte Acciaio-Calcestruzzo Tesi Di Dottorato In Ingegneria Delle Strutture, Università Di Napoli Federico Ii, 1998. 66. Fabbrocino G., Manfredi G., Cosenza E. (1999). Non-Linear Analysis Of Composite Beams Under Positive Bending. Computers & Structures Vol. 70, Pp. 77-89. 67. Fabbrocino G., Manfredi G., Cosenza E. (2000). Analysis Of Continuous Composite Beams Including Partial Interaction And Bond. Asce Journal Of Structural Engineering, Vol. 126, Pp. 1288-1294. 68. Fabbrocino G., Manfredi G., Cosenza E., Pecce M. (2001). Some Remarks On Deformation Capacity Of Composite Frames In Seismic Areas. Proceedings Of The First International Conference On Steel And Composite Structures, Icscs 01. 69. Fang, L. X., Chan, S. L., Wong, Y. L. (1999): Strength Analysis Of Semi-Rigid Steel-Concrete Composite Frames, Journal Of Constructional Steel Research, Vol. 52, No. 3 (December, 1999), P. 269-291. 70. Fema, (1999). Seismic Design Criteria For New Moment-Resisting Steel Frame Construction. Federal Emergency Manegement Agency, Draft, November. 71. Fujinaga T., Tsuda K., Matsui C. (2000). Hysteresis Model For Concrete Filled Steel Square Tubolar Beam-Columns. Proccedings Of 12 th World Conference On Earthquake Engineering, Auckland, January, N. 0424. 72. Hajjar J.F. (2000): Concrete-Filled Steel Tube Columns Under Earthquake Loads, Progress In Structural Engineering And Materials, No. 2. 73. Hajjar J.F., Gourley B.C. (1997): A Cyclic Nonlinear Model For Concrete-Filled Tubes. I: Formulation, Journal Of Structural Engineering, Asce, Vol. 123, No. 6 (June, 1997).

74. Hajjar, J.F. (2002). Composite Steel And Concrete Structural Systems For Seismic Engineering. Journal Of Constructional Steel Research, 58(5-8), 702-723. 75. Hajjar, J.F. And Gourley, B.C. (1996). Representation Of Concrete-Filled Steel Tube Cross- Section Strength. Journal Of Structural Engineering, Asce, 122(11), 1327-1336. 76. Hope-Gill M.C., Johnson R.P.: Tests On Three Three-Span Continuous Beams, Proc. Instn. Civ. Engrs., Part 2, Vol. 61, 367-381, Giugno, 1976. 77. Huber G., Tschemmernegg F. (1998): Modelling Of Beam-To-Column Joints, Journal Of Constructional Steel Research, Vol. 45, No. 2. 78. Huber, G., (2001). Structural Innovation At The Millennium Tower, Vienna. Concrete Journal (The Concrete Society, Uk), Vol.35-No.6, Berkshire. 79. Johnson R.P., Anderson D.: Designers Handbook To Eurocode 4 - Thomas Tellford, London, 1993. 80. Johnson R.P., Hope-Gill M.C.: Applicability Of Simple Plastic Theory To Continuous Composite Beams, Proc. Instn. Civ. Engrs., Part 2, Vol. 61, 127-143, Marzo, 1976. 81. Johnson R.P.: Composite Structures Of Steel And Concrete Vol. 1 - Blackwell Scientific Publications, Vol. 1, 1994. 82. Kato B. (1996): Columns Curves Of Steel-Concrete Composite Members, Journal Of Constructional Steel Research, Vol. 39, No. 2. 83. Kemp A.R., Dekker N.W.: Available Rotation Capacity In Steel And Composite Beams - The Structural Engineer, Vol. 69, N. 5, Pp. 88-97, Marzo, 1991. 84. Kemp, A. R., Nethercot, D. A. (2001): Required And Available Rotations In Continuous Composite Beams With Semi-Rigid Connections, Journal Of Constructional Steel Research, Vol. 57, No. 4 (April, 2001), P. 375-400. 85. Kim, K. D., Engelhardt, M. D. (2002): Monotonic And Cyclic Loading Models For Panel Zones In Steel Moment Frames, Journal Of Constructional Steel Research, In Press. 86. Lee S.J., Lu L.W. (1989): Cyclic Tests Of Full-Scale Composite Joint Subassemblages, Journal Of Structural Engineering, Asce, Vol. 115, No. 8 (August, 1989). 87. Leon R.T. (1990): Semi-Rigid Composite Construction, Journal Of Constructional Steel Research, No. 15. 88. Leon R.T. (1997): Analysis And Design Problems For Pr Composite Frames Subjected To Seismic Loads, Engineering Structures, Vol. 20, No. 4-6. 89. Leon R.T. And Zandonini R: Composite Connections. In Constructional Steel Design, An International Guide - P.J. Dowling, J.E. Harding And R. Bjorhovde, P. 501-522. Elsevier Applied Science, 1992. 90. Leon, R. T. (1998), Analysis And Design Problems For Pr Composite Frames Subjected To Seismic Loads, Engineering Structures, 20(4-6), 364-371. 91. Li T.Q., Moore D.B., Nethercot D.A, Choo B.S. (1996): The Experimental Behaviour Of A Full-Scale, Semi-Rigidly Connected Composite Frame: Overall Considerations, Journal Of Constructional Steel Research, Vol. 39, No. 3. 92. Madas, P. And Elnashai, A.S. (1989). A Theorethical Model For Composite Beam-Column Under Cyclic Loading. Engineering Seismology And Earthquake Engineering Report, Research Report No. Esee 89/10, Imperial College. 93. Mander, J.B., Priestley, M.J.N. And Park, R. (1988). Theorethical Stress-Strain Model For Confined Concrete. Journal Of Structural Engineering, Asce, 114(8), 1804-1826. 94. Manfredi, G., Fabbrocino, G. And Cosenza, E. (1999), Modeling Of Steel-Concrete Composite Beams Under Negative Bending, J. Of Engrg. Mech. Asce, 125(6), 654-662. 95. Matsuo A., Nakamura Y., Takamatsu T., Yoshimasa Matsui Y. (2000). Fracture And Plastic Deformation Capacity Of The Welded Joint Of Composite Beam-To-Steel Column Connections. Proceedings Of The 12 th World Conference On Earthquake Engineering, Wcee, Paper 0181, Auckland, New Zealand. 96. Mirza A., Hyttinen V., Hyttinen E. (1996). Physical Tests And Analysis Of Composite Steel- Concrete Beam-Columns. Asce Journal Of Structural Engineering, Vol.122, N.11, Pp.1317-1326. 97. Moore W.P.: An Overview Of Composite Construction In The United States - Composite Construction In Steel And Concrete, C.D. Buckner And I.M. Viest Ed., Asce, P.P. 1-17, 1988. 98. Morino, S. Matsui, C. And Watanabe, H. (1984). Strength Of Biaxially Loaded Src Columns. Composite Mixed Constuction, Proceedings Of Us/Japan Joint Seminar, Seattle Washington, Asce, 185-194. 99. Nakanishi, K., Kitada, T. And Nakai, H. (1999) Experimental Study On Ultimate Strength And Ductility Of Concrete Filled Steel Columns Under Strong Earthquake. Journal Of Constructional Steel Research, 51(3), 297-319.

100. Nethercot D.A., Li T.Q., Choo B.: Required Rotations And Moment Redistribution For Composite Frames And Continuous Beams Journal Of Constructional Steel Research, N 35, Pp. 121-163, 1995. 101. Newmark N.M., Siess C.P., Viest I.M.: Tests And Analysis Of Composite Beams With Incomplete Interaction Proc. Of Society For Experimental Stress Analysis, N 1, Pp. 75-92, 1951. 102. Nigro E. (1995). La Valutazione Della Capacità Portante Di Colonne Composte Acciaio- Calcestruzzo Pressoinflesse. Ii Workshop Italiano Sulle Costruzioni Composte, Napoli, 22-23 Giugno, Pp.211-229. 103. Nigro E., Materazzi A.L., Cosenza E. (1998). Stabilità Di Colonne Composte Acciaio- Calcestruzzo In Caso Di Incendio. Iii Workshop Italiano Sulle Costruzioni Composte, Ancona, 29-30 Ottobre, Pp.317-330. 104. Noè S., Rassati G.A. (1998): Esame Del Comportamento Di Nodi Semirigidi In Telai A Struttura Mista Acciaio-Calcestruzzo Soggetti A Sisma, Iii Workshop Italiano Sulle Strutture Composte (Ancona, 1998). 105. Oehlers D.J., Johnson R.P.: The Strength Of Stud Shear Connections In Composite Beams - The Structural Engineer, N 2, Giugno, 1987. 106. Oelhers D.J., Bradford M.A., Composite Steel And Concrete Structural Members, Fundamental Behaviour - 1st. Ed. Pergamon, 1995. 107. Ollgard J.G., Slutter R.G., Fisher J.W.: Shear Strength Of Stud Connectors In Lightweight And Normal Weight Concrete - Aisc Engineering Journal, Pp. 55-64, 1971. 108. Ordinanza Del Presidente Del Consiglio Dei Ministri 20 Marzo 2003, N. 3274, Primi Elementi In Materia Di Criteri Generali Per La Classificazione Sismica Del Territorio Nazionale E Di Normative Tecniche Per Le Costruzioni In Zona Sismica, G.U. N. 105 Del 8 Maggio 2003 - S.O. N.72. 109. Pecce M. (1993). La Modellazione Del Comportamento In Condizioni Ultime Di Colonne Composte Con Sezione Circolare Di Acciaio Riempita Di Calcestruzzo E Sottoposte A Sforzo Normale Centrato. I Workshop Italiano Sulle Costruzioni Composte, Trento, 17-18 Giugno, Pp.39-53. 110. Plumier A., Doneux C. Editors. (2001). Seismic Behaviour And Design Of Composite Steel Concrete Structures. Isbn 972-49-1890-4. Lnec Edition. Lisbon. 111. Plumier, A. (2000), European Research And Code Developments On Seismic Design Of Composite Steel Concrete Structures, Paper 1147 In Twelve World Conf. On Earthquake Eng., Auckland. 112. Plumier, A. And Doneux, C. (1998), Dynamic Tests On The Ductility Of Composite Steel- Concrete Beams, Proc. Of The Eleventh Ecee Conf., Paris. 113. Plumier, A., Doneux, C., Bouwkamp, J.G. And Plumier, C. (1998), "Slab Design In Connection Zones Of Composite Frames", Proceedings Of The 11 Th Ecee Conference, Paris. 114. Price A.M., Anderson D.: Composite Beams. In Constructional Steel Design, An International Guide - P.J. Dowling, J.E. Harding And R. Bjorhovde, P. 421-442. Elsevier Applied Science, 1992. 115. Puhali R., Smotlak I., Zandonini R. (1990): Semi-Rigid Composite Action: Experimental Analysis And A Suitable Model, Journal Of Constructional Steel Research, No. 15. 116. Ricles J.M., Paboojian S.D. (1994). Seismic Performance Of Steel-Encased Composite. Asce Journal Of Structural Engineering, Vol.120, N.8, Pp.2474-2494. 117. Roeder, C.W. (1998). Overview Of Hybrid And Composite Systems For Seismic Design In The United States. Engineering Structures, 20(4-6), 355-363. 118. Roik K., Bergmann R. (1989). Report On Eurocode 4, Clause 4.8 And 4.9. Composite Columns Harmonization Of European Construction Codes, Report Ec4/6/89, Minister Fur Raumordnung, Bauwesen Und Stadtebau Der Bundesrepublik Deutschland, Reference Number Rsii 1-6741028630 July. 119. Sanchez, L And Plumier, A. (1999), "Particularities Raised By The Evaluation Of Load Reduction Factors For The Seismic Design Of Composite Steel Concrete Structures", Proceedings Of The Sdss 99 Stability And Ductility Of Steel Structures Colloquium, Timisoara. 120. Saw H.S., Liew J.Y.R. (2000): Assessment Of Current Methods For The Design Of Composite Columns In Buildings, Journal Of Constructional Steel Research, Vol. 53. 121. Seaoc (1995). Vision 2000 - A Framework For Performance Based Design. Volumes I, Ii, Iii. Structural Engineers Association Of California, Vision 2000 Committee. 122. Shams, M. And Saadeghvaziri, M.A. (1997). The State-Of-Art Of Concrete-Filled Steel Tubular Columns. Aci Structural Journal, 94(5), 558-571.

123. Shams, M. And Saadeghvaziri, M.A. (1999). Non Linear Response Of Cft Column Under Axial Load. Aci Structural Journal, 96(6), 1009-1017. 124. Shanmugam, N.E. And Lakshmi, B. (2001). State Of Art Report On Steel-Concrete Composite Columns. Journal Of Constructional Steel Research, 57(10), 1041-1080. 125. Tschemmernegg (1999). To The Development Of Composite And Mixed Connections. Proceedings Of International Conference On Steel And Composite Structures, Delft, 24-25 February, Pp.6.1-6.10. 126. Tschemmernegg F. (1992): The Non-Linear Behaviour Of Composite Joints, Journal Of Constructional Steel Research, Vol. 21. 127. Tsujii, M., Elnashai, A.S. And Broderick, B. (1999), Experimental And Analytical Evaluation Of Behaviour Factors For Steel And Composite Frames, Report Ofr Icons Project, Imperial College London. 128. Uchida N., Tohki H. (1997).Design Of High-Rise Building Using Round Tubular Steel Composite Columns. Iabse International Conference On Composite Construction Conventional And Innovative, Innsbruck, 16-18 September. 129. Usami T., Ge H. (1994): Ductility Of Concrete-Filled Steel Box Columns Under Cyclic Loading, Journal Of Structural Engineering, Asce, Vol. 120, No. 7 (July, 1994). 130. Uy B. (1998): Concrete-Filled Fabricated Steel Box Columns For Multistorey Buildings: Behaviour And Design, Progress In Structural Engineering And Materials, Vol. 1, No. 2. 131. Varma, A.H., Ricles, J.M., Sause, R. And Le-Wu, Lu (2002). Seismic Behavior And Modeling Of High-Strength Composite Concrete-Filled Steel Tube (Cft) Beam-Columns. Journal Of Constructional Steel Research, 58(5-8), 725-758. 132. Viest I.M.: Composite Construction: Recent Past, Present And Near Future - Composite Construction In Steel And Concrete, 2 nd Ed., Easterling W.S. And Morris, W.M.K. Ed., Pp. 1-16, 1992. 133. Viest, I.M., Colaco, J.P., Furlong, R.W., Griffis, L.G., Leon, R.T. And Wyllie, L.A. (1997), Composite Construction Design For Buildings, Asce, Mcgraw-Hill. 134. Wakabayashi, M. And Minami, K. (1976). Experimental Studies On Hysteretic Characteristics Of Steel Reinforced Concrete Columns And Frames. Proceedings Of The International Symposium Of Earthquake Structural Engineering, Saint Louis, Missouri. 135. Yam L., Design Of Composite Steel-Concrete Structures - Surrey University Press, 1980. 136. Yam L.C.P., Chapman J.C.: The Inelastic Behaviour Of The Continuous Composite Beams Of Steel And Concrete - Proceedings Inst. Civ. Engrs, Vol. 53, Part 2, Pp- 487-501, 1968. 137. Yang I.L., Tagawa Y. (2000). Effect Of Joint Details For Behaviour Of Moment Resisting Steel Frames With Composite Girders-To-Shs Column. Proceedings Of The 12th World Conference On Earthquake Engineering, Wcee, Auckland. 138. Zandonini R. (1989): Semi-Rigid Composite Joints, In Structural Connections - Stability And Strength (Ed. R. Narayanan), Elsevier Applied Science, London. 139. Zandonini R., Bernuzzi C., Bursi O., (1997): Steel And Steel-Concrete Composite Joints Subjected To Seismic Actions, Proc. Of Behaviour Of Steel Structures In Seismic Areas (Kyoto, August, 1997).