Art. 91.020.VU220DGT Vulcanizzatore per gomme siliconiche od organiche, munito di pistone premigomma (escursione massima 15 mm) con termostato digitale. Piastre scaldanti in alluminio per un'ottima diffusione del calore, adatte alla maggior parte delle staffe disponibili sul mercato. Prodotto in Italia. Vulcanizer for siliconic or organic rubbers, provided with a rubberstuffing piston (maximum excursion: 15 mm) with digital heater controller. Aluminium heating plates for an optimum diffusion of heat, suitable to most molding boxes available on the market. Made in Italy. Pagina 1/5
Art. 91.020.VU140 Vulcanizzatore per gomme con piastre scaldanti tonde in alluminio. E' munito di punzone premigomma che assicura una perfetta compressione nella staffa (escursione massima del punzone 15 mm). E' inoltre dotato di termostato fino a 200 C, temporizzatore per regolare il tempo di cottura (fino a 60 minuti) e termometro per la verifica della temperatura. Prodotto italiano. Vulcanizer for rubbers with round aluminium heating plates. It is provided with rubber-stuffing punch which ensures a perfect compression in the molding box (maximum excursion of punch: 15 mm). It is also provided with a thermostat up to 200 C, timer to control the stoving time (up to 60 minutes) and thermometer to check temperature. Made in Italy. Pagina 2/5
Art. 91.021.12005 Vulcanizzatore per gomme con piastre scaldanti quadrate da mm 150 x 150. E' munito di punzone premigomma che assicura una perfetta compressione nella staffa. È inoltre dotato di termostato fino a 180 C, temporizzatore per regolare il tempo di cottura (fino a 120 minuti) e termometro per la verifica della temperatura. Prodotto italiano. Altezza massima staffe mm 70 Dimensioni esterne mm 280 x 210 x 450 Peso Kg 25,00. Vulcanizer for rubbers with mm 150 x 150 squared heating plates. It is provided with rubber-stuffing punch which ensures a perfect compression in the molding box. It is also provided with a thermostat up to 180 C, timer to control the stoving time (up to 120 minutes) and thermometer to check temperature. Made in Italy. Maximum flask height mm 70 External dimensions mm 280 x 210 x 450 Weight Kg. 25,00 Pagina 3/5
Art. 91.021.VU230PN Il vulcanizzatore VULCANAIR 230 è dotato di movimento pneumatico delle piastre scaldanti, con termostato digitale e timer per regolare i tempi di vulcanizzazione. L ingombro massimo delle staffe inseribili tra le piastre è di mm 190x190 per un apertura di 60 mm. Per un regolare funzionamento necessita di una sorgente d aria compressa a 8 bar di pressione. Non è adatto per gomme che necessitano di essere pressate (gomme organiche). The vulcanizer "VULCANAIR 230" is provided with pneumatic movement of the heating plates, with digital control of vulcanization temperature and timer to regulate vulcanizer duration. The maximum dimensions of the molding boxes which can be inserted between the plates are mm 190x190 (maximum overall dimensions) for an opening of 60 mm. For a good running it requires a compressed air supply at 8 bar pressure. It is adapted both to round and rectangular molding boxes. It is not suitable for organic rubber (NBR) which needs to be pressed. Pagina 4/5
Art. EST10 ESTRATTORE PER GOMME Con questo pratico attrezzo l'estrazione della gomma dalla staffa è resa facile e veloce. Viene inoltre del tutto eliminato il rischio di danneggiare la staffa. È fornito completo di due supporti alti mm 70 per rialzare la staffa durante il lavoro. Dimensioni mm 240 x 100 x 290h Peso Kg. 4,3 RUBBER KNOCKOUT With this practical tool, rubber knockout from the molding box is easy and fast. Moreover the risk of damaging the molding box is totally eliminated. It is supplied with two supports 70 mm high to raise the molding box during work. Dimensions mm 240 x 100 x 290h Weight Kg. 4,3 Pagina 5/5