SALES OFFICE INDIA A/10, Anagha, S.N. Road, Mulund (W) Mumbai INDIA Tel:

HANGZHOU TRANSTECNO POWER TRANSMISSIONS CO LTD Changlan Road, Fengdu Industry zone, Pngyao Town Yuhang Area, Hangzhou, 311115 - CHINA T +86 571 86 9 0 60 F +86 571 86 9 18 10 nfo-chna@transtecno.com www.transtecno.cn 015 TRANSTECNO SRL Va Cadut d Sabbuno, 11/D-E 40011 Anzola dell Emla (BO) ITALY T+39 051 64 5 811 F +39 051 73 49 43 sales@transtecno.com www.transtecno.com CATACALU0315 MA TRANSTECNO S.A.P.I. DE C.V. Av. Mundal # 176, Parque Industral JM Apodaca, Nuevo León, C.P. 66600 MÉXICO T +5 811334090 nfo@transtecno.com.mx www.transtecno.com.mx TRANSTECNO U.S.A. LLC 5440 S.W. 156th Place Mam, FL 33185 - USA Tel: +1 (305) 0-443 Fax: +1 (305) 0-5945 usaoffce@transtecno.com TRANSTECNO SRL (Branch) Va Ferrar, 7/11 41043 Fraz. Corlo Formgne (MO) - ITALY Tel. +39 059 55 75 Fax +39 059 55 74 39 sales@transtecno.com SALES OFFICE GUANGZHOU Room 401A, LeTan Buldng, No.188 TangAn Road, Tanhe Dstrct, Guangzhou Cty, 510665 - CHINA Tel:+ 86 0 387 760 57 Fax: + 86 0 387 761 7 guangzhouoffce@transtecno.com SALES OFFICE BRAZIL Rua Dr. Frere Alemão 155 / 40 - CEP. 90450-060 Auxladora Porto Alegre RS - BRAZIL Tel: +55 51 351 5447 Fax: +55 51 351 5447 Moble: +55 51 811 45 96 brazloffce@transtecno.com www.transtecno.com.br TRANSTECNO B.V. De Stuwdam, 43 3815 KM Ameroort - NETHERLANDS Tel: +31(0) 33 45 19 505 Fax: +31(0) 33 45 19 506 nfo@transtecno.nl www.transtecno.nl SALES OFFICE INDIA A/10, Anagha, S.N. Road, Mulund (W) Mumba 400080 - INDIA Tel: +91 980614698 Fax-Italy: +39 051 733 904 ndaoffce@transtecno.com SALES OFFICE FRANCE 1 Impasse des Mûrers 38300 Ruy - FRANCE Tel: +33 (0) 6 85 1 09 87 Fax-Italy: +39 051 733 904 franceoffce@transtecno.com www.transtecno.fr SALES OFFICE SOUTH KOREA D-304 Songdo BRC Smart Valley 30, Songdomrae-ro, Yeonsu-gu, Incheon, 406-840 - KOREA Tel: +8 70 888 107 Fax: +8 3 815 107 Moble: +8 10 5094 107 koreaoffce@transtecno.com www.transtecno.com SALES OFFICE OCEANIA Unt 3, 18-4 Rcketts Road, Mount Waverley 3149 Vctora - AUSTRALIA Tel: +61 9544 8005 Fax: +61 9543 8005 Moble: +61 0438 060 997 oceanaoffce@transtecno.com www.transtecno.com.au

Indce Index A Introduzone B C DE F GH I L M Appendce Indce Index Introducton A1 Motorduttor ad ngranagg clndrc CMG Motorduttor ad ass ortogonal CMB Motorduttor pendolar KFT105 Motorduttor pendolar FT Motorduttor pendolar ATS Motorduttor a vte senza fne CM/CMP Motorduttor combnat a vte senza fne CMM Motorduttor ad ngranagg clndrc monostado PU Motorduttor a vte senza fne con precoppa PU CMPU Helcal n-lne gearmotors CMG Helcal bevel gearmotors CMB Helcal parallel gearmotors KFT105 Helcal parallel gearmotors FT Helcal parallel gearmotors ATS Wormgearmotors CM/CMP Double reducton wormgearmotors CMM Sngle stage helcal gearmotors PU PU Pre-stage wormgearmotors CMPU Pag. Page Appendx M1 B1 C1 D1 E1 F1 G1 H1 I1 L1 Questo catalogo annulla e sosttusce ogn precedente edzone o revsone. C rservamo noltre l drtto d apportare modfche senza preavvso. Ths catalogue supersedes any prevous edton and revson. We reserve the rght to mplement modfcatons wthout notce. 0915A

Introduzone Introducton Indce Index Pag. Page Generaltà General nformaton A Veloctà entrata Input speed A Rapporto d rduzone Gear rato A Veloctà n uscta Output speed A Coppa rchesta Requested torque A Coppa nomnale Nomnal torque A3 Coppa trasmessa Output torque A3 Rendmento Effcency A3 Reversbltà e rreversbltà Reversblty and rreversblty A4 Potenza n entrata Input power A4 Fattore d servzo Servce factor A5 Carco radale Radal load A6 Carco assale Axal load A6 Scelta de motorduttor Selectng the gearmotors A6 Lubrfcazone Lubrcaton A8 Poszon d montaggo Mountng postons A8 Temperatura d lavoro Operatng temperature A10 Installazone e verfche Installaton and nspecton A11 Applcazon crtche Crtcal applcatons A11 Note Notes A1 Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 017A A1

Introduzone Introducton Generaltà Per avere una mglore comprensone degl argoment e de dat espost n questo catalogo proponamo la smbologa utlzzata corredandola delle nformazon d base per gungere ad una corretta selezone de motorduttor. General nformaton Informaton n ths manual s provded wth symbols n order to understand the subject matter and data. These symbols are ntended to ad the user n selectng the rght gearmotors. Veloctà entrata n 1 [mn -1 ] Input speed Rappresenta la veloctà rferta al tpo d motorzzazone prescelta ed è applcata n entrata al rduttore. Per selezon a veloctà dverse da quelle rportate consultare l ns. Servzo Tecnco. Ths s the nput speed at the gearbox related to the type of drve unt selected. When dfferent speeds are requred, contact our Techncal Servce. Rapporto d rduzone E una grandezza admensonale ed è n funzone del numero de dent degl ngranagg ntern al rduttore. Ne rduttor a vte senza fne s ottene dvdendo l numero d dent della corona per l numero de flett (Z) della vte senza fne. Da dat d catalogo s può ottenere con la relazone: Gear rato Ths value s strctly related to the sze and number of teeth gears nsde the gearbox. Ths value s obtaned n wormgearboxes by dvdng the number of wheel teeth by the number of starts (Z) of the worm. From the data gven n the catalogue, the value can be calculated usng the followng formula: n n 1 Veloctà n uscta n [mn -1 ] Output speed E la veloctà rsultante sull asse d uscta del rduttore e vene rcavata dalla relazone precedente: n Ths s the gearbox output speed calculated usng the formula gven above: n 1 I Coppa rchesta Mr Requested torque E la coppa rchesta dall applcazone ed è ndspensable per la selezone d una motorzzazone. Essa può essere comuncata dall utente oppure calcolata n base a dat d applcazone (se fornt). Ths s the torque needed for the applcaton and must be known when selectng a drve system. It can ether be provded by the user or calculated accordng to the applcaton data (f provded). A

Introduzone Introducton Coppa nomnale Mn Nomnal torque Rappresenta la coppa n uscta trasmssble dal rduttore n base alla veloctà n entrata n 1 e al rapporto d rduzone. Essa è calcolata n base ad un servzo con carco contnuo unforme corrspondente ad un fattore d servzo uguale a 1. Questo valore non è rportato nel presente catalogo ma può essere rcavato approssmatvamente con la seguente relazone fra M (coppa trasmessa) e (fattore d servzo): Ths s the output torque that can be transmtted by the gearbox accordng to nput speed n 1 and gear rato. It s calculated based on servce wth a contnuous steady load correspondng to a servce factor equal to 1. Ths value s not gven n the catalogue but can be calculated approxmately wth the followng formula between M (output torque) and (servce factor): Mn M Coppa Trasmessa M Output torque E la coppa trasmessa n uscta al rduttore. Dpende dalla potenza P 1 del motore nstallato, dal numero d gr n uscta n e dal rendmento dnamco Rd e può essere calcolata con la relazone: Ths s the gearbox s output torque. It s strctly related to power P 1 of the motor nstalled, output rpm n and dynamc effcency Rd. It can be calculated wth the followng formula: M 9550 P Rd n 1 oppure: or: M 9550 P n dove: where: P P Rd 1 Rendmento Rd; Rs Effcency I calcol delle prestazon sono stat effettuat n base al rendmento dnamco Rd de rduttor (valore ottmale che s raggunge nel funzonamento a regme dopo rodaggo). Ne rduttor combnat, l rendmento complessvo è dato dal prodotto de rendment de due rduttor, consderando però che nel secondo rduttore l rendmento dovrà essere valutato n base alla rdotta veloctà n entrata ottenuta dvdendo n 1 per l rapporto del prmo rduttore. E opportuno consderare che ne rduttor a vte senza fne s ha anche un valore d rendmento statco Rs, presente n fase d avvamento, che declassa sensblmente la coppa rsultante per cu nfluenza n modo determnante la scelta d motorzzazon destnate ad applcazon ntermttent (es. sollevament). Il valore de rendment dnamco e statco de rduttor a vte senza fne sono rportat nella tabella della sez. CM/CMP. Ne rduttor ad ngranagg CMG, CMB e PU l rendmento medo è del 94%. Effcency s calculated based on dynamc effcency Rd of the gearboxes (optmal value reached when runnng at normal speed after the break n perod). In combnaton gearboxes, overall effcency s obtaned from the combned effcency of the two gearboxes. However, keep n mnd that effcency of the second gearbox should be determned accordng to the reduced nput speed obtaned by dvdng n 1 by rato of the frst gearbox. It s mportant to remember that wormgearboxes also have statc effcency value Rs present at start-up. Ths value notably reduces the resultng torque. As a result, t must be taken nto consderaton when selectng drve systems for ntermttent operatons (e.g. lftng) as t s a determnant factor. Dynamc and statc effcency of wormgearboxes are gven n the table nto secton CM/CMP. On helcal gearboxes CMG, CMB and PU the average effcency s 94%. A3

Introduzone Introducton Reversbltà e rreversbltà La dretta conseguenza del rendmento (statco e dnamco) è la reversbltà del rduttore a vte senza fne che consste nella possbltà d fare ruotare l albero entrata tramte l applcazone d una torsone pù o meno accentuata sull albero uscta. L mpossbltà o la dffcoltà ad effettuare l azone sopra descrtta, determna l grado d reversbltà (o rreversbltà) d un rduttore. Questa caratterstca, molto sgnfcatva ne rduttor a vte senza fne, è nfluenzata da molteplc fattor qual angolo d elca (qund rapporto d trasmssone), lubrfcazone, temperatura, fntura superfcale della vte senza fne, presenza d vbrazon, ecc. In applcazon dove sono present delle traslazon è necessaro garantre una elevata reversbltà onde evtare che le nerze delle masse n movmento possano determnare punte d carco nammssbl sugl organ d trasmssone. In applcazon dove è rchesto un non rtorno del carco (es. sollevament o nastr trasportator nclnat) n assenza d un freno motore è necessaro sceglere un rduttore caratterzzato da un elevato grado d rreversbltà. Desderamo comunque evdenzare che la garanza assoluta d non rtorno è data esclusvamente dall nstallazone d un motore autofrenante o d un altro dspostvo frenante esterno. La tabella sottostante rporta a ttolo puramente ndcatvo var grad d reversbltà/rreversbltà ne rduttor a vte senza fne n funzone del rendmento dnamco Rd e statco Rs. Reversblty and rreversblty Reversblty of the wormgearbox s the drect consequence of effcency (statc and dynamc). Ths determnes whether or not the nput shaft can be rotated by applyng a certan torque on the output shaft. Whether or not ths can be done and how dffcult t actually s to do determne the degree of reversblty (or rreversblty) of a gearbox. Ths feature, qute sgnfcant n wormgearboxes, s affected by numerous factors ncludng the helx angle (therefore drve rato), lubrcaton, temperature, surface fnsh of the worm, vbratons, etc... In applcatons that nclude translatons, hgh reversblty must be guaranteed to prevent nerta of the movng parts from creatng unacceptable load peaks on the drve parts. In applcatons that requre non-return of the load (e.g. lftng or nclned conveyor belts) a gearbox wth hgh rreversblty must be chosen when a motor-brake unt s not present. However, we would lke to pont out that non-return can be totally assured only by nstallng a self-brakng motor or other external brakng devce. The table below s provded for reference purposes only. It contans the varous degrees of reversblty/rreversblty of wormgearboxes n relaton to dynamc Rd and statc Rs effcency. Rd Reversbltà e rreversbltà dnamca Dynamc reversblty and rreversblty > 0.6 Reversbltà dnamca Dynamc reversblty 0.5-0.6 Reversbltà dnamca ncerta Uncertan dynamc reversblty 0.4-0.5 Buona rreversbltà dnamca Good dynamc rreversblty <0.4 Irreversbltà dnamca Dynamc rreversblty Rs Reversbltà e rreversbltà statca Statc reversblty and rreversblty > 0.55 Reversbltà statca Statc reversblty 0.5-0.55 Reversbltà statca ncerta Uncertan statc reversblty <0.5 Irreversbltà statca Statc rreversblty Potenza n entrata P 1 Input power E la potenza motore applcata n entrata al rduttore e rferta alla veloctà n 1. Può essere calcolata come segue: Ths s the power appled by the motor at the gearbox nput n reference to speed n 1. It can be calculated wth the followng formula: P 1 M n 9550 Rd A4

Introduzone Introducton Fattore d servzo Servce factor E una grandezza admensonale che ndca l sovradmensonamento da applcare ad una determnata motorzzazone per garantre la resstenza agl urt e la durata rchesta. Le tabelle d catalogo offrono una vasta scelta d motorzzazon con fattor d servzo dfferenzat che possono soddare la maggor parte delle applcazon pù o meno gravose. Per una corretta nterpretazone de valor del fattore d servzo rportat a fanco d ogn selezone proposta, rportamo nelle tabelle seguent valor ndcatv attrbut alle class d carco A, B, C e alla durata d funzonamento gornalero h/d e al numero d avvament/ora. Defnendo la classe d carco a cu rferre l applcazone, s rcercherà nella tabella l corrspondente valore d da utlzzare nella scelta della motorzzazone pù donea. Ths value ndcates how a certan drve system s to be over-szed n order to assure the requested servce and stand up to shocks. The tables gven n the catalogue offer a wde range of drve systems wth dfferent servce factors able to saty most types of applcatons. To correctly understand servce factor values gven for each tem, approxmate values for load classes A, B and C along wth the number of hours of daly operaton h/d and number of start-ups/hours need to be known. Once the load class requred for the applcaton has been determned, locate correspondng value to be used when selectng the most sutable drve system. Tpo d carco A -Unforme fa 0.3 B -Medo fa 3 C - Forte fa 10 Type ofload A -Unform fa 0.3 B -Moderate shocks fa 3 C -Heavy shocks fa 10 fa Je Jm Je (kgm ) momento d nerza esterno rdotto all albero motore. Jm (kgm ) momento d nerza motore. Se fa > 10 nterpellare l sn. Servzo Tecnco. fa Je Jm Je (kgm ) moment of reduced external nerta at the drve-shaft Jm (kgm ) moment of nerta of motor. If fa > 10 call our Techncal Servce. A Classe d carco / Load class Carco unforme / Unform load h/d n. avvament/ora / n. start-up/hour 4 8 16 3 63 15 50 500 4 0.8 0.8 0.9 0.9 1.0 1.1 1.1 1. 1. 8 1.0 1.0 1.1 1.1 1.3 1.3 1.3 1.3 1.3 16 1.3 1.3 1.3 1.3 1.5 1.5 1.5 1.5 1.5 4 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 1.8 B Classe d carco / Load class Carco con urt moderat / Moderate shock load h/d n. avvament/ora / n. start-up/hour 4 8 16 3 63 15 50 500 4 1.0 1.0 1.0 1.0 1.3 1.3 1.3 1.3 1.3 8 1.3 1.3 1.3 1.3 1.5 1.5 1.5 1.5 1.5 16 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 1.8 4 1.8 1.8 1.8 1.8..... C Classe d carco / Load class Carco con urt fort / Heavy shock load Esempo applcazone: Nastro trasportatore attrbuble alla classe d carco B (carco con urt moderat) e prevsto per una durata d funzonamento gornalero (h/d) d 16 ore e con 8 avvament/ora. Dalla tabella rlevamo = 1.5 Applcaton example: Conveyor belt assgned to load class B (moderate shock load), to be run 16 hours a day (h/d) wth 8 start-ups/hour. The followng value s obtaned from the table = 1.5 h/d n. avvament/ora / n. start-up/hour 4 8 16 3 63 15 50 500 4 1.3 1.3 1.3 1.3 1.5 1.5 1.5 1.5 1.5 8 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 1.8 16 1.8 1.8 1.8 1.8..... 4.....5.5.5.5.5 A5

Introduzone Introducton Carco radale R; R [N] Radal load L applcazone sull albero n uscta del rduttore d pgnon, pulegge, ecc. determna delle forze radal che debbono necessaramente essere consderate per evtare sollectazon eccessve con l rscho d danneggament del rduttore stesso. Il calcolo del carco radale esterno R agente sull albero del rduttore può essere determnato come segue: Pnons, pulleys, etc appled on the output shaft of the gearboxes create radal forces that must be taken nto consderaton to avod excessve stress rskng damage to the gearbox tself. External radal load R that acts on the gearbox shaft can be calculated as follows: R 000 M kr d R dove: d [mm] kr dametro prmtvo del pgnone o della pulegga coeffcente rferto al tpo d trasmssone: kr = 1.4 ruota per catena kr = 1.1 ngranaggo kr = 1.5 -.5 pulegga per cngha a V where: d [mm] kr dameter of the pnon or pulley coeffcent n relaton to type of transmsson: kr = 1.4 sprocket wheel kr = 1.1 gear kr = 1.5 -.5 pulley for V belts E opportuno evdenzare che valor d R sono rfert a carch agent sulla mezzera dell albero lento (consderando l albero sporgente) per cu l confronto dovrà essere effettuato nelle medesme condzon. Keep n mnd that values R refer to loads that act on the centerlne of the output shaft (consderng the shaft protrudes). As a result, the value should be compared under the same condtons. Carco assale A; A [N] Axal load A volte, untamente al carco radale, può essere presente anche una forza A che agsce assalmente sull albero uscta; n questo caso consderare che l carco assale ammssble A sull albero è da consderare: At tmes, along wth the radal load, force A may be present that acts axally on the output shaft. In ths case, keep n mnd allowable axal load A that can be appled on the shaft s: A =R 0. Nel caso n cu l valore del carco assale A agente sull albero rsultasse superore ad A contattate l ns. Servzo Tecnco. If axal load A that acts on the shaft s greater than A, contact our Techncal Servce. Scelta de motorduttor Per la scelta d un motorduttore è necessaro segure la seguente procedura. 1. Per l applcazone desderata rcavare l fattore d servzo dalle tabelle a pag. A5 n base alla classe d carco, alle ore d funzonamento gornalere e al numero d avvament orar.. Se s conosce la potenza motore P rchesta, passare al punto 3); se è nota la coppa n uscta M rchesta è necessaro calcolare la potenza motore P con le formule: Selectng the gearmotors To select the requred gearmotor, perform the procedure below: 1. Determne the servce factor for the desred applcaton by referrng to the charts gven on page A5. Ths s to be done by consderng the class of load, the operatonal hours/day and the number of start-ups/ hour.. If the requred motor power output P s known, go to tem 3); f the requred output torque M s known, determne motor output P by usng the followng formulas: P M n 9550 Rd Motorduttore Gearmotor dove Rd è l rendmento dnamco (rportato a pag. D6) e n l numero d gr rchest n uscta al motorduttore. where Rd stands for the dynamc effcency (ndcated on page D6) and n ndcates the requred output rpm of the gearmotor. A6

Introduzone Introducton 3. Nelle tabelle de dat tecnc rcercare la motorzzazone n cu sa P 1 maggore o uguale a P e con rfermento a d una veloctà n /n max prossma a quella desderata, sceglere la motorzzazone n cu l fattore d servzo ndcato rsult uguale o superore a quello rcavato al punto 1). 3. Use the specfcaton chart to search for the power unt where P 1 s greater than or equal to P wth a speed n /n max that approxmates the desred one. Choose a power unt where the ndcated servce factor s equal to or greater than that calculated at pont 1). P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.18 63B4 (1400 mn -1 ) Esempo / Example: 30.0 54. 46.61 CMG013 B5 5.3 64 1.9 55.36 B5.1 73 1.6 63. B5 18.6 87 1.4 75.08 B5 Applcazone / Applcaton: Nastro trasportatore / Conveyor belt 0.18 63B4 (1400 mn -1 ) 187 8 4.4 7.5 CM040 B5/B14 140 10 3.7 10 B5/B14 93 15.5 15 B5/B14 70 19.1 0 B5/B14 56 1.7 5 B5/B14 47 5 1.7 30 B5/B14 35 3 1.3 40 B5/B14 8 39 1.0 50 B5/B14 P : 0.18 kw : 1.5 n : 3 mn -1 Motorzzazone scelta / Power unt selected: CMG013 = 63., P 1 = 0.18 kw, = 1.6 Esempo / Example: Applcazone / Applcaton: Nastro trasportatore / Conveyor belt P : 0.17 kw : 1.5 n : 45 mn -1 Motorzzazone scelta / Power unt selected: CM040 = 30, P 1 = 0.18 kw, = 1.7 A7

Introduzone Introducton Lubrfcazone I motorduttor della sere CMG, CMB, KFT105, FT, ATS, CM, CMP, CMM e PU sono fornt complet d lubrfcante sntetco vscostà 30 a lunga durata, pertanto non necesstano d manutenzone. Lubrcaton All unt szes of CMG, CMB, KFT105, FT, ATS, CM, CMP, CMM and PU seres are complete wth a long lfe synthetc lubrcant, vscosty 30 and do not requre mantenance. CMG CMB KFT105 FT ATS CM CMP CMM PU SHELL AGIP KLUBER CASTROL ESSO MOBIL Shell Omala S4 WE30 Tellum VSF30 Klubersynth GH 6 30 Alphasyn PG30 S30 Mobl Glygoyle HE 30 Nelle sezon specfche sono rportate le tabelle con le quanttà ndcatve d lubrfcante contenute e/o da mmettere. In fase d ordne è necessaro specfcare sempre la poszone d montaggo desderata. The tables contan the approxmate amount of lubrcant held and/ or to be put n. Always specfy the desred nstallaton poston at the tme of order. Poszon d montaggo Mountng postons CMG CMB M1 (B3) M (V6) M1 (B3) M (V6) M6 (B6) M6 (B6) M4 (V5) M5 (B7) M4 (V5) M5 (B7) M3 (B8) M3 (B8) A8

Introduzone Introducton A9 Poszon d montaggo Mountng postons CM KFT 105 FT M1 (B3) M1 (B3) M6 (B6) M6 (B6) M (V6) M (V6) M4 (V5) M4 (V5) M3 (B8) M5 (B7) M5 (B7) M1 (B3) M6 (B6) M (V6) M4 (V5) M3 (B8) M3 (B8) ATS M1 (B3) M6 (B6) M (V6) M4 (V5) M3 (B8) M5 (B7) M5 (B7)

Introduzone Introducton Temperatura d lavoro Operatng temperature La temperatura ambentale nflusce sulle specfche d rduttor. The envronmental temperature affects specfcatons of gearboxes. Campo d temperatura standard / Standard temperature range CMG CMB KFT105 FT ATS CM06 - CM050 CM063 - CM130 CMP PU -35 C / +50 C -35 C / +50 C -35 C / +50 C -35 C / +50 C -35 C / +50 C -5 C / +50 C -35 C / +50 C -35 C / +50 C -35 C / +50 C Camp d temperatura specal / Specal temperature range <-15 C -35 C/-5 C <-35 C >+50 C CMG CMB KFT105 FT ATS CM06 - CM050 CM063 - CM110 CM130 CMP dmezzare carch radal n uscta halve the output radal loads sostture paraolo ngresso con NBR replace nput ol seal wth NBR usare paraol n slcone (VMQ) use slcone (VMQ) ol seals usare lubrfcante per basse temperature use low temperature lubrcant usare paraol n V t o n ( F P M ) use Vton (FPM) ol seals usare lubrfcante per alte temperature use hgh temperature lubrcant PU Per temperature <0 C rferrs alle seguent note: - verfcare che l motore sa doneo al funzonamento a bassa temperatura; - asscurars che l motore possa fornre maggor coppa d avvamento a causa dell aumento d vscostà del lubrfcante; - procedere con alcun mnut d funzonamento a vuoto per garantre l ottmale lubrfcazone; For temperature <0 C refer to the followng notes: - check f the motor s sutable for low temperature; - due to the hgh vscosty of the lubrcant, check f the motor can supply hgh startng torque; - let the group run for a few mnutes wthout load to guarantee good lubrcaton; A10

Introduzone Introducton Installazone e verfche In fase d nstallazone del rduttore è opportuno verfcare che: dat rportat n targhetta corrspondano al prodotto che è sta to ordnato; le superfc d accoppamento e gl alber sano accuratamente pult e prv d ammaccature; le superfc su cu verrà nstallato l rduttore sano perfettamente pane e suffcentemente rgde; Installaton and nspecton Whle nstallng the gearbox, always make sure that: the specfcatons stamped on the ratng plate match those ndcated for the unt actually ordered; the matng surfaces and the shafts are thoroughly clean and free of dents; the surfaces where the gearbox are to be mounted on are flat and strong enough; l albero macchna e quello del rduttore sano correttamente allneat; sano stat nstallat sstem d lmtazone della coppa se s prevedono urt o blocch della macchna durante l funzonamento; sano state predsposte le necessare protezon antnfortunstche agl organ rotant; sano state create delle opportune coperture a protezone dagl agent atmoerc se l nstallazone è effettuata all aperto ed è soggetta alle ntempere; l ambente d lavoro non sa corrosvo (a meno che tale specfca non sa stata dcharata n fase d ordne al fne d predsporre l rduttore per questo utlzzo); gl eventual pgnon o pulegge montat sull albero uscta o entrata del rduttore, sano calettat correttamente n modo tale da non generare carch radal e/o assal superor a quell ammssbl; su tutt gl accoppament sa stato applcato un adeguato protettvo antossdante per prevenre eventual ossdazon da contatto; tutte le vt d fssaggo sano state serrate correttamente; per tutt rduttor grandezza CM 130 verfcare la corretta quanttà d lubrfcante n funzone della poszone d montaggo. the machne drve shaft and the gearbox shaft are perfectly algned; the requred torque lmters have been nstalled f the machne s lkely to produce shocks or blockages durng operaton; the rotary parts have been provded wth the requred safety guards; adequate weatherproof coverng has been provded f the machne s to be nstalled outdoor; the workng envronment s not exposed to corrosve agents (unless ths has been ndcated whle placng the order so that the gearbox can be adequately set up); the pnons or pulleys on the gearbox nput/output shafts are properly ftted n order not to produce radal and/or axal loads that exceed the maxmum allowable lmts; all the couplngs have been treated wth adequate rust preventatve n order to avod oxdaton provoked by contact; all the mountng screws have been securely tghtened; check the lubrcant quantty dependng on the mountng poston on all gearboxes CM 130. Applcazon crtche In tutt quest cas consultare l Servzo Tecnco utlzzo come moltplcatore; utlzzo come argano d sollevamento; utlzzo n poszon non prevste a catalogo; utlzzo n ambente con pressone dversa da quella atmoerca; utlzzo n ambente con temperature <-35 C o >+50 C In these cases please contact the Techncal Servce used to ncrease speed ; used as a host; Crtcal applcatons used n mountng postons not shown n the catalogue; use n envronment pressure other than atmospherc pressure; use n places wth temperature <-35 C or >+50 C A11

Introduzone Introducton Note/Notes A1

CMG CMG CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG CMG Pag. Page Indce Index Caratterstche tecnche Techncal features B Desgnazone Clascaton B3 Sens d rotazone Drecton of rotaton B4 Smbologa Symbols B4 Lubrfcazone Lubrcaton B4 Carch radal Radal loads B5 Dat tecnc Techncal data B6 Dmenson Dmensons B18 Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 017A B1

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Caratterstche tecnche I motorduttor ad ngranagg clndrc della sere CMG sono caratterzzat da un elevato grado d modulartà: partendo da un corpo d base è possble confgurarlo secondo le esgenze, con flanga o pede. Caratterstche comun a tutta la sere: Carcassa e flanga PAM n pressofusone d allumno per le tagle 00, 01, 0, 03 e 04. Ped e flange d uscta n ghsa; Ingranagg sempre rettfcat; Lubrfcazone permanente con olo sntetco. Techncal features The hgh degree of modularty s a desgn feature of CMG helcal n-lne gearmotors range. It s possble to set up the verson requred usng flanges or feet. The man features of CMG range are: De-cast alumnum housngs and nput flanges for szes 00, 01, 0, 03 and 04. Cast ron feet and output flanges; Ground-hardened helcal gears; Permanent synthetc ol long-lfe lubrcaton. Communty Desgn N. 100448 B

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Desgnazone Clascaton U H F H/F CMG RIDUTTORE / GEARBOX CMG 01 H65 9.81 D0 71 B14 Tpo Type Grandezza Sze Stad Stages Versone Verson Rapporto Rato Albero uscta Output shaft IEC Forma costruttva Verson CMG 00 01 0 03 04 3 U... H... F... H.../F... ved tabelle see tables ved tabelle see tables 56.. 11.. B5 B14 U H F H/F RIDUTTORE / GEARBOX CMGIS 01 U 9.81 D0 Tpo Type Grandezza Sze Stad Stages Versone Verson Rapporto Rato Albero uscta Output shaft CMGIS 01 0 03 04 3 U... H... F... H.../F... ved tabelle see tables ved tabelle see tables MOTORE / MOTOR 0.75kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. ved tabelle see tables p 4p 6p 8p 1ph 3ph 30V 30/400V 50Hz 60Hz B3

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Sens d rotazone Drecton of rotaton CMG... CMGIS.. CMG...3 CMGIS..3 Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed n [mn -1 ] Veloctà n uscta / Output speed Rapporto d rduzone / Rato P 1 Potenza n entrata / Input power M Coppa nomnale n uscta n funzone d P 1 / Output torque referred to P 1 Pn 1 Potenza nomnale n entrata / Nomnal nput power Mn Coppa nomnale n uscta n funzone d Pn 1 / Nomnal output torque referred to Pn 1 Fattore d servzo / Servce factor R [N] Carco radale ammssble n uscta / Permtted output radal load A [N] Carco assale ammssble n uscta / Permtted output axal load Lubrfcazone Tutt motorduttor nelle tagle 00, 01, 0, 03 e 04 sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton ( vscosty grade 30) makes t possble to use szes 00, 01, 0, 03 and 04 n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. B4

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Carch radal Radal loads n [mn -1 ] R [N] CMG 00 CMG 01 CMG 0 CMG 03 CMG 04 CMG 700 416 764 159 1987 379 600 437 805 1609 09 504 500 465 855 1710 3 661 400 501 91 184 395 866 50 586 1077 154 801 3353 180 653 133 554 331 3897 150 748 1406 714 359 444 10 806 1631 3467 3801 457 100 958 184 3684 4507 534 80 103 1984 3969 504 5991 60 1136 184 4368 5549 6594 40 1300 500 5000 6500 8000 10 1300 500 5000 6500 8000 Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula: When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: Rc x R CMG 00 CMG 01 CMG 0 CMG 03 CMG 04 a 73 104 117 13 150 b 53 84 9 10 115 R MAX 1300 500 5000 6500 8000 L R c R a (b +x) R MAX a, b = valor rportat nella tabella a, b = values gven n the table R R c B5

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMGIS 00 79 40 1. 5.03 30 40 1.0 6.10 187 40 0.8 7.49 156 50 0.85 8.99 138 50 0.75 10.16 116 50 0.63 1.07 105 70 0.80 13.40 9.5 70 0.71 15.14 77.1 70 0.59 18.17 64.9 70 0.50 1.58 59.6 70 0.45 3.51 55.8 70 0.43 5.10 51.7 70 0.39 7.08 43.1 70 0.33 3.49 33.3 70 0.5 4.04 31. 70 0.4 44.89 8.7 70 0. 48.86 5.4 70 0.19 55.10 56 B5/B14 63 B5/B14 71 B5/B14 80 B5/B14 * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. B11 alla pag. B17 * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page B11 to B17. Dmenson IEC / IEC Dmensons 56 B5 56 B14 63 B5 63 B14 71 B5 71 B14 80 B5 80 B14 N 80 50 95 60 110 70 130 80 M 100 65 115 75 130 85 165 100 P 10 80 140 90 160 105 00 10 D 9 11 14 19 B6

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMGIS 01 367 60.4 3.8 30 60.0 4.63 46 60 1.6 5.69 181 80 1.6 7.7 153 80 1.3 9.17 143 80 1. 9.81 1 100 1.3 11.50 118 100 1.3 11.90 101 10 1.3 13.80 95.7 10 1.3 14.6 78.4 10 1.0 17.86 73.4 10 1.0 19.07 70.6 10 0.9 19.83 59.4 10 0.78 3.56 47.4 10 0.6 9.56 39.5 10 0.5 35.47 30.5 10 0.40 45.89 8.6 10 0.37 49.00 6.3 10 0.34 53.33 3.3 10 0.30 60.15 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 * * * * * * * * * * * CMG CMGIS 013 63 B5 71 B5/B14 80 B5/B14 90 B5/B14.1 10 0.30 63. 18.6 10 0.5 75.08 15.7 10 0.1 89.17 1.4 10 0.17 113.05 10.4 10 0.14 134.7 8.1 10 0.11 173.7 6.9 10 0.09 0.16 5.4 10 0.07 61.57 4.6 10 0.06 304.00 3.6 10 0.05 393.33 3. 10 0.04 443.59 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. B11 alla pag. B17 * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page B11 to B17. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 N 95 110 70 130 80 130 95 M 115 130 85 165 100 165 115 P 140 160 105 00 10 00 140 D 11 14 19 4 B7

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMGIS 0 CMGIS 03 383 100 4. 3.66 316 100 3.4 4.43 57 100.8 5.45 190 10.5 7.39 159 10.1 8.78 141 10 1.8 9.93 17 00.8 11.01 116 00.5 1.05 106 00.3 13.1 94.6 00.1 14.81 81.9 160 1.4 17.10 76.7 160 1.3 18.6 69.7 00 1.5 0.08 58.7 00 1.3 3.85 46.8 00 1.0 9.93 39.0 00 0.85 35.91 30.1 00 0.66 46.46 8. 00 0.6 49.61 5.9 00 0.57 54.00 3.0 00 0.50 60.90 1.9 00 0.49 64.01 18.4 00 0.41 76.0 15.5 00 0.35 90.9 1. 00 0.7 114.46 10.3 00 0.3 135.95 8.0 00 0.18 175.89 6.8 00 0.15 04.69 5.3 00 0.1 64.84 4.5 00 0.10 307.80 3.5 00 0.08 398. 5 3.1 00 0.07 449.14 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. B11 alla pag. B17 * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page B11 to B17. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 N 95 110 70 130 80 130 95 M 115 130 85 165 100 165 115 P 140 160 105 00 10 00 140 D 11 14 19 4 B8

Dat tecnc Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors n 1 1400 mn -1 CMG Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMGIS 03 374 150 6.1 3.74 311 150 5.1 4.50 55 150 4. 5.48 180 4.4 6.31 177 180 3.5 7.93 154 180 3.0 9.08 18 180.5 10.93 111 50 3.0 1.60 105 50.9 13.30 91.5 80.8 15.30 76.9 80.3 18.1 7.8 80. 19.4 66. 80.0 1.15 56.0 300 1.8 4.99 45.8 300 1.5 30.57 40.9 300 1.3 34.0 36. 300 1. 38.63 31.7 300 1.0 44.18 7.3 300 0.89 51.30 3.0 300 0.75 60.80 71 B5 80 B5/B14 90 B5/B14 100 B5/B14 11 B5/B14 B B B B B B * B * B * B * B * B * B * B * B * B * * B * * B * * B * * B * * * B * * * CMG CMGIS 033 19. 300 0.64 7.83 14.4 300 0.48 97.45 1.1 300 0.40 115.74 9.9 300 0.33 140.81 8.0 300 0.7 174.6 6. 300 0.1 5.47 5.3 300 0.18 6.05 4.3 300 0.14 35.79 3.7 300 0.1 378.64 3.3 300 0.11 47.03 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 * * * * * * * * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. B = Boccola d rduzone n accao. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. B11 alla pag. B17 N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. B = Metal shaft sleeve. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page B11 to B17. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 100/11 B5 100/11 B14 N 95 110 70 130 80 130 95 180 110 M 115 130 85 165 100 165 115 15 130 P 140 160 105 00 10 00 140 50 160 D 11 14 19 4 8 B9

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMGIS 04 CMGIS 043 374 30 9.4 3.74 311 30 7.8 4.50 55 30 6.4 5.48 60 6.3 6.31 177 60 5.0 7.93 154 80 4.7 9.08 18 80 3.9 10.93 111 350 4. 1.60 105 350 4.0 13.30 91.5 40 4. 15.30 76.9 40 3.5 18.1 7.8 40 3.3 19.4 56.0 500 3.1 4.99 45.8 500.5 30.57 40.9 500. 34.0 36. 500.0 38.63 31.7 500 1.7 44.18 7.3 500 1.5 51.30 3.0 480 1. 60.80 19. 500 1.1 7.83 14.4 500 0.80 97.45 1.1 500 0.67 115.74 9.9 500 0.55 140.81 8.0 500 0.45 174.6 6. 500 0.35 5.47 5.3 500 0.30 6.05 4.3 500 0.4 35.79 3.7 500 0.1 378.64 3.3 500 0.18 47.03 71 B5 80 B5/B14 90 B5/B14 100 B5/B14 11 B5/B14 B B B B B B B B B B B B B B * B * B * B * * B * * B * * 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. B = Boccola d rduzone n accao. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. B11 alla pag. B17 N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. B = Metal shaft sleeve. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page B11 to B17. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 100/11 B5 100/11 B14 N 95 110 70 130 80 130 95 180 110 M 115 130 85 165 100 165 115 15 130 P 140 160 105 00 10 00 140 50 160 D 11 14 19 4 8 B10

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.06 56A4 79 0.3 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 16.7 6.10 B5/B14 187 3 13.6 7.49 B5/B14 156 4 14. 8.99 B5/B14 138 4 1.5 10.16 B5/B14 116 5 10.5 1.07 B5/B14 105 5 13.3 13.40 B5/B14 9.5 6 11.8 15.14 B5/B14 77.1 7 9.8 18.17 B5/B14 64.9 8 8.3 1.58 B5/B14 59.6 9 7.6 3.51 B5/B14 55.8 10 7.1 5.10 B5/B14 51.7 11 6.6 7.08 B5/B14 43.1 13 5.5 3.49 B5/B14 33.3 17 4. 4.04 B5/B14 31. 18 4.0 44.89 B5/B14 8.7 19 3.6 48.86 B5/B14 5.4 3. 55.10 B5/B14 0.09 56B4 79 3 13.5 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 4 11.1 6.10 B5/B14 187 4 9.1 7.49 B5/B14 156 5 9.4 8.99 B5/B14 138 6 8.3 10.16 B5/B14 116 7 7.0 1.07 B5/B14 105 8 8.9 13.40 B5/B14 9.5 9 7.8 15.14 B5/B14 77.1 11 6.5 18.17 B5/B14 64.9 13 5.5 1.58 B5/B14 59.6 14 5.1 3.51 B5/B14 55.8 15 4.7 5.10 B5/B14 51.7 16 4.4 7.08 B5/B14 43.1 19 3.7 3.49 B5/B14 33.3 5.8 4.04 B5/B14 31. 6.6 44.89 B5/B14 8.7 9.4 48.86 B5/B14 5.4 3. 55.10 B5/B14 0.1 63A4 30.5 36 3.3 45.89 CMG01 B5 (1400 mn -1 ) 8.6 39 3.1 49.00 B5 6.3 4.9 53.33 B5 3.3 47.5 60.15 B5.1 49.5 63. CMG013 B5 18.6 58.1 75.08 B5 15.7 69 1.7 89.17 B5 1.4 87 1.4 113.05 B5 10.4 103 1. 134.7 B5 8.1 134 0.9 173.7 B5 6.9 156 0.8 0.16 B5 5.4 171 0.7 61.57 B5 4.6 171 0.7 304.00 B5 3.6 171 0.7 393.33 B5 3. 171 0.7 443.59 B5 1.9 49 4.1 64.01 CMG03 B5 18.4 58 3.4 76.0 B5 15.5 69.9 90.9 B5 1. 88.3 114.46 B5 10.3 105 1.9 135.95 B5 8.0 135 1.5 175.89 B5 6.8 157 1.3 04.69 B5 5.3 04 1.0 64.84 B5 4.5 37 0.8 307.80 B5 3.5 85 0.7 398.5 B5 3.1 85 0.7 449.14 B5 19. 56 5.4 7.83 CMG033 B5 14.4 75 4.0 97.45 B5 1.1 89 3.4 115.74 B5 9.9 108.8 140.81 B5 8.0 134. 174.6 B5 6. 173 1.7 5.47 B5 5.3 0 1.5 6.05 B5 4.3 51 1. 35.79 B5 3.7 91 1.0 378.64 B5 3.3 39 0.9 47.03 B5 CMG 0.1 63A4 79 4 10.1 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 5 8.3 6.10 B5/B14 187 6 6.8 7.49 B5/B14 156 7 7.1 8.99 B5/B14 138 8 6.3 10.16 B5/B14 116 9 5.3 1.07 B5/B14 105 11 6.7 13.40 B5/B14 9.5 1 5.9 15.14 B5/B14 77.1 14 4.9 18.17 B5/B14 64.9 17 4.1 1.58 B5/B14 59.6 18 3.8 3.51 B5/B14 55.8 0 3.5 5.10 B5/B14 51.7 1 3.3 7.08 B5/B14 43.1 6.7 3.49 B5/B14 33.3 33.1 4.04 B5/B14 31. 35.0 44.89 B5/B14 8.7 38 1.8 48.86 B5/B14 5.4 43 1.6 55.10 B5/B14 59.4 19 6.5 3.56 CMG01 B5 47.4 3 5. 9.56 B5 39.5 8 4.3 35.47 B5 19. 56 8.9 7.83 CMG043 B5 14.4 75 6.7 97.45 B5 1.1 89 5.6 115.74 B5 9.9 108 4.6 140.81 B5 8.0 134 3.7 174.6 B5 6. 173.9 5.47 B5 5.3 0.5 6.05 B5 4.3 51.0 35.79 B5 3.7 91 1.7 378.64 B5 3.3 39 1.5 47.03 B5 N.B. Verfcare sempre che la coppa M utlzzata non ecceda l valore ndcato nelle caselle n grgo N.B. Please check that the output torque M does not exceed the value n the grey areas B11

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.18 63B4 79 6 6.8 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 7 5.6 6.10 B5/B14 187 9 4.5 7.49 B5/B14 156 11 4.7 8.99 B5/B14 138 1 4. 10.16 B5/B14 116 14 3.5 1.07 B5/B14 105 16 4.4 13.40 B5/B14 9.5 18 3.9 15.14 B5/B14 77.1 1 3.3 18.17 B5/B14 64.9 5.8 1.58 B5/B14 59.6 8.5 3.51 B5/B14 55.8 30.4 5.10 B5/B14 51.7 3. 7.08 B5/B14 43.1 38 1.8 3.49 B5/B14 33.3 50 1.4 4.04 B5/B14 31. 53 1.3 44.89 B5/B14 8.7 58 1. 48.86 B5/B14 5.4 65 1.1 55.10 B5/B14 78.4 1 5.7 17.86 CMG01 B5 73.4 5.3 19.07 B5 70.6 3 5.1 19.83 B5 59.4 8 4.3 3.56 B5 47.4 35 3.4 9.56 B5 39.5 4.9 35.47 B5 30.5 54. 45.89 B5 8.6 58.1 49.00 B5 6.3 63 1.9 53.33 B5 3.3 71 1.7 60.15 B5.1 73 1.6 63. CMG013 B5 18.6 87 1.4 75.08 B5 15.7 103 1. 89.17 B5 1.4 130 0.9 113.05 B5 3.0 7.8 60.90 CMG0 B5 1.9 74.7 64.01 CMG03 B5 18.4 88.3 76.0 B5 15.5 104 1.9 90.9 B5 1. 13 1.5 114.46 B5 10.3 157 1.3 135.95 B5 8.0 03 1.0 175.89 B5 6.8 36 0.8 04.69 B5 19. 84 3.6 7.83 CMG033 B5 14.4 11.7 97.45 B5 1.1 134. 115.74 B5 9.9 163 1.8 140.81 B5 8.0 01 1.5 174.6 B5 6. 60 1. 5.47 B5 5.3 30 1.0 6.05 B5 19. 84 5.9 7.83 CMG043 B5 14.4 11 4.4 97.45 B5 1.1 134 3.7 115.74 B5 9.9 163 3.1 140.81 B5 8.0 01.5 174.6 B5 6. 60 1.9 5.47 B5 5.3 30 1.7 6.05 B5 4.3 376 1.3 35.79 B5 3.7 437 1.1 378.64 B5 3.3 493 1.0 47.03 B5 0.5 71A4 79 8 4.9 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 10 4.0 6.10 B5/B14 187 1 3.3 7.49 B5/B14 156 15 3.4 8.99 B5/B14 138 17 3.0 10.16 B5/B14 116 0.5 1.07 B5/B14 105 3. 13.40 B5/B14 9.5 5.8 15.14 B5/B14 77.1 30.4 18.17 B5/B14 64.9 35.0 1.58 B5/B14 59.6 38 1.8 3.51 B5/B14 55.8 41 1.7 5.10 B5/B14 51.7 44 1.6 7.08 B5/B14 43.1 53 1.3 3.49 B5/B14 33.3 69 1.0 4.04 B5/B14 31. 73 1.0 44.89 B5/B14 8.7 80 0.9 48.86 B5/B14 5.4 90 0.8 55.10 B5/B14 367 6 9.6 3.8 CMG01 B5/B14 30 8 7.9 4.63 B5/B14 46 9 6.4 5.69 B5/B14 181 13 6.3 7.7 B5/B14 153 15 5.3 9.17 B5/B14 143 16 5.0 9.81 B5/B14 1 19 5.3 11.50 B5/B14 118 19 5.1 11.90 B5/B14 101 3 5.3 13.80 B5/B14 95.7 4 5.0 14.6 B5/B14 78.4 9 4.1 17.86 B5/B14 73.4 31 3.8 19.07 B5/B14 70.6 3 3.7 19.83 B5/B14 59.4 39 3.1 3.56 B5/B14 47.4 48.5 9.56 B5/B14 39.5 58.1 35.47 B5/B14 30.5 75 1.6 45.89 B5/B14 8.6 80 1.5 49.00 B5/B14 6.3 87 1.4 53.33 B5/B14 3.3 98 1. 60.15 B5/B14.1 101 1. 63. CMG013 B5/B14 18.6 10 1.0 75.08 B5/B14 15.7 143 0.8 89.17 B5/B14 383 6 16.7 3.66 CMG0 B5/B14 316 7 13.8 4.43 B5/B14 57 9 11. 5.45 B5/B14 189 1 9.9 7.39 B5/B14 160 14 8.4 8.78 B5/B14 141 16 7.4 9.93 B5/B14 17 18 11.1 11.01 B5/B14 116 0 10.1 1.05 B5/B14 106 9. 13.1 B5/B14 94.6 4 8.3 14.81 B5/B14 81.9 8 5.7 17.10 B5/B14 76.7 30 5.4 18.6 B5/B14 69.7 33 6.1 0.08 B5/B14 58.7 39 5.1 3.85 B5/B14 46.8 49 4.1 9.93 B5/B14 39.0 59 3.4 35.91 B5/B14 30.1 76.6 46.46 B5/B14 8. 81.5 49.61 B5/B14 5.9 88.3 54.00 B5/B14 3.0 100.0 60.90 B5/B14 B1

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 71A4 1.9 103 1.9 64.01 CMG03 B5/B14 (1400 mn -1 ) 18.4 1 1.6 76.0 B5/B14 15.5 145 1.4 90.9 B5/B14 1. 183 1.1 114.46 B5/B14 10.3 18 0.9 135.95 B5/B14 0.37 31.7 7 4.1 44.18 CMG03 B5 7.3 84 3.6 51.30 B5 19. 117.6 7.83 CMG033 B5/B14 14.4 156 1.9 97.45 B5/B14 1.1 186 1.6 115.74 B5/B14 9.9 6 1.3 140.81 B5/B14 8.0 79 1.1 174.6 B5/B14 6. 361 0.8 5.47 B5/B14 19. 117 4.3 7.83 CMG043 B5/B14 14.4 156 3. 97.45 B5/B14 1.1 186.7 115.74 B5/B14 9.9 6. 140.81 B5/B14 8.0 79 1.8 174.6 B5/B14 6. 361 1.4 5.47 B5/B14 5.3 40 1. 6.05 B5/B14 4.3 5 1.0 35.79 B5/B14 3.7 607 0.8 378.64 B5/B14 71B4 79 1 3.3 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 15.7 6.10 B5/B14 187 18. 7.49 B5/B14 156.3 8.99 B5/B14 138 5.0 10.16 B5/B14 116 9 1.7 1.07 B5/B14 105 3. 13.40 B5/B14 9.5 37 1.9 15.14 B5/B14 77.1 44 1.6 18.17 B5/B14 64.9 5 1.3 1.58 B5/B14 59.6 57 1. 3.51 B5/B14 55.8 61 1. 5.10 B5/B14 51.7 66 1.1 7.08 B5/B14 43.1 79 0.9 3.49 B5/B14 367 9 6.5 3.8 CMG01 B5/B14 30 11 5.3 4.63 B5/B14 46 14 4.4 5.69 B5/B14 181 19 4.3 7.7 B5/B14 153 3.6 9.17 B5/B14 143 4 3.4 9.81 B5/B14 1 8 3.6 11.50 B5/B14 118 9 3.5 11.90 B5/B14 101 33 3.6 13.80 B5/B14 95.7 35 3.4 14.6 B5/B14 78.4 43.8 17.86 B5/B14 73.4 46.6 19.07 B5/B14 70.6 48.5 19.83 B5/B14 59.4 57.1 3.56 B5/B14 47.4 7 1.7 9.56 B5/B14 39.5 86 1.4 35.47 B5/B14 30.5 111 1.1 45.89 B5/B14 8.6 119 1.0 49.00 B5/B14 6.3 19 0.9 53.33 B5/B14 3.3 146 0.8 60.15 B5/B14 0.37 71B4.1 150 0.8 63. CMG013 B5/B14 (1400 mn -1 ) 383 9 11.3 3.66 CMG0 B5/B14 316 11 9.3 4.43 B5/B14 57 13 7.6 5.45 B5/B14 189 18 6.7 7.39 B5/B14 160 1 5.6 8.78 B5/B14 141 4 5.0 9.93 B5/B14 17 7 7.5 11.01 B5/B14 116 9 6.8 1.05 B5/B14 106 3 6. 13.1 B5/B14 94.6 36 5.6 14.81 B5/B14 81.9 41 3.9 17.10 B5/B14 76.7 44 3.6 18.6 B5/B14 69.7 49 4.1 0.08 B5/B14 58.7 58 3.5 3.85 B5/B14 46.8 73.8 9.93 B5/B14 39.0 87.3 35.91 B5/B14 30.1 113 1.8 46.46 B5/B14 8. 10 1.7 49.61 B5/B14 5.9 131 1.5 54.00 B5/B14 3.0 148 1.4 60.90 B5/B14 1.9 15 1.3 64.01 CMG03 B5/B14 18.4 180 1.1 76.0 B5/B14 15.5 14 0.9 90.9 B5/B14 374 9 16.5 3.74 CMG03 B5 311 11 13.7 4.50 B5 55 13 11.3 5.48 B5 15 11.8 6.31 B5 177 19 9.4 7.93 B5 154 8. 9.08 B5 18 6 6.8 10.93 B5 111 31 8. 1.60 B5 105 3 7.8 13.30 B5 91.5 37 7.6 15.30 B5 76.9 44 6.3 18.1 B5 7.8 47 6.0 19.4 B5 66. 51 5.5 1.15 B5 56.0 61 5.0 4.99 B5 45.8 74 4.0 30.57 B5 40.9 83 3.6 34.0 B5 36. 94 3. 38.63 B5 31.7 107.8 44.18 B5 7.3 14.4 51.30 B5 3.0 147.0 60.80 B5 19. 173 1.7 7.83 CMG033 B5/B14 14.4 31 1.3 97.45 B5/B14 1.1 75 1.1 115.74 B5/B14 9.9 334 0.9 140.81 B5/B14 19. 173.9 7.83 CMG043 B5/B14 14.4 31. 97.45 B5/B14 1.1 75 1.8 115.74 B5/B14 9.9 334 1.5 140.81 B5/B14 8.0 413 1. 174.6 B5/B14 6. 535 0.9 5.47 B5/B14 CMG B13

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 80A4 79 18. 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 1.8 6.10 B5/B14 187 7 1.5 7.49 B5/B14 156 3 1.5 8.99 B5/B14 138 37 1.4 10.16 B5/B14 116 43 1. 1.07 B5/B14 105 48 1.5 13.40 B5/B14 9.5 55 1.3 15.14 B5/B14 77.1 65 1.1 18.17 B5/B14 64.9 78 0.9 1.58 B5/B14 59.6 85 0.8 3.51 B5/B14 3.0 19 0.9 60.90 B5/B14 367 14 4.4 3.8 CMG01 B5/B14 30 17 3.6 4.63 B5/B14 46 0.9 5.69 B5/B14 181 8.9 7.7 B5/B14 153 33.4 9.17 B5/B14 143 35.3 9.81 B5/B14 1 41.4 11.50 B5/B14 118 43.3 11.90 B5/B14 101 50.4 13.80 B5/B14 95.7 53.3 14.6 B5/B14 78.4 64 1.9 17.86 B5/B14 73.4 69 1.7 19.07 B5/B14 70.6 71 1.7 19.83 B5/B14 59.4 85 1.4 3.56 B5/B14 47.4 106 1.1 9.56 B5/B14 39.5 18 0.9 35.47 B5/B14 383 13 7.6 3.66 CMG0 B5/B14 316 16 6.3 4.43 B5/B14 57 0 5.1 5.45 B5/B14 189 7 4.5 7.39 B5/B14 160 3 3.8 8.78 B5/B14 141 36 3.4 9.93 B5/B14 17 40 5.0 11.01 B5/B14 116 43 4.6 1.05 B5/B14 106 48 4. 13.1 B5/B14 94.6 53 3.8 14.81 B5/B14 81.9 6.6 17.10 B5/B14 76.7 66.4 18.6 B5/B14 69.7 7.8 0.08 B5/B14 58.7 86.3 3.85 B5/B14 46.8 108 1.9 9.93 B5/B14 39.0 19 1.5 35.91 B5/B14 30.1 167 1. 46.46 B5/B14 8. 179 1.1 49.61 B5/B14 5.9 194 1.0 54.00 B5/B14 3.0 19 0.9 60.90 B5/B14 1.9 6 0.9 64.01 CMG03 B5/B14 374 13 11.1 3.74 CMG03 B5/B14 311 16 9. 4.50 B5/B14 55 0 7.6 5.48 B5/B14 3 7.9 6.31 B5/B14 177 9 6.3 7.93 B5/B14 154 33 5.5 9.08 B5/B14 18 39 4.6 10.93 B5/B14 111 45 5.5 1.60 B5/B14 105 48 5. 13.30 B5/B14 91.5 55 5.1 15.30 B5/B14 76.9 66 4.3 18.1 B5/B14 0.55 80A4 7.8 69 4.0 19.4 CMG03 B5/B14 (1400 mn -1 ) 66. 76 3.7 1.15 B5/B14 56.0 90 3.3 4.99 B5/B14 45.8 110.7 30.57 B5/B14 40.9 13.4 34.0 B5/B14 36. 139. 38.63 B5/B14 31.7 159 1.9 44.18 B5/B14 7.3 185 1.6 51.30 B5/B14 3.0 19 1.4 60.80 B5/B14 0.75 19. 57 1. 7.83 CMG033 B5/B14 14.4 344 0.9 97.45 B5/B14 3.0 19. 60.80 CMG04 B5/B14 19. 57 1.9 7.83 CMG043 B5/B14 14.4 344 1.5 97.45 B5/B14 1.1 408 1. 115.74 B5/B14 9.9 497 1.0 140.81 B5/B14 9.9 497 1.0 140.81 B5/B14 8.0 615 0.8 174.6 B5/B14 80B4 79 5 1.6 5.03 CMG00 B5/B14 (1400 mn -1 ) 30 30 1.3 6.10 B5/B14 187 37 1.1 7.49 B5/B14 156 44 1.1 8.99 B5/B14 138 50 1.0 10.16 B5/B14 116 59 0.8 1.07 B5/B14 105 66 1.1 13.40 B5/B14 9.5 74 0.9 15.14 B5/B14 77.1 89 0.8 18.17 B5/B14 367 19 3. 3.8 CMG01 30 3.6 4.63 B5/B14 46 8.1 5.69 B5/B14 181 38.1 7.7 B5/B14 153 45 1.8 9.17 B5/B14 143 48 1.7 9.81 B5/B14 1 56 1.8 11.50 B5/B14 118 58 1.7 11.90 B5/B14 101 68 1.8 13.80 B5/B14 95.7 7 1.7 14.6 B5/B14 78.4 88 1.4 17.86 B5/B14 73.4 94 1.3 19.07 B5/B14 70.6 97 1. 19.83 B5/B14 59.4 116 1.0 3.56 B5/B14 383 18 5.6 3.66 CMG0 B5/B14 316 4.6 4.43 B5/B14 57 7 3.7 5.45 B5/B14 189 36 3.3 7.39 B5/B14 160 43.8 8.78 B5/B14 141 49.5 9.93 B5/B14 17 54 3.7 11.01 B5/B14 116 59 3.4 1.05 B5/B14 106 65 3.1 13.1 B5/B14 94.6 73.8 14.81 B5/B14 81.9 84 1.9 17.10 B5/B14 76.7 90 1.8 18.6 B5/B14 69.7 99.0 0.08 B5/B14 58.7 117 1.7 3.85 B5/B14 46.8 147 1.4 9.93 B5/B14 39.0 176 1.1 35.91 B5/B14 B14

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.75 80B4 30.1 8 0.9 46.46 CMG0 B5/B14 (1400 mn -1 ) 8. 44 0.8 49.61 B5/B14 5.9 65 0.8 54.00 B5/B14 1.1 374 18 8. 3.74 CMG03 B5/B14 311 6.8 4.50 B5/B14 55 7 5.6 5.48 B5/B14 31 5.8 6.31 B5/B14 177 39 4.6 7.93 B5/B14 154 45 4.0 9.08 B5/B14 18 54 3.4 10.93 B5/B14 111 6 4.0 1.60 B5/B14 105 65 3.8 13.30 B5/B14 91.5 75 3.7 15.30 B5/B14 76.9 89 3.1 18.1 B5/B14 7.8 94 3.0 19.4 B5/B14 66. 104.7 1.15 B5/B14 56.0 13.4 4.99 B5/B14 45.8 150.0 30.57 B5/B14 40.9 168 1.8 34.0 B5/B14 36. 190 1.6 38.63 B5/B14 31.7 17 1.4 44.18 B5/B14 7.3 5 1. 51.30 B5/B14 3.0 99 1.0 60.80 B5/B14 374 18 1.5 3.74 CMG04 B5/B14 311 10.4 4.50 B5/B14 55 7 8.5 5.48 B5/B14 31 8.4 6.31 B5/B14 177 39 6.7 7.93 B5/B14 154 45 6.3 9.08 B5/B14 18 54 5. 10.93 B5/B14 111 6 5.7 1.60 B5/B14 105 65 5.4 13.30 B5/B14 91.5 75 5.6 15.30 B5/B14 76.9 89 4.7 18.1 B5/B14 7.8 94 4.4 19.4 B5/B14 56.0 13 4.1 4.99 B5/B14 45.8 150 3.3 30.57 B5/B14 40.9 168 3.0 34.0 B5/B14 36. 190.6 38.63 B5/B14 31.7 17.3 44.18 B5/B14 7.3 5.0 51.30 B5/B14 3.0 99 1.6 60.80 B5/B14 19. 350 1.4 7.83 CMG043 B5/B14 14.4 469 1.1 97.45 B5/B14 1.1 557 0.9 115.74 B5/B14 90S4 367 8. 3.8 CMG01 B5/B14 (1400 mn -1 ) 30 33 1.8 4.63 B5/B14 46 41 1.5 5.69 B5/B14 181 56 1.4 7.7 B5/B14 153 66 1. 9.17 B5/B14 143 71 1.1 9.81 B5/B14 1 83 1. 11.50 B5/B14 118 86 1. 11.90 B5/B14 101 99 1. 13.80 B5/B14 95.7 105 1.1 14.6 B5/B14 78 19 0.9 17.86 B5/B14 73 137 0.9 19.07 B5/B14 70.6 143 0.8 19.83 B5/B14 1.1 90S4 383 6 3.8 3.66 CMG0 B5/B14 (1400 mn -1 ) 316 3 3.1 4.43 B5/B14 57 39.5 5.45 B5/B14 189 53.3 7.39 B5/B14 160 63 1.9 8.78 B5/B14 141 7 1.7 9.93 B5/B14 17 79.5 11.01 B5/B14 116 87.3 1.05 B5/B14 106 95.1 13.1 B5/B14 94.6 107 1.9 14.81 B5/B14 81.9 13 1.3 17.10 B5/B14 76.7 13 1. 18.6 B5/B14 69.7 145 1.4 0.08 B5/B14 58.7 17 1. 3.85 B5/B14 46.8 16 0.9 9.93 B5/B14 39.0 59 0.8 35.91 B5/B14 1.5 374 7 5.6 3.74 CMG03 B5/B14 311 3 4.6 4.50 B5/B14 55 39 3.8 5.48 B5/B14 45 4.0 6.31 B5/B14 177 57 3. 7.93 B5/B14 154 65.8 9.08 B5/B14 18 79.3 10.93 B5/B14 111 91.8 1.60 B5/B14 105 96.6 13.30 B5/B14 91.5 110.5 15.30 B5/B14 76.9 131.1 18.1 B5/B14 7.8 139.0 19.4 B5/B14 66. 15 1.8 1.15 B5/B14 56.0 180 1.7 4.99 B5/B14 45.8 0 1.4 30.57 B5/B14 40.9 46 1. 34.0 B5/B14 36. 78 1.1 38.63 B5/B14 31.7 318 0.9 44.18 B5/B14 374 7 8.5 3.74 CMG04 B5/B14 311 3 7.1 4.50 B5/B14 55 39 5.8 5.48 B5/B14 45 5.7 6.31 B5/B14 177 57 4.6 7.93 B5/B14 154 65 4.3 9.08 B5/B14 18 79 3.6 10.93 B5/B14 111 91 3.9 1.60 B5/B14 105 96 3.7 13.30 B5/B14 91.5 110 3.8 15.30 B5/B14 76.9 131 3. 18.1 B5/B14 7.8 139 3.0 19.4 B5/B14 56.0 180.8 4.99 B5/B14 45.8 0.3 30.57 B5/B14 40.8 47.0 34.30 B5/B14 36. 78 1.8 38.63 B5/B14 31.7 318 1.6 44.18 B5/B14 7.3 370 1.4 51.30 B5/B14 3.0 438 1.1 60.80 B5/B14 19. 514 1.0 7.83 CMG043 B5/B14 90L4 367 38 1.6 3.8 CMG01 B5/B14 (1400 mn -1 ) 30 45 1.3 4.63 B5/B14 46 56 1.1 5.69 B5/B14 181 76 1.1 7.7 B5/B14 153 90 0.9 9.17 B5/B14 CMG B15

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 1.5 90L4 383 36.8 3.66 CMG0 B5/B14 (1400 mn -1 ) 316 44.3 4.43 B5/B14 57 54 1.9 5.45 B5/B14 189 73 1.7 7.39 B5/B14 160 86 1.4 8.78 B5/B14 141 98 1. 9.93 B5/B14 17 108 1.8 11.01 B5/B14 116 118 1.7 1.05 B5/B14 106 130 1.5 13.1 B5/B14 94.6 145 1.4 14.81 B5/B14 81.9 168 1.0 17.10 B5/B14 76.7 179 0.9 18.6 B5/B14 69.7 197 1.0 0.08 B5/B14 58.7 34 0.9 3.85 B5/B14 1.85 374 37 4.1 3.74 CMG03 B5/B14 311 44 3.4 4.50 B5/B14 55 54.8 5.48 B5/B14 6.9 6.31 B5/B14 177 78.3 7.93 B5/B14 154 89.0 9.08 B5/B14 18 107 1.7 10.93 B5/B14 111 14.0 1.60 B5/B14 105 131 1.9 13.30 B5/B14 91.5 150 1.9 15.30 B5/B14 76.9 179 1.6 18.1 B5/B14 7.8 189 1.5 19.4 B5/B14 66. 08 1.3 1.15 B5/B14 56.0 45 1. 4.99 B5/B14 45.8 300 1.0 30.57 B5/B14 40.9 336 0.9 34.0 B5/B14 36. 379 0.8 38.63 B5/B14 374 37 6.3 3.74 CMG04 B5/B14 311 44 5. 4.50 B5/B14 55 54 4.3 5.48 B5/B14 6 4. 6.31 B5/B14 177 78 3.3 7.93 B5/B14 154 89 3.1 9.08 B5/B14 18 107.6 10.93 B5/B14 111 14.8 1.60 B5/B14 105 131.7 13.30 B5/B14 91.5 150.8 15.30 B5/B14 76.9 179.3 18.1 B5/B14 7.8 189. 19.4 B5/B14 56.0 45.0 4.99 B5/B14 45.8 300 1.7 30.57 B5/B14 40.9 336 1.5 34.0 B5/B14 36. 379 1.3 38.63 B5/B14 31.7 434 1. 44.18 B5/B14 7.3 504 1.0 51.30 B5/B14 90LB4 367 46 1.3 3.8 CMG01 B5/B14 (1400 mn -1 ) 30 56 1.1 4.63 B5/B14 1.85 90LB4 106 160 1. 13.1 CMG0 B5/B14 (1400 mn -1 ) 94.6 179 1.1 14.81 B5/B14 81.9 07 0.8 17.10 B5/B14. 374 45 3.3 3.74 CMG03 B5/B14 311 55.7 4.50 B5/B14 55 66.3 5.48 B5/B14 76.4 6.31 B5/B14 177 96 1.9 7.93 B5/B14 154 110 1.6 9.08 B5/B14 18 13 1.4 10.93 B5/B14 111 153 1.6 1.60 B5/B14 105 161 1.6 13.30 B5/B14 91.5 185 1.5 15.30 B5/B14 76.9 1 1.3 18.1 B5/B14 7.8 33 1. 19.4 B5/B14 66. 56 1.1 1.15 B5/B14 56.0 303 1.0 4.99 B5/B14 45.8 370 0.8 30.57 B5/B14 374 45 5.1 3.74 CMG04 B5/B14 311 55 4. 4.50 B5/B14 55 66 3.5 5.48 B5/B14 76 3.4 6.31 B5/B14 177 96.7 7.93 B5/B14 154 110.5 9.08 B5/B14 18 13.1 10.93 B5/B14 111 153.3 1.60 B5/B14 105 161. 13.30 B5/B14 91.5 185.3 15.30 B5/B14 76.9 1 1.9 18.1 B5/B14 7.8 33 1.8 19.4 B5/B14 56.0 303 1.7 4.99 B5/B14 45.8 370 1.3 30.57 B5/B14 40.9 414 1. 34.0 B5/B14 36. 468 1.1 38.63 B5/B14 31.7 535 0.9 44.18 B5/B14 7.3 61 0.8 51.30 B5/B14 100LA4 374 54.8 3.74 CMG03 B5/B14 (1400 mn -1 ) 311 65.3 4.50 B5/B14 55 79 1.9 5.48 B5/B14 91.0 6.31 B5/B14 177 114 1.6 7.93 B5/B14 154 131 1.4 9.08 B5/B14 18 157 1.1 10.93 B5/B14 111 18 1.4 1.60 B5/B14 105 19 1.3 13.30 B5/B14 91.5 0 1.3 15.30 B5/B14 76.9 6 1.1 18.1 B5/B14 7.8 77 1.0 19.4 B5/B14 66. 305 0.9 1.15 B5/B14 56.0 360 0.8 4.99 B5/B14 B16 383 44.3 3.66 CMG0 B5/B14 316 54 1.9 4.43 B5/B14 57 66 1.5 5.45 B5/B14 189 90 1.3 7.39 B5/B14 160 106 1.1 8.78 B5/B14 141 10 1.0 9.93 B5/B14 17 133 1.5 11.01 B5/B14 116 146 1.4 1.05 B5/B14 374 54 4.3 3.74 CMG04 B5/B14 311 65 3.5 4.50 B5/B14 55 79.9 5.48 B5/B14 91.9 6.31 B5/B14 177 114.3 7.93 B5/B14 154 131.1 9.08 B5/B14 18 157 1.8 10.93 B5/B14 111 18 1.9 1.60 B5/B14 105 19 1.8 13.30 B5/B14 91.5 0 1.9 15.30 B5/B14 76.9 6 1.6 18.1 B5/B14 7.8 77 1.5 19.4 B5/B14

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M. 100LA4 56.0 360 1.4 4.99 CMG04 B5/B14 (1400 mn -1 ) 45.8 440 1.1 30.57 B5/B14 40.8 494 1.0 34.30 B5/B14 36. 557 0.9 38.63 B5/B14 3 100LB4 374 74.0 3.74 CMG03 B5/B14 (1400 mn -1 ) 311 88 1.7 4.50 B5/B14 55 108 1.4 5.48 B5/B14 14 1.5 6.31 B5/B14 177 156 1. 7.93 B5/B14 154 178 1.0 9.08 B5/B14 18 15 0.8 10.93 B5/B14 111 48 1.0 1.60 B5/B14 105 61 1.0 13.30 B5/B14 91.5 301 0.9 15.30 B5/B14 374 74 3.1 3.74 CMG04 B5/B14 311 88.6 4.50 B5/B14 55 108.1 5.48 B5/B14 14.1 6.31 B5/B14 177 156 1.7 7.93 B5/B14 154 178 1.6 9.08 B5/B14 18 15 1.3 10.93 B5/B14 111 48 1.4 1.60 B5/B14 105 61 1.3 13.30 B5/B14 9 301 1.4 15.30 B5/B14 77 358 1. 18.1 B5/B14 73 378 1.1 19.4 B5/B14 56 491 1.0 4.99 B5/B14 46 601 0.8 30.57 B5/B14 4 11M4 374 98 1.5 3.74 CMG03 B5/B14 (1400 mn -1 ) 311 118 1.3 4.50 B5/B14 55 144 1.0 5.48 B5/B14 165 1.1 6.31 B5/B14 177 08 0.9 7.93 B5/B14 374 98.3 3.74 CMG04 B5/B14 311 118 1.9 4.50 B5/B14 55 144 1.6 5.48 B5/B14 165 1.6 6.31 B5/B14 177 08 1.3 7.93 B5/B14 154 38 1. 9.08 B5/B14 18 86 1.0 10.93 B5/B14 111 330 1.1 1.60 B5/B14 105 348 1.0 13.30 B5/B14 91.5 401 1.0 15.30 B5/B14 76.9 477 0.9 18.1 B5/B14 7.8 504 0.8 19.4 B5/B14 56.0 655 0.8 4.99 B5/B14 CMG B17

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson CMG 00 U Dmensons CMG 00 U CMGIS 00 U 40 143 1) /153 ) 40 140 30 9 81.5 n 5 M6x14 55 1 44 0.5.5 11.9 1) 11 Kg 3. ) Kg 3.0 50 h7 64 78 1) IEC 63/71, ) IEC 80 Flanga entrata Input flange B6 Albero uscta Output shaft 18.5 5 6 M6 16 h6 0 h6 16 5 M6 14 h6 Albero entrata Input shaft 1 B18

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 00 H.. CMG 00 H.. 40 143 1) /153 ) CMGIS 00 H.. 40 140 30 9 81.5 CMG 1 X P Q R S S.9 1) P Q Kg 3. ) R Kg 3.0 1 X U Z V 1) IEC 63/71, P ) IEC 80 Q R S Kg P Q R S Kg U Z V Flanga entrata Input flange B6 Albero uscta Output shaft 18.5 5 6 M6 16 h6 0 h6 16 5 Albero entrata Input shaft 1 M6 14 h6 Versone H / H Verson CMG CMGIS 00 Pede / Foot P Q R S U V X Z Tpo / Type Peso / Weght [kg] 18 60 80 9 100 10 60 10 H60 0. 18 80 104 9 110-10 10 75 145 H75 0.3 18 50-87 110 9 110 10 85 135 H85 0.4 Preferenzale / Preferred B19

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson CMG 00 F.. 40 143 1) /153 ) CMG 00 F.. CMGIS 00 F.. 40 140 30 9 O Dmensons 81.5 P 1 H K H K N.9 1) M H K Kg 3. ) H K Kg 3.0 N M 1) Kg Kg IEC 63/71, ) IEC 80 1 P L L Flanga entrata Input flange B6 Albero uscta Output shaft 18.5 5 6 M6 16 h6 0 h6 16 5 M6 14 h6 Albero entrata Input shaft 1 Versone F / F Verson CMG CMGIS 00 H K L M N f7 O P Flanga / Flange Tpo / Type Peso / Weght [kg] 3.5 7 105 85 70 6.5 90 F105 0.1 3.5 8 10 100 80 9 100 F10 0. 3.5 8 140 115 95 9 115 F140 0. B0

Motorduttor ad ngranagg clndrc 1 Helcal n-lne gearmotors X P CMG N M Dmenson P Q R S Kg P Q R S Kg CMG 00 H../F.. V U Z L Dmensons CMG 00 H../F.. 40 143 1) /153 ) H K CMGIS 00 H../F.. 40 140 30 H K 9 O CMG 81.5 H K H K 1 X P O N M P Q R 1) IEC 63/71, ) IEC 80 S Kg S P Q.9 1) R 3. ) Kg 3.0 1 X V P U Z L N M P Flanga entrata Input flange B6 Q R S Kg Albero uscta Output shaft 18.5 5 6 P M6 16 h6 0 h6 Q R S Kg 16 V 5 Albero entrata Input shaft 1 M6 14 h6 U Z L CMG CMGIS 00 Versone H / H Verson Combnazon possbl H/F Pede / Foot Possble combnatons H/F P Q R S U V X Z Tpo Peso / Weght F105 F10 F140 Type [kg] 18 60 80 9 100 10 60 10 H60 0. 18 80 104 9 110-10 10 75 145 H75 0.3 18 50-87 110 9 110 10 85 135 H85 0.4 Preferenzale / Preferred Combnazon possbl H/F / Possble combnatons H/F Versone F / F Verson CMG CMGIS 00 H K L M Flanga / Flange N O P f7 Peso / Weght Tpo / Type [kg] 3.5 7 105 85 70 6.5 90 F105 0.1 3.5 8 10 100 80 9 100 F10 0. 3.5 8 140 115 95 9 115 F140 0. B1

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson Dmensons CMG 01 U - CMG 013 U CMG 01 U CMGIS 01 U 40 195 40 187 40 14 93 n 4 M8x15 1 45 8.5 13.5 6.5 Kg 5.3 8.5 13.5 6.5 Kg 5.0 60 h7 76 95 Flanga entrata Input flange CMG 013 U 40 8.5 13.5 B7 Flanga entrata Input flange B7 43 Albero uscta Output shaft 68 Kg 7.8 Albero uscta Output shaft.5.5 6 M6 0 h6 CMGIS 013 U 40 8.5 13.5 6 M6 43 18 18 60 Kg 7.5 5 M6 16 h6 5 M6 16 h6 Albero entrata Input shaft 1 40 1 11 n 4 M8x15 45 Albero entrata Input shaft 1 14 60 h7 76 95 0 h6 B

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 01 H.. - CMG 013 H.. CMG 01 H.. 40 195 CMGIS 01 H.. 40 187 40 14 93 CMG 1 X P 6.5 Q R S Kg 5.3 P 6.5 Q R S Kg 5.0 U Z V Flanga entrata Input flange CMG 013 H.. P B7 Flanga entrata Input flange Q R Albero uscta Output shaft 40 68 B7 43 S Kg Albero uscta Output shaft 7.8.5.5 6 M6 0 h6 6 CMGIS 013 H.. M6 0 h6 P Q R 18 18 S Kg 5 M6 5 16 h6 40 60 40 43 7.5 Albero entrata Input shaft 1 1 11 X Albero entrata Input shaft M6 1 16 h6 14 U Z V Versone H / H Verson CMG CMGIS 01 013 Pede / Foot P Q R S U V X Z Tpo / Type Peso / Weght [kg] 0 85 108 9 115 1 65 139 H65 0.7 18 80 118 9 110 1 75 140 H75 1.0 5 85 10 9 10 1 80 140 H80 1.1 18 50-87 118 9 110 1 85 130 H85 1. 5 130 154 9 110 1 90 135 H90 1.5 18 60-107.5 135 11 130 1 100 155 H100 1.7 Preferenzale / Preferred B3

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson Dmensons CMG 01 F.. - CMG 013 F.. CMG 01 F.. CMGIS 01 F.. 40 195 40 187 40 14 O P 93 1 6.5 6.5 H K H K Kg 5.3 Kg 5.0 N M L Flanga entrata Input flange CMG 013 F.. H B7 K Flanga entrata Input flange Albero uscta Output shaft 40 68 B7 43 Kg 7.8 Albero uscta Output shaft.5.5 6 M6 0 h6 6 M6 CMGIS 013 F.. 0 h6 H K 18 18 Kg 5 M6 5 16 h6 40 60 40 43 7.5 M6 16 h6 Albero entrata Input shaft 1 1 11 O Albero entrata Input shaft 1 14 N M P L Versone F / F Verson CMG CMGIS 01 013 H K L M N f7 O P Flanga / Flange Tpo / Type Peso / Weght [kg] 3 9 10 100 80 9 106 F10 0.5 3.5 9 140 115 95 9 115 F140 0.8 3.5 9 160 130 110 9 16 F160 1.1 3.5 11 00 165 130 11 165 F00 1.8 B4

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 01 H../F.. - CMG 013 H../F.. CMG 01 H../F.. 40 195 H K CMGIS 01 H../F.. 40 187 40 H K 14 O P N M CMG 93 1 X P 6.5 Q R S Kg 5.3 6 P 6.5 Q R S Kg 5.0 5 V U Z L CMG 013 H../F.. Flanga entrata Input flange H P K B7 40 68 43 Flanga entrata Input flange B7 Q R Albero uscta Output shaft S Kg Albero uscta Output shaft.5.5 7.8 6 M6 0 h6 M6 H P 0 h6 CMGIS 013 H../F.. K Q R S 18 18 40 60 40 43 Kg 7.5 Albero entrata Input shaft M6 16 h6 1 5 1 11 X V P Albero entrata Input shaft M6 1 16 h6 14 O U Z N M L CMG CMGIS 01 013 Versone H / H Verson Combnazon possbl H/F Pede / Foot Possble combnatons H/F P Q R S U V X Z Tpo Peso / Weght F10 F140 F160 F00 Type [kg] 0 85 108 9 115 1 65 139 H65 0.7 18 80 118 9 110 1 75 140 H75 1.0 5 85 10 9 10 1 80 140 H80 1.1 18 50-87 118 9 110 1 85 130 H85 1. 5 130 154 9 110 1 90 135 H90 1.5 18 60-107.5 135 11 130 1 100 155 H100 1.7 Preferenzale / Preferred Combnazon possbl H/F / Possble combnatons H/F Versone F / F Verson CMG CMGIS 01 013 H K L M N Flanga / Flange O P f7 Peso / Weght Tpo / Type [kg] 3 9 10 100 80 9 106 F10 0.5 3.5 9 140 115 95 9 115 F140 0.8 3.5 9 160 130 110 9 16 F160 1.1 3.5 11 00 165 130 11 165 F00 1.8 B5

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson CMG 0 U - CMG 03 U Dmensons CMG 0 U CMGIS 0 U 50 05 50 197 40 14 1 8.5 13.5 11.5 Kg 8.5 11.5 98 n 4 M8x15 45 13.5 6. Kg 5.9 60 h7 76 95 Flanga entrata Input flange CMG 03 U 50 8.5 13.5 B8 Flanga entrata Input flange B8 48 Albero uscta Output shaft 78 Kg 8.7 Albero uscta Output shaft 8 8 8 M8 5 h6 CMGIS 03 U 50 8.5 13.5 8 M8 5 h6 48 18 18 70 Kg 8.4 5 M6 5 16 h6 M6 16 h6 Albero entrata Input shaft 1 40 1 Albero entrata Input shaft 1 117 n 4 M8x15 45 14 60 h7 76 95 B6

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 0 H.. - CMG 03 H.. CMG 0 H.. 50 05 CMGIS 0 H.. 50 197 40 14 98 CMG 1 X P 11.5 Q R S Kg 6. P 11.5 Q R S Kg 5.9 U Z V Flanga entrata Input flange CMG 03 H.. P B8 Flanga entrata Input flange Q R Albero uscta Output shaft 50 78 B8 48 S Kg Albero uscta Output shaft 8.7 8 8 8 M8 5 h6 8 CMGIS 03 H.. M8 5 h6 P Q R 18 18 S Kg 5 M6 5 16 h6 50 70 40 48 8.4 Albero entrata Input shaft 1 1 117 X Albero entrata Input shaft M6 1 16 h6 14 U Z V Versone H / H Verson CMG CMGIS 0 03 Pede / Foot P Q R S U V X Z Tpo / Type Peso / Weght [kg] 0 85 108 9 115 1 65 139 H65 0.7 18 80 118 9 110 1 75 140 H75 1.0 5 85 10 9 10 1 80 140 H80 1.1 18 50-87 118 9 110 1 85 130 H85 1. 5 130 154 9 110 1 90 135 H90 1.5 18 60-107.5 135 11 130 1 100 155 H100 1.7 Preferenzale / Preferred B7

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson Dmensons CMG 0 F.. - CMG 03 F.. CMG 0 F.. CMGIS 0 F.. 50 05 50 197 40 14 O P 98 1 11.5 H K H K Kg 6. 11.5 Kg 5.9 N M L Flanga entrata Input flange CMG 03 F.. H B8 K Flanga entrata Input flange Albero uscta Output shaft 50 78 48 Kg 8.7 Albero uscta Output shaft 8 8 8 M8 5 h6 8 CMGIS 03 F.. H K 18 18 Kg 5 M6 5 16 h6 50 70 40 48 8.4 Albero entrata Input shaft 1 1 117 O Albero entrata Input shaft 1 14 N M P L B8 M8 5 h6 M6 16 h6 Versone F / F Verson CMG CMGIS 0 03 H K L M N f7 O P Flanga / Flange Tpo / Type Peso / Weght [kg] 3 9 10 100 80 9 106 F10 0.5 3.5 9 140 115 95 9 115 F140 0.8 3.5 9 160 130 110 9 16 F160 1.1 3.5 11 00 165 130 11 165 F00 1.8 B8

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 0 H../F.. - CMG 03 H../F.. CMG 0 H../F.. 50 05 H K CMGIS 0 H../F.. 50 197 40 H K 14 O P N M CMG 98 1 X P 11.5 Q R S Kg 6. 8 P 11.5 Q R S Kg 5.9 5 V U Z L CMG 03 H../F.. Flanga entrata Input flange H P K B8 50 78 48 Flanga entrata Input flange B8 Q R Albero uscta Output shaft S Albero uscta Output shaft 8 8 Kg 8.7 8 M8 5 h6 H P M8 5 h6 CMGIS 03 H../F.. K Q R S Kg 18 18 50 70 40 48 8.4 Albero entrata Input shaft M6 16 h6 1 5 1 117 X V P Albero entrata Input shaft M6 16 h6 1 14 O U Z N M L CMG CMGIS 0 03 Versone H / H Verson Combnazon possbl H/F Pede / Foot Possble combnatons H/F P Q R S U V X Z Tpo Peso / Weght F10 F140 F160 F00 Type [kg] 0 85 108 9 115 1 65 139 H65 0.7 18 80 118 9 110 1 75 140 H75 1.0 5 85 10 9 10 1 80 140 H80 1.1 18 50-87 118 9 110 1 85 130 H85 1. 5 130 154 9 110 1 90 135 H90 1.5 18 60-107.5 135 11 130 1 100 155 H100 1.7 Preferenzale / Preferred Combnazon possbl H/F / Possble combnatons H/F Versone F / F Verson CMG CMGIS 0 03 H K L M N Flanga / Flange O P f7 Peso / Weght Tpo / Type [kg] 3 9 10 100 80 9 106 F10 0.5 3.5 9 140 115 95 9 115 F140 0.8 3.5 9 160 130 110 9 16 F160 1.1 3.5 11 00 165 130 11 165 F00 1.8 B9

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson CMG 03 U - CMG 033 U Dmensons CMG 03 U CMGIS 03 U 60 37 60 9.5 40 156 118 n 6 M8x19 30 1 70 30 9 15 5 15 Kg 11.3 Kg 11. 9 5 90 h7 110 17 Flanga entrata Input flange CMG 033 U 60 9 15 B9 Flanga entrata Input flange B9 41.5 Albero uscta Output shaft 303 Kg 13.6 Albero uscta Output shaft 33 33 8 M10 30 h6 CMGIS 033 U 60 9 15 8 M10 30 h6 41.5 18 1.5 95 Kg 13.3 6 M6 5 19 h6 M6 16 h6 Albero entrata Input shaft 1 40 1 118 n 6 M8x19 70 Albero entrata Input shaft 1 156 90 h7 110 17 30 30 B30

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 03 H.. - CMG 033 H.. CMG 03 H.. 60 37 CMGIS 03 H.. 60 9.5 40 156 118 CMG 1 X P 5 Q R S Kg 11.3 P 5 Q R S Kg 11. U Z V Flanga entrata Input flange CMG 033 H.. P B9 Q R Albero uscta Output shaft 60 303 Flanga entrata Input flange B9 41.5 S Kg Albero uscta Output shaft 33 33 13.6 8 M10 30 h6 8 CMGIS 033 H.. M10 30 h6 60 95 40 P 41.5 Q R 18 1.5 S Kg 6 M6 5 19 h6 13.3 Albero entrata Input shaft 1 1 118 X Albero entrata Input shaft M6 1 16 h6 156 U Z V Versone H / H Verson CMG CMGIS 03 033 Pede / Foot P Q R S U V X Z Peso / Weght Tpo / Type [kg] 30 105 136 14 160 14 95 194 H95 1.5 30 100 150 150 11 18 70 160 14 110 185 H110 1.9 30 165 195 14 135 14 115 170 H115. 35 110 160 14 170 14 10 10 H10.6 19.5 149.5 184 14 180 18 130 14 H130.9 Preferenzale / Preferred B31

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson Dmensons CMG 03 F.. - CMG 033 F.. CMG 03 F.. CMGIS 03 F.. 60 37 60 9.5 40 156 O P 1 5 5 118 H K H K N L Kg 11.3 Kg 11. M Flanga entrata Input flange CMG 033 F.. H B9 K Albero uscta Output shaft 60 303 Flanga entrata Input flange 41.5 Kg 13.6 Albero uscta Output shaft 33 33 8 M10 30 h6 8 CMGIS 033 F.. 60 95 40 H K 41.5 18 1.5 Kg 13.3 6 M6 5 19 h6 Albero entrata Input shaft 1 1 118 O Albero entrata Input shaft 1 156 N M P L B9 M10 30 h6 M6 16 h6 Versone F / F Verson CMG CMGIS 03 033 H K L M N f7 O P Flanga / Flange Tpo / Type Peso / Weght [kg] 3.5 11 160 130 110 9 140 F160 1.0 3.5 11 00 165 130 11 165 F00 1.8 4 13 50 15 180 14 15 F50.9 B3

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG 03 H../F.. - CMG 033 H../F.. CMG Dmensons CMG 03 H../F.. 60 37 H K CMGIS 03 H../F.. 60 9.5 40 H K 156 O P N M CMG 118 1 X P 5 Q R S Kg 11.3 8 P 5 Q R S Kg 11. 6 V U Z L CMG 033 H../F.. Flanga entrata Input flange H P K B9 60 303 41.5 Flanga entrata Input flange B9 Q R Albero uscta Output shaft S Kg Albero uscta Output shaft 33 33 13.6 8 M10 30 h6 H P M10 CMGIS 033 H../F.. 60 95 40 30 h6 K 41.5 Q R S Kg 18 1.5 13.3 Albero entrata Input shaft M6 1 19 h6 5 1 118 X V P Albero entrata Input shaft M6 16 h6 1 156 O U Z N M L CMG CMGIS 03 033 Versone H / H Verson Combnazon possbl H/F Pede / Foot Possble combnatons H/F P Q R S U V X Z Tpo Peso / Weght F160 F00 F50 Type [kg] 30 105 136 14 160 14 95 194 H95 1.5 30 100 150 150 11 14 110 185 H110 1.9 18 70 160 30 165 195 14 135 14 115 170 H115. 35 110 160 14 170 14 10 10 H10.6 19.5 149.5 184 14 180 18 130 14 H130.9 Preferenzale / Preferred Combnazon possbl H/F / Possble combnatons H/F Versone F / F Verson CMG CMGIS 03 033 H K L M N Flanga / Flange O P f7 Peso / Weght Tpo / Type [kg] 3.5 11 160 130 110 9 140 F160 1.0 3.5 11 00 165 130 11 165 F00 1.8 4 13 50 15 180 14 15 F50.9 B33

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson CMG 04 U - CMG 043 U Dmensons CMG 04 U CMGIS 04 U 70 50 70 4.5 40 156 18 n 6 M8x19 30 1 70 30 9 15 15 Kg 15 13. Kg 13.1 9 15 90 h7 110 17 Flanga entrata Input flange CMG 043 U 70 9 15 B10 Flanga entrata Input flange B10 51.5 Albero uscta Output shaft 316 Kg 15.5 Albero uscta Output shaft 38 38 10 M1 35 h6 CMGIS 043 U 70 9 15 10 M1 35 h6 51.5 18 1.5 308 Kg 15. 6 M6 5 19 h6 M6 16 h6 Albero entrata Input shaft 1 40 1 18 n 6 M8x19 70 Albero entrata Input shaft 1 156 90 h7 110 17 30 30 B34

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 04 H.. - CMG 043 H.. CMG 04 H.. 70 50 CMGIS 04 H.. 70 4.5 40 156 18 CMG 1 X P 15 Q R S Kg 13. P 15 Q R S Kg 13.1 U Z V Flanga entrata Input flange CMG 043 H.. P B10 Q R Albero uscta Output shaft 70 316 Flanga entrata Input flange B10 51.5 S Kg Albero uscta Output shaft 38 38 15.5 10 M1 35 h6 10 CMGIS 043 H.. M1 35 h6 70 308 40 P 51.5 Q R 18 1.5 S Kg 6 M6 15. 5 19 h6 M6 16 h6 Albero entrata Input shaft 1 1 18 X Albero entrata Input shaft 1 156 U Z V Versone H / H Verson CMG CMGIS 04 043 Pede / Foot P Q R S U V X Z Peso / Weght Tpo / Type [kg] 30 105 136 14 160 14 95 194 H95 1.5 30 100 150 150 11 18 70 160 14 110 185 H110 1.9 30 165 195 14 135 14 115 170 H115. 35 110 160 14 170 14 10 10 H10.6 19.5 149.5 184 14 180 18 130 14 H130.9 Preferenzale / Preferred B35

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Dmenson Dmensons CMG 04 F.. - CMG 043 F.. CMG 04 F.. CMGIS 04 F.. 70 50 70 4.5 40 156 O P 1 15 15 18 H K H K N L Kg 13. Kg 13.1 M Flanga entrata Input flange CMG 043 F.. H B10 K Albero uscta Output shaft 70 316 Flanga entrata Input flange 51.5 Kg 15.5 Albero uscta Output shaft 38 38 10 M1 35 h6 10 CMGIS 043 F.. 70 308 40 H K 51.5 18 1.5 Kg 15. 6 M6 5 19 h6 Albero entrata Input shaft 1 1 18 O Albero entrata Input shaft 1 156 N M P L B10 M1 35 h6 M6 16 h6 Versone F / F Verson CMG CMGIS 04 043 H K L M N f7 O P Flanga / Flange Tpo / Type Peso / Weght [kg] 3.5 11 160 130 110 9 140 F160 1.0 3.5 11 00 165 130 11 165 F00 1.8 4 13 50 15 180 14 15 F50.9 B36

Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors CMG Dmenson Dmensons CMG 04 H../F.. - CMG 043 H../F.. CMG 04 H../F.. 70 50 H K CMGIS 04 H../F.. 70 4.5 40 H K 156 O P N M 18 CMG 1 X P 15 Q R S Kg 13. 10 P 15 Q R S Kg 13.1 6 V U Z L CMG 043 H../F.. Flanga entrata Input flange H P K B10 70 316 51.5 Flanga entrata Input flange B10 Q R Albero uscta Output shaft S Kg Albero uscta Output shaft 38 38 15.5 M1 35 h6 10 H P M1 CMGIS 043 H../F.. 70 308 40 35 h6 K 51.5 Q R S 18 1.5 Kg 15. Albero entrata Input shaft M6 19 h6 1 5 1 18 X V P Albero entrata Input shaft M6 16 h6 1 156 O U Z N M L CMG CMGIS 04 043 Versone H / H Verson Combnazon possbl H/F Pede / Foot Possble combnatons H/F P Q R S U V X Z Tpo Peso / Weght F160 F00 F50 Type [kg] 30 105 136 14 160 14 95 194 H95 1.5 30 100 150 150 11 14 110 185 H110 1.9 18 70 160 30 165 195 14 135 14 115 170 H115. 35 110 160 14 170 14 10 10 H10.6 19.5 149.5 184 14 180 18 130 14 H130.9 Preferenzale / Preferred Combnazon possbl H/F / Possble combnatons H/F Versone F / F Verson CMG CMGIS 04 043 H K L M N Flanga / Flange O P f7 Peso / Weght Tpo / Type [kg] 3.5 11 160 130 110 9 140 F160 1.0 3.5 11 00 165 130 11 165 F00 1.8 4 13 50 15 180 14 15 F50.9 B37

CMG Motorduttor ad ngranagg clndrc Helcal n-lne gearmotors Note/Notes B38

CMB CMB CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Pag. Page Indce Index Caratterstche tecnche Techncal features C Desgnazone Clascaton C Sens d rotazone Drecton of rotaton C3 Smbologa Symbols C3 Lubrfcazone Lubrcaton C4 Carch radal Radal loads C4 Dat tecnc Techncal data C5 Dmenson Dmensons C1 Accessor Accessores C16 CMB Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 017A C1

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Caratterstche tecnche I motorduttor ad ass ortogonal della sere CMB sono caratterzzat da un elevato grado d modulartà: sono stat realzzat con una carcassa completamente ntercambable con quella de rduttor a vte senza fne della sere CM. Sono pertanto confgurabl secondo le esgenze dell applcazone con flanga d uscta, albero d uscta, bracco d reazone. Caratterstche comun a tutta la sere: Carcassa n allumno. Ingranagg sempre rettfcat. Lubrfcazone permanente con olo sntetco. Techncal features The hgh degree of modularty of CMB helcal bevel gearmotors allows t to be completely nterchangeable wth CM wormgearboxes. It s possble to set up the verson requred usng output flanges, output shafts and optonal torque arms. Common features of all CMB range are: De-cast alumnum housng. Ground helcal gears. Permanent synthetc ol long-lfe lubrcaton. Desgnazone Clascaton RIDUTTORE / GEARBOX CMB 63 3 U 9.81 D5 90 B5 SZDX BRSX 90 Tpo Type Grandezza Sze Stad Stages Versone Verson Rapporto Rato Albero cavo uscta Hollow output shaft IEC Forma costruttva Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle CMB 40 50 63 90 3 U FD FS FBD FBS FLD FLS ved tabelle see tables ved tabelle see tables 56.. 90.. B5 B14 SZDX SZSX DZ BRDX BRSX 0 90 180 70 RIDUTTORE / GEARBOX CMBIS 63 3 U 9.81 D5 SZDX BRSX 90 Tpo Type Grandezza Sze Stad Stages Versone Verson Rapporto Rato Albero cavo uscta Hollow output shaft Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle CMBIS 40 50 63 90 3 U FD FS FBD FBS FLD FLS ved tabelle see tables ved tabelle see tables SZDX SZSX DZ BRDX BRSX 0 90 180 70 C

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Desgnazone Clascaton Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle 90 90 180 U FD FLD FBD FS FLS FBS SZDX SZSX 0 DZ BRDX BRSX 70 CMB Versone Rduttore Gearbox Verson 70 MOTORE / MOTOR 1.5kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. ved tabelle see tables p 4p 6p 8p 1ph 3ph 30V 30/400V 50Hz 60Hz Sens d rotazone CMB... CMBIS.. Drecton of rotaton CMB...3 CMBIS..3 Smbologa n1 n P1 M Pn1 Mn R A [mn-1] [mn-1] [N] [N] Symbols Veloctà n ngresso / Input speed Veloctà n uscta / Output speed Rapporto d rduzone / Rato Potenza n entrata / Input power Coppa nomnale n uscta n funzone d P1 / Output torque referred to P1 Potenza nomnale n entrata / Nomnal nput power Coppa nomnale n uscta n funzone d Pn1 / Nomnal output torque referred to Pn1 Fattore d servzo / Servce factor Carco radale ammssble n uscta / Permtted output radal load Carco assale ammssble n uscta / Permtted output axal load C3

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Lubrfcazone Tutt motorduttor CMB sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton ( vscosty grade 30) makes t possble to use CMB gearmotors n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. Carch radal Radal loads R A = R x 0. Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: Rc x R L n [mn -1 ] R [N] CMB 40 CMB 50 CMB 633 CMB 903 400 905 1116 1835 68 300 996 18 00 95 00 1141 1406 31 3379 170 104 1484 441 3567 140 1414 1743 604 3806 100 158 1949 913 4686 90 1638 019 331 4853 60 047 490 3801 5556 40 54 309 449 6614 30 778 3334 5159 7540 0 3180 3816 5906 8631 15 3500 400 6500 9500 10 3500 400 6500 9500 CMB 40 CMB 50 CMB 633 CMB 903 a 86 104 118 157 b 66 79 93 117 R MAX 3500 400 6500 9500 R c R a (b +x) R R c R MAX a, b = valor rportat nella tabella a, b = values gven n the table C4

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMBIS 40 56 B5/B14 63 B5/B14 71 B5/B14 7 40 1.0 6.18 187 40 0.83 7.49 15 40 0.68 9. 118 45 0.59 11.83 11 45 0.56 1.48 94.4 45 0.47 14.83 79.4 45 0.40 17.63 75.3 55 0.46 18.6 6.7 55 0.38.33 58.6 55 0.36 3.91 48.5 65 0.35 8.89 45.4 65 0.33 30.84 41.7 65 0.30 33.57 39.3 65 0.8 35.63 3.7 65 0.4 4.75 5.3 65 0.18 55.31 3.7 65 0.17 59.06 1.8 65 0.16 64.9 19.3 65 0.14 7.50 * * * * CMB CMBIS 50 7 70 1.8 6.18 187 70 1.5 7.49 15 70 1. 9.0 118 90 1. 11.83 11 90 1.1 1.48 94.4 90 0.95 14.83 79.4 90 0.80 17.63 75.3 110 0.9 18.60 6.7 110 0.77.33 58.6 110 0.7 3.91 48.5 15 0.67 8.89 45.4 15 0.63 30.84 41.7 15 0.58 33.57 39.3 15 0.55 35.63 3.7 15 0.46 4.75 5.3 15 0.35 55.31 3.7 15 0.33 59.06 1.8 15 0.30 64.9 19.3 15 0.7 7.50 N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. C8 alla pag. C11 56 B5/B14 63 B5/B14 71 B5/B14 80 B5/B14 N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page C8 to C11. * * * * * Dmenson IEC / IEC Dmensons 56 B5 56 B14 63 B5 63 B14 71 B5 71 B14 80 B5 80 B14 N 80 50 95 60 110 70 130 80 M 100 65 115 75 130 85 165 100 P 10 80 140 90 160 105 00 10 D 9 11 14 19 C5

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMBIS 633 13 150 3.6 6.58 175 150.9 7.99 143 150.4 9.81 134 150. 10.44 11 150 1.9 1.53 105 150 1.8 13.31 88.6 170 1.7 15.81 78.8 0 1.9 17.77 64.9 0 1.6 1.56 5.9 0 1.3 6.48 49.7 0 1. 8.17 41.4 0 1.0 33.81 39.0 0 0.96 35.9 36.0 50 1.00 38.88 9.7 50 0.83 47.16 4. 50 0.67 57.93.7 50 0.63 61.63 18.9 50 0.53 73.96 17.8 50 0.50 78.58 15.0 50 0.4 93.33 10.0 50 0.8 140.5 7.7 50 0.1 181.81 6.6 50 0.18 11.31 5.9 50 0.16 38.31 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 * * * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. C8 alla pag. C11 * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page C8 to C11. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 N 95 110 70 130 80 130 95 M 115 130 85 165 100 165 115 P 140 160 105 00 10 00 140 D 11 14 19 4 C6

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters CMBIS 903 71 B5 80 B5/B14 90 B5/B14 10011 B5/B14 11 80 6.57 6.65 175 80 5.46 8.00 144 80 4.48 9.74 15 80 3.90 11.1 99.3 300 3.3 14.09 78.0 450 3.91 17.95 64.8 450 3.5 1.60 53. 450.67 6.30 46.3 450.3 30.5 35.7 500 1.99 39.6 9.6 500 1.65 47.5 4.3 500 1.36 57.5 1. 500 1.18 66.17 16.8 500 0.94 83.0 13.0 500 0.7 108.09 10.6 500 0.59 13.3 9.5 500 0.53 147.9 8.4 500 0.47 167.09 7.3 500 0.41 191.06 6.3 500 0.35 1.88 5.3 500 0.30 6.96 B B B B B B B B B B B * B * B * B * B * * B * * B * * B * * B * * * B * * * B * * * CMB N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. B = Boccola d rduzone n accao. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. C8 alla pag. C11 N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. B = Metal shaft sleeve. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page C8 to C11. Dmenson IEC / IEC Dmensons 71 B5 80 B5 80 B14 90 B5 90 B14 100/11 B5 100/11 B14 N 110 130 80 130 95 180 110 M 130 165 100 165 115 15 130 P 160 00 10 00 140 50 160 D 14 19 4 8 C7

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.06 56A4 39.3 14 4.7 35.63 CMB40 B5/B14 (1400 mn -1 ) 3.7 16 4.0 4.75 B5/B14 5.3 1 3.1 55.31 B5/B14 3.7 3.9 59.06 B5/B14 1.8 5.6 64.9 B5/B14 19.3 8.3 7.50 B5/B14 0.09 56B4 48.5 17 3.9 8.89 CMB40 B5/B14 (1400 mn -1 ) 45.4 18 3.7 30.84 B5/B14 41.7 19 3.4 33.57 B5/B14 39.3 1 3. 35.63 B5/B14 3.7 5.6 4.75 B5/B14 5.3 3.0 55.31 B5/B14 3.7 34 1.9 59.06 B5/B14 1.8 37 1.8 64.9 B5/B14 19.3 4 1.6 7.50 B5/B14 0.1 63A4 7 5 8.4 6.18 CMB40 B5/B14 (1400 mn -1 ) 187 6 6.9 7.49 B5/B14 15 7 5.6 9.0 B5/B14 118 9 4.9 11.83 B5/B14 11 10 4.7 1.48 B5/B14 94.4 11 3.9 14.83 B5/B14 79.4 14 3.3 17.63 B5/B14 75.3 14 3.8 18.60 B5/B14 6.7 17 3..33 B5/B14 58.6 18 3.0 3.91 B5/B14 48.5.9 8.89 B5/B14 45.4 4.7 30.84 B5/B14 41.7 6.5 33.57 B5/B14 39.3 7.4 35.63 B5/B14 3.7 33.0 4.75 B5/B14 5.3 43 1.5 55.31 B5/B14 3.7 45 1.4 59.06 B5/B14 1.8 49 1.3 64.9 B5/B14 19.3 56 1. 7.50 B5/B14 0.18 63B4 7 7 5.6 6.18 CMB40 B5/B14 (1400 mn -1 ) 187 9 4.6 7.49 B5/B14 15 11 3.8 9.0 B5/B14 118 14 3.3 11.83 B5/B14 11 14 3.1 1.48 B5/B14 94.4 17.6 14.83 B5/B14 79.4 0. 17.63 B5/B14 75.3 1.6 18.60 B5/B14 6.7 6.1.33 B5/B14 58.6 8.0 3.91 B5/B14 48.5 33 1.9 8.89 B5/B14 45.4 36 1.8 30.84 B5/B14 41.7 39 1.7 33.57 B5/B14 39.3 41 1.6 35.63 B5/B14 3.7 49 1.3 4.75 B5/B14 5.3 64 1.0 55.31 B5/B14 3.7 68 0.95 59.06 B5/B14 1.8 74 0.88 64.9 B5/B14 19.3 84 0.8 7.50 B5/B14 45.4 36 3.5 30.84 CMB50 B5/B14 41.7 39 3. 33.57 B5/B14 39.3 41 3.0 35.63 B5/B14 3.7 49.5 4.75 B5/B14 5.3 64.0 55.31 B5/B14 3.7 68 1.8 59.06 B5/B14 1.8 74 1.7 64.9 B5/B14 19.3 84 1.5 7.50 B5/B14 4. 67 3.7 57.93 CMB633 B5.7 71 3.5 61.63 B5 18.9 85.9 73.96 B5 17.8 91.8 78.58 B5 15.0 108.3 93.33 B5 10.0 16 1.5 140.5 B5 7.7 10 1. 181.81 B5 6.6 44 1.0 11.31 B5 5.9 75 0.9 38.31 B5 3.7 33 3.8 4.75 CMB50 B5/B14 5.3 43.9 55.31 B5/B14 3.7 45.8 59.06 B5/B14 1.8 49.5 64.9 B5/B14 19.3 56. 7.50 B5/B14 18.9 57 4.4 73.96 CMB633 B5 17.8 60 4.1 78.58 B5 15.0 7 3.5 93.33 B5 10.0 108.3 140.5 B5 7.7 140 1.8 181.81 B5 6.6 163 1.5 11.31 B5 5.9 183 1.4 38.31 B5 C8

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 71A4 7 10 4.0 6.18 CMB40 B5/B14 (1400 mn -1 ) 187 1 3.3 7.49 B5/B14 15 15.7 9.0 B5/B14 118 19.4 11.83 B5/B14 11 0. 1.48 B5/B14 94.4 4 1.9 14.83 B5/B14 79.4 8 1.6 17.63 B5/B14 75.3 30 1.8 18.60 B5/B14 6.7 36 1.5.33 B5/B14 58.6 38 1.4 3.91 B5/B14 48.5 46 1.4 8.89 B5/B14 45.4 49 1.3 30.84 B5/B14 41.7 54 1. 33.57 B5/B14 39.3 57 1.1 35.63 B5/B14 3.7 69 0.9 4.75 B5/B14 7 10 7.1 6.18 CMB50 B5/B14 187 1 5.8 7.49 B5/B14 15 15 4.7 9.0 B5/B14 118 19 4.7 11.83 B5/B14 11 0 4.5 1.48 B5/B14 94.4 4 3.8 14.83 B5/B14 79.4 8 3. 17.63 B5/B14 75.3 30 3.7 18.60 B5/B14 6.7 36 3.1.33 B5/B14 58.6 38.9 3.91 B5/B14 48.5 46.7 8.89 B5/B14 45.4 49.5 30.84 B5/B14 41.7 54.3 33.57 B5/B14 39.3 57. 35.63 B5/B14 3.7 69 1.8 4.75 B5/B14 5.3 89 1.4 55.31 B5/B14 3.7 95 1.3 59.06 B5/B14 1.8 103 1. 64.9 B5/B14 19.3 116 1.1 7.50 B5/B14 41.4 54 4.1 33.81 CMB633 B5/B14 39.0 58 3.8 35.9 B5/B14 36.0 6 4.0 38.88 B5/B14 9.7 76 3.3 47.16 B5/B14 4. 93.7 57.93 B5/B14.7 99.5 61.63 B5/B14 18.9 119.1 73.96 B5/B14 17.8 16.0 78.58 B5/B14 15.0 150 1.7 93.33 B5/B14 10.0 5 1.1 140.5 B5/B14 7.7 91 0.9 181.81 B5/B14 4.3 9 5.4 57.5 CMB903 B5 1. 106 4.7 66.17 B5 16.8 133 3.7 83.0 B5 13.0 173.9 108.09 B5 10.6 1.4 13.3 B5 9.5 37.1 147.9 B5 8.4 68 1.9 167.09 B5 7.3 306 1.6 191.06 B5 6.3 356 1.4 1.88 B5 5.3 4 1. 6.96 B5 0.37 71B4 7 15.7 6.18 CMB40 B5/B14 (1400 mn -1 ) 187 18.3 7.49 B5/B14 15 1.8 9.0 B5/B14 118 8 1.6 11.83 B5/B14 11 30 1.5 1.48 B5/B14 94.4 35 1.3 14.83 B5/B14 79.4 4 1.1 17.63 B5/B14 75.3 44 1. 18.60 B5/B14 6.7 53 1.0.33 B5/B14 58.6 57 1.0 3.91 B5/B14 48.5 69 0.9 8.89 B5/B14 45.4 73 0.9 30.84 B5/B14 7 15 4.8 6.18 CMB50 B5/B14 187 18 3.9 7.49 B5/B14 15 3. 9.0 B5/B14 118 8 3. 11.83 B5/B14 11 30 3.0 1.48 B5/B14 94.4 35.6 14.83 B5/B14 79.4 4. 17.63 B5/B14 75.3 44.5 18.60 B5/B14 6.7 53.1.33 B5/B14 58.6 57 1.9 3.91 B5/B14 48.5 69 1.8 8.89 B5/B14 45.4 73 1.7 30.84 B5/B14 41.7 80 1.6 33.57 B5/B14 39.3 85 1.5 35.63 B5/B14 3.7 101 1. 4.75 B5/B14 5.3 131 1.0 55.31 B5/B14 3.7 140 0.9 59.06 B5/B14 64.9 51 4.3 1.56 CMB633 B5/B14 5.9 63 3.5 6.48 B5/B14 49.7 67 3.3 8.17 B5/B14 41.4 80.7 33.81 B5/B14 39.0 85.6 35.9 B5/B14 36.0 9.7 38.88 B5/B14 9.7 11. 47.16 B5/B14 4. 137 1.8 57.93 B5/B14.7 146 1.7 61.63 B5/B14 18.9 175 1.4 73.96 B5/B14 17.8 186 1.3 78.58 B5/B14 15.0 1 1.1 93.33 B5/B14 9.6 11 4.5 47.5 CMB903 B5 4.3 136 3.7 57.5 B5 1. 157 3. 66.17 B5 16.8 197.5 83.0 B5 13.0 56 1.9 108.09 B5 10.6 314 1.6 13.3 B5 9.5 351 1.4 147.9 B5 8.4 396 1.3 167.09 B5 7.3 453 1.1 191.06 B5 6.3 56 0.9 1.88 B5 5.3 64 0.8 6.96 B5 CMB C9

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 80A4 7 3. 6.18 CMB50 B5/B14 (1400 mn -1 ) 187 6.6 7.49 B5/B14 15 3. 9.0 B5/B14 118 4. 11.83 B5/B14 11 44.0 1.48 B5/B14 94.4 5 1.7 14.83 B5/B14 79.4 6 1.4 17.63 B5/B14 75.3 66 1.7 18.60 B5/B14 6.7 79 1.4.33 B5/B14 58.6 84 1.3 3.91 B5/B14 48.5 10 1. 8.89 B5/B14 45.4 109 1.1 30.84 B5/B14 41.7 118 1.1 33.57 B5/B14 39.3 16 1.0 35.63 B5/B14 13 3 6.5 6.58 CMB633 B5/B14 175 8 5.3 7.99 B5/B14 143 35 4.3 9.81 B5/B14 134 37 4.1 10.44 B5/B14 11 44 3.4 1.53 B5/B14 105 47 3. 13.31 B5/B14 88.6 56 3.0 15.81 B5/B14 78.8 63 3.5 17.77 B5/B14 64.9 76.9 1.56 B5/B14 5.9 93.4 6.48 B5/B14 49.7 99. 8.17 B5/B14 41.4 119 1.8 33.81 B5/B14 39.0 17 1.7 35.9 B5/B14 36.0 137 1.8 38.88 B5/B14 9.7 166 1.5 47.16 B5/B14 4. 04 1. 57.93 B5/B14.7 17 1. 61.63 B5/B14 18.9 61 1.0 73.96 B5/B14 17.8 77 0.9 78.58 B5/B14 46.3 107 4. 30.5 CMB903 B5/B14 35.7 138 3.6 39.6 B5/B14 9.6 167 3.0 47.5 B5/B14 4.3 03.5 57.5 B5/B14 1. 33.1 66.17 B5/B14 16.8 93 1.7 83.0 B5/B14 13.0 381 1.3 108.09 B5/B14 10.6 466 1.1 13.3 B5/B14 9.5 5 1.0 147.9 B5/B14 8.4 589 0.8 167.09 B5/B14 0.75 80B4 7 30.4 6.18 CMB50 B5/B14 (1400 mn -1 ) 187 36 1.9 7.49 B5/B14 15 44 1.6 9.0 B5/B14 118 57 1.6 11.83 B5/B14 11 60 1.5 1.48 B5/B14 94.4 71 1.3 14.83 B5/B14 79.4 85 1.1 17.63 B5/B14 75.3 89 1. 18.60 B5/B14 6.7 107 1.0.33 B5/B14 58.6 115 1.0 3.91 B5/B14 48.5 139 0.9 8.89 B5/B14 13 3 4.7 6.58 CMB633 B5/B14 175 38 3.9 7.99 B5/B14 143 47 3. 9.81 B5/B14 134 50 3.0 10.44 B5/B14 11 60.5 1.53 B5/B14 105. 64.3 13.31 B5/B14 88.6 76. 15.81 B5/B14 78.8 85.6 17.77 B5/B14 64.9 104.1 1.56 B5/B14 5.9 17 1.7 6.48 B5/B14 49.7 135 1.6 8.17 B5/B14 41.4 163 1.4 33.81 B5/B14 39.0 173 1.3 35.9 B5/B14 36.0 187 1.3 38.88 B5/B14 9.7 7 1.1 47.16 B5/B14 4. 79 0.9 57.93 B5/B14.7 96 0.8 61.63 B5/B14 64.8 104 4.3 1.60 CMB903 B5/B14 53. 16 3.6 6.30 B5/B14 46.3 145 3.1 30.5 B5/B14 35.7 189.6 39.6 B5/B14 9.6 7. 47.5 B5/B14 4.3 77 1.8 57.5 B5/B14 1. 318 1.6 66.17 B5/B14 16.8 400 1. 83.0 B5/B14 13.0 519.8 1.0 108.09 B5 C10

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 1.1 90S4 13 46 3. 6.58 CMB633 B5/B14 (1400 mn -1 ) 175 56.7 7.99 B5/B14 143 69. 9.81 B5/B14 134 74.0 10.44 B5/B14 11 88 1.7 1.53 B5/B14 105 94 1.6 13.31 B5/B14 88.6 11 1.5 15.81 B5/B14 78.8 15 1.8 17.77 B5/B14 64.9 15 1.4 1.56 B5/B14 5.9 187 1. 6.48 B5/B14 49.7 199 1.1 8.17 B5/B14 41.4 38 0.9 33.81 B5/B14 39.0 53 0.9 35.9 B5/B14 36.0 74 0.9 38.88 B5/B14 1.5 11 47 6.0 6.65 CMB903 B5/B14 175 56 5.0 8.00 B5/B14 144 69 4.1 9.74 B5/B14 15 79 3.5 11.1 B5/B14 99.3 99 3.0 14.09 B5/B14 78.0 17 3.6 17.95 B5/B14 64.8 15 3.0 1.60 B5/B14 53. 185.4 6.30 B5/B14 46.3 13.1 30.5 B5/B14 35.7 77 1.8 39.6 B5/B14 9.6 333 1.5 47.5 B5/B14 4.3 406 1. 57.5 B5/B14 1. 467 1.1 66.17 B5/B14 16.8 587 0.9 83.0 B5/B14 90L4 13 63.4 6.58 CMB633 B5/B14 (1400 mn -1 ) 175 77.0 7.99 B5/B14 143 94 1.6 9.81 B5/B14 134 100 1.5 10.44 B5/B14 11 10 1. 1.53 B5/B14 105 18 1. 13.31 B5/B14 88.6 15 1.1 15.81 B5/B14 78.8 171 1.3 17.77 B5/B14 64.9 07 1.1 1.56 B5/B14 5.9 55 0.9 6.48 B5/B14 11 64 4.4 6.65 CMB903 B5/B14 175 77 3.6 8.00 B5/B14 144 94 3.0 9.74 B5/B14 15 108.6 11.1 B5/B14 99.3 136. 14.09 B5/B14 78.0 173.6 17.95 B5/B14 64.8 08. 1.60 B5/B14 53. 53 1.8 6.30 B5/B14 46.3 91 1.5 30.5 B5/B14 35.7 378 1.3 39.6 B5/B14 9.6 454 1.1 47.5 B5/B14 4.3 553 0.9 57.5 B5/B14 1.85 90LB4 13 78 1.9 6.58 CMB633 B5/B14 (1400 mn -1 ) 175 95 1.6 7.99 B5/B14 143 116 1.3 9.81 B5/B14 134 14 1. 10.44 B5/B14 11 149 1.0 1.53 B5/B14 105 158 1.0 13.31 B5/B14 88.6 188 0.9 15.81 B5/B14 78.8 11 1.0 17.77 B5/B14. 11 79 3.5 6.65 CMB903 B5/B14 175 95.9 8.00 B5/B14 144 116.4 9.74 B5/B14 15 133.1 11.1 B5/B14 99.3 167 1.8 14.09 B5/B14 78.0 13.1 17.95 B5/B14 64.8 56 1.8 1.60 B5/B14 53. 31 1.4 6.30 B5/B14 46.3 359 1.3 30.5 B5/B14 35.7 466 1.1 39.6 B5/B14 9.6 561 0.9 47.5 B5/B14 100LA4 11 94 3.0 6.65 CMB903 B5/B14 (1400 mn -1 ) 175 113.5 8.00 B5/B14 144 137.0 9.74 B5/B14 15 158 1.8 11.1 B5/B14 99.3 199 1.5 14.09 B5/B14 78.0 53 1.8 17.95 B5/B14 64.8 305 1.5 1.60 B5/B14 53. 371 1. 6.30 B5/B14 46.3 47 1.1 30.5 B5/B14 35.7 554 0.9 39.6 B5/B14 3 100LB4 11 18. 6.65 CMB903 B5/B14 (1400 mn -1 ) 175 154 1.8 8.00 B5/B14 144 187 1.5 9.74 B5/B14 15 16 1.3 11.1 B5/B14 99.3 71 1.1 14.09 B5/B14 78.0 345 1.3 17.95 B5/B14 64.8 416 1.1 1.60 B5/B14 53. 506 0.9 6.30 B5/B14 4 11M4 11 171 1.6 6.65 CMB903 B5/B14 (1400 mn -1 ) 175 05 1.4 8.00 B5/B14 144 50 1.1 9.74 B5/B14 15 87 1.0 11.1 B5/B14 99.3 361 0.8 14.09 B5/B14 78.0 460 1.0 17.95 B5/B14 CMB C11

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Dmenson CMB 40 U.. CMB 40.. - CMBIS 40.. CMBIS 40 U.. Dmensons 50 154.5 70 151.5 30 78 73 45 6.5 4.5 4.5 11.5 50 35 6.5 Ø60 f7 14 j6 71.5 55 4-M6x11 75 87 100 Flanga entrata Input flange C5 Kg 3.4 kg Albero entrata Input shaft 16 5 M6 60 71 CMB 40 F.. CMBIS 40 F.. KA KP KB KC KO a1 KN KM KQ Flanga entrata Input flange C5 Kg 3.5 kg S Archesta On request D Standard Versone F / F Verson CMB CMBIS a 1 KA KB KC KM KN H8 KO KP KQ Flanga / Flange Tpo / Type 45 67 7.5 4.5 80-95 60 9 110 95 F 40 45 97 7.5 4.5 80-95 60 9 110 95 FL 45 80 8.5 5 115-15 95 9.5 140 11 FB CMB 40.. D.. - CMBIS 40.. D.. Albero uscta cavo Hollow output shaft 6 6 6 Ø18 H8 Ø0 H8 0.8.8 78 C1

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Dmenson Dmensons CMB 50.. - CMBIS 50.. CMB 50 U.. CMBIS 50 U.. 60 165.5 (1) /175.5 () 16.5 30 9 80 87 CMB 45 7 3 53 60 40 8.5 144 Ø70 f7 14 j6 64 84 (1) IEC 56/63/71 () IEC 80 4-M8x1 85 98 10 Flanga entrata Input flange C5 Kg (1) 4.7 kg () 5.0 kg Albero entrata Input shaft 16 M6 70 85 CMB 50 F.. CMBIS 50 F.. KA KB KP KC KO a1 KN KM KQ Flanga entrata Input flange C5 Kg 4.8 kg S Archesta On request D Standard Versone F / F Verson CMB CMBIS a 1 KA KB KC KM KN H8 KO KP KQ Flanga / Flange Tpo / Type 45 90 9 5 90-110 70 11 15 110 F 50 45 10 9 5 90-110 70 11 15 110 FL 45 89 9 5 130-145 110 9.5 160 13 FB CMB 50.. D.. - CMBIS 50.. D.. Albero uscta cavo Hollow output shaft 30 30 8 Ø5 H8 8.3 9 C13

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Dmenson Dmensons CMB 633.. - CMBIS 633.. CMB 633 U.. CMBIS 633 U.. 7 41 100 33 40 11 106 45 8 16 j6 7 50 8.5 174 10 80 Ø80 f7 5 95 110 144 7-M8x15 Flanga entrata Input flange C6 Kg 9.5 kg Albero entrata Input shaft 18 M6 85 104 CMB 633 F.. CMBIS 633 F.. KA KB KP KC KO a1 KN KM KQ Flanga entrata Input flange S A rchesta On request D Standard C6 Kg 9. kg Versone F / F Verson CMB CMBIS a 1 KA KB KC KM KN H8 KO KP KQ Flanga / Flange Tpo / Type 45 8 10 6 150-160 115 11 180 14 F 633 45 11 10 8 150-160 115 11 180 14 FL 45 98 11 5 165 130 11 00 160 FB CMB 633.. D.. - CMBIS 633.. D.. Albero uscta cavo Hollow output shaft 35 35 8 Ø5 H8 8.3 11 C14

Motorduttor ad ass ortogonal Helcal bevel gearmotors CMB Dmenson Dmensons CMB 903.. - CMBIS 903.. CMB 903 U.. CMBIS 903 U.. 103 87 79.5 40 140 140 134 CMB 45 11 19 j6 103 70 13 38 135 10 Ø110 f7 6 130 160 06 7-M10x0 Flanga entrata Input flange C7 Kg 18.4 kg Albero entrata Input shaft 1.5 M6 100 130 CMB 903 F.. CMBIS 903 F.. KA KP KB KC KO a1 KN KM KQ Flanga entrata Input flange S A rchesta On request D Standard C7 Kg 18.1 kg Versone F / F Verson CMB CMBIS a 1 KA KB KC KM KN H8 KO KP KQ Flanga / Flange Tpo / Type 903 45 111 13 6 175-188 15 14 10 00 F CMB 903.. D.. - CMBIS 903.. D.. Albero uscta cavo Hollow output shaft 45 45 10 Ø35 H8 38.3 140 C15

CMB Motorduttor ad ass ortogonal Helcal bevel gearmotors Accessor Accessores L G1 B1 B f b1 SZ DZ B1 B L1 G1 B1 B d d f t1 b1 t1 K1 R KG G KH Albero lento / Output shaft Bracco d reazone / Torque arm CMB CMBIS d h7 B B1 G1 L L1 f b1 t1 CMB CMBIS K1 G KG KH R 40 18 40 43 78 18 164 M6 6 0.5 50 5 50 53.5 9 153 199 M10 8 8 633 5 50 53.5 11 173 19 M10 8 8 903 35 80 84.5 140 34 309 M1 10 38 40 100 14 31 10 18 50 100 14 38 10 18 633 150 14 47.5 10 18 903 00 5 56.5 0 30 SC - Safety cover M 063 CMB CMBIS M 40 54.5 50 6.5 633 73 903 94 C16

KFT105 KFT105 KFT105 Motorduttor pendolar Helcal parallel gearmotors

Motorduttor pendolar Helcal parallel gearmotors KFT105 Pag. Page Indce Index Caratterstche tecnche Techncal features D Desgnazone Clascaton D Smbologa Symbols D3 Lubrfcazone Lubrcaton D3 Carch radal Radal loads D3 Dat tecnc Techncal data D4 Dat tecnc elettrc Electrcal techncal data D5 Dmenson Dmensons D6 KFT Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0915A D1

Motorduttor pendolar KFT105 Helcal parallel gearmotors Caratterstche tecnche I motorduttor pendolar della sere KFT105 hanno le seguent caratterstche prncpal: Costruzone compatta Motorzzazon n corrente alternata monofase e trfase Carcassa n pressofusone d allumno Ingranagg clndrc a dent elcodal Lubrfcazone permanente con olo sntetco Dsponbl a 3 e 4 stad d rduzone Techncal features KFT105 helcal parallel gearmotors range has the followng man features: Compact desgn AC sngle phase and three phase motors avalable De-cast alumnum housngs Helcal gears Permanent synthetc ol long-lfe lubrcaton Avalable wth 3 and 4 reducton stages Desgnazone Clascaton RIDUTTORE / GEARBOX KFT 105/3 U 88.87 O0 Tpo Type Grandezza Sze Versone Verson Rapporto Rato Albero cavo uscta Hollow output shaft KFT 105/3 105/4 U... F... ved tabelle see tables ved tabelle see tables MOTORE / MOTOR 40W 4p 3ph 30/400V 50Hz T1 TEFC Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. Ventlazone Fan coolng ved tabelle see tables p 4p 6p 1ph 3ph 30V... 30/400V... 50Hz 60Hz TEFC TENV D

Motorduttor pendolar Helcal parallel gearmotors KFT105 Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed n [mn -1 ] Veloctà n uscta / Output speed Rapporto d rduzone / Rato P 1 Potenza n entrata / Input power M Coppa nomnale n uscta n funzone d P 1 / Output torque referred to P 1 Pn 1 Potenza nomnale n entrata / Nomnal nput power Mn Coppa nomnale / Nomnal torque Fattore d servzo / Servce factor R [N] Carco radale ammssble n uscta / Permtted output radal load A [N] Carco assale ammssble n uscta / Permtted output axal load V [N] Tensone / Voltage F [Hz] Frequenza / Frequency I n [A] Corrente nomnale / Nomnal current I s [A] Corrente d spunto / Start current cosø Fattore d potenza / Power factor C [µ] Capactà del condensatore / Capactor Lubrfcazone Lubrcaton KFT Tutt motorduttor sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Carch radal Permanent synthetc ol long-lfe lubrcaton ( vscosty grade 30) makes t possble to use the gearmotors n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. Radal loads n [mn -1 ] R [N] KFT105 70 1500 40 1700 30 1850 0 000 = R x 0. 0 10 000 5 000 Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula: When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: Rc x R KFT105 a 8 b 6 R MAX 000 L R c R a (b +x) R MAX a, b = valor rportat nella tabella a, b = values gven n the table R R c D3

Motorduttor pendolar KFT105 Helcal parallel gearmotors Dat tecnc Techncal data P 1 [W] n [mn -1 ] M M n P 1 [W] n [mn -1 ] M M n 5 68 3 1.1 40 0.57 KFT105/3 4 5 9.4 50 33.3 3 7 9.1 65 44.36 6 9 7.4 65 54.87 19 1 5.6 65 71.84 18 1 5.3 65 77.07 16 14 4.6 65 88.87 11 0 3. 65 14.81 7.7 9. 65 181.35 6. 36 1.8 65 4.3 4.4 51 1.3 65 315.05 90 68 1 3.4 40 0.57 KFT105/3 4 19.6 50 33.3 3 6.5 65 44.36 6 3.1 65 54.87 19 41 1.6 65 71.84 18 44 1.5 65 77.07 16 51 1.3 65 88.87 11 7 0.9 65 14.81 7.7 105 0.6 65 181.35 6. 110 0.59 65 4.3 4.4 110 0.59 65 315.05 3.8 58 1.1 65 368.19 KFT105/4.6 84 0.8 65 534.98.1 104 0.63 65 661.76 1.5 10 0.54 65 99.40 3.8 10 0.54 65 368.19 KFT105/4.6 10 0.54 65 534.98.1 10 0.54 65 661.76 1.5 10 0.54 65 99.40 40 68 5 7.6 40 0.57 KFT105/3 4 9 5.9 50 33.3 3 11 5.7 65 44.36 6 14 4.6 65 54.87 19 18 3.5 65 71.84 18 0 3.3 65 77.07 16 3.9 65 88.87 11 3.0 65 14.81 7.7 47 1.4 65 181.35 6. 58 1.1 65 4.3 4.4 81 0.8 65 315.05 10 68 16.5 40 0.57 KFT105/3 4 6.0 50 33.3 3 34 1.9 65 44.36 6 4 1.5 65 54.87 19 55 1. 65 71.84 18 59 1.1 65 77.07 16 68 1.0 65 88.87 11 96 0.7 65 14.81 7.7 110 0.59 65 181.35 6. 110 0.59 65 4.3 4.4 110 0.59 65 315.05 3.8 9 0.7 65 368.19 KFT105/4.6 10 0.54 65 534.98.1 10 0.54 65 661.76 1.5 10 0.54 65 99.40 3.8 10 0.54 65 368.19 KFT105/4.6 10 0.54 65 534.98.1 10 0.54 65 661.76 1.5 10 0.54 65 99.40 60 68 8 5.1 40 0.57 KFT105/3 4 13 3.9 50 33.3 3 17 3.8 65 44.36 6 1 3.1 65 54.87 19 8.4 65 71.84 18 30. 65 77.07 16 34 1.9 65 88.87 11 48 1.4 65 14.81 7.7 70 0.9 65 181.35 6. 86 0.8 65 4.3 4.4 110 0.59 65 315.05 3.8 10 0.54 65 368.19 KFT105/4.6 10 0.54 65 534.98.1 10 0.54 65 661.76 1.5 10 0.54 65 99.40 N.B. Verfcare sempre che la coppa M utlzzata non ecceda l valore ndcato nelle caselle n grgo N.B. Please check that the output torque M does not exceed the value n the grey areas D4

Motorduttor pendolar Helcal parallel gearmotors KFT105 Dat tecnc elettrc Electrcal techncal data P n [W] V [V] F [Hz] I n [A] I s [A] cosø C [µf] 5 0.40 0.58 0.98 8.0 1 Ph 40 0.60 1.00 0.70 8.0 60 30 50 0.65 1.71 0.84 8.0 90 0.85 1.75 0.93 1.5 KFT 10 1.10 3.00 0.97 14.0 P n [W] V [V] F [Hz] I n [A] I s [A] cosø 3 Ph 5 40 60 90 10 30 0.43 0.69 0.55 50 400 0.5 0.40 0.55 30 0.5 0.95 0.55 50 400 0.30 0.55 0.55 30 0.61 1.1 0.64 50 400 0.35 0.70 0.64 30 0.69 1.56 0.70 50 400 0.40 0.90 0.70 30 0.80.40 0.7 50 400 0.46 1.35 0.7 D5

Ø8.5 n 4 Ø8.5 n 4 Motorduttor pendolar KFT105 Helcal parallel gearmotors Dmenson Dmensons KFT 105... 5W - 40W - 60W - 90W KFT 105...1 Ph...TEFC KFT 105...1 Ph...TENV 5 Ø9 11.5 7.5 11.5 7.5 54.5 108 6 138 105 5 Ø105 Lamature Ø14 Prof. 10 mm n 4 Spot-facng Ø14 Deep 10 mm n 4 Ø97 TEFC - 10 / TENV - 06.5 73.5 78.5 NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes 80 100 KFT 105...3 Ph... TEFC KFT 105...3 Ph... TENV 5 Ø9 09.5 184.5 54.5 81 6 138 105 5 Ø105 Ø97 Lamature Ø14 Prof. 10 mm n 4 Spot-facng Ø14 Deep 10 mm n 4 TEFC - 10 / TENV - 06.5 73.5 78.5 NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes 80 100 O17 O0 Albero uscta cavo Hollow output shaft Albero uscta cavo Hollow output shaft 5 5 5 5 5 6 19.8.3* 78.5 Ø17 H8 78.5 Ø0 H8 *Sede lnguetta rbassata / Specal Keyway D6

Ø8.5 n 4 Ø8.5 n 4 Motorduttor pendolar Helcal parallel gearmotors KFT105 Dmenson Dmensons KFT 105... 10W KFT 105...1 Ph... TEFC KFT 105...1 Ph...TENV 5 Ø9 9.5 9.5 11.5 7.5 54.5 108 6 138 105 5 Ø105 Lamature Ø14 Prof. 10 mm n 4 Spot-facng Ø14 Deep 10 mm n 4 Ø97 TEFC - 10 / TENV - 06 KFT.5 73.5 78.5 NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes 80 100 KFT 105...3 Ph... TEFC KFT 105...3 Ph... TENV 5 Ø9 9.5 04.5 54.5 81 6 138 105 5 Ø105 Lamature Ø14 Prof. 10 mm n 4 Spot-facng Ø14 Deep 10 mm n 4 Ø97 TEFC - 10 / TENV - 06.5 73.5 78.5 NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes 80 100 O17 O0 Albero uscta cavo Hollow output shaft Albero uscta cavo Hollow output shaft 5 5 5 5 5 6 19.8.3* 78.5 Ø17 H8 78.5 Ø0 H8 *Sede lnguetta rbassata/ Specal Keyway D7

Motorduttor pendolar KFT105 Helcal parallel gearmotors Note/Notes D8

FT FT FT Motorduttor pendolar Helcal parallel gearmotors

Motorduttor pendolar Helcal parallel gearmotors FT Pag. Page Indce Index Caratterstche tecnche Techncal features E Desgnazone Clascaton E Sens d rotazone Drecton of rotaton E3 Smbologa Symbols E3 Lubrfcazone Lubrcaton E3 Carch radal Radal loads E4 Dat tecnc Techncal data E5 Dmenson Dmensons E8 FT Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0617A E1

FT Motorduttor pendolar Helcal parallel gearmotors Caratterstche tecnche I motorduttor pendolar della sere FT hanno le seguent caratterstche prncpal: Carcassa n pressofusone d allumno Lubrfcazone permanente con olo sntetco. Ingranagg clndrc a dent elcodal. Techncal features FT helcal parallel gearmotors range has the followng man features: De-cast alumnum housngs Permanent synthetc ol long-lfe lubrcaton. helcal gears. Desgnazone Clascaton RIDUTTORE / GEARBOX FT 146 U 60.63 O0 56 B5 Tpo Type Grandezza Sze Versone Verson Rapporto Rato Albero cavo uscta Hollow output shaft IEC Forma costruttva Verson FT 105/3 105/4 146 196 U... ved tabelle see tables ved tabelle see tables 56 63 71 80 90 B5 B14 MOTORE / MOTOR 0.09kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. ved tabelle see tables p 4p 6p 8p 1ph 3ph 30V 30/400V 50Hz 60Hz T3 E

Sens d rotazone Motorduttor pendolar Helcal parallel gearmotors FT Drecton of rotaton FT105/3 FT146 FT196 FT FT105/4 Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed n [mn -1 ] Veloctà n uscta / Output speed Rapporto d rduzone / Rato P 1 Potenza n entrata / Input power M Coppa nomnale n uscta n funzone d P 1 / Output torque referred to P 1 Pn 1 Potenza nomnale n entrata / Nomnal nput power Mn Coppa nomnale n uscta n funzone d Pn 1 / Nomnal output torque referred to Pn 1 Fattore d servzo / Servce factor R [N] Carco radale ammssble n uscta / Permtted output radal load A [N] Carco assale ammssble n uscta / Permtted output axal load Lubrfcazone Tutt motorduttor sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton ( vscosty grade 30) makes t possble to use the gearmotors n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. E3

FT Motorduttor pendolar Helcal parallel gearmotors Carch radal Radal loads n [mn -1 ] R [N] FT105 FT146 FT196 70 1500 500 3500 40 1700 700 4000 30 1850 850 4600 0 000 3000 5500 10 000 3000 7000 = R x 0. 5 000 3000 7000 FT105 FT146 FT196 c= 0 mm c= 0 mm c= 30 mm c Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula: When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: Rc x R FT105 FT146 FT196 a 8 8,5 13 b 6 6,5 10 R MAX 000 3000 7000 L R c R a (b +x) R MAX a, b = valor rportat nella tabella a, b = values gven n the table R R c E4

Motorduttor pendolar Helcal parallel gearmotors Dat tecnc n 1 1400 mn -1 FT Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters FT105 FT105/3 FT105/4 68 40 0.30 0.57 4 50 0.3 33.3 3 65 0.3 44.36 6 65 0.18 54.87 0 65 0.14 71.84 18 65 0.13 77.07 16 65 0.11 88.87 11 65 0.081 14.81 7.7 65 0.056 181.35 6. 65 0.045 4.3 4.4 65 0.03 315.05 3.8 65 0.08 368.19.6 65 0.019 534.98.1 65 0.015 661.76 1.5 65 0.011 99.40 56B14 FT FT146 FT196 75 0.65 18.75 53 80 0.47 6.17 50 0.43 8.6 40 0.44 35.07 35 0.39 39.44 100 30 0.33 46.44 6 0.9 5.86 3 0.8 60.63 0 0.4 70.00 17 0.0 84.63 15 110 0.18 95.61 1 0.15 113.40 10 0.13 133.45 9.3 0.11 150.18 8.7 0.11 160.43 7.8 0.10 178.83 6.3 0.08 3.9 10 5.9 0.077 36.83 4.7 0.061 300.07 3.5 0.046 397.38 69 350.6 0.41 40 400 1.8 34.81 33 450 1.6 4.61 4 500 1.3 59.36 19 1.1 7.68 15 0.9 9.8 11 0.69 13.95 8.9 550 0.51 158.0 6.9 0.4 01.80 5. 0.3 69.47 56 B5/B14 63 B5/B14 71 B5/B14 * * * * * * * * * * * * 71 B5/B14 80 B5/B14 90 B5/B14 N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle pag. E6. N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page E6. Dmenson IEC / IEC Dmensons 56 B5 56 B14 63 B5 63 B14 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 N 80 50 95 60 110 70 130 80 130 95 M 100 65 115 75 130 85 165 100 165 115 P 10 80 140 90 160 105 00 10 00 140 9 11 14 19 4 E5

FT Motorduttor pendolar Helcal parallel gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.09 56B4 68 1 3.4 0.57 FT105/3 B14 (1400 mn -1 ) 4 19.6 33.3 B14 3 6.5 44.36 B14 6 3.1 54.87 B14 0 41 1.6 71.84 B14 18 44 1.5 77.07 B14 16 51 1.3 88.87 B14 11 7 0.90 14.81 B14 7.7 105 0.6 181.35 B14 6. 110 0.59 4.3 B14 4.4 110 0.59 315.05 B14 3.8 10 0.54 368.19 FT105/4 B14.6 10 0.54 534.98 B14.1 10 0.54 661.76 B14 1.5 10 0.54 99.40 B14 75 11 7.4 18.75 FT146 B5/B14 53 15 5.3 6.17 B5/B14 50 16 4.9 8.6 B5/B14 40 0 4.9 35.07 B5/B14 35 3 4.4 39.44 B5/B14 30 7 3.7 46.44 B5/B14 7 31 3.3 5.86 B5/B14 3 35 3.1 60.63 B5/B14 0 40.7 70.00 B5/B14 17 49.3 84.63 B5/B14 15 55.0 95.61 B5/B14 1 65 1.7 113.40 B5/B14 10 77 1.4 133.45 B5/B14 9.3 87 1.3 150.18 B5/B14 8.7 93 1.3 160.43 B5/B14 7.8 103 1. 178.83 B5/B14 6.3 19 0.94 3.9 B5/B14 5.9 137 0.88 36.83 B5/B14 4.7 170 0.70 300.07 B5/B14 3.5 170 0.70 397.38 B5/B14 0.1 63A4 75 14 5.6 18.75 FT146 B5/B14 (1400 mn -1 ) 53 0 4.0 6.17 B5/B14 50 3.7 8.6 B5/B14 40 7 3.7 35.07 B5/B14 35 30 3.3 39.44 B5/B14 30 36.8 46.44 B5/B14 6 41.5 5.86 B5/B14 3 47.4 60.63 B5/B14 0 54.0 70.00 B5/B14 17 65 1.7 84.63 B5/B14 15 74 1.5 95.61 B5/B14 1 87 1.3 113.40 B5/B14 10 103 1.1 133.45 B5/B14 9.3 116 0.95 150.18 B5/B14 8.7 13 0.97 160.43 B5/B14 7.8 138 0.87 178.83 B5/B14 6.3 17 0.70 3.9 B5/B14 0.18 63B4 75 3.7 18.75 FT146 B5/B14 (1400 mn -1 ) 53 30.6 6.17 B5/B14 50 33.5 8.6 B5/B14 40 40.5 35.07 B5/B14 35 46. 39.44 B5/B14 30 54 1.9 46.44 B5/B14 6 61 1.6 5.86 B5/B14 3 70 1.6 60.63 B5/B14 0 81 1.4 70.00 B5/B14 17 98 1.1 84.63 B5/B14 15 110 1.0 95.61 B5/B14 1 131 0.84 113.40 B5/B14 10 154 0.7 133.45 B5/B14 0. 63C4 75 6 3.0 18.75 FT146 B5/B14 (1400 mn -1 ) 53 37. 6.17 B5/B14 50 40.0 8.6 B5/B14 40 49.0 35.07 B5/B14 35 56 1.8 39.44 B5/B14 30 66 1.5 46.44 B5/B14 6 75 1.3 5.86 B5/B14 3 86 1.3 60.63 B5/B14 0 99 1.1 70.00 B5/B14 17 119 0.93 84.63 B5/B14 15 135 0.8 95.61 B5/B14 N.B. Verfcare sempre che la coppa M utlzzata non ecceda l valore ndcato nelle caselle n grgo N.B. Please check that the output torque M does not exceed the value n the grey areas E6

Motorduttor pendolar Helcal parallel gearmotors FT Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 71A4 75 30.7 18.75 FT146 B5/B14 (1400 mn -1 ) 53 4 1.9 6.17 B5/B14 50 45 1.8 8.6 B5/B14 40 56 1.8 35.07 B5/B14 35 63 1.6 39.44 B5/B14 30 74 1.3 46.44 B5/B14 6 85 1. 5.86 B5/B14 3 97 1.1 60.63 B5/B14 0 11 0.98 70.00 B5/B14 17 136 0.81 84.63 B5/B14 15 153 0.7 95.61 B5/B14 0.37 69 33 10.7 0.41 FT196 B5/B14 40 56 7. 34.81 B5/B14 33 68 6.6 4.61 B5/B14 4 95 5.3 59.36 B5/B14 19 117 4.7 7.68 B5/B14 15 149 3.7 9.8 B5/B14 11 199.8 13.95 B5/B14 8.9 53. 158.0 B5/B14 6.9 33 1.7 01.80 B5/B14 5. 43 1.3 69.47 B5/B14 71B4 75 44 1.8 18.75 FT146 B5/B14 (1400 mn -1 ) 53 6 1.3 6.17 B5/B14 50 67 1. 8.6 B5/B14 40 83 1. 35.07 B5/B14 35 94 1.1 39.44 B5/B14 30 110 0.91 46.44 B5/B14 6 15 0.80 5.86 B5/B14 3 144 0.76 60.63 B5/B14 0.75 80B4 69 98 3.6 0.41 FT196 B5/B14 (1400 mn -1 ) 40 167.4 34.81 B5/B14 33 05. 4.61 B5/B14 4 85 1.8 59.36 B5/B14 19 350 1.6 7.68 B5/B14 15 446 1. 9.8 B5/B14 11 596 0.9 13.95 B5/B14 1.1 90S4 69 144.4 0.41 FT196 B5/B14 (1400 mn -1 ) 40 46 1.6 34.81 B5/B14 33 301 1.5 4.61 B5/B14 4 419 1. 59.36 B5/B14 19 513 1.1 7.68 B5/B14 15 655 0.84 9.8 B5/B14 1.5 90L4 69 196 1.8 0.41 FT196 B5/B14 (1400 mn -1 ) 40 335 1. 34.81 B5/B14 33 410 1.1 4.61 B5/B14 4 571 0.88 59.36 B5/B14 19 699 0.79 7.68 B5/B14 FT 69 48 7. 0.41 FT196 B5/B14 40 83 4.8 34.81 B5/B14 33 101 4.5 4.61 B5/B14 4 141 3.6 59.36 B5/B14 19 17 3. 7.68 B5/B14 15 0.5 9.8 B5/B14 11 94 1.9 13.95 B5/B14 8.9 375 1.5 158.0 B5/B14 6.9 479 1.1 01.80 B5/B14 5. 639 0.86 69.47 B5/B14 0.55 80A4 69 7 4.9 0.41 FT196 B5/B14 (1400 mn -1 ) 40 13 3. 34.81 B5/B14 33 150 3.0 4.61 B5/B14 4 09.4 59.36 B5/B14 19 55.1 7.68 B5/B14 15 37 1.7 9.8 B5/B14 11 437 1.3 13.95 B5/B14 8.9 557 1.0 158.0 B5/B14 6.9 71 0.77 01.80 B5/B14 E7

FT Motorduttor pendolar Helcal parallel gearmotors Dmenson Dmensons FT 105 FT 105...U 99 181 105 Ø8.5 n 4 Lamature Ø14 Prof. 10 mm n 4 Spot-facng Ø14 Deep 10 mm n 4 5.5 73.5 78.5 Kg 4. 80 100 IEC Motor applcabl IEC Motor adapters NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes E5 O17 O0 Albero uscta cavo Hollow output shaft Albero uscta cavo Hollow output shaft 5 5 5 5 5 6 19.8.3* 78.5 Ø17 H8 78.5 Ø0 H8 *: Sede lnguetta rbassata / Specal keyway E8

Motorduttor pendolar Helcal parallel gearmotors FT Dmenson Dmensons FT 146 FT 146 U 94 Lamature Ø14 Prof. 9.5 mm n 4 Spot-facng Ø14 Deep 9.5 mm n 4 M8x1 n 8 Ø80 Ø100 38 146 FT Ø8.5 n 4 6.5 40 80 Kg 4.7 100 15 IEC Motor applcabl IEC Motor adapters NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes E5 30 O0 Albero uscta cavo Hollow output shaft 30 6 Ø8.5 Ø8.5.8 7 7 79 Ø0 H8 E9

FT Motorduttor pendolar Helcal parallel gearmotors Dmenson FT 196 U FT 196 Dmensons 19 (IEC 19 71-80) 139 (IEC 90) Lamature Ø14 Prof. 11 mm n 4 Spot-facng Ø14 Deep 11 mm n 4 M8x15 n 6-45 Ø95 15 Kg 1.1 IEC Motor applcabl IEC Motor adapters NOTA: Stess fssagg da entramb lat NOTE: Same fxng ponts n both sdes E5 O30 Albero uscta cavo Hollow output shaft O35 Albero uscta cavo Hollow output shaft 35 35 8 35 35 10 33.3 38.3 315 196 Ø8.5 n 4 84 3 1 M8x15 n 6-60 18 Ø100 168 18 Ø30 H8 18 Ø35 H8 E10

ATS ATS ATS Motorduttor pendolar Helcal parallel gearmotors

Motorduttor pendolar Helcal parallel gearmotors ATS Pag. Page Indce Index Caratterstche tecnche Techncal features F Desgnazone Clascaton F3 Sens d rotazone Drecton of rotaton F4 Smbologa Symbols F4 Lubrfcazone Lubrcaton F4 Carch radal Radal loads F5 Dat tecnc Techncal data F6 Dmenson Dmensons F1 Accessor Accessores F16 ATS Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0817A F1

ATS Motorduttor pendolar Helcal parallel gearmotors Caratterstche tecnche I motorduttor pendolar della sere ATS sono caratterzzat da un elevato grado d modulartà: partendo da un corpo d base è possble confgurarlo secondo le esgenze con dvers kt n entrata ed n uscta. Caratterstche comun a tutta la sere: Carcassa e flanga PAM n pressofusone d allumno Lubrfcazone permanente con olo sntetco. Flange d uscta n ghsa. Techncal features The hgh degree of modularty s a desgn feature of ATS helcal parallel range. It s possble to set up the verson requred by usng nput and output kts. The man features of ATS range are: De-cast alumnum housngs and nput flanges Permanent synthetc ol long-lfe lubrcaton. Cast ron output flanges. F

Motorduttor pendolar Helcal parallel gearmotors ATS Desgnazone Clascaton Versone Rduttore Gearbox Verson Albero d uscta Output shaft U F SZ RIDUTTORE / GEARBOX ATS 90 U 9.65 D35 90 B5 SZ Tpo Type Grandezza Sze Stad Stages Versone Verson Rapporto Rato Albero cavo uscta Hollow output shaft IEC Forma costruttva Verson Albero uscta mascho Sold output shaft ATS 90 91 3 U... F... ved tabelle see tables ved tabelle see tables 63.. 11.. B5 B14 SZ ATS Versone Rduttore Gearbox Verson Albero d uscta Output shaft U F SZ RIDUTTORE / GEARBOX ATSIS 90 U 9.65 D35 SZ Tpo Type Grandezza Sze Stad Stages Versone Verson Rapporto Rato Albero cavo uscta Hollow output shaft Albero uscta mascho Sold output shaft ATSIS 90 91 3 U... F... ved tabelle see tables ved tabelle see tables SZ MOTORE / MOTOR 0.75kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. ved tabelle see tables p 4p 6p 8p 1ph 3ph 30V 30/400V 50Hz 60Hz T3 F3

ATS Motorduttor pendolar Helcal parallel gearmotors Sens d rotazone Drecton of rotaton ATS... ATSIS.. ATS...3 ATSIS..3 Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed n [mn -1 ] Veloctà n uscta / Output speed Rapporto d rduzone / Rato P 1 Potenza n entrata / Input power M Coppa nomnale n uscta n funzone d P 1 / Output torque referred to P 1 Pn 1 Potenza nomnale n entrata / Nomnal nput power Mn Coppa nomnale n uscta n funzone d Pn 1 / Nomnal output torque referred to Pn 1 Fattore d servzo / Servce factor R [N] Carco radale ammssble n uscta / Permtted output radal load A [N] Carco assale ammssble n uscta / Permtted output axal load Lubrfcazone Tutt motorduttor sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton ( vscosty grade 30) makes t possble to use the gearmotors n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. F4

Motorduttor pendolar Helcal parallel gearmotors ATS Carch radal Radal loads n [mn -1 ] ATS 90 ATS 903 R [N] ATS 91 ATS 913 40 400 3600 180 400 400 150 400 400 10 500 4600 100 800 4800 85 3090 5100 70 3150 550 = R x 0. 55 3630 6000 40 4440 6900 30 5100 7800 0 6000 9500 ATS 15 6000 10000 10 6000 10000 5 6000 10000 Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula: When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: Rc x R ATS 90 ATS 903 ATS 91 ATS 913 a 15 174.5 b 97 114.5 R MAX 6000 10000 L R c R a (b +x) R MAX a, b = valor rportat nella tabella a, b = values gven n the table R R c F5

ATS Motorduttor pendolar Helcal parallel gearmotors Dat tecnc n 1 1400 mn -1 Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters ATSIS 90 ATSIS 903 39 00 5. 5.87 178 50 4.9 7.87 148 300 4.8 9.47 11 350 4.6 11.53 106 350 4.0 13.6 89.3 350 3.4 15.68 84.0 350 3. 16.68 73.3 400 3. 19.09 63.7 400.8 1.96 5.8 400.3 6.50 50.7 400. 7.61 47. 400.1 9.65 41.8 400 1.8 33.49 39.0 400 1.7 35.87 36.6 400 1.6 38.9 31.9 400 1.4 43.88 8.5 400 1.3 49.09 6.6 400 1. 5.71 5. 400 1.1 55.45.1 400 0.98 63.41 19.0 400 0.85 73.64 16.0 400 0.71 87.7 14.0 400 0.6 100.33 11.1 400 0.50 15.89 10.6 400 0.47 131.65 10.0 400 0.45 139.88 9.3 400 0.41 151.07 8.4 400 0.38 166.13 8.1 400 0.36 17.40 6.7 400 0.30 08.45 6.3 400 0.8 3.41 5.6 400 0.5 50.14 4.3 400 0.19 33.65 4.1 400 0.18 345.59 3.7 400 0.17 376.15 3.3 400 0.15 44.1 71 B5 80 B5/B14 90 B5/B14 100 B5/B14 11 B5/B14 B B B B B B B * B * B * B * B * B * B * * B * * B * * B * * B * * B * * B * * B * * * B * * * B * * * 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. B = Boccola d rduzone n accao. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. F8 alla pag. F11 N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. B = Metal shaft sleeve. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page F8 to F11. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 100/11 B5 100/11 B14 N 95 110 70 130 80 130 95 180 110 M 115 130 85 165 100 165 115 15 130 P 140 160 105 00 10 00 140 50 160 D 11 14 19 4 8 F6

Motorduttor pendolar Helcal parallel gearmotors Dat tecnc n 1 1400 mn -1 ATS Techncal data n [mn -1 ] Mn Pn 1 IEC Motor applcabl IEC Motor adapters ATSIS 91 71 B5 80 B5/B14 90 B5/B14 100 B5/B14 11 B5/B14 45.0 350 9.4 5.71 183 350 7.0 7.66 158 400 6.9 8.85 15 400 6.6 9. 15 400 5.4 11.3 118 400 5.1 11.87 108 500 5.9 1.9 98.0 500 5.3 14.9 86. 500 4.7 16.4 80.5 500 4.4 17.39 70.0 600 4.6 0.01 66.3 600 4.3 1.10 55.6 600 3.6 5.16 54. 600 3.5 5.81 48.5 600 3. 8.88 4.8 600.9 3.69 37.5 600.5 37.30 35.0 600.3 39.98 31.3 600.1 44.73 7.7 600 1.9 50.53 4. 600 1.6 57.77 0.9 600 1.4 67.09 17.6 600 1. 79.5 B B B B B B B B B B B B B B * B * B * B * B * B * B * * B * * B * * B * * ATS ATSIS913 63 B5 71 B5/B14 80 B5/B14 90 B5/B14 17.0 600 1.1 8.8 14.9 600 1.0 93.96 13.8 600 0.9 101.41 11.4 600 0.76 1.61 10.7 600 0.71 131.41 9.5 600 0.64 147.13 8.9 600 0.60 157.08 7.4 600 0.49 189.9 6.9 600 0.46 03.55 6.1 600 0.41 7.91 4.7 600 0.3 94.88 4.4 600 0.30 314.87 4.1 600 0.7 34.7 3.6 600 0.4 386.51 * * * * * * * * * * * * * * * * * * N.B. Le aree evdenzate ndcano l applcabltà della corrspondente grandezza motore. B = Boccola d rduzone n accao. * = Il fattore d servzo () deve essere scelto n funzone dell applcazone: s prega d contattare l nostro Servzo Tecnco. Prma d esegure la scelta del motorduttore rferrs alle prestazon elencate nelle tabelle dalla pag. F8 alla pag. F11 N.B. Hghlghted areas ndcate motor nputs avalable on each sze of unt. B = Metal shaft sleeve. * = The servce factor () has to be selected dependng on applcaton: please contact our Techncal Department. Before selectng any gearbox, please read the performance values shown n the tables on page F8 to F11. Dmenson IEC / IEC Dmensons 63 B5 71 B5 71 B14 80 B5 80 B14 90 B5 90 B14 100/11 B5 100/11 B14 N 95 110 70 130 80 130 95 180 110 M 115 130 85 165 100 165 115 15 130 P 140 160 105 00 10 00 140 50 160 D 11 14 19 4 8 F7

ATS Motorduttor pendolar Helcal parallel gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.1 63A4 14.0 77 5. 100.33 ATS903 B5 (1400 mn -1 ) 11.1 97 4.1 15.89 B5 10.6 101 3.9 131.65 B5 10.0 108 3.7 139.88 B5 9.3 116 3.4 151.07 B5 8.4 18 3.1 166.13 B5 8.1 133 3.0 17.40 B5 6.7 160.5 08.45 B5 6.3 17.3 3.41 B5 5.6 19.1 50.14 B5 4.3 49 1.6 33.65 B5 4.1 66 1.5 345.59 B5 3.7 89 1.4 376.15 B5 3.3 36 1. 44.1 B5 0.18 6.9 157 3.8 03.55 ATS913 B5 6.1 175 3.4 7.91 B5 4.7 7.6 94.88 B5 4.4 4.5 314.87 B5 4.1 64.3 34.7 B5 3.6 97.0 386.51 B5 63B4 14.0 116 3.5 100.33 ATS903 B5 (1400 mn -1 ) 11.1 145.8 15.89 B5 10.6 15.6 131.65 B5 10.0 161.5 139.88 B5 9.3 174.3 151.07 B5 8.4 19.1 166.13 B5 8.1 199.0 17.40 B5 6.7 41 1.7 08.45 B5 6.3 58 1.6 3.41 B5 5.6 89 1.4 50.14 B5 4.3 374 1.1 33.65 B5 4.1 399 1.0 345.59 B5 3.7 434 0.9 376.15 B5 3.3 490 0.8 44.1 B5 9.5 170 3.5 147.13 ATS913 B5 8.9 181 3.3 157.08 B5 7.4 19.7 189.9 B5 6.9 35.6 03.55 B5 6.1 63.3 7.91 B5 4.7 340 1.8 94.88 B5 4.4 363 1.7 314.87 B5 4.1 396 1.5 34.7 B5 3.6 446 1.3 386.51 B5 0.5 71A4 38 10 0.8 5.87 ATS90 B5 (1400 mn -1 ) 178 13 19.4 7.87 B5 148 16 19.3 9.47 B5 11 19 18.5 11.53 B5 106 16.1 13.6 B5 89.3 6 13.6 15.68 B5 84.0 7 1.8 16.68 B5 73.3 31 1.8 19.09 B5 63.7 36 11.1 1.96 B5 5.8 43 9. 6.50 B5 50.7 45 8.8 7.61 B5 47. 49 8. 9.65 B5 41.8 55 7.3 33.49 B5 39.0 59 6.8 35.87 B5 36.6 61 6.5 38.9 B5 31.9 70 5.7 43.88 B5 8.5 79 5.1 49.09 B5 6.6 84 4.7 5.71 B5 5. 89 4.5 55.45 B5.1 10 3.9 63.41 B5 19.0 118 3.4 73.64 B5 16.0 140.9 87.7 B5 14.0 161.5 100.33 ATS903 B5/B14 11.1 0.0 15.89 B5/B14 10.6 11 1.9 131.65 B5/B14 10.0 4 1.8 139.88 B5/B14 9.3 4 1.7 151.07 B5/B14 8.4 66 1.5 166.13 B5/B14 8.1 76 1.4 17.40 B5/B14 6.7 334 1. 08.45 B5/B14 6.3 358 1.1 3.41 B5/B14 5.6 401 1.0 50.14 B5/B14 13.8 163 3.7 101.41 ATS913 B5/B14 11.4 197 3.1 1.61 B5/B14 10.7 11.8 131.41 B5/B14 9.5 36.5 147.13 B5/B14 8.9 5.4 157.08 B5/B14 7.4 304.0 189.9 B5/B14 6.9 36 1.8 03.55 B5/B14 6.1 365 1.6 7.91 B5/B14 4.7 473 1.3 94.88 B5/B14 4.4 505 1. 314.87 B5/B14 4.1 549 1.1 34.7 B5/B14 3.6 60 1.0 386.51 B5/B14 F8

Motorduttor pendolar Helcal parallel gearmotors ATS Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.37 71B4 39 14 14.1 5.87 ATS90 B5 (1400 mn -1 ) 178 19 13.1 7.87 B5 148 3 13.1 9.47 B5 11 8 1.5 11.53 B5 106 3 10.9 13.6 B5 89.3 38 9. 15.68 B5 84.0 40 8.7 16.68 B5 73.3 46 8.6 19.09 B5 63.7 53 7.5 1.96 B5 5.8 64 6. 6.50 B5 50.7 67 6.0 7.61 B5 47. 7 5.6 9.65 B5 41.8 81 4.9 33.49 B5 39.0 87 4.6 35.87 B5 36.6 91 4.4 38.9 B5 31.9 104 3.8 43.88 B5 8.5 116 3.4 49.09 B5 6.6 15 3. 5.71 B5 5. 13 3.0 55.45 B5.1 150.7 63.41 B5 19.0 175.3 73.64 B5 16.0 07 1.9 87.7 B5 0.55 80A4 39 1 9.5 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 8 8.8 7.87 B5/B14 148 34 8.8 9.47 B5/B14 11 4 8.4 11.53 B5/B14 106 48 7.3 13.6 B5/B14 89.3 56 6. 15.68 B5/B14 84.0 60 5.8 16.68 B5/B14 73.3 69 5.8 19.09 B5/B14 63.7 79 5.1 1.96 B5/B14 5.8 95 4. 6.50 B5/B14 50.7 99 4.0 7.61 B5/B14 47. 107 3.7 9.65 B5/B14 41.8 11 3.3 33.49 B5/B14 39.0 19 3.1 35.87 B5/B14 36.6 135 3.0 38.9 B5/B14 31.9 155.6 43.88 B5/B14 8.5 173.3 49.09 B5/B14 6.6 186. 5.71 B5/B14 5. 196.0 55.45 B5/B14.1 4 1.8 63.41 B5/B14 19.0 60 1.5 73.64 B5/B14 16.0 308 1.3 87.7 B5/B14 ATS 14.0 38 1.7 100.33 ATS903 B5/B14 11.1 99 1.3 15.89 B5/B14 10.6 31 1.3 131.65 B5/B14 10.0 33 1. 139.88 B5/B14 9.3 358 1.1 151.07 B5/B14 8.4 394 1.0 166.13 B5/B14 8.1 409 1.0 17.40 B5/B14 4. 137 4.4 57.77 ATS91 B5 0.9 159 3.8 67.09 B5 17.6 189 3. 79.5 B5 17.0 195 3.1 8.8 ATS913 B5/B14 14.9 3.7 93.96 B5/B14 13.8 41.5 101.41 B5/B14 11.4 91.1 1.61 B5/B14 10.7 31 1.9 131.41 B5/B14 9.5 349 1.7 147.13 B5/B14 8.9 373 1.6 157.08 B5/B14 7.4 451 1.3 189.9 B5/B14 6.9 483 1. 03.55 B5/B14 6.1 541 1.1 7.91 B5/B14 4.7 700 0.9 94.88 B5/B14 14.0 354 1.1 100.33 ATS903 B5/B14 11.1 444 0.9 15.89 B5/B14 10.6 464 0.9 131.65 B5/B14 31.3 158 3.8 44.73 ATS91 B5/B14 7.7 178 3.4 50.53 B5/B14 4. 04.9 57.77 B5/B14 0.9 37.5 67.09 B5/B14 17.6 80.1 79.5 B5/B14 17.0 90.1 8.8 ATS913 B5/B14 14.9 331 1.8 93.96 B5/B14 13.8 358 1.7 101.41 B5/B14 11.4 43 1.4 1.61 B5/B14 10.7 463 1.3 131.41 B5/B14 9.5 519 1. 147.13 B5/B14 8.9 554 1.1 157.08 B5/B14 7.4 670 0.9 189.9 B5/B14 F9

ATS Motorduttor pendolar Helcal parallel gearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.75 80B4 39 9 6.9 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 39 6.5 7.87 B5/B14 148 47 6.4 9.47 B5/B14 11 57 6. 11.53 B5/B14 106 65 5.4 13.6 B5/B14 89.3 77 4.5 15.68 B5/B14 84.0 8 4.3 16.68 B5/B14 73.3 94 4.3 19.09 B5/B14 63.7 108 3.7 1.96 B5/B14 5.8 130 3.1 6.50 B5/B14 50.7 136.9 7.61 B5/B14 47. 146.7 9.65 B5/B14 41.8 164.4 33.49 B5/B14 39.0 176.3 35.87 B5/B14 36.6 184. 38.9 B5/B14 31.9 11 1.9 43.88 B5/B14 8.5 36 1.7 49.09 B5/B14 6.6 53 1.6 5.71 B5/B14 5. 67 1.5 55.45 B5/B14.1 305 1.3 63.41 B5/B14 19.0 354 1.1 73.64 B5/B14 16.0 40 1.0 87.7 B5/B14 4.8 157 3.8 3.69 ATS91 B5/B14 37.5 179 3.3 37.30 B5/B14 35.0 19 3.1 39.98 B5/B14 31.3 15.8 44.73 B5/B14 7.7 43.5 50.53 B5/B14 4. 78. 57.77 B5/B14 0.9 33 1.9 67.09 B5/B14 17.6 38 1.6 79.5 B5/B14 17.0 396 1.5 8.8 ATS913 B5/B14 14.9 45 1.3 93.96 B5/B14 13.8 488 1. 101.41 B5/B14 11.4 590 1.0 1.61 B5/B14 10.7 63 0.9 131.41 B5/B14 1.1 90S4 39 4 4.7 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 57 4.4 7.87 B5/B14 148 68 4.4 9.47 B5/B14 11 83 4. 11.53 B5/B14 106 96 3.7 13.6 B5/B14 89.3 113 3.1 15.68 B5/B14 84.0 10.9 16.68 B5/B14 73.3 138.9 19.09 B5/B14 63.7 158.5 1.96 B5/B14 5.8 191.1 6.50 B5/B14 50.7 199.0 7.61 B5/B14 47. 14 1.9 9.65 B5/B14 41.8 41 1.7 33.49 B5/B14 39.0 58 1.5 35.87 B5/B14 36.6 70 1.5 38.9 B5/B14 31.9 310 1.3 43.88 B5/B14 8.5 346 1. 49.09 B5/B14 6.6 37 1.1 5.71 B5/B14 5. 391 1.0 55.45 B5/B14 66.3 15 3.9 1.10 ATS91 B5/B14 55.6 181 3.3 5.16 B5/B14 54. 186 3. 5.81 B5/B14 48.5 04.9 8.88 B5/B14 4.8 31.6 3.69 B5/B14 37.5 63.3 37.30 B5/B14 35.0 8.1 39.98 B5/B14 31.3 315 1.9 44.73 B5/B14 7.7 356 1.7 50.53 B5/B14 4. 407 1.5 57.77 B5/B14 0.9 473 1.3 67.09 B5/B14 17.6 561 1.1 79.5 B5/B14 17.0 580 1.0 8.8 ATS913 B5/B14 14.9 663 0.9 93.96 B5/B14 F10

Motorduttor pendolar Helcal parallel gearmotors ATS Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 1.5 90L4 39 58 3.5 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 77 3. 7.87 B5/B14 148 93 3. 9.47 B5/B14 11 113 3.1 11.53 B5/B14 106 130.7 13.6 B5/B14 89.3 154.3 15.68 B5/B14 84.0 164.1 16.68 B5/B14 73.3 188.1 19.09 B5/B14 63.7 16 1.9 1.96 B5/B14 5.8 60 1.5 6.50 B5/B14 50.7 71 1.5 7.61 B5/B14 47. 91 1.4 9.65 B5/B14 41.8 39 1. 33.49 B5/B14 39.0 35 1.1 35.87 B5/B14 36.6 368 1.1 38.9 B5/B14 31.9 4 0.9 43.88 B5/B14. 100LA4 4.8 461 1.3 3.69 ATS91 B5/B14 (1400 mn -1 ) 37.5 56 1.1 37.30 B5/B14 35.0 564 1.1 39.98 B5/B14 31.3 631 1.0 44.73 B5/B14 3.0 100LB4 39 115 1.7 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 155 1.6 7.87 B5/B14 148 186 1.6 9.47 B5/B14 11 7 1.5 11.53 B5/B14 106 61 1.3 13.6 B5/B14 89.3 308 1.1 15.68 B5/B14 84.0 38 1.1 16.68 B5/B14 73.3 375 1.1 19.09 B5/B14 63.7 431 0.9 1.96 B5/B14. 108.4 17 3.9 1.9 ATS91 B5/B14 98.0 140 3.6 14.9 B5/B14 86. 160 3.1 16.4 B5/B14 80.5 171.9 17.39 B5/B14 70.0 197 3.1 0.01 B5/B14 66.3 07.9 1.10 B5/B14 55.6 47.4 5.16 B5/B14 54. 54.4 5.81 B5/B14 48.5 78. 8.88 B5/B14 4.8 314 1.9 3.69 B5/B14 37.5 359 1.7 37.30 B5/B14 35.0 385 1.6 39.98 B5/B14 31.3 430 1.4 44.73 B5/B14 7.7 486 1. 50.53 B5/B14 4. 556 1.1 57.77 B5/B14 100LA4 39 85.4 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 113. 7.87 B5/B14 148 136. 9.47 B5/B14 11 166.1 11.53 B5/B14 106 191 1.8 13.6 B5/B14 89.3 6 1.5 15.68 B5/B14 84.0 40 1.5 16.68 B5/B14 73.3 75 1.5 19.09 B5/B14 63.7 316 1.3 1.96 B5/B14 5.8 38 1.0 6.50 B5/B14 50.7 398 1.0 7.61 B5/B14 47. 47 0.9 9.65 B5/B14 45.0 8 4.3 5.71 ATS91 B5/B14 18.7 110 3. 7.66 B5/B14 158. 18 3.1 8.85 B5/B14 151.8 133 3.0 9. B5/B14 14.7 16.5 11.3 B5/B14 117.9 171.3 11.87 B5/B14 108.4 186.7 1.9 B5/B14 98.0 06.4 14.9 B5/B14 86. 34.1 16.4 B5/B14 80.5 51.0 17.39 B5/B14 70.0 88.1 0.01 B5/B14 66.3 304.0 1.10 B5/B14 55.6 36 1.7 5.16 B5/B14 54. 37 1.6 5.81 B5/B14 48.5 407 1.5 8.88 B5/B14 4.0 45.0 11 3.1 5.71 ATS91 B5/B14 18.7 151.3 7.66 B5/B14 158. 174.3 8.85 B5/B14 151.8 181. 9. B5/B14 14.7 1 1.8 11.3 B5/B14 117.9 33 1.7 11.87 B5/B14 108.4 54.0 1.9 B5/B14 98.0 81 1.8 14.9 B5/B14 86. 319 1.6 16.4 B5/B14 80.5 34 1.5 17.39 B5/B14 70.0 393 1.5 0.01 B5/B14 66.3 415 1.4 1.10 B5/B14 55.6 494 1. 5.16 B5/B14 54. 507 1. 5.81 B5/B14 48.5 555 1.1 8.88 B5/B14 4.8 69 1.0 3.69 B5/B14 11M4 39 154 1.3 5.87 ATS90 B5/B14 (1400 mn -1 ) 178 06 1. 7.87 B5/B14 148 48 1. 9.47 B5/B14 11 30 1. 11.53 B5/B14 106 347 1.0 13.6 B5/B14 89.3 411 0.9 15.68 B5/B14 45.0 150.3 5.71 ATS91 B5/B14 18.7 01 1.7 7.66 B5/B14 158. 3 1.7 8.85 B5/B14 151.8 4 1.7 9. B5/B14 14.7 94 1.4 11.3 B5/B14 117.9 311 1.3 11.87 B5/B14 108.4 338 1.5 1.9 B5/B14 98.0 374 1.3 14.9 B5/B14 86. 45 1. 16.4 B5/B14 80.5 456 1.1 17.39 B5/B14 70.0 54 1.1 0.01 B5/B14 66.3 553 1.1 1.10 B5/B14 55.6 659 0.9 5.16 B5/B14 ATS F11

ATS Motorduttor pendolar Helcal parallel gearmotors Dmenson Dmensons ATS 90 ATS 90 U.. ATSIS 90 U.. 3 185 Ø 14 177.5 40 Ø19 h6 1.5 6 M6 19 h6 15 50 85 170 18 18 07.5 91.5 5.5 0 80 0 10 M10x16 n 4 8 Kg 11.0 M8x14 n 6-60 Ø105 h7 Ø15 90 90 84 ATS 90 F.. ATSIS 90 F.. 10 0.5 ØA ØE 5 5 ØB 4 1 4 1 ØC D ATS ATSIS 90 Flanga entrata Input flange ØA ØB ØC f7 Versone F / F Verson D ØE Tpo / Type Flanga / Flange Peso / Weght [kg] 00 165 130 165 11 F00 50 15 180 15 14 F50 3. ATS 90.. D35 - ATSIS 90.. D35 Albero uscta cavo Hollow output shaft 50 50 10 F6 38.3 1 1 10 Ø35 H8 F1

Motorduttor pendolar Helcal parallel gearmotors ATS Dmenson Dmensons ATS 903 ATS 903 U.. ATSIS 903 U.. 3 05.5 Ø14 197.5 40 Ø16 h6 18 5 M6 16 h6 15 85 170 50 18 18 07.5 91.5 5.5 0 80 0 10 M10x16 n 4 8 Kg 11.6 M8x14 n 6-60 Ø105 h7 Ø15 90 90 84 ATS ATS 903 F.. ATSIS 903 F.. 30.5.5 ØA ØE 5 5 ØB 4 1 4 1 ØC D ATS ATSIS 903 Flanga entrata Input flange ØA ØB ØC f7 Versone F / F Verson D ØE Tpo / Type Flanga / Flange Peso / Weght [kg] 00 165 130 165 11 F00 50 15 180 15 14 F50 3. ATS 903.. D35 - ATSIS 903.. D35 Albero uscta cavo Hollow output shaft 50 50 10 F6 38.3 1 1 10 Ø35 H8 F13

ATS Motorduttor pendolar Helcal parallel gearmotors Dmenson ATS 91 U.. ATSIS 91 U.. ATS 91 6 Dmensons 1.5 M6 19 h6 ATS 91 F.. Kg 14.9 ATSIS 91 F.. 6.5 19 ØA ØE 5 5 ØB 4 1 4 1 ØC D ATS ATSIS 91 Flanga entrata Input flange ØA ØB ATS 91.. D40 - ATSIS 91.. D40 Albero uscta cavo Hollow output shaft 50 ØC f7 Versone F / F Verson D ØE 50 1 Tpo / Type Flanga / Flange Peso / Weght [kg] 00 165 130 165 11 F00 50 15 180 15 14 F50 3. F7 43.3 1 1 140 Ø40 H8 F14

Dmenson ATS 913 U.. Motorduttor pendolar Helcal parallel gearmotors ATSIS 913 U.. ATS 913 ATS 5 Dmensons ATS 18 M6 16 h6 Kg 15.5 ATS 913 F.. ATSIS 913 F.. 47 39 ØA ØE 5 5 ØB 4 1 4 1 ØC D ATS ATSIS 913 Flanga entrata Input flange ØA ØB ATS 913.. D40 - ATSIS 913.. D40 Albero uscta cavo Hollow output shaft 50 ØC f7 Versone F / F Verson D ØE 50 1 Tpo / Type Flanga / Flange Peso / Weght [kg] 00 165 130 165 11 F00 50 15 180 15 14 F50 3. F7 43.3 1 1 140 Ø40 H8 F15

ATS Motorduttor pendolar Helcal parallel gearmotors Accessor Albero lento semplce Accessores Sngle output shaft ATS90... U.. SZ ATSIS90... U.. SZ ATS90... F.. SZ ATSIS90... F.. SZ 8 8 33 33 M10 30 h7 M10 30 h7 60 30.5 60 ATS91... U.. SZ ATSIS91... U.. SZ ATS91... F.. SZ ATSIS91... F.. SZ 10 10 38 38 M1 35 h7 M1 35 h7 70 30.5 70 Albero lento con calettarore Output shaft wth shrnk dsk ATS90... U.. G35 ATSIS90... U.. G35 ATS91... U.. G40 ATSIS91... U.. G40 Ø80 Ø90 Ø36 H8 Ø35 H8 Ø41 H8 Ø40 H8 9.5 35 35 148 31.5 40 40 171 148 171 Kt albero uscta con calettatore dsponble a rchesta: per le struzon d montaggo rferrs al nostro Servzo Tecnco. Output shaft kt wth shrnk dsk avalable on request: for assembly nstructons please contact our Techncal Servce F16

Motorduttor pendolar Helcal parallel gearmotors ATS Accessor Kt d montaggo albero uscta Accessores Output shaft assembly kt ATS90... ATS91... ATSIS90... ATSIS91... Kt d montaggo albero uscta dsponble a rchesta: per le struzon d montaggo rferrs al nostro Servzo Tecnco. Output shaft assembly kt avalable upon request: for assembly nstructons please contact our Techncal Assstance Kt d smontaggo albero uscta Output shaft dsassembly kt ATS ATS90... ATS91... ATSIS90... ATSIS91... Kt d smontaggo albero uscta dsponble a rchesta: per le struzon d montaggo rferrs al nostro Servzo Tecnco. Output shaft dsassembly kt avalable upon request: for assembly nstructons please contact our Techncal Assstance Kt bracco d reazone Torque arm kt ATS90...U ATS91...U ATSIS90...U ATSIS91...U Ø13 n + 5 15 Kt bracco d reazone dsponble a rchesta: per le struzon d montaggo rferrs al nostro Servzo Tecnco. Torque arm kt avalable upon request: for assembly nstructons please contact our Techncal Assstance F17

ATS Motorduttor pendolar Helcal parallel gearmotors Note/Notes F18

CM-CMP CM-CMP CM-CMP Motorduttor a vte senza fne Wormgearmotors

Motorduttor a vte senza fne Wormgearmotors CM/CMP Pag. Page Indce Index Caratterstche tecnche Techncal features G Desgnazone Clascaton G Sens d rotazone Drecton of rotaton G3 Smbologa Symbols G3 Lubrfcazone Lubrcaton G4 Carch radal Radal loads G5 Dat d dentatura Toothng data G6 Rendmento Effcency G6 Dat tecnc Techncal data G7 Motor applcabl IEC Motor adapters G4 Dmenson Dmensons G6 Accessor Accessores G39 Opzon Optons G40 CM/CMP Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0317A G1

CM/CMP Motorduttor a vte senza fne Wormgearmotors Caratterstche tecnche L elevata modulartà contraddstngue motorduttor a vte senza fne della sere CM e CMP: dvers kt entrata ed uscta l rendono estremamente versatl. Le caratterstche prncpal della sere CM e CMP sono: Carcassa n allumno nelle grandezze 06, 030, 040, 050, 063, 070, 075, 090 e 110. La grandezza 130 è costruta con carcassa n ghsa; Le grandezze 090, 110 e 130 sono fornte con cuscnett a rull conc sulla vte; Le precoppe sono costrute con carcassa n allumno; Techncal features The hgh degree of modularty s a desgn feature of CM and CMP wormgearmotors range thanks to a wde selecton of nput and output kts. Man features of CM and CMP range are: De-cast alumnum housng on szes 06, 030, 040, 050, 063, 070, 075, 090 and 110. Cast ron housng on sze 130; Double taper roller bearng on szes 090, 110 and 130; De-cast alumnum housng on pre-stage unts; Desgnazone Clascaton RIDUTTORI A VITE SENZA FINE / WORMGEARBOXES RIDUTTORE / GEARBOX CM 050 U 10 71 B5 SZDX BRSX 90 M1 VS Tpo Type CM CMIS Grandezza Sze 06 030 040 050 063 070 075 090 110 130 Versone rduttore Gearbox Verson U FD FS FLD FLS FBD FBS Rapporto Rato Vedere tabella See tables IEC 56.. 13.. Forma costruttva Verson B5 B14 Albero d uscta Output shaft SZDX SZSX DZ Bracco d reazone Torque arm BRDX BRSX Angolo Angle 0 90 180 70 Pos. d montaggo Mountng poston M1 (B3) M (V6) M3 (B8) M4 (V5) M6 (B6) M5 (B7) Opzon Optons VS RIDUTTORI A VITE SENZA FINE CON PRECOPPIA / PRE-STAGE WORMGEARBOXES RIDUTTORE / GEARBOX CMP 063/050 U 90 63 B14 SZDX BRSX 90 P4 M1 VS Tpo Type Grandezza Sze Versone Rduttore Gearbox Verson Rapporto Rato IEC Forma costruttva Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle Pos. d montaggo precoppa Pre stage mountng poston Pos. d montaggo Mountng poston Opzon Optons CMP 056/030 056/040 063/040 063/050 063/063 071/050 071/063 071/070 071/075 071/090 080/063 080/070 080/075 080/090 080/110 080/130 090/070 090/075 090/090 090/110 090/130 U FD FS FLD FLS FBD FBS Vedere tabella See tables 56.. 80.. B5 B14 SZDX SZSX DZ BRDX BRSX 0 90 180 70 P1 P P3 (standard) P4 M1 (B3) M (V6) M3 (B8) M4 (V5) M6 (B6) M5 (B7) P1 P P3 P4 (standard) VS G

Motorduttor a vte senza fne Wormgearmotors CM/CMP Desgnazone Clascaton Versone Rduttore Gearbox Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle 90 90 U FD FLD FBD FS FLS FBS SZDX SZSX DZ BRDX BRSX 180 70 70 0 MOTORE CM / CM MOTOR 0.75kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. Ved tabelle See tables p 4p 6p 8p 1ph 3ph 30/400V 0/380V... 30V... 50Hz 60Hz Sens d rotazone CM Drecton of rotaton CM/CMP CMP Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed Fattore d servzo / Servce factor n [mn -1 ] Veloctà n uscta / Output speed Rd % Rendmento dnamco / Dynamc effcency Rapporto d rduzone / Rato Rs % Rendmento statco / Statc effcency P 1 Potenza n entrata / Nomnal nput power M Coppa n uscta n funzone d P 1 / Output torque referred to P 1 R [N] Carco radale ammssble n uscta / Permtted output radal load A [N] Carco assale ammssble n uscta / Permtted output axal load Pn 1 Potenza nomnale n entrata / Nomnal nput power Mn Coppa nomnale n uscta n funzone d Pn 1 / Nomnal output torque referred to Pn 1 Z β Numero d prncp della vte / Worm starts Angolo d'elca / Helx angle G3

CM/CMP Motorduttor a vte senza fne Wormgearmotors Lubrfcazone Tutt motorduttor sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d monatggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton (vscosty grade 30) makes t possble to use the gearmotors n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. Quanttà d olo (ltr) / Ol quantty (ltres) CM M1 (B3) M3 (B8) M6 (B6) M5 (B7) M4 (V5) M (V6) 130 4.5 3.3 3.5 3.5 4.5 3.3 Quanttà d olo (ltr) / Ol quantty (ltres) CMP M1 (B3) M3 (B8) M6 (B6) M5 (B7) M4 (V5) M (V6) 080/130-090/130 4.5 3.3 3.5 3.5 4.5 3.3 M1 (B3) M (V6) M6 (B6) M4 (V5) M5 (B7) M3 (B8) CM_CMP 130 (1) (1) M1 (B3) M3 (B8) M6 (B6) M5 (B7) M4 (V5) M (V6) G4 (standard) (1): Tappo n poszone posterore / Plug n backsde poston Sfato e tappo d rempmento / Breather and fllng plug Lvello olo / Ol level plug Tappo d scarco / Ol dran plug

Motorduttor a vte senza fne Wormgearmotors CM/CMP Carch radal Radal loads =Rx 0. n [mn -1 ] R [N] CM06 CM030 CM040 CM050 CM063 CM070 CM075 CM090 CM110 CM130 187 400 674 164 1770 445 613 84 3161 5058 573 140 490 743 139 1949 69 878 3110 3481 5570 6313 93 580 851 1596 34 3085 398 3564 3990 6384 735 70 610 936 1754 456 339 366 3918 4386 7018 7953 56 610 1008 1890 646 3654 3906 41 475 7560 8567 47 610 1069 004 805 3874 4141 4475 5009 8014 9083 35 610 1179 10 3095 473 4568 4937 556 884 1001 8 610 170 381 3334 4603 491 5318 5953 954 10794 3 610 1356 54 3559 4915 554 5678 6356 10170 1156 18 610 1471 759 386 5334 570 616 6897 11036 1507 14 610 1600 3000 400 5800 600 6700 7500 1000 13600 CMP... /030 CMP... /040 CMP... /050 CMP... /063 CMP... /070 CMP... /075 CMP... /090 CMP... /110 CMP... /130 CM/CMP Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula: When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: Rc x R CM CM / CMP 06 030 040 050 063 070 075 090 110 130 a 56 65 84 101 10 1 131 18 176 188 b 43 50 64 76 95 9 101 1 136 148 R MAX 610 1600 3000 400 5800 600 6700 7500 1000 13600 L R c R a (b +x) R R c R MAX a, b = valor rportat nella tabella a, b = values gven n the table G5

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat d dentatura CM06 CM030 CM040 CM050 CM063 CM070 CM075 CM090 CM110 CM130 Rendmento Dat della coppa vtecorona Worm wheel data Rapporto / Rato Toothng data 5 7.5 10 15 0 5 30 40 50 60 80 100 Z 6 4 3 1 1 1 1 β 34 35' 4 41' 19 1' 1 57 ' 10 30' 6 33' 5 17' 4 6' 3 49 Z 6 4 3 1 1 1 1 1 1 β 7 4' 4 8' 18 50' 1 49' 10 3' 8 43' 6 9' 5 14' 4 3' 3 46' 57' 5' Z 6 4 3 1 1 1 1 1 1 β 34 19' 4 8' 18 50' 1 49' 10 3' 8 43' 6 9' 5 14' 4 3' 3 46' 57' 5' Z 6 4 3 1 1 1 1 1 1 β 33 37' 3 54' 18 3' 1 9' 10 6' 8 8' 6 19' 5 5' 4 15' 3 39' 51' 0' Z 6 4 3 1 1 1 1 1 1 β 34 3' 4 31' 18 53' 1 50' 10 4' 8 44' 6 30' 5 14' 4 3' 3 47' 57' 5' Z 4 3 1 1 1 1 1 1 β 6 1' 0 15' 13 49' 11 15' 9 9' 7 0' 5 41' 4 46' 4 7' 3 13' 39' Z 4 3 1 1 1 1 1 1 β 6 17' 0 0' 13 5' 11 18' 9 3' 7 ' 5 4' 4 48' 4 8' 3 14' 40' Z 4 3 1 1 1 1 1 1 β 9 11' 43' 15 36' 1 50' 10 53' 7 56' 6 30' 5 9' 4 45' 3 45' 3 6' Z 4 3 1 1 1 1 1 1 β 8 14' 1 56' 15 1' 14 41' 1 34' 7 38' 7 8' 6 1' 5 3' 4 4' 3 39' Z 4 3 1 1 1 1 1 1 β 8 43' 0' 15 19' 13 47' 11 54' 7 48' 7 00' 6 01' 5 16' 4 08' 3 7' Effcency CM06 CM030 CM040 CM050 CM063 CM070 CM075 CM090 CM110 CM130 G6 n 1 [mn -1 ] Rendmento Effcency Rapporto / Rato 5 7.5 10 15 0 5 30 40 50 60 80 100 800 89 87 85 83 80 73 68 64 60 1400 Rd 87 84 83 78 74 66 61 57 53 900 84 83 80 75 71 61 57 5 48 Rs 7 71 68 61 56 46 41 36 34 800 89 88 86 84 81 78 74 70 65 6 57 5 1400 Rd 86 85 84 79 75 7 67 6 58 55 48 43 900 84 83 81 75 71 68 6 58 53 49 43 39 Rs 7 67 63 55 50 43 39 35 31 7 3 1 800 90 89 87 84 83 80 77 73 69 66 60 56 1400 Rd 88 86 84 81 78 74 70 65 60 58 5 46 900 86 84 8 77 74 70 66 60 57 53 46 41 Rs 74 71 67 60 55 51 45 40 36 3 8 4 800 91 90 88 86 84 8 78 74 71 68 6 58 1400 Rd 89 87 85 8 79 76 7 67 63 60 54 49 900 87 85 84 79 75 7 68 6 59 55 48 43 Rs 73 70 66 59 55 51 44 39 35 3 7 3 800 91 90 88 86 84 83 79 76 73 70 65 60 1400 Rd 90 88 86 84 81 78 75 70 66 63 57 5 900 89 86 84 81 78 75 70 65 61 58 5 47 Rs 73 71 67 60 55 51 45 40 36 33 8 4 800 90 89 87 85 84 80 77 74 7 67 6 1400 Rd 89 87 84 8 80 76 7 68 65 60 53 900 87 85 8 79 77 7 67 63 60 54 49 Rs 7 69 6 60 55 48 43 38 36 31 6 800 90 89 87 85 84 81 78 75 7 68 63 1400 Rd 89 87 84 83 80 77 73 69 66 60 56 900 87 85 83 80 77 73 68 64 61 55 50 Rs 73 69 6 59 55 48 43 39 36 31 7 800 91 90 88 86 85 83 80 78 75 71 67 1400 Rd 90 88 86 84 83 79 76 7 69 64 60 900 88 87 84 8 80 76 7 68 65 60 55 Rs 74 71 65 61 59 51 46 4 39 34 30 800 90 89 88 87 86 8 81 79 77 73 70 1400 Rd 89 88 86 85 84 80 79 76 73 68 64 900 88 87 84 83 8 78 75 71 68 63 59 Rs 74 71 64 64 60 50 49 46 4 37 33 800 90 89 88 87 86 8 80 79 77 7 70 1400 Rd 89 88 86 84 83 79 76 75 73 69 64 900 88 87 84 8 81 77 74 73 70 64 59 Rs 74 71 64 64 60 50 49 46 4 37 33 Rendmento teorco del rduttore dopo l rodaggo Theoretcal effcency of the gearbox after the frst runnng perod

Motorduttor a vte senza fne Wormgearmotors Dat tecnc n 1 1400 mn -1 CM/CMP Techncal data n [mn -1 ] Mn Pn 1 n [mn -1 ] Mn Pn 1 CMIS06 CMIS030 CMIS040 CMIS050 CMIS063 80 13 0.44 5 187 14 0.33 7,5 140 14 0.5 10 93 14 0.18 15 70 14 0.14 0 47 15 0.11 30 35 14 0.08 40 8 13 0.07 50 3 1 0.06 60 80 18 0.61 5 187 0 0.46 7.5 140 1 0.37 10 93 1 0.6 15 70 19 0.19 0 56 0 0.16 5 47 0.16 30 35 0 0.1 40 8 19 0.10 50 3 17 0.08 60 18 15 0.06 80 14 14 0.05 100 80 41 1.37 5 187 44 1.00 7.5 140 45 0.79 10 93 45 0.54 15 70 40 0.38 0 56 38 0.30 5 47 48 0.34 30 35 4 0.4 40 8 39 0.19 50 3 36 0.15 60 18 33 0.1 80 14 31 0.10 100 80 75.5 5 187 79 1.8 7.5 140 8 1.4 10 93 8 0.98 15 70 7 0.67 0 56 70 0.54 5 47 88 0.60 30 35 76 0.4 40 8 7 0.34 50 3 69 0.8 60 18 60 0.0 80 14 56 0.17 100 80 134 4.4 5 187 144 3. 7.5 140 148.5 10 93 154 1.8 15 70 136 1.3 0 56 135 1.0 5 47 166 1.1 30 35 14 0.74 40 8 136 0.60 50 3 16 0.49 60 18 118 0.38 80 Nota: 14 116 0.33 100 Pn 1 è la potenza meccanca. La potenza applcable è rdotta del fattore termco. Per maggor dettagl consultare l nostro Servzo Tecnco. CMIS070 CMIS075 CMIS090 CMIS110 CMIS130 187 00 4.4 7.5 140 18 3.7 10 93 1.6 15 70 0 1.8 0 56 180 1.3 5 47 41 1.6 30 35 10 1.1 40 8 190 0.8 50 3 181 0.68 60 18 159 0.49 80 14 154 0.43 100 187 38 5. 7.5 140 57 4.3 10 93 66 3.1 15 70 4.1 0 56 5 1.7 5 47 89 1.8 30 35 51 1.3 40 8 7 0.96 50 3 18 0.8 60 18 193 0.59 80 14 183 0.49 100 187 34 7.4 7.5 140 380 6. 10 93 433 4.9 15 70 414 3.6 0 56 369.6 5 47 493 3.0 30 35 434.1 40 8 385 1.55 50 3 35 1.3 60 18 34 0.9 80 14 99 0.7 100 187 605 13 7.5 140 669 11.0 10 93 730 8. 15 70 740 6.0 0 56 670 4.7 5 47 815 4.9 30 35 768 3.6 40 8 699 1.7 50 3 66 1.1 60 18 56 1.51 80 14 53 1.19 100 187 750 16.5 7.5 140 80 13.7 10 93 910 10.3 15 70 910 7.9 0 56 90 6.5 5 47 1050 6.5 30 35 1050 5.1 40 8 970 3.8 50 3 890 3.0 60 18 830. 80 14 735 1.7 100 Note: Pn 1 s an nput mechancal power whch must be reduced by the heatng factor n order to get the relevant one. For more detals please contact our Techncal Servce. G7 CM/CMP

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.06 56A4 80 7.3 5 CM06 B14 (1400 mn -1 ) 187 3 5.4 7.5 CM06 B14 140 3 4.1 10 CM06 B14 93 5.9 15 CM06 B14 70 6.3 0 CM06 B14 47 8 1.9 30 CM06 B14 35 10 1.4 40 CM06 B14 8 1 1.1 50 CM06 B14 3 13 0.9 60 CM06 B14 80 10. 5 CM030 B5/B14 187 3 7.7 7.5 CM030 B5/B14 140 3 6.1 10 CM030 B5/B14 93 5 4.3 15 CM030 B5/B14 70 6 3.1 0 CM030 B5/B14 56 7.7 5 CM030 B5/B14 47 8.7 30 CM030 B5/B14 35 10.0 40 CM030 B5/B14 8 1 1.6 50 CM030 B5/B14 3 14 1.3 60 CM030 B5/B14 3 16 1.6 60 CMP056/030 B14 19 19 1.4 75 CMP056/030 B14 18 16 1.0 80 CM030 B5/B14 16 1 1.5 90 CMP056/030 B14 14 18 0.8 100 CM030 B5/B14 1 6 1.1 10 CMP056/030 B14 9.3 9 0.9 150 CMP056/030 B14 8 1 3. 50 CM040 B5/B14 3 14.5 60 CM040 B5/B14 3 17 3.4 60 CMP056/040 B14 19 0.6 75 CMP056/040 B14 18 17 1.9 80 CM040 B5/B14 16 3 3.1 90 CMP056/040 B14 14 19 1.6 100 CM040 B5/B14 1 8. 10 CMP056/040 B14 9.3 3 1.8 150 CMP056/040 B14 7.8 35 1.5 180 CMP056/040 B14 5.8 41 1.1 40 CMP056/040 B14 4.7 46 0.9 300 CMP056/040 B14 0.09 56A 560 1 7.3 5 CM06 B14 (800 mn -1 ) 373 5.5 7.5 CM06 B14 80 3 4. 10 CM06 B14 187 4.9 15 CM06 B14 140 5. 0 CM06 B14 93 7 1.8 30 CM06 B14 70 8 1.3 40 CM06 B14 56 10 1.0 50 CM06 B14 47 11 0.8 60 CM06 B14 0.09 56A 31 17 1.6 90 CMP056/030 B14 (800 mn -1 ) 8 16 0.7 100 CM030 B5/B14 3 1 1.1 10 CMP056/030 B14 19 4 0.9 150 CMP056/030 B14 47 1.4 60 CM040 B5/B14 47 13 3.4 60 CMP056/040 B14 37 16.8 75 CMP056/040 B14 31 18 3.1 90 CMP056/040 B14 3. 10 CMP056/040 B14 19 6 1.8 150 CMP056/040 B14 16 9 1.5 180 CMP056/040 B14 1 33 1. 40 CMP056/040 B14 9.3 37 1.0 300 CMP056/040 B14 56B4 80 3 4.9 5 CM06 B14 (1400 mn -1 ) 187 4 3.6 7.5 CM06 B14 140 5.7 10 CM06 B14 93 7 1.9 15 CM06 B14 70 9 1.5 0 CM06 B14 47 1 1. 30 CM06 B14 35 15 0.9 40 CM06 B14 8 17 0.7 50 CM06 B14 80 3 6.8 5 CM030 B5/B14 187 4 5.1 7.5 CM030 B5/B14 140 5 4.1 10 CM030 B5/B14 93 7.9 15 CM030 B5/B14 70 9.1 0 CM030 B5/B14 56 11 1.8 5 CM030 B5/B14 47 1 1.8 30 CM030 B5/B14 35 15 1.3 40 CM030 B5/B14 8 18 1.1 50 CM030 B5/B14 3 0 0.8 60 CM030 B5/B14 3 4 1.1 60 CMP056/030 B14 19 9 0.9 75 CMP056/030 B14 18 4 0.6 80 CM030 B5/B14 16 3 1.0 90 CMP056/030 B14 1 38 0.8 10 CMP056/030 B14 35 16.6 40 CM040 B5/B14 8 18.1 50 CM040 B5/B14 3 1 1.7 60 CM040 B5/B14 3 5.3 60 CMP056/040 B14 19 30 1.7 75 CMP056/040 B14 18 6 1.3 80 CM040 B5/B14 16 34.1 90 CMP056/040 B14 14 8 1.1 100 CM040 B5/B14 1 4 1.5 10 CMP056/040 B14 9.3 48 1. 150 CMP056/040 B14 7.8 53 1.0 180 CMP056/040 B14 5.8 6 0.8 40 CMP056/040 B14 G8 140 5.8 0 CM030 B5/B14 11 6.5 5 CM030 B5/B14 93 7.6 30 CM030 B5/B14 70 9 1.9 40 CM030 B5/B14 56 10 1.5 50 CM030 B5/B14 47 11 1. 60 CM030 B5/B14 47 13 1.7 60 CMP056/030 B14 37 15 1.4 75 CMP056/030 B14 35 14 0.9 80 CM030 B5/B14 63A6 180 4 5. 5 CM030 B5/B14 (900 mn -1 ) 10 6 4.0 7.5 CM030 B5/B14 90 8 3.1 10 CM030 B5/B14 60 11.3 15 CM030 B5/B14 45 14 1.6 0 CM030 B5/B14 36 16 1.4 5 CM030 B5/B14 30 18 1.5 30 CM030 B5/B14 3 1.0 40 CM030 B5/B14 18 5 0.9 50 CM030 B5/B14

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.09 63A6 45 14 3. 0 CM040 B5/B14 (900 mn -1 ) 36 17.6 5 CM040 B5/B14 30 19 3.0 30 CM040 B5/B14 3 3.1 40 CM040 B5/B14 18 7 1.7 50 CM040 B5/B14 15 30 1.4 60 CM040 B5/B14 15 38 1.8 60 CMP063/040 B14 1 45 1.4 75 CMP063/040 B14 11 35 1.1 80 CM040 B5/B14 10 48 1.7 90 CMP063/040 B14 9 39 0.9 100 CM040 B5/B14 7.5 58 1. 10 CMP063/040 B14 0.1 15 3.4 60 CM050 B5/B14 15 38 3.3 60 CMP063/050 B14 1 45.6 75 CMP063/050 B14 11 37 1.9 80 CM050 B5/B14 10 49 3.1 90 CMP063/050 B14 9 41 1.6 100 CM050 B5/B14 7.5 60.1 10 CMP063/050 B14 6.0 67 1.8 150 CMP063/050 B14 5.0 74 1.4 180 CMP063/050 B14 3.8 85 1.1 40 CMP063/050 B14 6.0 7 3.0 150 CMP063/063 B14 5.0 79.5 180 CMP063/063 B14 3.8 90 1.9 40 CMP063/063 B14 3.0 101 1.5 300 CMP063/063 B14 56B 560 5.5 5 CM06 B14 (800 mn -1 ) 373 3 4.1 7.5 CM06 B14 80 3 3. 10 CM06 B14 187 5. 15 CM06 B14 140 7 1.7 0 CM06 B14 93 9 1.3 30 CM06 B14 70 11 1.0 40 CM06 B14 56 13 0.8 50 CM06 B14 560 7.1 5 CM030 B5/B14 373 3 5.6 7.5 CM030 B5/B14 80 4 4.5 10 CM030 B5/B14 187 5 3.1 15 CM030 B5/B14 140 7.1 0 CM030 B5/B14 11 8 1.9 5 CM030 B5/B14 93 9.0 30 CM030 B5/B14 70 11 1.4 40 CM030 B5/B14 56 13 1.1 50 CM030 B5/B14 47 15 0.9 60 CM030 B5/B14 47 17 1.3 60 CMP056/030 B14 37 0 1.1 75 CMP056/030 B14 31 1. 90 CMP056/030 B14 3 8 0.8 10 CMP056/030 B14 93 9 4.0 30 CM040 B5/B14 70 1.8 40 CM040 B5/B14 56 14.3 50 CM040 B5/B14 47 16 1.8 60 CM040 B5/B14 47 18.5 60 CMP056/040 B5/B14 37 1.1 75 CMP056/040 B14 0.1 56B 35 0 1.4 80 CM040 B5/B14 (800 mn -1 ) 31 4.4 90 CMP056/040 B14 8 3 1.0 100 CM040 B5/B14 3 9 1.7 10 CMP056/040 B14 19 34 1.3 150 CMP056/040 B14 16 38 1.1 180 CMP056/040 B14 1 44 0.9 40 CMP056/040 B14 63A4 80 4 5.1 5 CM030 B5/B14 (1400 mn -1 ) 187 5 3.8 7.5 CM030 B5/B14 140 7 3.1 10 CM030 B5/B14 93 10. 15 CM030 B5/B14 70 1 1.5 0 CM030 B5/B14 56 15 1.4 5 CM030 B5/B14 47 16 1.3 30 CM030 B5/B14 35 0 1.0 40 CM030 B5/B14 8 4 0.8 50 CM030 B5/B14 80 4 11.4 5 CM040 B5/B14 187 5 8.3 7.5 CM040 B5/B14 140 7 6.5 10 CM040 B5/B14 93 10 4.5 15 CM040 B5/B14 70 13 3.1 0 CM040 B5/B14 56 15.5 5 CM040 B5/B14 47 17.8 30 CM040 B5/B14 35 1.0 40 CM040 B5/B14 8 5 1.6 50 CM040 B5/B14 3 8 1.3 60 CM040 B5/B14 3 34 1.7 60 CMP063/040 B14 19 40 1.3 75 CMP063/040 B14 18 34 1.0 80 CM040 B5/B14 16 45 1.6 90 CMP063/040 B14 14 38 0.8 100 CM040 B5/B14 1 56 1.1 10 CMP063/040 B14 35 3.5 40 CM050 B5/B14 8 6.8 50 CM050 B5/B14 3 9.3 60 CM050 B5/B14 3 34 3.0 60 CMP063/050 B14 19 40.3 75 CMP063/050 B14 18 35 1.7 80 CM050 B5/B14 16 47.7 90 CMP063/050 B14 14 40 1.4 100 CM050 B5/B14 1 57 1.9 10 CMP063/050 B14 9.3 66 1.6 150 CMP063/050 B14 7.8 74 1.3 180 CMP063/050 B14 5.8 85 1.0 40 CMP063/050 B14 14.0 43.7 100 CM063 B5 9.3 69.8 150 CMP063/063 B14 7.8 77.3 180 CMP063/063 B14 5.8 90 1.7 40 CMP063/063 B14 4.7 101 1.4 300 CMP063/063 B14 63B6 180 5 3.9 5 CM030 B5/B14 (900 mn -1 ) 10 8 3.0 7.5 CM030 B5/B14 90 10.3 10 CM030 B5/B14 60 14 1.7 15 CM030 B5/B14 45 18 1. 0 CM030 B5/B14 36 1.0 5 CM030 B5/B14 30 4 1.1 30 CM030 B5/B14 3 30 0.8 40 CM030 B5/B14 CM/CMP G9

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.1 63B6 60 15 3.7 15 CM040 B5/B14 (900 mn -1 ) 45 19.4 0 CM040 B5/B14 36.0 5 CM040 B5/B14 30 5. 30 CM040 B5/B14 3 31 1.6 40 CM040 B5/B14 18 36 1.3 50 CM040 B5/B14 15 40 1.1 60 CM040 B5/B14 15 50 1.3 60 CMP063/040 B14 1 60 1.1 75 CMP063/040 B14 11 47 0.9 80 CM040 B5/B14 10 64 1.3 90 CMP063/040 B14 7.5 78 0.9 10 CMP063/040 B14 30 6 3.8 30 CM050 B5/B14 3 3.7 40 CM050 B5/B14 18 38. 50 CM050 B5/B14 15 4 1.8 60 CM050 B5/B14 15 50.5 60 CMP063/050 B14 1 59 1.9 75 CMP063/050 B14 11 49 1.4 80 CM050 B5/B14 10 65.3 90 CMP063/050 B14 9 55 1. 100 CM050 B5/B14 7.5 79 1.6 10 CMP063/050 B14 6.0 90 1.3 150 CMP063/050 B14 5.0 99 1.1 180 CMP063/050 B14 3.8 114 0.8 40 CMP063/050 B14 11,3 53.4 80 CM063 B5 9,0 60.0 100 CM063 B5 7.5 8.9 10 CMP063/063 B14 6.0 95.3 150 CMP063/063 B14 5.0 106 1.9 180 CMP063/063 B14 3.8 10 1.4 40 CMP063/063 B14 3.0 135 1. 300 CMP063/063 B14 0.18 63A 560 3 4.8 5 CM030 B5/B14 (800 mn -1 ) 373 4 3.7 7.5 CM030 B5/B14 80 5 3.0 10 CM030 B5/B14 187 8.1 15 CM030 B5/B14 140 10 1.4 0 CM030 B5/B14 11 1 1.3 5 CM030 B5/B14 93 14 1.3 30 CM030 B5/B14 70 17 0.9 40 CM030 B5/B14 56 0 0.8 50 CM030 B5/B14 140 10 3.0 0 CM040 B5/B14 11 1.3 5 CM040 B5/B14 93 14.7 30 CM040 B5/B14 70 18 1.9 40 CM040 B5/B14 56 1 1.5 50 CM040 B5/B14 47 4 1. 60 CM040 B5/B14 47 7 1.7 60 CMP063/040 B14 37 3 1.4 75 CMP063/040 B14 35 9 0.9 80 CM040 B5/B14 31 36 1.6 90 CMP063/040 B14 3 43 1.1 10 CMP063/040 B14 56.6 50 CM050 B5/B14 47 5.1 60 CM050 B5/B14 47 7 3.0 60 CMP063/050 B14 37 3.3 75 CMP063/050 B14 0.18 63A 35 30 1.5 80 CM050 B5/B14 (800 mn -1 ) 31 37.7 90 CMP063/050 B14 8 36 1. 100 CM050 B5/B14 3 45 1.9 10 CMP063/050 B14 19 53 1.5 150 CMP063/050 B14 16 60 1.3 180 CMP063/050 B14 1 69 1.0 40 CMP063/050 B14 35 3.7 80 CM063 B5 8 37. 100 CM063 B5 19 55.7 150 CMP063/063 B14 16 63.3 180 CMP063/063 B14 1 75 1.7 40 CMP063/063 B14 9.3 85 1.4 300 CMP063/063 B14 63B4 80 5 3.4 5 CM030 B5/B14 (1400 mn -1 ) 187 8.6 7.5 CM030 B5/B14 140 10.0 10 CM030 B5/B14 93 15 1.4 15 CM030 B5/B14 70 18 1.0 0 CM030 B5/B14 56 0.9 5 CM030 B5/B14 47 5 0.9 30 CM030 B5/B14 80 5 7.6 5 CM040 B5/B14 187 8 5.6 7.5 CM040 B5/B14 140 10 4.4 10 CM040 B5/B14 93 15 3.0 15 CM040 B5/B14 70 19.1 0 CM040 B5/B14 56 3 1.7 5 CM040 B5/B14 47 6 1.9 30 CM040 B5/B14 35 3 1.3 40 CM040 B5/B14 8 37 1.1 50 CM040 B5/B14 3 43 0.8 60 CM040 B5/B14 3 51 1.1 60 CMP063/040 B14 19 60 0.9 75 CMP063/040 B14 16 68 1.0 90 CMP063/040 B14 35 33.3 40 CM050 B5/B14 8 39 1.9 50 CM050 B5/B14 3 44 1.6 60 CM050 B5/B14 3 51.0 60 CMP063/050 B14 19 60 1.5 75 CMP063/050 B14 18 53 1.1 80 CM050 B5/B14 16 70 1.8 90 CMP063/050 B14 14 60 0.9 100 CM050 B5/B14 1 85 1.3 10 CMP063/050 B14 9.3 99 1.0 150 CMP063/050 B14 7.8 110 0.9 180 CMP063/050 B14 3 46.7 60 CM063 B5 3 53 3.6 60 CMP063/063 B14 19 63.7 75 CMP063/063 B14 18 56.1 80 CM063 B5 16 69 3.4 90 CMP063/063 B14 14 64 1.8 100 CM063 B5 1 87.4 10 CMP063/063 B14 9.3 103 1.9 150 CMP063/063 B14 7.8 115 1.6 180 CMP063/063 B14 5.8 136 1.1 40 CMP063/063 B14 4.7 15 0.9 300 CMP063/063 B14 G10

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.18 71A6 180 8 5.7 5 CM040 B5/B14 (900 mn -1 ) 10 1 4. 7.5 CM040 B5/B14 90 16 3.3 10 CM040 B5/B14 60.4 15 CM040 B5/B14 45 8 1.6 0 CM040 B5/B14 36 33 1.3 5 CM040 B5/B14 30 38 1.5 30 CM040 B5/B14 3 46 1.0 40 CM040 B5/B14 36 34. 5 CM050 B5/B14 30 39.5 30 CM050 B5/B14 3 47 1.8 40 CM050 B5/B14 18 56 1.4 50 CM050 B5/B14 15 63 1. 60 CM050 B5/B14 15 75 1.7 60 CMP071/050 B14 1 88 1.3 75 CMP071/050 B14 11 73 0.9 80 CM050 B5/B14 10 98 1.5 90 CMP071/050 B14 18 58.6 50 CM063 B5/B14 15 66.1 60 CM063 B5/B14 15 77 3.0 60 CMP071/063 B14 1 91.3 75 CMP071/063 B14 11 79 1.6 80 CM063 B5/B14 10 101.8 90 CMP071/063 B14 9 90 1.4 100 CM063 B5/B14 7.5 14.0 10 CMP071/063 B14 6.0 143 1.5 150 CMP071/063 B14 5.0 158 1.3 180 CMP071/063 B14 11 83.3 80 CM070 B5 9 94 1.8 100 CM070 B5 7.5 18.8 10 CMP071/070 B14 6.0 149.1 150 CMP071/070 B14 5.0 165 1.8 180 CMP071/070 B14 3.8 193 1.3 40 CMP071/070 B14 3.0 13 1.1 300 CMP071/070 B14 0. 63C4 80 7 6. 5 CM040 B5/B14 (1400 mn -1 ) 187 10 4.5 7.5 CM040 B5/B14 140 13 3.6 10 CM040 B5/B14 93 18.5 15 CM040 B5/B14 70 3 1.7 0 CM040 B5/B14 56 8 1.4 5 CM040 B5/B14 47 3 1.5 30 CM040 B5/B14 35 39 1.1 40 CM040 B5/B14 8 45 0.9 50 CM040 B5/B14 3 6 0.9 60 CMP063/040 B14 19 73 0.7 75 CMP063/040 B14 16 83 0.9 90 CMP063/040 B14 56 9,5 5 CM050 B5/B14 47 3,7 30 CM050 B5/B14 35 40 1.9 40 CM050 B5/B14 8 47 1.5 50 CM050 B5/B14 3 54 1.3 60 CM050 B5/B14 3 63 1.6 60 CMP063/050 B14 19 74 1. 75 CMP063/050 B14 18 65 0.9 80 CM050 B5/B14 16 86 1.5 90 CMP063/050 B14 14 74 0.8 100 CM050 B5/B14 1 104 1.1 10 CMP063/050 B14 9.3 11 0.9 150 CMP063/050 B14 3 57. 60 CM063 B5 3 64.9 60 CMP063/063 B14 19 77. 75 CMP063/063 B14 18 68 1.7 80 CM063 B5 16 85.8 90 CMP063/063 B14 14 78 1.5 100 CM063 B5 1 106 1.9 10 CMP063/063 B14 9.3 16 1.5 150 CMP063/063 B14 7.8 140 1.3 180 CMP063/063 B14 5.8 166 0.9 40 CMP063/063 B14 4.7 185 0.8 300 CMP063/063 B14 CM/CMP 0. 11 84.7 80 CM075 B5 9 96.1 100 CM075 B5 7.5 130 3.3 10 CMP071/075 B14 6.0 15.5 150 CMP071/075 B14 5.0 168.1 180 CMP071/075 B14 3.8 193 1.6 40 CMP071/075 B14 3.0 13 1.3 300 CMP071/075 B14 5.0 18 3. 180 CMP071/090 B14 3.8 11.4 40 CMP071/090 B14 3.0 41 1.9 300 CMP071/090 B14 63C4 80 6.8 5 CM030 B5/B14 (1400 mn -1 ) 187 10.1 7.5 CM030 B5/B14 140 13 1.7 10 CM030 B5/B14 93 18 1. 15 CM030 B5/B14 70 3 0.8 0 CM030 B5/B14 0.5 63B 560 4 3.4 5 CM030 B5/B14 (800 mn -1 ) 373 6.7 7.5 CM030 B5/B14 80 7. 10 CM030 B5/B14 187 11 1.5 15 CM030 B5/B14 140 14 1.0 0 CM030 B5/B14 11 17 0.9 5 CM030 B5/B14 93 19 1.0 30 CM030 B5/B14 140 14. 0 CM040 B5/B14 11 17 1.6 5 CM040 B5/B14 93 0 1.9 30 CM040 B5/B14 70 5 1.4 40 CM040 B5/B14 56 9 1.1 50 CM040 B5/B14 47 34 0.9 60 CM040 B5/B14 47 37 1. 60 CMP063/040 B14 37 44 1.0 75 CMP063/040 B14 31 50 1.1 90 CMP063/040 B14 3 60 0.8 10 CMP063/040 B14 G11

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 63B 70 5.3 40 CM050 B5/B14 (800 mn -1 ) 56 30 1.9 50 CM050 B5/B14 47 35 1.5 60 CM050 B5/B14 47 38.1 60 CMP063/050 B14 37 45 1.7 75 CMP063/050 B14 35 4 1.1 80 CM050 B5/B14 31 51 1.9 90 CMP063/050 B14 8 49 0.9 100 CM050 B5/B14 3 6 1.4 10 CMP063/050 B14 19 74 1.1 150 CMP063/050 B14 16 83 0.9 180 CMP063/050 B14 35 44.0 80 CM063 B5 31 53 3.5 90 CMP063/063 B14 8 51 1.6 100 CM063 B5 3 65.5 10 CMP063/063 B14 19 76.0 150 CMP063/063 B14 16 87 1.6 180 CMP063/063 B14 1 104 1. 40 CMP063/063 B14 9.3 118 1.0 300 CMP063/063 B14 71A4 80 8 5.5 5 CM040 B5/B14 (1400 mn -1 ) 187 11 4.0 7.5 CM040 B5/B14 140 14 3.1 10 CM040 B5/B14 93 1. 15 CM040 B5/B14 70 7 1.5 0 CM040 B5/B14 56 3 1. 5 CM040 B5/B14 47 36 1.3 30 CM040 B5/B14 35 44 0.9 40 CM040 B5/B14 70 7.7 0 CM050 B5/B14 56 3. 5 CM050 B5/B14 47 37.4 30 CM050 B5/B14 35 46 1.7 40 CM050 B5/B14 8 54 1.3 50 CM050 B5/B14 3 61 1.1 60 CM050 B5/B14 3 71 1.4 60 CMP071/050 B14 19 84 1.1 75 CMP071/050 B14 18 74 0.8 80 CM050 B5/B14 16 98 1.3 90 CMP071/050 B14 8 56.4 50 CM063 B5/B14 3 64.0 60 CM063 B5/B14 3 73.6 60 CMP071/063 B14 19 88.0 75 CMP071/063 B14 18 78 1.5 80 CM063 B5/B14 16 96.4 90 CMP071/063 B14 14 89 1.3 100 CM063 B5/B14 1 10 1.7 10 CMP071/063 B14 9.3 143 1.3 150 CMP071/063 B14 7.8 159 1.1 180 CMP071/063 B14 18 8 1.9 80 CM070 B5 16 99 3.1 90 CMP071/070 B14 14 90 1.7 100 CM070 B5 1 1. 10 CMP071/070 B14 9.3 143 1.8 150 CMP071/070 B14 7.8 159 1.4 180 CMP071/070 B14 5.8 189 1.1 40 CMP071/070 B14 4.7 11 1.9 300 CMP071/070 B14 0.5 71A4 18 8.4 80 CM075 B5 (1400 mn -1 ) 16 101 4.0 90 CMP071/075 B14 14 96 1.9 100 CM075 B5 1 14.9 10 CMP071/075 B14 9.3 145.3 150 CMP071/075 B14 7.8 16 1.9 180 CMP071/075 B14 5.8 193 1.4 40 CMP071/075 B14 4.7 16 1.1 300 CMP071/075 B14 7.8 177.8 180 CMP071/090 B14 5.8 09. 40 CMP071/090 B14 4.7 36 1.7 300 CMP071/090 B14 71B6 180 11 4.1 5 CM040 B5/B14 (900 mn -1 ) 10 17 3.1 7.5 CM040 B5/B14 90.4 10 CM040 B5/B14 60 31 1.8 15 CM040 B5/B14 45 39 1.1 0 CM040 B5/B14 36 46 0.9 5 CM040 B5/B14 30 53 1.1 30 CM040 B5/B14 3 64 0.8 40 CM040 B5/B14 45 40.0 0 CM050 B5/B14 36 48 1.6 5 CM050 B5/B14 30 54 1.8 30 CM050 B5/B14 3 66 1.3 40 CM050 B5/B14 18 78 1.0 50 CM050 B5/B14 15 88 0.9 60 CM050 B5/B14 15 105 1. 60 CMP071/050 B14 1 13 0.9 75 CMP071/050 B14 10 136 1.1 90 CMP071/050 B14 3 69.3 40 CM063 B5/B14 18 81 1.9 50 CM063 B5/B14 15 9 1.5 60 CM063 B5/B14 15 108.1 60 CMP071/063 B14 1 17 1.7 75 CMP071/063 B14 11 110 1. 80 CM063 B5/B14 10 140.0 90 CMP071/063 B14 9 15 1.0 100 CM063 B5/B14 7.5 17 1.4 10 CMP071/063 B14 6.0 199 1.1 150 CMP071/063 B14 5.0 0 0.9 180 CMP071/063 B14 18 84.6 50 CM070 B5 15 96. 60 CM070 B5 11 115 1.6 80 CM070 B5 10 145.9 90 CMP071/070 B14 9 130 1.3 100 CM070 B5 7.5 178.0 10 CMP071/070 B14 6.0 07 1.5 150 CMP071/070 B14 5.0 9 1.3 180 CMP071/070 B14 3.8 68 0.9 40 CMP071/070 B14 3.0 96 0.8 300 CMP071/070 B14 G1

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 71B6 15 96.6 60 CM075 B5 (900 mn -1 ) 11 117 1.9 80 CM075 B5 10 147 3.1 90 CMP071/075 B14 9 133 1.5 100 CM075 B5 7.5 181.4 10 CMP071/075 B14 6.0 11 1.8 150 CMP071/075 B14 5.0 34 1.5 180 CMP071/075 B14 3.8 68 1.1 40 CMP071/075 B14 3.0 96 0.9 300 CMP071/075 B14 0.37 6.0.9 150 CMP071/090 B14 5.0 53.3 180 CMP071/090 B14 3.8 93 1.7 40 CMP071/090 B14 3.0 335 1.4 300 CMP071/090 B14 71A 560 6 5.1 5 CM040 B5/B14 (800 mn -1 ) 373 8 3.7 7.5 CM040 B5/B14 80 11 3.0 10 CM040 B5/B14 187 16. 15 CM040 B5/B14 140 1 1.5 0 CM040 B5/B14 11 5 1.1 5 CM040 B5/B14 93 9 1.3 30 CM040 B5/B14 70 37 0.9 40 CM040 B5/B14 11 6.0 5 CM050 B5/B14 93 30.3 30 CM050 B5/B14 70 37 1.6 40 CM050 B5/B14 56 45 1.3 50 CM050 B5/B14 47 51 1.0 60 CM050 B5/B14 47 56 1.4 60 CMP071/050 B14 37 67 1.1 75 CMP071/050 B14 31 76 1.3 90 CMP071/050 B14 0.37 71A 16 14.9 180 CMP071/090 B14 (800 mn -1 ) 1 175. 40 CMP071/090 B14 9.3 00 1.7 300 CMP071/090 B14 71B4 80 11 3.7 5 CM040 B5/B14 (1400 mn -1 ) 187 16.7 7.5 CM040 B5/B14 140 1.1 10 CM040 B5/B14 93 31 1.5 15 CM040 B5/B14 70 39 1.0 0 CM040 B5/B14 56 47 0.8 5 CM040 B5/B14 47 53 0.9 30 CM040 B5/B14 93 31.6 15 CM050 B5/B14 70 40 1.8 0 CM050 B5/B14 56 48 1.5 5 CM050 B5/B14 47 55 1.6 30 CM050 B5/B14 35 68 1.1 40 CM050 B5/B14 8 80 0.9 50 CM050 B5/B14 3 91 0.8 60 CM050 B5/B14 3 105 1.0 60 CMP071/050 B14 19 14 0.7 75 CMP071/050 B14 16 145 0.9 90 CMP071/050 B14 35 71.0 40 CM063 B5/B14 8 83 1.6 50 CM063 B5/B14 3 95 1.3 60 CM063 B5/B14 3 108 1.7 60 CMP071/063 B14 19 130 1.3 75 CMP071/063 B14 18 115 1.0 80 CM063 B5/B14 16 14 1.6 90 CMP071/063 B14 14 131 0.9 100 CM063 B5/B14 1 178 1. 10 CMP071/063 B14 9.3 11 0.9 150 CMP071/063 B14 7.8 36 0.8 180 CMP071/063 B14 CM/CMP 56 46. 50 CM063 B5/B14 47 53 1.8 60 CM063 B5/B14 47 58.7 60 CMP071/063 B14 37 70.0 75 CMP071/063 B14 35 66 1.3 80 CM063 B5/B14 31 78.4 90 CMP071/063 B14 8 76 1.1 100 CM063 B5/B14 3 96 1.7 10 CMP071/063 B14 19 113 1.3 150 CMP071/063 B14 16 19 1.1 180 CMP071/063 B14 35 68 1.9 80 CM070 B5 8 78 1.5 100 CM070 B5 3 99.4 10 CMP071/070 B14 19 117 1.8 150 CMP071/070 B14 16 134 1.6 180 CMP071/070 B14 1 160 1. 40 CMP071/070 B14 9.3 18 0.9 300 CMP071/070 B14 35 68. 80 CM075 B5 8 80 1.7 100 CM075 B5 3 101.8 10 CMP071/075 B14 19 119. 150 CMP071/075 B14 16 134 1.9 180 CMP071/075 B14 1 163 1.4 40 CMP071/075 B14 9.3 186 1.1 300 CMP071/075 B14 8 86. 50 CM070 B5 3 98 1.8 60 CM070 B5 3 110.6 60 CMP071/070 B14 19 13 1.9 75 CMP071/070 B14 18 11 1.3 80 CM070 B5 16 147.3 90 CMP071/070 B14 14 134 1. 100 CM070 B5 1 181 1.7 10 CMP071/070 B14 9.3 11 1.3 150 CMP071/070 B14 7.8 36 1.1 180 CMP071/070 B14 5.8 79 0.8 40 CMP071/070 B14 8 87.6 50 CM075 B5 3 100. 60 CM075 B5 3 111 3.0 60 CMP071/075 B14 19 134. 75 CMP071/075 B14 18 11 1.6 80 CM075 B5 16 149.7 90 CMP071/075 B14 14 141 1.3 100 CM075 B5 1 184.0 10 CMP071/075 B14 9.3 15 1.5 150 CMP071/075 B14 7.8 40 1.3 180 CMP071/075 B14 5.8 85 0.9 40 CMP071/075 B14 4.7 319 0.8 300 CMP071/075 B14 G13

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.37 71B4 18 19.5 80 CM090 B5 (1400 mn -1 ) 14 151.0 100 CM090 B5 1 193 3. 10 CMP071/090 B14 9.3 6.4 150 CMP071/090 B14 7.8 63 1.9 180 CMP071/090 B14 5.8 309 1.5 40 CMP071/090 B14 4.7 349 1. 300 CMP071/090 B14 80A6 180 17 5. 5 CM050 B5/B14 (900 mn -1 ) 10 5 3.7 7.5 CM050 B5/B14 90 33.9 10 CM050 B5/B14 60 47.0 15 CM050 B5/B14 45 59 1.4 0 CM050 B5/B14 36 71 1.1 5 CM050 B5/B14 30 80 1. 30 CM050 B5/B14 45 61.5 0 CM063 B5/B14 36 74 1.9 5 CM063 B5/B14 30 8.3 30 CM063 B5/B14 3 10 1.6 40 CM063 B5/B14 18 10 1.3 50 CM063 B5/B14 15 137 1.0 60 CM063 B5/B14 15 159 1.4 60 CMP080/063 B14 1 188 1.1 75 CMP080/063 B14 10 08 1.4 90 CMP080/063 B14 3 105.3 40 CM070 B5/B14 18 14 1.7 50 CM070 B5/B14 15 141 1.5 60 CM070 B5/B14 15 164.1 60 CMP080/070 B14 1 193 1.6 75 CMP080/070 B14 11 170 1.1 80 CM070 B5/B14 10 15 1.9 90 CMP080/070 B14 7.5 63 1.4 10 CMP080/070 B14 6.0 306 1.0 150 CMP080/070 B14 18 16.1 50 CM075 B5/B14 15 141 1.8 60 CM075 B5/B14 15 164.5 60 CMP080/075 B14 1 196 1.9 75 CMP080/075 B14 11 173 1.3 80 CM075 B5/B14 10 15.3 90 CMP080/075 B14 9 196 1.0 100 CM075 B5/B14 7.5 68 1.6 10 CMP080/075 B14 11 188.0 80 CM090 B5/B14 10 9 3.7 90 CMP080/090 B14 9 16 1.6 100 CM090 B5/B14 7.5 8.6 10 CMP080/090 B14 6.0 39.0 150 CMP080/090 B14 5.0 374 1.5 180 CMP080/090 B14 6.0 346 3.4 150 CMP080/110 B14 5.0 40.5 180 CMP080/110 B14 3.8 480 1.8 40 CMP080/110 B14 3.0 543 1.4 300 CMP080/110 B14 0.55 71B 560 8 3.4 5 CM040 B5/B14 (800 mn -1 ) 373 13.5 7.5 CM040 B5/B14 80 16.0 10 CM040 B5/B14 187 4 1.5 15 CM040 B5/B14 140 31 1.0 0 CM040 B5/B14 140 3 1.7 0 CM050 B5/B14 11 38 1.3 5 CM050 B5/B14 93 44 1.5 30 CM050 B5/B14 70 56 1.1 40 CM050 B5/B14 56 67 0.9 50 CM050 B5/B14 47 83 1.0 60 CMP071/050 B14 37 99 0.8 75 CMP071/050 B14 31 113 0.9 90 CMP071/050 B14 70 57.0 40 CM063 B5/B14 56 68 1.5 50 CM063 B5/B14 47 79 1. 60 CM063 B5/B14 47 86 1.8 60 CMP071/063 B14 37 103 1.3 75 CMP071/063 B14 35 98 0.9 80 CM063 B5/B14 31 116 1.6 90 CMP071/063 B14 3 143 1.1 10 CMP071/063 B14 19 168 0.9 150 CMP071/063 B14 47 81 1.8 60 CM070 B5 47 87.6 60 CMP071/070 B14 37 106 1.9 75 CMP071/070 B14 35 101 1.3 80 CM070 B5 31 119.3 90 CMP071/070 B14 8 118 1.0 100 CM070 B5 3 148 1.6 10 CMP071/070 B14 19 174 1. 150 CMP071/070 B14 16 199 1.1 180 CMP071/070 B14 1 38 0.8 40 CMP071/070 B14 47 81.1 60 CM075 B5 47 87 3. 60 CMP071/075 B14 37 106.3 75 CMP071/075 B14 35 101 1.5 80 CM075 B5 31 11.7 90 CMP071/075 B14 8 118 1. 100 CM075 B5 3 150 1.9 10 CMP071/075 B14 19 176 1.5 150 CMP071/075 B14 16 199 1.3 180 CMP071/075 B14 1 43 0.9 40 CMP071/075 B14 35 107.4 80 CM090 B5 8 16 1.8 100 CM090 B5 3 157 3. 10 CMP071/090 B14 19 188.4 150 CMP071/090 B14 16 1.0 180 CMP071/090 B14 1 60 1.4 40 CMP071/090 B14 9.3 98 1.1 300 CMP071/090 B14 3.8 471.4 40 CMP080/130 B14 3.0 554 1.8 300 CMP080/130 B14 G14

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 71C4 80 17.5 5 CM040 B5/B14 (1400 mn -1 ) 187 4 1.8 7.5 CM040 B5/B14 140 3 1.4 10 CM040 B5/B14 93 46 1.0 15 CM040 B5/B14 140 3.6 10 CM050 B5/B14 93 46 1.8 15 CM050 B5/B14 70 59 1. 0 CM050 B5/B14 56 71 1.0 5 CM050 B5/B14 47 81 1.1 30 CM050 B5/B14 35 101 0.8 40 CM050 B5/B14 70 61. 0 CM063 B5/B14 56 73 1.8 5 CM063 B5/B14 47 84.0 30 CM063 B5/B14 35 105 1.4 40 CM063 B5/B14 8 14 1.1 50 CM063 B5/B14 3 14 0.9 60 CM063 B5/B14 3 161 1. 60 CMP071/063 B14 19 193 0.9 75 CMP071/063 B14 16 1 1.1 90 CMP071/063 B14 1 65 0.8 10 CMP071/063 B14 56 75.4 5 CM070 B5 35 108 1.9 40 CM070 B5 8 18 1.5 50 CM070 B5 3 146 1. 60 CM070 B5 3 163 1.7 60 CMP071/070 B14 19 196 1.3 75 CMP071/070 B14 18 180 0.9 80 CM070 B5 16 18 1.6 90 CMP071/070 B14 1 69 1.1 10 CMP071/070 B14 9.3 314 0.9 150 CMP071/070 B14 35 110.3 40 CM075 B5 8 19 1.8 50 CM075 B5 3 149 1.5 60 CM075 B5 3 165.0 60 CMP071/075 B14 19 199 1.5 75 CMP071/075 B14 18 180 1.1 80 CM075 B5 16 1.8 90 CMP071/075 B14 14 10 0.9 100 CM075 B5 1 74 1.3 10 CMP071/075 B14 9.3 30 1.0 150 CMP071/075 B14 7.8 357 0.9 180 CMP071/075 B14 18 19 1.7 80 CM090 B5 16 3 3.0 90 CMP071/090 B14 14 5 1.3 100 CM090 B5 1 87. 10 CMP071/090 B14 9.3 336 1.6 150 CMP071/090 B14 7.8 390 1.3 180 CMP071/090 B14 5.8 459 1.0 40 CMP071/090 B14 0.55 80A4 80 17 4.5 5 CM050 B5/B14 (1400 mn -1 ) 187 4 3. 7.5 CM050 B5/B14 140 3.6 10 CM050 B5/B14 93 46 1.8 15 CM050 B5/B14 70 59 1. 0 CM050 B5/B14 56 71 1.0 5 CM050 B5/B14 47 81 1.1 30 CM050 B5/B14 70 61. 0 CM063 B5/B14 56 73 1.8 5 CM063 B5/B14 47 84.0 30 CM063 B5/B14 35 105 1.4 40 CM063 B5/B14 8 14 1.1 50 CM063 B5/B14 3 14 0.9 60 CM063 B5/B14 3 161 1. 60 CMP080/063 B14 19 193 0.9 75 CMP080/063 B14 16 1 1.1 90 CMP080/063 B14 56 75.4 5 CM070 B5/B14 35 108 1.9 40 CM070 B5/B14 8 18 1.5 50 CM070 B5/B14 3 146 1. 60 CM070 B5/B14 3 163 1.7 60 CMP080/070 B14 19 196 1.3 75 CMP080/070 B14 18 180 0.9 80 CM070 B5/B14 16 18 1.6 90 CMP080/070 B14 1 69 1.1 10 CMP080/070 B14 35 110.3 40 CM075 B5/B14 8 19 1.8 50 CM075 B5/B14 3 149 1.5 60 CM075 B5/B14 3 165.0 60 CMP080/075 B14 19 199 1.5 75 CMP080/075 B14 18 180 1.1 80 CM075 B5/B14 16 1.8 90 CMP080/075 B14 14 10 0.9 100 CM075 B5/B14 1 74 1.3 10 CMP080/075 B14 9 30 1.0 150 CMP080/075 B14 3 158. 60 CM090 B5/B14 18 19 1.7 80 CM090 B5/B14 16 3 3.0 90 CMP080/090 B14 14 5 1.3 100 CM090 B5/B14 1 87. 10 CMP080/090 B14 9.3 336 1.6 150 CMP080/090 B14 7.8 390 1.3 180 CMP080/090 B14 3.8 459 1.0 40 CMP080/090 B14 18 04.8 80 CM110 B5 14 40. 100 CM110 B5 9.3 358.8 150 CMP080/110 B14 7.8 410. 180 CMP080/110 B14 5.8 503 1.5 40 CMP080/110 B14 4.7 574 1. 300 CMP080/110 B14 CM/CMP 7.8 44.6 180 CMP080/130 B14 5.8 51 1.9 40 CMP080/130 B14 4.7 585 1.5 300 CMP080/130 B14 G15

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 80B6 180 6 3.4 5 CM050 B5/B14 (900 mn -1 ) 10 37.5 7.5 CM050 B5/B14 90 49 1.9 10 CM050 B5/B14 60 69 1.4 15 CM050 B5/B14 45 88 0.9 0 CM050 B5/B14 60 71.5 15 CM063 B5/B14 45 91 1.7 0 CM063 B5/B14 36 109 1.3 5 CM063 B5/B14 30 13 1.5 30 CM063 B5/B14 3 15 1.1 40 CM063 B5/B14 18 178 0.8 50 CM063 15 37 1.0 60 CMP080/063 B14 1 79 0.8 75 CMP080/063 B14 10 309 0.9 90 CMP080/063 B14 45 9.5 0 CM070 B5/B14 36 11 1.8 5 CM070 B5/B14 30 16. 30 CM070 B5/B14 3 156 1.5 40 CM070 B5/B14 18 184 1. 50 CM070 B5/B14 15 10 1.0 60 CM070 B5/B14 15 44 1.4 60 CMP080/070 B14 1 87 1.1 75 CMP080/070 B14 10 319 1.3 90 CMP080/070 B14 7.5 391 0.9 10 CMP080/070 B14 36 11. 5 CM075 B5/B14 30 18.6 30 CM075 B5/B14 3 159 1.8 40 CM075 B5/B14 18 187 1.4 50 CM075 B5/B14 15 14 1. 60 CM075 B5/B14 15 44 1.7 60 CMP080/075 B14 1 9 1.3 75 CMP080/075 B14 11 57 0.9 80 CM075 B5/B14 10 319 1.6 90 CMP080/075 B14 7.5 398 1.1 10 CMP080/075 B14 6.0 463 0.8 150 CMP080/075 B14 15 8 1.8 60 CM090 B5/B14 15 54.8 60 CMP080/090 B14 1 305.1 75 CMP080/090 B14 11 80 1.4 80 CM090 B5/B14 10 340.5 90 CMP080/090 B14 9 31 1.1 100 CM090 B5/B14 7.5 419 1.8 10 CMP080/090 B14 6.0 489 1.3 150 CMP080/090 B14 5.0 556 1.0 180 CMP080/090 B14 3.8 645 0.8 40 CMP080/090 B14 11 94. 80 CM110 B5 9 344 1.7 100 CM110 B5 7.5 439 3.0 10 CMP080/110 B14 6.0 515.3 150 CMP080/110 B14 5.0 597 1.7 180 CMP080/110 B14 3.8 714 1. 40 CMP080/110 B14 3.0 806 1.0 300 CMP080/110 B14 0.75 80A 560 1 4.6 5 CM050 B5/B14 (800 mn -1 ) 373 17 3.3 7.5 CM050 B5/B14 80 3.7 10 CM050 B5/B14 187 33 1.9 15 CM050 B5/B14 140 43 1.3 0 CM050 B5/B14 11 5 1.0 5 CM050 B5/B14 93 60 1.1 30 CM050 B5/B14 140 43.4 0 CM063 B5/B14 11 53 1.8 5 CM063 B5/B14 93 61.1 30 CM063 B5/B14 70 78 1.4 40 CM063 B5/B14 56 93 1.1 50 CM063 B5/B14 47 107 0.9 60 CM063 B5/B14 47 117 1.3 60 CMP080/063 B14 37 141 1.0 75 CMP080/063 B14 31 158 1. 90 CMP080/063 B14 56 96 1.6 50 CM070 B5/B14 47 111 1.3 60 CM070 B5/B14 47 119 1.9 60 CMP080/070 B14 37 145 1.4 75 CMP080/070 B14 35 139 0.9 80 CM070 B5/B14 31 16 1.7 90 CMP080/070 B14 3 0 1. 10 CMP080/070 B14 70 80.5 40 CM075 B5/B14 56 96 1.9 50 CM075 B5/B14 47 111 1.5 60 CM075 B5/B14 47 119.3 60 CMP080/075 B14 37 145 1.7 75 CMP080/075 B14 35 139 1.1 80 CM075 B5/B14 31 165.0 90 CMP080/075 B14 8 161 0.9 100 CM075 B5/B14 3 05 1.4 10 CMP080/075 B14 19 41 1.1 150 CMP080/075 B14 47 115.4 60 CM090 B5/B14 35 145 1.8 80 CM090 B5/B14 31 171 3.3 90 CMP080/090 B14 8 171 1.3 100 CM090 B5/B14 3 14.3 10 CMP080/090 B5/B14 19 56 1.7 150 CMP080/090 B14 16 89 1.4 180 CMP080/090 B14 1 355 1.1 40 CMP080/090 B14 8 179. 100 CM110 B5 19 71 3.0 150 CMP080/110 B14 16 307.4 180 CMP080/110 B14 1 379 1.7 40 CMP080/110 B14 9.3 444 1.3 300 CMP080/110 B14 16 316.9 180 CMP080/130 B14 1 385. 40 CMP080/130 B14 9.3 444 1.7 300 CMP080/130 B14 5.0 587. 180 CMP080/130 B14 3.8 700 1.6 40 CMP080/130 B14 3.0 84 1. 300 CMP080/130 B14 G16

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.75 80B4 80 3 3.3 5 CM050 B5/B14 (1400 mn -1 ) 187 33.4 7.5 CM050 B5/B14 140 43 1.9 10 CM050 B5/B14 93 63 1.3 15 CM050 B5/B14 70 81 0.9 0 CM050 B5/B14 56 97 0.7 5 CM050 B5/B14 47 111 0.8 30 CM050 B5/B14 93 64.4 15 CM063 B5/B14 70 83 1.6 0 CM063 B5/B14 56 100 1.4 5 CM063 B5/B14 47 115 1.4 30 CM063 B5/B14 35 143 1.0 40 CM063 B5/B14 8 169 0.8 50 CM063 B5/B14 3 0 0.9 60 CMP080/063 B14 19 63 0.7 75 CMP080/063 B14 16 89 0.8 90 CMP080/063 B14 0.75 80B4 7.8 560 1.6 180 CMP080/110 B14 (1400 mn -1 ) 5.8 686 1.1 40 CMP080/110 B14 4.7 78 0.9 300 CMP080/110 B14 14 37. 100 CM130 B5 9.3 504.4 150 CMP080/130 B14 7.8 578 1.9 180 CMP080/130 B14 5.8 698 1.4 40 CMP080/130 B14 4.7 797 1.1 300 CMP080/130 B14 90S6 180 35 4.6 5 CM063 B5/B14 (900 mn -1 ) 10 51 3.3 7.5 CM063 B5/B14 90 67.6 10 CM063 B5/B14 60 97 1.8 15 CM063 B5/B14 45 14 1. 0 CM063 B5/B14 36 149 0.9 5 CM063 B5/B14 30 167 1.1 30 CM063 B5/B14 70 85.4 0 CM070 B5/B14 56 10 1.8 5 CM070 B5/B14 47 118.1 30 CM070 B5/B14 35 149 1.4 40 CM070 B5/B14 8 177 1.1 50 CM070 B5/B14 3 03 0.9 60 CM070 B5/B14 3 3 1.3 60 CMP080/070 B14 19 67 0.9 75 CMP080/070 B14 16 98 1.1 90 CMP080/070 B14 1 367 0.8 10 CMP080/070 B14 70 85.8 0 CM075 B5/B14 56 10. 5 CM075 B5/B14 47 118.4 30 CM075 B5/B14 35 149 1.7 40 CM075 B5/B14 8 177 1.3 50 CM075 B5/B14 3 03 1.1 60 CM075 B5/B14 3 6 1.5 60 CMP080/075 B14 19 71 1.1 75 CMP080/075 B14 18 46 0.8 80 CM075 B5/B14 16 30 1.3 90 CMP080/075 B14 1 373 1.0 10 CMP080/075 B14 9 436 0.8 150 CMP080/075 B14 35 156.8 40 CM090 B5/B14 8 184.1 50 CM090 B5/B14 3 1 1.6 60 CM090 B5/B14 3 35.4 60 CMP080/090 B14 19 8 1.8 75 CMP080/090 B14 18 6 1. 80 CM090 B5/B14 16 316. 90 CMP080/090 B14 14 307 1.0 100 CM090 B5/B14 1 391 1.6 10 CMP080/090 B14 9.3 459 1. 150 CMP080/090 B14 7.8 535 0.9 180 CMP080/090 B14 3 4.8 60 CM110 B5 19 93 3.1 75 CMP080/110 B14 18 78.0 80 CM110 B5 16 35 3.5 90 CMP080/110 B14 14 37 1.6 100 CM110 B5 1 415.6 10 CMP080/110 B14 9.3 489.0 150 CMP080/110 B14 45 17 1.8 0 CM070 B5/B14 36 153 1.3 5 CM070 B5/B14 30 174 1.6 30 CM070 B5/B14 3 16 1.1 40 CM070 B5/B14 15 33 1.0 60 CMP090/070 B5/B14 1 39 0.8 75 CMP090/070 B5/B14 10 435 1.0 90 CMP090/070 B5/B14 8 533 0.7 10 CMP090/070 B5/B14 60 98.6 15 CM075 B5/B14 45 17. 0 CM075 B5/B14 36 153 1.6 5 CM075 B5/B14 30 174 1.9 30 CM075 B5/B14 3 16 1.3 40 CM075 B5/B14 18 51 0.9 50 CM075 B5/B14 15 33 1. 60 CMP090/075 B5/B14 1 398 0.9 75 CMP090/075 B5/B14 10 435 1.1 90 CMP090/075 B5/B14 8 543 0.8 10 CMP090/075 B5/B14 3 9. 40 CM090 B5/B14 18 71 1.6 50 CM090 B5/B14 15 310 1.4 60 CM090 B5/B14 11 376 1.0 80 CM090 B5/B14 15 346.1 60 CMP090/090 B5/B14 1 415 1.5 75 CMP090/090 B5/B14 10 463 1.8 90 CMP090/090 B5/B14 8 571 1.3 10 CMP090/090 B5/B14 6 667 1.0 150 CMP090/090 B5/B14 5 758 0.8 180 CMP090/090 B5/B14 18 83.8 50 CM110 B5/B14 15 35.3 60 CM110 B5/B14 15 360 3.4 60 CMP090/110 B5/B14 1 433.7 75 CMP090/110 B5/B14 11 401 1.6 80 CM110 B5/B14 10 470 3.0 90 CMP090/110 B5/B14 9 470 1.3 100 CM110 B5/B14 8 599. 10 CMP090/110 B5/B14 6 70 1.7 150 CMP090/110 B5/B14 5 814 1.3 180 CMP090/110 B5/B14 4 973 0.9 40 CMP090/110 B5/B14 3 1100 0.7 300 CMP090/110 B5/B14 CM/CMP G17

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.75 90S6 6 714.1 150 CMP090/130 B5/B14 (900 mn -1 ) 5 800 1.7 180 CMP090/130 B5/B14 4 955 1.3 40 CMP090/130 B5/B14 3 113 1.0 300 CMP090/130 B5/B14 1.1 80B 560 17 3. 5 CM050 B5/B14 (800 mn -1 ) 373 5.3 7.5 CM050 B5/B14 80 33 1.8 10 CM050 B5/B14 187 48 1.3 15 CM050 B5/B14 140 63 0.9 0 CM050 B5/B14 187 48.4 15 CM063 B5/B14 140 63 1.6 0 CM063 B5/B14 11 78 1. 5 CM063 B5/B14 93 89 1.4 30 CM063 B5/B14 70 114 1.0 40 CM063 B5/B14 47 17 0.9 60 CMP080/063 B14 37 07 0.7 75 CMP080/063 B14 31 3 0.8 90 CMP080/063 B14 11 79 1.7 5 CM070 B5/B14 70 117 1.4 40 CM070 B5/B14 56 141 1.1 50 CM070 B5/B14 47 16 0.9 60 CM070 B5/B14 47 174 1.3 60 CMP080/070 37 1 1.0 75 CMP080/070 B14 31 38 1. 90 CMP080/070 B14 3 96 0.8 10 CMP080/070 B14 93 91.4 30 CM075 B5/B14 70 117 1.7 40 CM075 B5/B14 56 141 1.3 50 CM075 B5/B14 47 16 1.1 60 CM075 B5/B14 47 174 1.6 60 CMP080/075 B14 37 1 1.1 75 CMP080/075 B14 31 4 1.4 90 CMP080/075 B14 3 300 1.0 10 CMP080/075 B14 1.1 80C4 80 33. 5 CM050 B5/B14 (1400 mn -1 ) 187 49 1.6 7.5 CM050 B5/B14 140 64 1.3 10 CM050 B5/B14 93 9 0.9 15 CM050 B5/B14 80 34 4.0 5 CM063 B5/B14 187 50.9 7.5 CM063 B5/B14 140 65.3 10 CM063 B5/B14 93 95 1.6 15 CM063 B5/B14 70 1 1.1 0 CM063 B5/B14 56 146 0.9 5 CM063 B5/B14 47 169 1.0 30 CM063 B5/B14 93 95.3 15 CM070 B5/B14 70 15 1.6 0 CM070 B5/B14 56 150 1. 5 CM070 B5/B14 47 173 1.4 30 CM070 B5/B14 35 19 1.0 40 CM070 B5/B14 3 36 0.9 60 CMP080/070 B14 16 437 0.8 90 CMP080/070 B14 70 15 1.9 0 CM075 B5/B14 56 150 1.5 5 CM075 B5/B14 47 173 1.7 30 CM075 B5/B14 35 19 1.1 40 CM075 B5/B14 8 59 0.9 50 CM075 B5/B14 3 331 1.0 60 CMP080/075 B14 19 397 0.8 75 CMP080/075 B14 16 443 0.9 90 CMP080/075 B14 35 8 1.9 40 CM090 B5/B14 8 70 1.4 50 CM090 B5/B14 3 311 1.1 60 CM090 B5/B14 3 344 1.7 60 CMP080/090 B14 19 414 1. 75 CMP080/090 B14 18 384 0.8 80 CM090 B5/B14 16 463 1.5 90 CMP080/090 B14 1 574 1.1 10 CMP080/090 B14 9.3 673 0.8 150 CMP080/090 B14 G18 56 146.1 50 CM090 B5/B14 47 169 1.6 60 CM090 B5/B14 47 181.6 60 CMP080/090 B14 37 1 1.9 75 CMP080/090 B14 35 13 1. 80 CM090 B5/B14 31 51.3 90 CMP080/090 B14 8 51 0.9 100 CM090 B5/B14 3 313 1.6 10 CMP080/090 B14 19 375 1. 150 CMP080/090 B14 16 44 1.0 180 CMP080/090 B14 35 19.0 80 CM110 B5 8 63 1.5 100 CM110 B5 3 335.6 10 CMP080/110 B14 19 397.0 150 CMP080/110 B14 16 450 1.6 180 CMP080/110 B14 1 556 1. 40 CMP080/110 B14 9.3 651 0.9 300 CMP080/110 B14 19 403.5 150 CMP080/130 B14 16 463.0 180 CMP080/130 B14 1 565 1.5 40 CMP080/130 B14 9.3 651 1. 300 CMP080/130 B14 8 85.5 50 CM110 B5 3 39 1.9 60 CM110 B5 3 353.7 60 CMP080/110 B14 19 430.1 75 CMP080/110 B14 18 408 1.4 80 CM110 B5 16 477.4 90 CMP080/110 B14 14 480 1.1 100 CM110 B5 1 609 1.8 10 CMP080/110 B14 9.3 717 1.4 150 CMP080/110 B14 7.8 81 1.1 180 CMP080/110 B14 6.0 1006 0.8 40 CMP080/110 B14 3 34 3.0 60 CM130 B5 18 414.0 80 CM130 B5 16 477 3.1 90 CMP080/130 B14 14 480 1.5 100 CM130 B5 1 600.3 10 CMP080/130 B14 9.3 739 1.7 150 CMP080/130 B14 7.8 847 1.3 180 CMP080/130 B14 5.8 104 0.9 40 CMP080/130 B14

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 1.1 90S4 80 34 4.0 5 CM063 B5/B14 (1400 mn -1 ) 187 50.9 7.5 CM063 B5/B14 140 65.3 10 CM063 B5/B14 93 95 1.6 15 CM063 B5/B14 70 1 1.1 0 CM063 B5/B14 56 146 0.9 5 CM063 B5/B14 47 169 1.0 30 CM063 B5/B14 140 65 3.3 10 CM070 B5/B14 93 95.3 15 CM070 B5/B14 70 15 1.6 0 CM070 B5/B14 56 150 1. 5 CM070 B5/B14 47 173 1.4 30 CM070 B5/B14 35 19 1.0 40 CM070 B5/B14 3 36 0.9 60 CMP090/070 B5/B14 19 39 0.7 75 CMP090/070 B5/B14 16 437 0.8 90 CMP090/070 B5/B14 93 95.8 15 CM075 B5/B14 70 15 1.9 0 CM075 B5/B14 56 150 1.5 5 CM075 B5/B14 47 173 1.7 30 CM075 B5/B14 35 19 1.1 40 CM075 B5/B14 8 59 0.9 50 CM075 B5/B14 3 331 1.0 60 CMP090/075 B5/B14 19 397 0.8 75 CMP090/075 B5/B14 16 443 0.9 90 CMP090/075 B5/B14 56 156.4 5 CM090 B5/B14 47 178.7 30 CM090 B5/B14 35 8 1.9 40 CM090 B5/B14 8 70 1.4 50 CM090 B5/B14 3 311 1.1 60 CM090 B5/B14 3 344 1.7 60 CMP090/090 B5/B14 19 414 1. 75 CMP090/090 B5/B14 18 384 0.8 80 CM090 B5/B14 16 463 1.5 90 CMP090/090 B5/B14 1 574 1.1 10 CMP090/090 B5/B14 9 673 0.8 150 CMP090/090 B5/B14 35 37 3. 40 CM110 B5/B14 8 85.5 50 CM110 B5/B14 3 39 1.9 60 CM110 B5/B14 3 353.7 60 CMP090/110 B5/B14 19 430.1 75 CMP090/110 B5/B14 18 408 1.4 80 CM110 B5/B14 16 477.4 90 CMP090/110 B5/B14 14 480 1.1 100 CM110 B5/B14 1 609 1.8 10 CMP090/110 B5/B14 9 717 1.4 150 CMP090/110 B5/B14 8 81 1.1 180 CMP090/110 B5/B14 6 1006 0.8 40 CMP090/110 B5/B14 18 414.0 80 CM130 B5 14 480 1.5 100 CM130 B5 1 600.1 10 CMP090/130 B5/B14 9 739 1.7 150 CMP090/130 B5/B14 8 847 1.3 180 CMP090/130 B5/B14 6 104 1.0 40 CMP090/130 B5/B14 5 1169 0.7 300 CMP090/130 B5/B14 1.1 90L6 180 5 3.1 5 CM063 B5/B14 (900 mn -1 ) 10 75. 7.5 CM063 B5/B14 90 98 1.8 10 CM063 B5/B14 60 14 1.3 15 CM063 B5/B14 45 18 0.8 0 CM063 B5/B14 10 76 3.1 7.5 CM070 B5/B14 90 99.5 10 CM070 B5/B14 60 145 1.8 15 CM070 B5/B14 45 187 1. 0 CM070 B5/B14 36 5 0.9 5 CM070 B5/B14 30 56 1.1 30 CM070 B5/B14 3 39 0.8 40 CM070 B5/B14 15 487 0.7 60 CMP090/070 B5/B14 10 638 0.7 90 CMP090/070 B5/B14 60 145. 15 CM075 B5/B14 45 187 1.5 0 CM075 B5/B14 36 5 1.1 5 CM075 B5/B14 30 56 1.3 30 CM075 B5/B14 3 317 0.9 40 CM075 B5/B14 15 487 0.8 60 CMP090/075 B5/B14 1 583 0.7 75 CMP090/075 B5/B14 10 638 0.8 90 CMP090/075 B5/B14 45 191.5 0 CM090 B5/B14 36 33 1.8 5 CM090 B5/B14 30 66.1 30 CM090 B5/B14 3 336 1.5 40 CM090 B5/B14 18 397 1.1 50 CM090 B5/B14 15 455 0.9 60 CM090 B5/B14 15 508 1.4 60 CMP090/090 B5/B14 1 609 1.0 75 CMP090/090 B5/B14 10 679 1.3 90 CMP090/090 B5/B14 8 837 0.9 10 CMP090/090 B5/B14 18 414 1.9 50 CM110 B5/B14 15 476 1.5 60 CM110 B5/B14 15 58.3 60 CMP090/110 B5/B14 1 635 1.8 75 CMP090/110 B5/B14 11 588 1.1 80 CM110 B5/B14 10 690.0 90 CMP090/110 B5/B14 9 689 0.9 100 CM110 B5/B14 8 878 1.5 10 CMP090/110 B5/B14 6 109 1.1 150 CMP090/110 B5/B14 5 1194 0.9 180 CMP090/110 B5/B14 15 490.0 60 CM130 B5 11 598 1.5 80 CM130 B5 9 689 1.1 100 CM130 B5 8 865 1.9 10 CMP090/130 B5/B14 6 1047 1.4 150 CMP090/130 B5/B14 5 1174 1. 180 CMP090/130 B5/B14 4 1400 0.9 40 CMP090/130 B5/B14 CM/CMP G19

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M G0 1.5 90S 560 3 4. 5 CM063 B5/B14 (800 mn -1 ) 373 35 3.0 7.5 CM063 B5/B14 80 45.4 10 CM063 B5/B14 187 66 1.7 15 CM063 B5/B14 140 86 1. 0 CM063 B5/B14 11 106 0.9 5 CM063 B5/B14 93 11 1.0 30 CM063 B5/B14 187 67.5 15 CM070 B5/B14 140 87 1.8 0 CM070 B5/B14 11 107 1.3 5 CM070 B5/B14 93 14 1.5 30 CM070 B5/B14 70 160 1.1 40 CM070 B5/B14 56 189 0.8 50 CM070 B5/B14 47 38 1.0 60 CMP090/070 B5/B14 37 90 0.7 75 CMP090/070 B5/B14 31 35 0.8 90 CMP090/070 B5/B14 140 87.1 0 CM075 B5/B14 11 107 1.5 5 CM075 B5/B14 93 14 1.8 30 CM075 B5/B14 70 160 1. 40 CM075 B5/B14 56 19 0.9 50 CM075 B5/B14 47 38 1. 60 CMP090/075 B5/B14 37 90 0.8 75 CMP090/075 B5/B14 31 39 1.0 90 CMP090/075 B5/B14 70 164.1 40 CM090 B5/B14 56 00 1.5 50 CM090 B5/B14 47 30 1. 60 CM090 B5/B14 47 47 1.9 60 CMP090/090 B5/B14 37 301 1.4 75 CMP090/090 B5/B14 35 87 0.9 80 CM090 B5/B14 31 343 1.7 90 CMP090/090 B5/B14 3 47 1. 10 CMP090/090 B5/B14 19 511 0.9 150 CMP090/090 B5/B14 56 0.7 50 CM110 B5/B14 47 36.1 60 CM110 B5/B14 37 308.5 75 CMP090/110 B5/B14 35 99 1.4 80 CM110 B5/B14 31 347.8 90 CMP090/110 B5/B14 8 358 1.1 100 CM110 B5/B14 3 457 1.9 10 CMP090/110 B5/B14 19 541 1.5 150 CMP090/110 B5/B14 16 614 1. 180 CMP090/110 B5/B14 1 758 0.9 40 CMP090/110 B5/B14 47 36.7 60 CM130 B5 35 95.0 80 CM130 B5 8 358 1.5 100 CM130 B5 3 445.5 10 CMP090/130 B5/B14 19 549 1.9 150 CMP090/130 B5/B14 16 63 1.5 180 CMP090/130 B5/B14 1 770 1.1 40 CMP090/130 B5/B14 9 887 0.9 300 CMP090/130 B5/B14 90L4 80 46.9 5 CM063 B5/B14 (1400 mn -1 ) 187 68.1 7.5 CM063 B5/B14 140 88 1.7 10 CM063 B5/B14 93 19 1. 15 CM063 B5/B14 70 166 0.8 0 CM063 B5/B14 1.5 90L4 140 89.4 10 CM070 B5/B14 (1400 mn -1 ) 93 19 1.7 15 CM070 B5/B14 70 170 1. 0 CM070 B5/B14 56 05 0.9 5 CM070 B5/B14 47 36 1.0 30 CM070 B5/B14 93 19.1 15 CM075 B5/B14 70 170 1.4 0 CM075 B5/B14 56 05 1.1 5 CM075 B5/B14 47 36 1. 30 CM075 B5/B14 35 99 0.8 40 CM075 B5/B14 70 17.4 0 CM090 B5/B14 56 1 1.7 5 CM090 B5/B14 47 43.0 30 CM090 B5/B14 35 311 1.4 40 CM090 B5/B14 8 368 1.0 50 CM090 B5/B14 3 44 0.8 60 CM090 B5/B14 3 469 1. 60 CMP090/090 B5/B14 19 564 0.9 75 CMP090/090 B5/B14 16 63 1.1 90 CMP090/090 B5/B14 1 78 0.8 10 CMP090/090 B5/B14 35 33.4 40 CM110 B5/B14 8 389 1.8 50 CM110 B5/B14 3 448 1.4 60 CM110 B5/B14 3 481.0 60 CMP090/110 B5/B14 19 587 1.5 75 CMP090/110 B5/B14 18 557 1.0 80 CM110 B5/B14 14 655 0.8 100 CM110 B5/B14 16 650 1.8 90 CMP090/110 B5/B14 1 830 1.3 10 CMP090/110 B5/B14 9 978 1.0 150 CMP090/110 B5/B14 8 1119 0.8 180 CMP090/110 B5/B14 8 389.5 50 CM130 B5 3 448.0 60 CM130 B5 19 579.1 75 CMP090/130 B5/B14 18 565 1.5 80 CM130 B5 16 650. 90 CMP090/130 B5/B14 14 655 1.1 100 CM130 B5 1 818 1.5 10 CMP090/130 B5/B14 9 1008 1. 150 CMP090/130 B5/B14 8 1155 0.9 180 CMP090/130 B5/B14 6 1396 0.7 40 CMP090/130 B5/B14 100LA6 10 104.3 7.5 CM070 B5/B14 (900 mn -1 ) 90 135 1.9 10 CM070 B5/B14 60 198 1.3 15 CM070 B5/B14 45 51 0.9 0 CM070 B5/B14 10 104.7 7.5 CM075 B5/B14 90 135. 10 CM075 B5/B14 60 198 1.6 15 CM075 B5/B14 45 51 1. 0 CM075 B5/B14 36 306 0.8 5 CM075 B5/B14 30 349 0.9 30 CM075 B5/B14

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 1.5 100LA6 60 01.6 15 CM090 B5/B14 (900 mn -1 ) 45 61 1.8 0 CM090 B5/B14 36 318 1.3 5 CM090 B5/B14 30 363 1.6 30 CM090 B5/B14 3 45 1.1 40 CM090 B5/B14 45 67 3.1 0 CM110 B5/B14 36 36.4 5 CM110 B5/B14 30 37.6 30 CM110 B5/B14 3 478 1.8 40 CM110 B5/B14 18 565 1.4 50 CM110 B5/B14 15 649 1.1 60 CM110 B5/B14. 90L 47 347 1.8 60 CM130 B5 (800 mn -1 ) 35 43 1.3 80 CM130 B5 8 55 1.0 100 CM130 B5 3 653 1.7 10 CMP090/130 B5/B14 19 805 1.3 150 CMP090/130 B5/B14 16 97 1.0 180 CMP090/130 B5/B14 1 119 0.8 40 CMP090/130 B5/B14 100LA4 187 100.0 7.5 CM070 B5/B14 (1400 mn -1 ) 140 131 1.7 10 CM070 B5/B14 93 189 1. 15 CM070 B5/B14 70 49 0.8 0 CM070 B5/B14. 3 471.3 40 CM130 B5 18 581 1.8 50 CM130 B5 15 669 1.5 60 CM130 B5 11 815 1.1 80 CM130 B5 9 939 0.8 100 CM130 B5 90L 373 51.0 7.5 CM063 B5/B14 (800 mn -1 ) 80 66 1.7 10 CM063 B5/B14 187 97 1. 15 CM063 B5/B14 140 16 0.8 0 CM063 B5/B14 187 98 1.7 15 CM070 B5/B14 140 18 1. 0 CM070 B5/B14 11 158 0.9 5 CM070 B5/B14 93 18 1.0 30 CM070 B5/B14 187 98.0 15 CM075 B5/B14 140 18 1.4 0 CM075 B5/B14 11 158 1.0 5 CM075 B5/B14 93 18 1. 30 CM075 B5/B14 70 34 0.8 40 CM075 B5/B14 140 19.4 0 CM090 B5/B14 11 159 1.8 5 CM090 B5/B14 93 187.1 30 CM090 B5/B14 70 40 1.4 40 CM090 B5/B14 56 93 1.0 50 CM090 B5/B14 47 338 0.8 60 CM090 B5/B14 47 36 1.3 60 CMP090/090 B5/B14 37 441 1.0 75 CMP090/090 B5/B14 31 503 1.1 90 CMP090/090 B5/B14 3 67 0.8 10 CMP090/090 B5/B14 187 100.4 7.5 CM075 B5/B14 140 131.0 10 CM075 B5/B14 93 189 1.4 15 CM075 B5/B14 70 49 1.0 0 CM075 B5/B14 56 300 0.8 5 CM075 B5/B14 47 347 1.0 30 CM075 B5/B14 140 13.8 10 CM090 B5/B14 93 194. 15 CM090 B5/B14 70 5 1.6 0 CM090 B5/B14 56 311 1. 5 CM090 B5/B14 47 356 1.4 30 CM090 B5/B14 35 456 1.0 40 CM090 B5/B14 70 55.9 0 CM110 B5/B14 56 315.1 5 CM110 B5/B14 47 360. 30 CM110 B5/B14 35 474 1.6 40 CM110 B5/B14 8 570 1. 50 CM110 B5/B14 3 657 1.0 60 CM110 B5/B14 35 456.3 40 CM130 B5 8 563 1.7 50 CM130 B5 3 657 1.4 60 CM130 B5 18 88 1.0 80 CM130 B5 14 960 0.8 100 CM130 B5 11M6 10 154.7 7.5 CM090 B5/B14 (900 mn -1 ) 90 03. 10 CM090 B5/B14 60 94 1.7 15 CM090 B5/B14 45 383 1. 0 CM090 B5/B14 36 467 0.9 5 CM090 B5/B14 30 53 1.1 30 CM090 B5/B14 3 663 0.8 40 CM090 B5/B14 CM/CMP 70 43.4 40 CM110 B5/B14 56 96 1.8 50 CM110 B5/B14 47 347 1.4 60 CM110 B5/B14 47 371. 60 CMP090/110 B5/B14 37 45 1.7 75 CMP090/110 B5/B14 35 438 1.0 80 CM110 B5/B14 31 510 1.9 90 CMP090/110 B5/B14 3 671 1.3 10 CMP090/110 B5/B14 19 794 1.0 150 CMP090/110 B5/B14 16 900 0.8 180 CMP090/110 B5/B14 45 388.1 0 CM110 B5/B14 36 479 1.6 5 CM110 B5/B14 30 546 1.8 30 CM110 B5/B14 3 700 1.3 40 CM110 B5/B14 18 89 1.0 50 CM110 B5/B14 3 691 1.6 40 CM130 B5 18 85 1. 50 CM130 B5 15 980 1.0 60 CM130 B5 G1

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 3.0 100LA 80 91 1.7 10 CM070 B5/B14 (800 mn -1 ) 187 134 1. 15 CM070 B5/B14 140 174 0.9 0 CM070 B5/B14 93 46 0.8 30 CM070 B5/B14 373 69.5 7.5 CM075 B5/B14 80 91.1 10 CM075 B5/B14 187 134 1.5 15 CM075 B5/B14 140 174 1.1 0 CM075 B5/B14 11 15 0.8 5 CM075 B5/B14 93 49 0.9 30 CM075 B5/B14 187 135.4 15 CM090 B5/B14 140 176 1.8 0 CM090 B5/B14 11 17 1.3 5 CM090 B5/B14 93 55 1.5 30 CM090 B5/B14 70 37 1.0 40 CM090 B5/B14 11 0.3 5 CM110 B5/B14 93 5.5 30 CM110 B5/B14 70 33 1.8 40 CM110 B5/B14 56 404 1.3 50 CM110 B5/B14 47 473 1.0 60 CM110 B5/B14 56 404 1.7 50 CM130 B5 47 473 1.3 60 CM130 B5 35 589 0.9 80 CM130 B5 100LB4 187 137 1.5 7.5 CM070 B5/B14 (1400 mn -1 ) 140 178 1. 10 CM070 B5/B14 93 58 0.9 15 CM070 B5/B14 187 137 1.7 7.5 CM075 B5/B14 140 178 1.4 10 CM075 B5/B14 93 58 1.0 15 CM075 B5/B14 187 138.5 7.5 CM090 B5/B14 140 180.1 10 CM090 B5/B14 93 64 1.6 15 CM090 B5/B14 70 344 1. 0 CM090 B5/B14 56 45 0.9 5 CM090 B5/B14 47 485 1.0 30 CM090 B5/B14 35 6 0.8 40 CM090 B5/B14 93 64.7 15 CM110 B5/B14 70 348.1 0 CM110 B5/B14 56 430 1.6 5 CM110 B5/B14 47 491 1.6 30 CM110 B5/B14 35 647 1. 40 CM110 B5/B14 8 778 0.9 50 CM110 B5/B14 47 485. 30 CM130 B5 35 6 1.7 40 CM130 B5 8 767 1.3 50 CM130 B5 3 896 1.0 60 CM130 B5 3.0 13S6 10 10 3.5 7.5 CM110 B5/B14 (900 mn -1 ) 90 77.9 10 CM110 B5/B14 60 401. 15 CM110 B5/B14 45 58 1.5 0 CM110 B5/B14 36 653 1. 5 CM110 B5/B14 30 735 1.3 30 CM110 B5/B14 4.0 45 5.0 0 CM130 36 645 1.6 5 CM130 B5/B14 30 735 1.6 30 CM130 B5/B14 3 94 1. 40 CM130 B5/B14 11M 373 9 1.5 7.5 CM070 B5/B14 (800 mn -1 ) 80 11 1.3 10 CM070 B5/B14 187 178 0.9 15 CM070 B5/B14 373 9 1.9 7.5 CM075 B5/B14 80 11 1.5 10 CM075 B5/B14 187 178 1.1 15 CM075 B5/B14 140 3 0.8 0 CM075 B5/B14 80 13.3 10 CM090 B5/B14 187 180 1.8 15 CM090 B5/B14 140 35 1.3 0 CM090 B5/B14 93 336 1.1 30 CM090 B5/B14 70 437 0.8 40 CM090 B5/B14 140 37.3 0 CM110 B5/B14 11 93 1.7 5 CM110 B5/B14 93 336 1.9 30 CM110 B5/B14 70 44 1.3 40 CM110 B5/B14 56 539 1.0 50 CM110 B5/B14 11M4 187 18 1.1 7.5 CM070 B5/B14 (1400 mn -1 ) 140 37 0.9 10 CM070 B5/B14 187 18 1.3 7.5 CM075 B5/B14 140 37 1.1 10 CM075 B5/B14 93 344 0.8 15 CM075 B5/B14 187 184 1.9 7.5 CM090 B5/B14 140 40 1.6 10 CM090 B5/B14 93 35 1. 15 CM090 B5/B14 70 458 0.9 0 CM090 B5/B14 47 655 0.8 30 CM090 B5/B14 140 40.8 10 CM110 B5/B14 93 35.1 15 CM110 B5/B14 70 464 1.6 0 CM110 B5/B14 56 573 1. 5 CM110 B5/B14 47 655 1. 30 CM110 B5/B14 35 86 0.9 40 CM110 B5/B14 70 458.0 0 CM130 B5 56 566 1.6 5 CM130 B5 47 647 1.6 30 CM130 B5 35 89 1.3 40 CM130 B5 8 103 0.9 50 CM130 B5 G

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 4.0 13L6 10 80.6 7.5 CM110 B5/B14 (900 mn -1 ) 90 369. 10 CM110 B5/B14 60 535 1.6 15 CM110 B5/B14 45 705 1.1 0 CM110 B5/B14 36 870 0.9 5 CM110 B5/B14 30 980 1.0 30 CM110 B5/B14 7.5 13SB 373 173.5 7.5 CM110 B5/B14 (800 mn -1 ) 80 8. 10 CM110 B5/B14 187 338 1.6 15 CM110 B5/B14 140 445 1. 0 CM110 B5/B14 11 550 0.9 5 CM110 B5/B14 93 69 1.0 30 CM110 B5/B14 5.5 45 696 1.5 0 CM130 B5/B14 36 860 1. 5 CM130 B5/B14 30 980 1. 30 CM130 B5/B14 13SA 373 17 3.5 7.5 CM110 B5/B14 (800 mn -1 ) 80 167.9 10 CM110 B5/B14 187 48. 15 CM110 B5/B14 140 36 1.6 0 CM110 B5/B14 11 403 1.3 5 CM110 B5/B14 93 461 1.4 30 CM110 B5/B14 140 36.1 0 CM130 B5/B14 11 403 1.6 5 CM130 B5/B14 93 461 1.7 30 CM130 B5/B14 70 600 1.3 40 CM130 B5/B14 187 338.1 15 CM130 B5/B14 140 445 1.5 0 CM130 B5/B14 11 550 1. 5 CM130 B5/B14 93 69 1.3 30 CM130 B5/B14 70 819 0.9 40 CM130 B5/B14 13MA4 187 341 1.8 7.5 CM110 B5/B14 (1400 mn -1 ) 140 450 1.5 10 CM110 B5/B14 93 660 1.1 15 CM110 B5/B14 70 870 0.9 0 CM110 B5/B14 187 341. 7.5 CM130 B5/B14 140 450 1.8 10 CM130 B5/B14 93 660 1.4 15 CM130 B5/B14 70 860 1.1 0 CM130 B5/B14 56 106 0.9 5 CM130 B5/B14 47 113 0.9 30 CM130 B5/B14 CM/CMP 13S4 187 50.4 7.5 CM110 B5/B14 (1400 mn -1 ) 140 330.0 10 CM110 B5/B14 93 484 1.5 15 CM110 B5/B14 70 638 1. 0 CM110 B5/B14 56 788 0.9 5 CM110 B5/B14 47 91 0.9 30 CM110 B5/B14 187 50 3.0 7.5 CM130 B5/B14 140 330.5 10 CM130 B5/B14 93 484 1.9 15 CM130 B5/B14 70 630 1.4 0 CM130 B5/B14 56 778 1. 5 CM130 B5/B14 47 889 1. 30 CM130 B5/B14 35 1141 0.9 40 CM130 B5/B14 G3

CM/CMP Motorduttor a vte senza fne Wormgearmotors Motor applcabl IEC Motor adapters IEC N M P D CM06 56B14 50 65 80 9 5 7.5 10 15 0 5 30 40 50 60 80 100 CM030 63B5 95 115 140 11 63B14 60 75 90 56B5 80 100 10 9 B B B B B B B B B 56B14 50 65 80 P M N D CM040 71B5 110 130 160 14 71B14 70 85 105 63B5 95 115 140 11 B B B B B B B B 63B14 60 75 90 56B5 80 100 10 9 BS BS BS BS BS BS BS BS B B B B 56B14 50 65 80 CM050 CM063 CM070 80B5 130 165 00 19 80B14 80 100 10 71B5 110 130 160 14 B B B B B B B 71B14 70 85 105 63B5 95 115 140 11 BS BS BS BS BS BS BS B B B B 63B14 60 75 90 90B5 130 165 00 4 90B14 95 115 140 80B5 130 165 00 19 B B B B B B B 80B14 80 100 10 71B5 110 130 160 14 BS BS BS BS BS BS BS B B B 71B14 70 85 105 63B5 95 115 140 11 BS BS BS B B 100/11B5 180 15 50 8 100/11B14 110 130 160 90B5 130 165 00 4 B B B B 90B14 95 115 140 80B5 130 165 00 19 BS BS BS BS B B B 80B14 80 100 10 71B5 110 130 160 14 BS BS BS B B B B 100/11B5 180 15 50 8 100/11B14 110 130 160 N.B. Le aree evdenzate n grgo ndcano l applcabltà della corrspondente grandezza motore. N.B. Grey areas ndcate motor nputs avalable on each sze of unt. B/BS = Boccola d rduzone n accao B/BS = Metal shaft sleeve CM075 90B5 130 165 00 4 B B B B B B 90B14 95 115 140 80B5 130 165 00 19 BS BS BS BS BS BS B B 80B14 80 100 10 71B5 110 130 160 14 BS BS B B B Nota: flange Nema dsponbl a rchesta Note: Nema flange avalable on demand G4

Motorduttor a vte senza fne Wormgearmotors CM/CMP Motor applcabl IEC Motor adapters IEC N M P D 5 7.5 10 15 0 5 30 40 50 60 80 100 100/11B5 180 15 50 8 100/11B14 110 130 160 CM090 90B5 130 165 00 4 B B B B B B B 90B14 95 115 140 P M N D 80B5 130 165 00 19 BS BS BS BS BS BS BS B B B 80B14 80 100 10 71B5 110 130 160 14 BS BS BS B CM110 13B5 30 65 300 38 13B14 130 165 00 100/11B5 180 15 50 8 B B B B B B 100/11B14 110 130 160 90B5 130 165 00 4 BS BS BS BS BS BS B B B 90B14 95 115 140 N.B. Le aree evdenzate n grgo ndcano l applcabltà della corrspondente grandezza motore. N.B. Grey areas ndcate motor nputs avalable on each sze of unt. CM130 80B5 130 165 00 19 BS BS BS B B 13B5 30 65 300 38 13B14 130 165 00 100/11B5 180 15 50 8 B B B B B B B 90B5 130 165 00 4 BS BS BS BS BS BS BS B B B B 80B5 130 165 00 19 BS BS BS BS B/BS = Boccola d rduzone n accao B/BS = Metal shaft sleeve Nota: flange Nema dsponbl a rchesta Note: Nema flange avalable on demand CM/CMP CMP IEC N M P D 60 (3x0) 75 (3x5) 90 (3x30) ( 1 x ) 10 (3x40) 056/030 056/040 56 B14 50 65 80 9 B B B B 063/040 063/050 63 B14 60 75 90 11 B B B 150 (3x50) 180 (3x60) 063/063 BS BS BS B B B 071/050 071/063 B B B 071/070 71 B14 70 85 105 14 B B B B 071/075 B B B B 071/090 BS BS BS B B B 080/063 080/070 080/075 080/090 80 B14 80 100 10 19 B B B 080/110 BS BS B B B B 40 300 (3x80) (3x100) 080/130 BS BS BS BS B B B B 090/070 090/075 090/090 90 B14 95 115 140 90 B5 130 165 00 4 B B B 090/110 BS BS B B B B 090/130 BS BS BS BS B B B B D N.B. Le aree evdenzate n grgo ndcano l applcabltà della corrspondente grandezza motore. N.B. Grey areas ndcate motor nputs avalable on each sze of unt. B/BS = Boccola d rduzone n accao B/BS = Metal shaft sleeve N M P G5

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 06 U Ø CM 06 F Ø Ø CMIS 06.. Ø Ø G6

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dmenson Dmensons CM 030 U 55 X 63 40 80 54 9 9 5.5 97 40 3 44 56 55 h8 54.5 6 4 CM/CMP 5 3 51 0 9 j6 14 H8 63 10. M4 44 30 Y 57 Ø Ø 65 75 M6x10 Kg 1. 7 6.5 Ø CM 030 F 80 6.5 45 55 X Y Archesta On request Standard S D Ø 50 H8 Ø 68 70 CMIS 030.. Ø Ø Albero lento cavo / Hollow output shaft 16.3 CMP.. Z X HX Y HX 056/030 30.5 14.1 Z G7

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 040 U Ø CMIS 040.. Ø Ø Ø CMP.. HX 056/040 30.5 139 3. 063/040 30.5 14 3.3 Z G8

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dmenson Dmensons CM 040 F CMP../040 F Ø Ø CM 040 FB CMP../040 FB CM/CMP Ø Ø CM 040 FL CMP../040 FL Ø Ø G9

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 050 U Ø CMIS 050.. Ø Ø Ø CMP.. HX 063/050 30.5 15 4.5 071/050 41 169 5.5 Z G30

Dmenson Motorduttor a vte senza fne Wormgearmotors CM/CMP Dmensons CM 050 F CMP../050 F Ø Ø CM 050 FB CMP../050 FB CM/CMP Ø Ø CM 050 FL CMP../050 FL Ø Ø G31

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 063 U 98 144 11 7 X 53 53 100 45 8 Kg 6. 94.5 40 36 36 8 19 j6 6 5 H8 7 50 8.5 174 80 h8 10 80 63 Y M8x14 67 Ø 95 85 Ø 110 104 CMIS 063.. M6 1.5 Ø Ø Ø 11 8.3 Albero lento cavo / Hollow output shaft CMP.. Z X HX Y HX 063/063 30.5 170 7. 071/063 41 187 8. 080/063 41 198 9.0 Z G3

Dmenson Motorduttor a vte senza fne Wormgearmotors CM/CMP Dmensons CM 063 F CMP../063 F Ø Ø CM 063 FB CMP../063 FB CM/CMP Ø Ø CM 063 FL CMP../063 FL Ø Ø G33

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 070 U 108 X 160 10 80 57 57 110 45 9 Ø Kg 7.5 Ø Ø CM 070 F 108 X 107 111 14 13 6 45 S Standard D Ø 130 H8 170 Ø 165-180 CMIS 070.. 105 50 40 40 8 8 Ø 8 H8 Y 80 55 9 Y 195 115 91 70 95 h8 M8x14 64 115 90 130 104 00 A rchesta On request 4 j6 M8 7 Ø 10 31.3 CMP.. Z X Albero lento cavo / Hollow output shaft HX Y HX 071/070 41 197 9 080/070 41 08 9.8 090/070 36.5 6 10.5 Z G34

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dmenson Dmensons CM 075 U 113 X 17 10 86 57 57 10 45 10 Kg 9.0 14 113 X 111 13 6 CM/CMP 45 A rchesta On request S Standard D Ø130 H8 170 Ø165-180 110 50 40 40 8 4 j6 8 8 H8 Y Y 05 119 93 75 95 h8 M8x14 86 60 11 7 Ø Ø115 90 Ø140 11 CM 075 F 00 CMIS 075.. Ø M8 7 Ø 10 31.3 CMP.. Z X Albero lento cavo / Hollow output shaft HX Y HX 071/075 41 0 11.0 080/075 41 13 11.8 090/075 36.5 67 1.5 Z G35

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 090 U 130 X 08 140 103 67 67 140 45 11 Kg 38 135 103 10 70 90 13 110h8 Ø 13 130 X 111 14 13 6 45 Archesta On request S Ø15 H8 00 Ø175-190 17 50 45 45 10 8 35 H8 Y Y M10x18 74 Ø130 100 Ø160 130 CM 090 F 10 Standard D CMIS 090.. 4 j6 M8 7 Ø Ø 140 38.3 CMP.. Z X Albero lento cavo /Hollow output shaft HX Y HX 071/090 41 19 15.0 080/090 41 30 15.8 090/090 36.5 84 16.5 Z G36

Motorduttor a vte senza fne Wormgearmotors CM/CMP Dmenson Dmensons CM 110 U Ø Ø CM 110 F CM/CMP Ø Ø CMIS 110.. Ø Ø Ø CMP.. HX 080/110 41 60 3.8 090/110 36.5 314 4.5 Z G37

CM/CMP Motorduttor a vte senza fne Wormgearmotors Dmenson Dmensons CM 130 U CM 130 F Ø Ø Ø Ø Ø Ø CMP.. HX 080/130 41 80 47.8 090/130 36.5 334 48.5 Z G38

Motorduttor a vte senza fne Wormgearmotors CM/CMP Accessor Albero lento semplce e doppo Accessores Sngle and double output shaft B1 L1 G1 B1 CM 030-130 CMP../030 -../130 G1 L B1 CM 030-130 CMP../030 -../130 B B f b1 B f b1 DZ SZ CM CMP d h7 B B1 G1 L L1 f b1 t1 030 056/030 14 30 3.5 63 10 18 M6 5 16 d t1 d t1 CM 06 040 056/040 063/040 18 40 43 78 18 164 M6 6 0.5 M5x10 49 79 30 5 M5x10 4 050 063/050 071/050 5 50 53.5 9 153 199 M10 8 8 063 063/063 071/063 080/063 5 50 53.5 11 173 19 M10 8 8 18 g6 1 13.5 070 075 071/070 080/070 090/070 071/075 080/075 090/075 8 60 63.5 10 19 47 M10 8 31 8 60 63.5 10 19 47 M10 8 31 CM/CMP 090 071/090 080/090 090/090 35 80 84.5 140 34 309 M1 10 38 110 080/110 090/110 4 80 84.5 155 49 34 M16 1 45 130 080/130 090/130 45 80 85 170 65 340 M16 14 48.5 Bracco d reazone Torque arm CM CMP K1 G KG KH R 030 056/030 85 14 3 8 15 040 056/040 063/040 100 14 31 10 18 050 063/050 071/050 100 14 38 10 18 063 070 075 063/063 071/063 080/063 071/070 080/070 090/070 071/075 080/075 090/075 150 14 47.5 10 18 00 5 46.5 0 30 00 5 46.5 0 30 K1 R KG G KH 090 071/090 080/090 090/090 00 5 56.5 0 30 110 080/110 090/110 50 30 6 5 35 130 080/130 090/130 50 30 69 5 35 G39

CM/CMP Motorduttor a vte senza fne Wormgearmotors SC - Safety Cover CM CMP M 030 056/030 47 040 056/040 063/040 54.5 M 050 063/050 071/050 6.5 063 063/063 071/063 080/063 73 070 071/070 080/070 090/070 75 075 071/075 080/075 090/075 79 090 071/090 080/090 090/090 94 110 080/110 090/110 10 130 080/130 090/130 117 Opzon Optons VS - Vte sporgente / Extended nput shaft CM CMP A B D 1 j6 E F G 030 056/030 45 0 9 M4 3 10. B A 040 050 056/040 063/040 063/050 071/050 53 3 11 M5 4 1.5 64 30 14 M6 5 16 F D1 j6 063 063/063 071/063 080/063 75 40 19 M6 6 1.5 G E 070 071/070 080/070 090/070 84 40 19 M6 6 1.5 075 071/075 080/075 090/075 90 50 4 M8 8 7 090 071/090 080/090 090/090 108 50 4 M8 8 7 110 080/110 090/110 135 60 8 M10 8 31 130 080/130 090/130 Costruto su rchesta Bult on request G40

CMM CMM CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors

Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM Pag. Page Indce Index Caratterstche tecnche Techncal features H Desgnazone Clascaton H Esecuzon d montaggo Mountng executons H3 Smbologa Symbols H3 Combnazon rapport Combnaton rato H3 Lubrfcazone Lubrcaton H4 Dat tecnc Techncal data H5 Motor applcabl IEC Motor adapters H10 Dmenson Dmensons H1 Accessor Accessores H16 Opzon Optons H16 CMM Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0317A H1

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Caratterstche tecnche Techncal features I motorduttor combnat a vte senza fne della sere CMM hanno le seguent caratterstche prncpal : Carcassa n allumno nelle grandezze 06, 030, 040, 050, 063, 070, 075, 090 e 110. La grandezza 130 è costruta con carcassa n ghsa; Le grandezze 090, 110 e 130 sono fornte con cuscnett a rull conc sulla vte; Lubrfcazone permanente con olo sntetco. CMM double reducton worm gearmotors range have the followng man features: De-cast alumnum housng on szes 06, 030, 040, 050, 063, 070, 075, 090 and 110. Cast ron housng on sze 130; Double taper roller bearng on szes 090, 110 and 130; Permanent synthetc ol long-lfe lubrcaton. Desgnazone Clascaton RIDUTTORE / GEARBOX CMM 030/063 FD 0 71 B5 SZDX BRSX 90 M1 US1 VS Tpo Type Grandezza Sze Versone Verson Rapporto Rato IEC Forma costruttva Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle Pos. d montaggo Mountng poston Esecuzone d montaggo Mountng executon Opzon Optons CMM CMMIS 06/06 06/030 06/040 06/050 030/040 030/050 030/063 040/063 040/070 040/075 040/090 050/110 063/130 U FD FS FBD FBS FLD FLS ved tabellesee tables 56.. 90.. B5 B14 SZDX SZSX DZ BRDX BRSX 0 90 180 70 M1 (B3) M (V6) M3 (B8) M4 (V5) M6 (B6) M5 (B7) UB1 UB US1 US UV1 UV UC1 UC VS1 VS Versone Rduttore Gearbox Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle 90 90 U FD FLD FBD FS FLS FBS SZDX SZSX DZ BRDX BRSX 180 70 70 0 MOTORE CM / CM MOTOR 0.5kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. Ved tabelle See tables p 4p 6p 8p 1ph 3ph 30V 30/400V 50Hz 60Hz H

Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM Esecuzon d montaggo Mountng executons UB1 UB US1 US UV1 UV UC1 UC Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed M Coppa n uscta n funzone d P 1 / Output torque referred to P 1 n [mn -1 ] Veloctà n uscta / Output speed Fattore d servzo / Servce factor Rapporto d rduzone / Rato R [N] Carco radale ammssble n uscta / Permtted output radal load P 1 Potenza n entrata / Input power A [N] Carco assale ammssble n uscta / Permtted output axal load Combnazon rapport Combnaton rato CMM CMM 06/06 - CMM 06/030 - CMM 06/040 - CMM 06/050 ( 1 x ) 150 5 300 450 600 900 100 1500 1800 400 3000 3600 1 10 15 10 15 0 30 40 50 60 60 60 60 15 15 30 30 30 30 30 30 30 40 50 60 CMM 030/040 - CMM 030/050 - CMM 030/063 - CMM 040/063 - CMM 040/070 - CMM 040/075 - CMM 040/090 - CMM 050/110 - CMM 063/130 ( 1 x ) 75 100 150 00 50 300 400 500 600 750 900 100 1500 1800 400 3000 1 7.5 10 10 10 10 10 10 10 0 5 30 40 50 60 60 60 10 10 15 0 5 30 40 50 30 30 30 30 30 30 40 50 H3

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Lubrfcazone Tutt motorduttor nelle tagle 6, 30, 40, 50, 63, 70, 75, 90, 110 sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d monatggo e non necesstano d manutenzone. Per la tagla 130 la lubrfcazone dpende dalla poszone d montaggo Lubrcaton Permanent synthetc ol long-lfe lubrcaton (vscosty grade 30) makes t possble to use the gearmotors sze 6, 30, 40, 50, 63, 70, 75, 90, 110 n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. Only for sze 130, the lubrcaton depended of mountng postons Quanttà d olo (ltr) / Ol quantty (ltres) M1 (B3) M3 (B8) M6 (B6) M5 (B7) M4 (V5) M (V6) CM130 4.5 3.3 3.5 3.5 4.5 3.3 Lubrfcato a vta Lfe lubrcaton Poszon d montaggo / Mountng postons (1) (1) M1 (B3) M3 (B8) M6 (B6) M5 (B7) M4 (V5) M (V6) (standard) (1): Tappo n poszone posterore / Plug n backsde poston Sfato e tappo d rempmento / Breather and fllng plug Lvello olo / Ol level plug Tappo d scarco / Ol dran plug H4

Dat tecnc Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.06 56A4 (1400 mn -1 ) 9.3 33 0.8 150 CMM B14 6. 33 0.8 5 06/06 B14 4.7 34 0.8 300 B14 3.1 34 0.8 450 B14.3 34 0.8 600 B14 1.6 34 0.8 900 B14 1. 34 0.8 100 B14 0.9 34 0.8 1500 B14 0.8 34 0.8 1800 B14 0.6 8 0.8 400 B14 0.5 5 0.8 3000 B14 0.4 3 0.8 3600 B14 9.3 34 1.1 150 CMM B14 6. 48 0.8 5 06/030 B14 4.7 50 0.8 300 B14 3.1 50 0.8 450 B14.3 50 0.8 600 B14 1.6 50 0.8 900 B14 1. 50 0.8 100 B14 0.93 50 0.8 1500 B14 0.78 50 0.8 1800 B14 0.58 43 0.8 400 B14 0.47 38 0.8 3000 B14 0.39 34 0.8 3600 B14 9.3 35.5 150 CMM B14 6. 50 1.8 5 06/040 B14 4.7 58 1.5 300 B14 3.1 8 1.1 450 B14.3 104 0.9 600 B14 1.6 113 0.8 900 B14 1. 113 0.8 100 B14 0.93 113 0.8 1500 B14 0.78 113 0.8 1800 B14 0.58 93 0.8 400 B14 0.47 85 0.8 3000 B14 0.39 78 0.8 3600 B14 9.3 37 4.4 150 CMM B14 6. 5 3.1 5 06/050 B14 4.7 59.7 300 B14 3.1 83 1.9 450 B14.3 105 1.5 600 B14 1.6 141 1.1 900 B14 1. 174 0.9 100 B14 0.93 03 0.8 1500 B14 0.78 03 0.8 1800 B14 0.58 169 0.8 400 B14 0.47 156 0.8 3000 B14 0.39 141 0.8 3600 B14 9.3 36.4 150 CMM B5/B14 7.0 46 1.6 00 030/040 B5/B14 5.6 55 1. 50 B5/B14 4.7 59 1.5 300 B5/B14 3.5 7 1.0 400 B5/B14.8 81 0.8 500 B5/B14.3 105 0.9 600 B5/B14 1.9 113 0.8 750 B5/B14 1.6 113 0.8 900 B5/B14 1. 113 0.8 100 B5/B14 0.93 113 0.8 1500 B5/B14 0.78 113 0.8 1800 B5/B14 0.58 93 0.8 400 B5/B14 0.47 85 0.8 3000 B5/B14 0.06 56A4 3.5 73 1.9 400 CMM B5/B14 (1400 mn -1 ).8 83 1.5 500 030/050 B5/B14.3 107 1.5 600 B5/B14 1.9 18 1.3 750 B5/B14 1.6 143 1.1 900 B5/B14 1. 03 0.8 100 B5/B14 0.93 03 0.8 1500 B5/B14 0.78 03 0.8 1800 B5/B14 0.58 169 0.8 400 B5/B14 0.47 156 0.8 3000 B5/B14 0.09 56B4 (1400 mn -1 ).8 86.7 500 CMM B5/B14.3 111.8 600 030/063 B5/B14 1.9 133.3 750 B5/B14 1.6 148.1 900 B5/B14 1. 183 1.7 100 B5/B14 0.93 14 1.5 1500 B5/B14 0.78 43 1.3 1800 B5/B14 0.58 9 0.9 400 B5/B14 0.47 90 0.8 3000 B5/B14.8 86.7 500 CMM B5/B14.3 115.7 600 040/063 B5/B14 1.9 136.3 750 B5/B14 1.6 155.0 900 B5/B14 1. 19 1.6 100 B5/B14 0.93 1 1.4 1500 B5/B14 0.78 56 1. 1800 B5/B14 0.58 308 0.8 400 B5/B14 0.47 90 0.8 3000 B5/B14 1.17 17.6 100 CMM B5/B14 0.93 1.0 1500 040/070 B5/B14 0.78 56 1.8 1800 B5/B14 0.58 308 1. 400 B5/B14 0.47 356 0.9 3000 B5/B14 0.93 1.5 1500 CMM B5/B14 0.78 56.1 1800 040/075 B5/B14 0.58 313 1.5 400 B5/B14 0.47 356 1.1 3000 B5/B14 0.58 330.5 400 CMM B5/B14 0.47 385 1.8 3000 040/090 B5/B14 9.3 53 1.6 150 CMM B14 6. 74 1. 5 06/040 B14 4.7 87 1.0 300 B14 9.3 55.9 150 CMM B14 6. 78.1 5 06/050 B14 4.7 89 1.8 300 B14 3.1 15 1.3 450 B14.3 158 1.0 600 B14 19 9.9 75 CMM B5/B14 14 39. 100 030/040 B5/B14 9.3 53 1.6 150 B5/B14 7.0 69 1.1 00 B5/B14 4.7 88 1.0 300 B5/B14 Verfcare sempre che la coppa M utlzzata non ecceda l valore ndcato nelle caselle n grgo. Please check that the output torque M does not exceed the value n the grey areas. CMM H5

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.09 56B4 19 30 5. 75 CMM B5/B14 (1400 mn -1 ) 14 39 4.0 100 030/050 B5/B14 9.3 56.9 150 B5/B14 7.0 70.0 00 B5/B14 5.6 83 1.5 50 B5/B14 4.7 90 1.8 300 B5/B14 3.5 109 1. 400 B5/B14.8 14 1.0 500 B5/B14.3 160 1.0 600 B5/B14 1.9 19 0.8 750 B5/B14 7.0 69 3.8 00 CMM B5/B14 5.6 81.8 50 030/063 B5/B14 4.7 93 3.3 300 B5/B14 3.5 111.3 400 B5/B14.8 19 1.8 500 B5/B14.3 166 1.9 600 B5/B14 1.9 199 1.6 750 B5/B14 1.6 1.4 900 B5/B14 1. 74 1.1 100 B5/B14 0.93 30 1.0 1500 B5/B14 0.78 365 0.9 1800 B5/B14 7.0 69 3.8 00 CMM B5/B14 5.6 81.8 50 040/063 B5/B14 4.7 93 3.3 300 B5/B14 3.5 111.3 400 B5/B14.8 19 1.8 500 B5/B14.3 17 1.8 600 B5/B14 1.9 04 1.5 750 B5/B14 1.6 3 1.3 900 B5/B14 1. 87 1.1 100 B5/B14 0.93 30 1.0 1500 B5/B14 0.78 385 0.8 1800 B5/B14.8 19.6 500 CMM B5/B14.3 17.6 600 040/070 B5/B14 1.9 04. 750 B5/B14 1.6 3.0 900 B5/B14 1. 59 1.8 100 B5/B14 0.93 33 1.4 1500 B5/B14 0.78 385 1. 1800 B5/B14 1.6 3.4 900 CMM B5/B14 1. 87 1.9 100 040/075 B5/B14 0.93 33 1.6 1500 B5/B14 0.78 385 1.4 1800 B5/B14 0.58 470 1.0 400 B5/B14 1. 30 3.1 100 CMM B5/B14 0.93 348.7 1500 040/090 B5/B14 0.78 404.3 1800 B5/B14 0.58 496 1.6 400 B5/B14 0.47 577 1. 3000 B5/B14 0.1 63A4 (1400 mn -1 ) 19 39.1 75 CMM B5/B14 14 5 1.6 100 030/040 B5/B14 9.3 71 1. 150 B5/B14 7.0 9 0.8 00 B5/B14 19 40 3.9 75 CMM B5/B14 14 5 3.0 100 030/050 B5/B14 9.3 74. 150 B5/B14 7.0 94 1.5 00 B5/B14 5.6 110 1.1 50 B5/B14 4.7 10 1.4 300 B5/B14 3.5 146 0.9 400 B5/B14 7.0 9.8 00 CMM B5/B14 5.6 108.1 50 030/063 B5/B14 4.7 14.5 300 B5/B14 3.5 149 1.8 400 B5/B14.8 17 1.3 500 B5/B14.3 1 1.4 600 B5/B14 1.9 65 1. 750 B5/B14 1.6 96 1.0 900 B5/B14 1. 365 0.8 100 B5/B14 7.0 9.8 00 CMM B5/B14 5.6 108.1 50 040/063 B5/B14 4.7 14.5 300 B5/B14 3.5 149 1.8 400 B5/B14.8 17 1.3 500 B5/B14.3 30 1.3 600 B5/B14 1.9 73 1.1 750 B5/B14 1.6 309 1.0 900 B5/B14 1. 383 0.8 100 B5/B14 3.5 149.6 400 CMM B5/B14.8 17.0 500 040/070 B5/B14.3 30.0 600 B5/B14 1.9 73 1.7 750 B5/B14 1.6 309 1.5 900 B5/B14 1. 383 1. 100 B5/B14 0.93 44 1.0 1500 B5/B14 0.78 513 0.9 1800 B5/B14.8 17.3 500 CMM B5/B14.3 30.4 600 040/075 B5/B14 1.9 73.0 750 B5/B14 1.6 309 1.8 900 B5/B14 1. 383 1.4 100 B5/B14 0.93 44 1. 1500 B5/B14 0.78 513 1.1 1800 B5/B14 1.6 35.9 900 CMM B5/B14 1. 40.3 100 040/090 B5/B14 0.93 464.0 1500 B5/B14 0.78 538 1.8 1800 B5/B14 0.58 661 1. 400 B5/B14 0.47 769 0.9 3000 B5/B14 0.78 566.8 1800 CMM B5/B14 0.58 719.0 400 050/110 B5/B14 0.47 855 1.5 3000 B5/B14 H6

Dat tecnc Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.18 63B4 (1400 mn -1 ) 19 59 1.4 75 CMM B5/B14 14 77 1.1 100 030/040 B5/B14 9.3 107 0.8 150 B5/B14 19 59.6 75 CMM B5/B14 14 78.0 100 030/050 B5/B14 9.3 111 1.4 150 B5/B14 7.0 140 1.0 00 B5/B14 5.6 165 0.7 50 B5/B14 4.7 179 0.9 300 B5/B14 19 60 4.8 75 CMM B5/B14 14 79 3.6 100 030/063 B5/B14 9.3 110.8 150 B5/B14 7.0 138 1.9 00 B5/B14 5.6 16 1.4 50 B5/B14 4.7 186 1.7 300 B5/B14 3.5 3 1. 400 B5/B14.8 58 0.9 500 B5/B14.3 33 0.9 600 B5/B14 19 61 4.7 75 CMM B5/B14 14 79 3.6 100 040/063 B5/B14 9.3 110.8 150 B5/B14 7.0 138 1.9 00 B5/B14 5.6 16 1.4 50 B5/B14 4.7 186 1.7 300 B5/B14 3.5 3 1. 400 B5/B14.8 58 0.9 500 B5/B14.3 345 0.9 600 B5/B14 7.0 140.8 00 CMM B5/B14 5.6 168.0 50 040/070 B5/B14 4.7 186.4 300 B5/B14 3.5 3 1.7 400 B5/B14.8 58 1.3 500 B5/B14.3 345 1.3 600 B5/B14 1.9 409 1.1 750 B5/B14 1.6 464 1.0 900 B5/B14 0. 63C4 (1400 mn -1 ) 19 7 1. 75 CMM B5/B14 14 95 0.9 100 030/040 B5/B14 19 73.1 75 CMM B5/B14 14 96 1.6 100 030/050 B5/B14 9.3 136 1. 150 B5/B14 7.0 171 0.8 00 B5/B14 19 74 3.9 75 CMM B5/B14 14 97 3.0 100 030/063 B5/B14 9.3 134.3 150 B5/B14 7.0 169 1.5 00 B5/B14 5.6 199 1. 50 B5/B14 4.7 7 1.4 300 B5/B14 3.5 7 1.0 400 B5/B14 19 75 3.9 75 CMM B5/B14 14 97 3.0 100 040/063 B5/B14 9.3 134.3 150 B5/B14 7.0 169 1.5 00 B5/B14 5.6 199 1. 50 B5/B14 4.7 7 1.4 300 B5/B14 3.5 7 1.0 400 B5/B14 7.0 171.3 00 CMM B5/B14 5.6 05 1.7 50 040/070 B5/B14 4.7 7.0 300 B5/B14 3.5 7 1.4 400 B5/B14.8 315 1.1 500 B5/B14.3 41 1.1 600 B5/B14 1.9 500 0.9 750 B5/B14 5.6 05.0 50 CMM B5/B14 4.7 7.4 300 040/075 B5/B14 3.5 77 1.7 400 B5/B14.8 315 1.3 500 B5/B14.3 41 1.3 600 B5/B14 1.9 500 1.1 750 B5/B14 1.6 567 1.0 900 B5/B14 CMM 5.6 168.4 50 CMM B5/B14 4.7 186.9 300 040/075 B5/B14 3.5 7.1 400 B5/B14.8 58 1.6 500 B5/B14.3 345 1.6 600 B5/B14 1.9 409 1.3 750 B5/B14 1.6 464 1. 900 B5/B14 1. 575 1.0 100 B5/B14 3.5 9.8 400 CMM B5/B14.8 340.0 500 040/090 B5/B14.3 44.1 600 B5/B14 1.9 55 1.8 750 B5/B14 1.6 596 1.6 900 B5/B14 1. 737 1.3 100 B5/B14 0.93 851 1.1 1500 B5/B14 0.78 987 1.0 1800 B5/B14.8 78.5 500 CMM B5/B14.3 36.6 600 040/090 B5/B14 1.9 49. 750 B5/B14 1.6 487 1.9 900 B5/B14 1. 603 1.6 100 B5/B14 0.93 696 1.4 1500 B5/B14 0.78 808 1. 1800 B5/B14 1. 63.5 100 CMM B5/B14 0.93 743.1 1500 050/110 B5/B14 0.78 849 1.9 1800 B5/B14 0.58 1079 1.3 400 B5/B14 0.47 18 1.0 3000 B5/B14 1.9 547.9 750 CMM B5/B14 1.6 6.6 900 050/110 B5/B14 1. 791 1.8 100 B5/B14 0.93 908 1.8 1500 B5/B14 0.78 1037 1.5 1800 B5/B14 0.58 1318 1.1 400 B5/B14 1. 83.5 100 CMM B5/B14 0.93 981.1 1500 063/130 B5/B14 0.78 113 1.8 1800 B5/B14 0.58 1430 1.3 400 B5/B14 0.47 1730 0.9 3000 B5/B14 0.93 80.6 1500 CMM B5/B14 0.78 919. 1800 063/110 B5/B14 0.58 1170 1.6 400 B5/B14 0.47 1416 1.1 3000 B5/B14 H7

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 71A4 19 85 3.4 75 CMM B5/B14 (1400 mn -1 ) 14 110.6 100 040/063 B5/B14 9.3 153.0 150 B5/B14 7.0 19 1.4 00 B5/B14 5.6 6 1.0 50 B5/B14 4.7 58 1. 300 B5/B14 3.5 309 0.8 400 B5/B14 19 86 4.9 75 CMM B5/B14 14 11 3.7 100 040/070 B5/B14 9.3 155.8 150 B5/B14 7.0 195.0 00 B5/B14 5.6 33 1.5 50 B5/B14 4.7 58 1.8 300 B5/B14 3.5 309 1. 400 B5/B14.8 358 0.9 500 B5/B14.3 479 0.9 600 B5/B14 7.0 198.4 00 CMM B5/B14 5.6 33 1.8 50 040/075 B5/B14 4.7 58.1 300 B5/B14 3.5 315 1.5 400 B5/B14.8 358 1.1 500 B5/B14.3 479 1.1 600 B5/B14 1.9 568 1.0 750 B5/B14 1.6 645 0.8 900 B5/B14 5.6 47.9 50 CMM B5/B14 4.7 71 3.5 300 040/090 B5/B14 3.5 33.4 400 B5/B14.8 387 1.8 500 B5/B14.3 503 1.9 600 B5/B14 1.9 596 1.6 750 B5/B14 1.6 677 1.4 900 B5/B14 1. 838 1.1 100 B5/B14 0.93 967 1.0 1500 B5/B14.8 40 3.0 500 CMM B5/B14.3 517 3.1 600 050/110 B5/B14 1.9 6.6 750 B5/B14 1.6 707.3 900 B5/B14 1. 878 1.8 100 B5/B14 0.93 1031 1.5 1500 B5/B14 0.78 1179 1.4 1800 B5/B14 0.58 1498 1.0 400 B5/B14 1. 945. 100 CMM B5/B14 0.93 1114 1.9 1500 063/130 B5/B14 0.78 176 1.6 1800 B5/B14 0.58 164 1.1 400 B5/B14 0.47 1966 0.8 3000 B5/B14 0.37 71B4 19 15.3 75 CMM B5/B14 (1400 mn -1 14 163 1.8 100 040/063 B5/B14 9.3 6 1.3 150 B5/B14 7.0 84 0.9 00 B5/B14 19 17 3.3 75 CMM B5/B14 14 165.5 100 040/070 B5/B14 9.3 9 1.9 150 B5/B14 7.0 88 1.4 00 B5/B14 5.6 345 1.0 50 B5/B14 4.7 38 1. 300 B5/B14 9.3 3.3 150 CMM B5/B14 7.0 93 1.6 00 040/075 B5/B14 5.6 345 1. 50 B5/B14 4.7 38 1.4 300 B5/B14 3.5 466 1.0 400 B5/B14 7.0 305.6 00 CMM B5/B14 5.6 366 1.9 50 040/090 B5/B14 4.7 401.4 300 B5/B14 3.5 49 1.7 400 B5/B14.8 57 1. 500 B5/B14.3 744 1.3 600 B5/B14 1.9 88 1.1 750 B5/B14 1.6 100 0.9 900 B5/B14 5.6 386 3.3 50 CMM B5/B14 4.7 41 3.9 300 050/110 B5/B14 3.5 53.8 400 B5/B14.8 6.0 500 B5/B14.3 766.1 600 B5/B14 1.9 91 1.7 750 B5/B14 1.6 1047 1.5 900 B5/B14 1. 199 1. 100 B5/B14 0.93 156 1.0 1500 B5/B14 0.78 1745 0.9 1800 B5/B14 1.9 974.1 750 CMM B5/B14 1.6 114 1.8 900 063/130 B5/B14 1. 1399 1.5 100 B5/B14 0.93 1649 1.3 1500 B5/B14 0.78 1889 1.1 1800 B5/B14 0.55 71C4 19 186 1.5 75 CMM B5/B14 (1400 mn -1 ) 14 43 1. 100 040/063 B5/B14 9.3 336 0.9 150 B5/B14 19 189. 75 CMM B5/B14 14 46 1.7 100 040/070 B5/B14 9.3 340 1.3 150 B5/B14 7.0 49 0.9 00 B5/B14 19 189.7 75 CMM B5/B14 14 46.0 100 040/075 B5/B14 9.3 345 1.5 150 B5/B14 7.0 435 1.1 00 B5/B14 4.7 567 1.0 300 B5/B14 9.3 355.5 150 CMM B5/B14 7.0 454 1.8 00 040/090 B5/B14 5.6 544 1.3 50 B5/B14 4.7 596 1.6 300 B5/B14 3.5 731 1.1 400 B5/B14.3 1106 0.9 600 B5/B14 H8

Dat tecnc Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 71C4 7.0 47 3.0 00 CMM B5/B14 (1400 mn -1 ) 5.6 574.3 50 050/110 B5/B14 4.7 61.6 300 B5/B14 3.5 778 1.9 400 B5/B14.8 95 1.4 500 B5/B14.3 1138 1.4 600 B5/B14 1.9 1369 1. 750 B5/B14 1.6 1556 1.0 900 B5/B14 3.5 813. 400 CMM B5/B14.8 984 1.6 500 063/130 B5/B14.3 103 1.7 600 B5/B14 1.9 1449 1.4 750 B5/B14 1.6 1671 1. 900 B5/B14 1. 080 1.0 100 B5/B14 80A4 19 198 6.7 75 CMM B5/B14 (1400 mn -1 ) 14 58 5. 100 050/110 B5/B14 9.3 364 4.1 150 B5/B14 7.0 47 3.0 00 B5/B14 5.6 574.3 50 B5/B14 4.7 61.6 300 B5/B14 3.5 778 1.9 400 B5/B14.8 95 1.4 500 B5/B14.3 1138 1.4 600 B5/B14 1.9 1369 1. 750 B5/B14 1.6 1556 1.0 900 B5/B14 0.75 80B4 (1400 mn -1 ) 3.5 813. 400 CMM B5/B14.8 984 1.6 500 063/130 B5/B14.3 103 1.7 600 B5/B14 1.9 1449 1.4 750 B5/B14 1.6 1671 1. 900 B5/B14 1. 080 1.0 100 B5/B14 19 70 4.9 75 CMM B5/B14 14 35 3.8 100 050/110 B5/B14 9.3 496 3.0 150 B5/B14 7.0 644. 00 B5/B14 5.6 783 1.7 50 B5/B14 4.7 835 1.9 300 B5/B14 3.5 1061 1.4 400 B5/B14.8 161 1.0 500 B5/B14.3 155 1.0 600 B5/B14 1.9 1866 0.9 750 B5/B14 1.1 80C4 (1400 mn -1 ) 90S4 (1400 mn -1 ) 1.5 90L4 (1400 mn -1 ) 1.85 90LB4 (1400 mn -1 ) 19 397 3.4 75 CMM B5/B14 14 517.6 100 050/110 B5/B14 9.3 77.0 150 B5/B14 7.0 944 1.5 00 B5/B14 5.6 1148 1.1 50 B5/B14 4.7 15 1.3 300 B5/B14 3.5 1556 0.9 400 B5/B14 7.0 968 1.9 00 CMM B5/B14 5.6 1178 1.4 50 063/130 B5/B14 4.7 178 1.6 300 B5/B14 3.5 166 1.1 400 B5/B14.3 407 0.9 600 B5/B14 19 406 4.1 75 CMM B5/B14 14 59 3. 100 063/130 B5/B14 9.3 745.6 150 B5/B14 7.0 968 1.9 00 B5/B14 5.6 1178 1.4 50 B5/B14 4.7 178 1.6 300 B5/B14 3.5 166 1.1 400 B5/B14.3 407 0.9 600 B5/B14 19 554 3.0 75 CMM B5/B14 14 7.3 100 063/130 B5/B14 9.3 1016 1.9 150 B5/B14 7.0 130 1.4 00 B5/B14 5.6 1606 1.0 50 B5/B14 4.7 174 1. 300 B5/B14 19 683.5 75 CMM B5/B14 14 890 1.9 100 063/130 B5/B14 9.3 154 1.5 150 B5/B14 7.0 168 1.1 00 B5/B14 4.7 149 1.0 300 B5/B14 CMM 7.0 660.7 00 CMM B5/B14 5.6 803.0 50 063/130 B5/B14 4.7 871.4 300 B5/B14 3.5 1109 1.6 400 B5/B14.8 134 1. 500 B5/B14.3 1641 1.3 600 B5/B14 1.9 1975 1.0 750 B5/B14 1.6 79 0.9 900 B5/B14 H9

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Motor applcabl IEC Motor adapters P M N D N.B. Le aree evdenzate n grgo ndcano l applcabltà della corrspondente grandezza motore. Grey areas ndcate motor nputs avalable on each sze of unt. B/BS = Boccola d rduzone n accao B/BS = Metal shaft sleeve US1 US UV1 UV CMM IEC N M P D 06/06 56B14 50 65 80 9 1 10 15 0 30 40 50 60 UB1 UB US1 US UV1 UV CMM IEC N M P D 06/030 06/040 06/050 56B14 50 65 80 9 1 10 15 0 30 40 50 60 H10

Motor applcabl Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM IEC Motor adapters UB1 UB US1 US UV1 UV CMM IEC N M P D 1 7.5 10 15 0 5 30 40 50 60 63B5 95 115 140 030/040 11 63B14 60 75 90 030/050 56B5 80 100 10 030/063 9 B B B B B B B B 56B14 50 65 80 040/063 71B5 110 130 160 71B14 70 85 105 14 040/070 63B5 95 115 140 040/075 63B14 60 75 90 11 B B B B B B B 040/090 56B5 80 100 10 56B14 50 65 80 9 BS BS BS BS BS BS BS B B 80B5 130 165 00 80B14 80 100 10 19 050/110 71B5 110 130 160 71B14 70 85 105 14 B B B B B B 63B5 95 115 140 63B14 60 75 90 11 BS BS BS BS BS BS B B B 90B5 130 165 00 90B14 95 115 140 4 063/130 80B5 130 165 00 80B14 80 100 10 19 B B B B B B 71B5 110 130 160 71B14 70 85 105 14 BS BS BS BS BS BS B B B 63B5 95 115 140 11 BS BS BS CMM UC1 UC CMM IEC N M P D 1 7.5 10 15 0 5 30 40 50 60 63B14 60 75 90 11 030/040 56B5 80 100 10 030/050 9 B B B B B B B B 56B14 50 65 80 030/063 63B5 95 115 140 63B14 60 75 90 11 56B5 80 100 10 56B14 50 65 80 9 B B B B B B B 040/063 71B5 110 130 160 71B14 70 85 105 14 040/070 63B5 95 115 140 040/075 63B14 60 75 90 11 B B B B B B B 040/090 56B5 80 100 10 56B14 50 65 80 9 BS BS BS BS BS BS BS B B 80B14 80 100 10 19 050/110 71B5 110 130 160 71B14 70 85 105 14 B B B B B B 63B5 95 115 140 63B14 60 75 90 11 BS BS BS BS BS BS B B B 90B14 95 115 140 4 80B14 80 100 10 19 B B B B B B 063/130 71B5 110 130 160 71B14 70 85 105 14 BS BS BS BS BS BS B B B 63B5 95 115 140 11 BS BS BS H11

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Dmenson Dmensons CMM..U - CMM..F - CMM..FB - CMM..FL A C D H8 E F G G1 H H1 I I1 K L M N h8 N1 N 06/06 45 70 1 83 47.5 50 35 34 6 6 34 4 55 45.5 1 06/030 54 80 14 97 3 47.5 63 40 34 30 6 44 56 65 55 9 1 06/040 70 100 18 11.5 43 47.5 78 50 34 40 6 60 71 75 60 36.5 1 06/050 80 10 5 144 49 47.5 9 60 34 50 6 70 85 85 70 43.5 1 CMM..U - CMM..F - CMM..FB - CMM..FL O P Q R R1 S T V Z KE a b t Kg 06/06 6 37 49 49 5 15 1 76 7 4 13.8 1.6 06/030 6.5 75 44 57 49 5.5 7 81 M6x10(n.4) 90 5 16.3.4 06/040 6.5 87 55 71.5 49 6.5 6 35 91.5 M6x8(n.4) 45 6 0.8 3.5 06/050 8.5 98 64 84 49 7 30 40 100.5 M8x10(n.4) 45 8 8.3 5.0 CMM..F CMM..FB CMM..FL a1 KA KB KC KM KN H8 KO KP KQ KA KB KC KM KN H8 KO KP KQ KA KB KC KM KN H8 KO KP KQ 06/06 45 45 6 4.5 55-69 40 6.5(n.4) 75 70 06/030 45 54.5 6 4 68 50 6.5(n.4) 80 70 06/040 45 67 7.5 4.5 80-95 60 9(n.4) 110 95 80 8.5 5 115-15 95 9.5(n.4) 140 11 97 7.5 4.5 80-95 60 9(n.4) 110 95 06/050 45 90 9 5 90-110 70 11(n.4) 15 110 89 9 5 130-145 110 9.5(n.4) 160 13 10 9 5 90-110 70 11(n.4) 15 110 CMMIS B A 06/06 06/030 06/040 06/050 A B D1 j6 E F M 45 0 9 M4 3 10. F G D1 j6 E H1

Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM Dmenson Dmensons CMM06/..U Ø Ø Ø Ø..06/06 Ø Ø Ø..06/030..06/040..06/050 CMM Ø Ø CMM06/..F CMM06/..FB CMM06/..FL H13

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Dmenson Dmensons A C D H8 CMM.. - CMM..F - CMM..FB - CMM..FL E F G G1 H H1 I I1 K L M 030/040 70 100 18 11.5 43 55 78 50 40 40 30 60 71 75 60 36.5 9 030/050 80 10 5 144 49 55 9 60 40 50 30 70 85 85 70 43.5 9 030/063 100 144 5 174 67 55 11 7 40 63 30 85 104 95 80 53 9 040/063 100 144 5 174 67 55 11 7 50 63 40 85 104 95 80 53 36.5 040/070 110 160 8 195 64 70 10 80 50 70 40 90 104 115 95 57 36.5 040/075 10 17 8 05 7 70 10 86 50 75 40 90 11 115 95 57 36.5 040/090 140 08 35 38 74 70 140 103 50 90 40 100 130 130 110 67 36.5 050/110 170 5.5 4 95 80 155 17.5 60 110 50 115 144 165 130 74 43.5 063/130 00 9.5 45 335 95 170 147.5 7 130 63 10 155 15 180 81 53 N h8 N1 N CMM.. - CMM..F - CMM..FB - CMM..FL O P Q R R1 S T V Z KE a b t Kg 030/040 6.5 87 55 71.5 57 6.5 6 35 1 M6x8(n.4) 45 6 030/050 8.5 98 64 84 57 7 30 40 13 M8x14(n.4) 45 8 0.8 (1.8) 8.3 (7.3) 030/063 8.5 110 80 10 57 8 36 50 145 M8x10(n.8) 45 8 8.3 7.5 040/063 8.5 110 80 10 71.5 8 36 50 155.5 M8x10(n.8) 45 8 8.3 9. 040/070 9 130 91 115 71.5 9 40 55 160 M8x14(n.8) 45 8 31.3 10.5 040/075 11 140 93 119 71.5 10 40 60 165 M8x14(n.8) 45 8 31.3 1.0 040/090 13 160 10 135 71.5 11 45 70 18 M10x18(n.8) 45 10 38.3 15.6 050/110 14 00 15 167.5 84 14 50 85 5 M10x18(n.8) 45 1 45.3 30. 063/130 16 50 140 187.5 10 15 60 100 45 M1x1(n.8) 45 14 48.8 55.0 CMM..F CMM..FB CMM..FL 3.9 5.0 a1 KA KB KC KM KN H8 KO KP KQ KA KB KC KM KN H8 KO KP KQ KA KB KC KM KN H8 KO KP KQ 030/040 45 67 7.5 4 80-95 60 9(n.4) 110 95 80 8.5 5 115-15 95 9.5(n.4) 140 11 97 7.5 4.5 80-95 60 9(n.4) 110 95 030/050 45 90 9 5 90-110 70 11(n.4) 15 110 89 9 5 130-145 110 9.5(n.4) 160 13 10 9 5 90-110 70 11(n.4) 15 110 030/063 45 8 10 6 150-160 115 11(n.4) 180 14 98 10 5 165-180 130 11(n.4) 00 160 11 10 6 150-160115 11(n.4) 180 14 040/063 45 8 10 6 150-160 115 11(n.4) 180 14 98 10 5 165-180 130 11(n.4) 00 160 11 10 6 150-160115 11(n.4) 180 14 040/070 45 111 13 6 165-180 130 14(n.4) 00 170 040/075 45 111 13 6 165-180 130 14(n.4) 00 170 040/090 45 111 13 6 175-190 15 14(n.4) 10 00 050/110 45 131 15 6 30 170 14(n.8) 80 60 063/130.5 140 15 6 55 180 16(n.8) 30 90 CMMIS 030/040 030/050 030/063 A B D1 j6 E F M 51 0 9 M4 3 10. F E B A 040/063 040/070 040/075 040/090 66 3 11 M5 4 1.5 G D1 j6 050/110 76 30 14 M6 5 16 063/130 94.5 40 19 M6 6 1.5 H14

Motorduttor combnat a vte senza fne Double reducton wormgearmotors CMM H Z N A G V Q H1 I1 R1 N V Q E R H O I Dmenson Dmensons CMM..U Ø C S F K L P N1 N1 Ø a a G1 KE KE ØM ØM..030/040..030/050 ØP..030/063..040/063..040/070..040/075..040/090..050/110..063/130 CMM KA KP G KB KC a1 ØKN KO F FB FL S F FB FL D KQ Ø KM CMM..F (../030 -../090) CMM..FB (../040 -../063) CMM..FL (../040 -../063) CMM..F (../110../130) D T T b G1 t Albero lento cavo / Hollow output shaft H15

CMM Motorduttor combnat a vte senza fne Double reducton wormgearmotors Accessor Albero lento semplce e doppo L1 B1 G1 B1 B B f b1 CMM 06/030 - CMM 063/130 Accessores Sngle and double output shaft L G1 B1 B f b1 DZ d CMM h7 B B1 G1 L L1 f b1 t1 06/030 14 30 3.5 63 10 18 M6 5 16 06/040 030/040 18 40 43 78 18 164 M6 6 0.5 06/050 030/050 5 50 53.5 9 153 199 M10 8 8 030/063 040/063 5 50 53.5 11 173 19 M10 8 8 040/070 8 60 63.5 10 19 47 M10 8 31 040/075 8 60 63.5 10 19 47 M10 8 31 040/090 35 80 84.5 140 34 309 M1 10 38 050/110 4 80 84.5 155 49 34 M16 1 45 063/130 45 80 85 170 65 340 M16 14 48.5 Bracco d reazone CMM K1 G KG KH R 06/030 85 14 3 8 15 06/040 030/040 100 14 31 10 18 06/050 030/050 100 14 38 10 18 030/063 040/063 150 14 47.5 10 18 040/070 00 5 46.5 0 30 040/075 00 5 46.5 0 30 040/090 00 5 56.5 0 30 050/110 50 30 6 5 35 063/130 50 30 69 5 35 Opzon Optons VS1 - VS - Vte sporgente / Extended nput shaft d t1 K1 SZ 79 M5x10 49 30 M5x10 5 18 1 g6 13.5 R Torque arm SC - Safety cover d t1 CMM 06/06 4 KH KG G M VS1 VS VS1 VS CMM A B D 1 E F G A B D 1 j6 j6 E F G 06/030 45 0 9 M4 3 10. 06/040 53 3 11 M5 4 1.5 06/050 64 30 14 M6 5 16 030/040 45 0 9 M4 3 10. 53 3 11 M5 4 1.5 030/050 45 0 9 M4 3 10. 64 30 14 M6 5 16 030/063 45 0 9 M4 3 10. 75 40 19 M6 6 1.5 040/063 53 3 11 M5 4 1.5 75 40 19 M6 6 1.5 040/070 53 3 11 M5 4 1.5 84 40 19 M6 6 1.5 040/075 53 3 11 M5 4 1.5 90 50 4 M8 8 7 040/090 53 3 11 M5 4 1.5 108 50 4 M8 8 7 050/110 64 30 14 M6 5 16 135 60 8 M10 8 31 063/130 75 40 19 M6 6 1.5 CM 30 40 50 63 70 75 90 110 130 M 47 54.5 6.5 73 75 79 94 10 117 Costruto su rchesta Bult on request H16

PU PU PU Motorduttor ad ngranagg clndrc monostado Sngle stage helcal gearmotors

Motorduttor ad ngranagg clndrc monostado Sngle stage helcal gearmotors PU Pag. Page Indce Index Caratterstche tecnche Techncal features I Desgnazone Clascaton I Sens d rotazone Drecton of rotaton I Lubrfcazone Lubrcaton I3 Carch radal Radal loads I3 Smbologa Symbols I3 Dat tecnc Techncal data I3 Motor applcabl IEC Motor adapters I4 Dmenson Dmensons I4 PU Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0915A I1

PU Motorduttor ad ngranagg clndrc monostado Sngle stage helcal gearmotors Caratterstche tecnche I motorduttor monostado ad ngranagg clndrc della sere PU hanno le seguent caratterstche prncpal: Carcassa, flanga entrata e flanga uscta n pressofusone d allumno; Ingranagg rettfcat; Lubrfcazone permanente con olo sntetco. Techncal features PU sngle stage helcal gearmotor range has the followng man features: De-cast alumnum housngs, nput and output flanges; Ground-hardened helcal gears; Permanent synthetc ol long-lfe lubrcaton. Desgnazone Clascaton RIDUTTORE / GEARBOX PU 01 FT1 5.70 71 B5 O3 MOTORE / MOTOR 0.5kW 4p 3ph 30/400V 50Hz T1 Tpo Type PU Grandezza Sze 01 Versone Verson U FT1 FT FT3 Rapporto Rato 5.70 8.57 IEC 63 71 80 Forma costruttva Verson B5 B14 Dam. Albero uscta Output shaft dam. Potenza Power Ved tabelle See tables Pol Poles p 4p 6p 8p Fas Phases 1ph 3ph Tensone Voltage 30V 30/400V Frequenza Frequency 50Hz 60Hz Pos. morsettera Termnal box pos. Sens d rotazone Drecton of rotaton U FT.. I

Motorduttor ad ngranagg clndrc monostado Sngle stage helcal gearmotors PU Lubrfcazone Tutt motorduttor della sere PU sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton (vscosty grade 30) makes t possble to use PU range n all mountng postons. Carch radal Radal loads n [mn -1 ] R [N] PU 01 500 643 400 693 300 763 50 810 00 873 150 961 100 1100 Smbologa Symbols n 1 [mn -1 ] Veloctà n ngresso / Input speed n [mn -1 ] Veloctà n uscta / Output speed Rapporto d rduzone / Rato P 1 Potenza n entrata / Input power M Coppa nomnale n uscta n funzone d P 1 / Output torque referred to P 1 Fattore d servzo / Servce factor R [N] Carco radale ammssble n uscta / Permtted output radal load A [N] Carco assale ammssble n uscta / Permtted output axal load PU Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.18 63A4 46 6.7 7.5 5.70 PU01 B5/B14 (1400 mn -1 ) 163 10.0 5.0 8.57 PU01 B5/B14 0. 63B4 46 8. 6.1 5.70 PU01 B5/B14 (1400 mn -1 ) 163 1.3 4.1 8.57 PU01 B5/B14 0.5 71A4 46 9.4 5.3 5.70 PU01 B5/B14 (1400 mn -1 ) 163 14.8 8.57 PU01 B5/B14 0.37 71B4 46 14 3.6 5.70 PU01 B5/B14 (1400 mn -1 ) 163 1 1.9 8.57 PU01 B5/B14 0.55 71C4 46 1.4 5.70 PU01 B5/B14 (1400 mn -1 ) 163 31 1.3 8.57 PU01 B5/B14 80A4 46 1.4 5.70 PU01 B5/B14 (1400 mn -1 ) 163 31 1.3 8.57 PU01 B5/B14 0.75 80B4 46 8.4 5.70 PU01 B5/B14 (1400 mn -1 ) 163 4 0.9 8.57 PU01 B5/B14 1.1 80B4 46 41 1. 5.7 PU01 B5/B14 (1400 mn -1 ) I3

PU Motor applcabl Motorduttor ad ngranagg clndrc monostado Sngle stage helcal gearmotors IEC Motor adapters IEC N M P D (rapporto / rato) 5.70 8.57 80 B5 130 165 00 19 80 B14 80 100 10 PU01 71 B5 110 130 160 14 B 71 B14 70 85 105 63 B5 95 115 140 11 BS 63 B14 60 75 90 Dmenson Dmensons PU01 Versone / Verson E H K L M N f7 O Peso / Weght [kg] FT1 6 3 10 140 115 95 M8 0.3 FT 6 3.5 10 160 130 110 9 0.4 FT3 6 3.5 10 00 165 130 11 0.5 I4

CMPU CMPU CMPU Motorduttor a vte senza fne con precoppa PU PU pre-stage wormgearmotors

Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU Pag. Page Indce Index Caratterstche tecnche Techncal features L Desgnazone Clascaton L Sens d rotazone Drecton of rotaton L3 Smbologa Symbols L3 Lubrfcazone Lubrcaton L4 Carch radal Radal loads L4 Motor applcabl IEC Motor adapters L5 Dat tecnc Techncal data L6 Dmenson Dmensons L1 Accessor Accessores L14 Opzon Optons L14 CMPU Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 0317A L1

CMPU Caratterstche tecnche Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Techncal features L elevata modulartà contraddstngue motorduttor a vte senza fne della sere CMPU: dvers kt entrata ed uscta l rendono estremamente versatl. Le caratterstche prncpal della sere CMPU sono: Carcassa n allumno pressofuso Le grandezze 090 è fornta con cuscnett a rull conc sulla vte Lubrfcazone permanente con olo sntetco The hgh degree of modularty s a desgn feature of CMPU wormgearmotors range thanks to a wde selecton of nput and output kts. Man features of CMPU range are: De cast alumnum housng Double taper roller bearng on sze 090 Permanent synthetc ol long lfe lubrcaton Desgnazone Clascaton RIDUTTORE A VITE SENZA FINE CON PRECOPPIA / PRE-STAGE WORMGEARBOX CMPU 01/050 U 57 71 B14 SZDX BRSX 90 P4 M1 VS Tpo Type Grandezza Sze Versone rduttore Gearbox Verson Rapporto Rato IEC Forma costruttva Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle Pos. d montaggo precoppa Pre stage mountng poston Pos. d montaggo Mountng poston Opzon Optons CMPU 01/050 01/063 01/070 01/075 01/090 U FD FS FLD FLS FBD FBS Vedere tabella See tables 63 71 80 B5 B14 SZDX SZSX DZ BRDX BRSX 0 90 180 70 P1 P P3 (standard) P4 M1 (B3) M (V6) M3 (B8) M4 (V5) M6 (B6) M5 (B7) VS P1 P P3 P4 (standard) Versone Rduttore Gearbox Verson Albero d uscta Output shaft Bracco d reazone Torque arm Angolo Angle 90 90 U FD FLD FBD FS FLS FBS SZDX SZSX DZ BRDX BRSX 180 70 70 0 L

Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU Desgnazone Clascaton MOTORE CM / CM MOTOR 0.75kW 4p 3ph 30/400V 50Hz T1 Potenza Power Pol Poles Fas Phases Tensone Voltage Frequenza Frequency Pos. morsettera Termnal box pos. Ved tabelle See tables p 4p 6p 8p 1ph 3ph 30V 30/400V 50Hz 60Hz Sens d rotazone Drecton of rotaton CMPU Smbologa n 1 [mn -1 ] Veloctà n ngresso / Input speed Symbols M Coppa n uscta n funzone d P 1 / Output torque referred to P 1 CMPU n [mn -1 ] Veloctà n uscta / Output speed Fattore d servzo / Servce factor Rapporto d rduzone / Rato R [N] Carco radale ammssble n uscta / Permtted output radal load P 1 Potenza n entrata / Nomnal nput power A [N] Carco assale ammssble n uscta / Permtted output axal load L3

CMPU Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Lubrfcazone Tutt motorduttor sono fornt complet d lubrfcante sntetco vscostà 30, pertanto possono essere nstallat n qualunque poszone d montaggo e non necesstano d manutenzone. Lubrcaton Permanent synthetc ol long-lfe lubrcaton (vscosty grade 30) makes t possble to use the gearmotors n all mountng postons; for ths reason they can be nstalled n any assembly poston and do not requre mantenance. Carch radal Radal loads n [mn -1 ] R [N] CMPU 01/050 CMPU 01/063 CMPU 01/070 CMPU 01/075 CMPU 01/090 47 805 3874 4141 4475 5009 35 3095 473 4568 4937 556 8 3334 4603 491 5318 5953 3 3559 4915 554 5678 6356 18 386 5334 570 616 6897 14 400 5800 600 6700 7500 =Rx 0. Quando l carco radale rsultante non è applcato sulla mezzera dell albero occorre calcolare quello effettvo con la seguente formula: Rc x R When the resultng radal load s not appled on the centre lne of the shaft t s necessary to calculate the effectve load wth the followng formula: CMPU 01/050 01/063 01/070 01/075 01/090 a 101 10 1 131 18 b 76 95 9 101 1 R MAX 400 5800 600 6700 7500 L R c R a (b +x) R R c R MAX a, b = valor rportat nella tabella a, b = values gven n the table L4

Motor applcabl Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU IEC Motor adapters D N M P CMPU IEC N M P D 01/050 01/063 01/070 01/075 01/090 63B5 95 115 140 63B14 60 75 90 71B5 110 130 160 71B14 70 85 105 80B5 130 165 00 80B14 80 100 10 63B5 95 115 140 63B14 60 75 90 71B5 110 130 160 71B14 70 85 105 80B5 130 165 00 80B14 80 100 10 63B5 95 115 140 63B14 60 75 90 71B5 110 130 160 71B14 70 85 105 80B5 130 165 00 80B14 80 100 10 63B5 95 115 140 63B14 60 75 90 71B5 110 130 160 71B14 70 85 105 80B5 130 165 00 80B14 80 100 10 63B5 95 115 140 63B14 60 75 90 71B5 110 130 160 71B14 70 85 105 80B5 130 165 00 80B14 80 100 10 ( 1 x ) 8.5 4.75 57 64.8 85.5 85.7 114 18.55 14.5 171 14.5 (5,7x5) (5,7x7,5) (5,7x10) (8,57x7,5) (5,7x15) (8,57x10) (5,7x0) (8,57x15) (5,7x5) (5,7x30) (8,57x5) 11 BS BS BS BS BS BS BS BS BS BS BS 14 B B B B B B B B B B B 19 11 BS BS BS BS BS BS BS BS BS BS BS 14 B B B B B B B B B B B 19 11 - BS BS BS BS BS BS BS BS BS BS 14 - B B B B B B B B B B 19-11 - BS BS BS BS BS BS BS BS BS BS 14 - B B B B B B B B B B 19-11 - BS BS BS BS BS BS BS BS BS BS 14 - B B B B B B B B B B 19 - CMPU IEC N M P D ( 1 x ) 8 57.1 85 34.8 48.5 456 514. 570 685.6 857 (5,7x40) (8,57x30) (5,7x50) (8,57x40) (8,57x50) (5,7x80) (8,57x60) (5,7x100) (8,57x80) (8,57x100) 63B5 95 115 140 63B14 60 75 90 11 BS 01/050 71B5 110 130 160 71B14 70 85 105 14 B 80B5 130 165 00 80B14 80 100 10 19 63B5 95 115 140 63B14 60 75 90 11 BS BS BS BS BS BS 01/063 71B5 110 130 160 71B14 70 85 105 14 B B B B B B 80B5 130 165 00 80B14 80 100 10 19 63B5 95 115 140 63B14 60 75 90 11 BS BS BS BS BS BS BS BS BS BS 01/070 71B5 110 130 160 71B14 70 85 105 14 B B B B B B B B B B 80B5 130 165 00 80B14 80 100 10 19 63B5 95 115 140 63B14 60 75 90 11 BS BS BS BS BS BS BS BS BS BS 01/075 71B5 110 130 160 71B14 70 85 105 14 B B B B B B B B B B 80B5 130 165 00 80B14 80 100 10 19 63B5 95 115 140 63B14 60 75 90 11 BS BS BS BS BS BS BS BS BS BS 01/090 71B5 110 130 160 71B14 70 85 105 14 B B B B B B B B B B 80B5 130 165 00 N.B. 80B14 80 100 10 19 Le aree evdenzate n grgo ndcano l applcabltà della corrspondente grandezza motore. N.B. Grey areas ndcate motor nputs avalable on each sze of unt. B/BS = Boccola d rduzone n accao B/BS = Metal shaft sleeve CMPU L5

CMPU Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.18 63B4 49 8 5.3 8.50 CMPU01/050 B5/B14 (1400 mn -1 ) 33 41 3.8 4.75 B5/B14 5 5 3.0 57.00 B5/B14 61.5 64.8 B5/B14 16 79.0 85.70 B5/B14 1 93 1.5 114.00 B5/B14 11 11 1.4 18.55 B5/B14 9.8 110 1.1 14.50 B5/B14 8. 10 1.4 171.00 B5/B14 6 4.7 64.8 CMPU01/063 B5/B14 16 80 3.6 85.70 B5/B14 1 9.8 114.00 B5/B14 11 110.8 18.55 B5/B14 9.8 108.1 14.50 B5/B14 8. 14.5 171.00 B5/B14 6.5 163 1.4 14.5 B5/B14 6.1 148 1.8 8.00 B5/B14 5.4 186 1.7 57.10 B5/B14 4.9 17 1.4 85.00 B5/B14 4.1 3 1. 34.80 B5/B14 3.3 58 0.9 48.50 B5/B14 1 93 4. 114.00 CMPU01/070 B5/B14 11 11 3.9 18.55 B5/B14 9.8 11 3.1 14.50 B5/B14 8. 14 3.7 171.00 B5/B14 6.5 168.0 14.5 B5/B14 6.1 148.6 8.00 B5/B14 5.4 186.4 57.10 B5/B14 4.9 17.0 85.00 B5/B14 4.1 3 1.7 34.80 B5/B14 3.3 58 1.3 48.50 B5/B14 3.1 0 1. 456.00 B5/B14.7 85 1.1 514.0 B5/B14.5 47 0.9 570.00 B5/B14.0 331 0.8 685.60 B5/B14 0.18 63B4 1 95 4.9 114.00 CMPU01/075 B5/B14 (1400 mn -1 ) 11 113 4.7 18.55 B5/B14 9.8 11 3.7 14.50 B5/B14 8. 14 4.4 171.00 B5/B14 6.5 168.4 14.5 B5/B14 6.1 151 3.1 8.00 B5/B14 5.4 186.9 57.10 B5/B14 4.9 17.3 85.00 B5/B14 4.1 7.1 34.80 B5/B14 3.3 58 1.6 48.50 B5/B14 3.1 0 1.5 456.00 B5/B14.7 91 1.3 514.0 B5/B14.5 47 1. 570.00 B5/B14.0 331 1.0 685.60 B5/B14 1.6 37 0.8 857.00 B5/B14 6.5 178 4.0 14.5 CMPU01/090 B5/B14 6.1 159 5.1 8.00 B5/B14 5.4 195 4.8 57.10 B5/B14 4.9 186 3.7 85.00 B5/B14 4.1 40 3.4 34.80 B5/B14 3.3 79.5 48.50 B5/B14 3.1 4. 456.00 B5/B14.7 316.0 514.0 B5/B14.5 68 1.8 570.00 B5/B14.0 364 1.5 685.60 B5/B14 1.6 403 1. 857.00 B5/B14 L6

Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0. 63C4 49 34 4.4 8.50 CMPU01/050 B5/B14 (1400 mn -1 ) 33 50 3.1 4.75 B5/B14 5 64.4 57.00 B5/B14 75.1 64.8 B5/B14 16 96 1.6 85.70 B5/B14 1 114 1. 114.00 B5/B14 11 136 1. 18.55 B5/B14 9.8 134 0.9 14.50 B5/B14 8. 146 1.1 171.00 B5/B14 5 65 4.4 57.00 CMPU01/063 B5/B14 76 3.9 64.8 B5/B14 16 97 3.0 85.70 B5/B14 1 11.3 114.00 B5/B14 11 134.3 18.55 B5/B14 9.8 13 1.7 14.50 B5/B14 8. 151.1 171.00 B5/B14 6.5 198 1. 14.5 B5/B14 6.1 181 1.4 8.00 B5/B14 5.4 7 1.4 57.10 B5/B14 4.9 09 1.1 85.00 B5/B14 4.1 7 1.0 34.80 B5/B14 0. 63C4 16 98 4.3 85.70 CMPU01/070 B5/B14 (1400 mn -1 ) 1 114 3.4 114.00 B5/B14 11 136 3. 18.55 B5/B14 9.8 136.5 14.50 B5/B14 8. 151 3.0 171.00 B5/B14 6.5 05 1.7 14.5 B5/B14 6.1 181.1 8.00 B5/B14 5.4 7.0 57.10 B5/B14 4.9 09 1.6 85.00 B5/B14 4.1 7 1.4 34.80 B5/B14 3.3 315 1.1 48.5 B5/B14 3.1 68 1.0 456.00 B5/B14.7 348 0.9 514.0 B5/B14.5 30 0.8 570.00 B5/B14 16 98 5.1 85.70 CMPU01/075 B5/B14 1 116 4.0 114.00 B5/B14 11 138 3.8 18.55 B5/B14 9.8 136 3.0 14.50 B5/B14 8. 151 3.6 171.00 B5/B14 6.5 05.0 14.5 B5/B14 6.1 184.5 8.00 B5/B14 5.4 7.4 57.10 B5/B14 4.9 09 1.9 85.00 B5/B14 4.1 77 1.7 34.80 B5/B14 3.3 315 1.3 48.5 B5/B14 3.1 68 1. 456.00 B5/B14.7 355 1.1 514.0 B5/B14.5 30 1.0 570.00 B5/B14.0 403 0.8 685.60 B5/B14 9.8 145 4.9 14.50 CMPU01/090 B5/B14 6.5 17 3.3 14.5 B5/B14 6.1 194 4. 8.00 B5/B14 5.4 38 4.0 57.10 B5/B14 4.9 6 3.0 85.00 B5/B14 4.1 9.8 34.80 B5/B14 3.3 340.0 48.50 B5/B14 3.1 95 1.8 456.00 B5/B14.7 385 1.6 514.0 B5/B14.5 37 1.5 570.00 B5/B14.0 443 1. 685.60 B5/B14 1.6 491 1.0 857.00 B5/B14 CMPU L7

CMPU Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.5 71A4 49 39 3.9 8.5 CMPU01/050 B5/B14 (1400 mn -1 ) 33 56.8 4.75 B5/B14 5 7.1 57.00 B5/B14 85 1.8 64.8 B5/B14 16 109 1.4 85.70 B5/B14 1 19 1.1 114.00 B5/B14 11 154 1.0 18.55 B5/B14 9.8 15 0.8 14.50 B5/B14 8. 165 1.0 171.00 B5/B14 5 73 3.9 57.00 CMPU01/063 B5/B14 86 3.4 64.8 B5/B14 16 110.6 85.70 B5/B14 1 17.0 114.00 B5/B14 11 15.0 18.55 B5/B14 9.8 150 1.5 14.50 B5/B14 8. 171 1.8 171.00 B5/B14 6.5 5 1.0 14.5 B5/B14 6.1 05 1.3 8.00 B5/B14 5.4 57 1. 57.10 B5/B14 4.9 37 1.0 85.00 B5/B14 4.1 308 0.8 34.80 B5/B14 16 111 3.8 85.70 CMPU01/070 B5/B14 1 19 3.0 114.00 B5/B14 11 154.8 18.55 B5/B14 9.8 154. 14.50 B5/B14 8. 171.7 171.00 B5/B14 6.5 3 1.5 14.5 B5/B14 5.4 57 1.8 57.10 B5/B14 6.1 05 1.8 8.00 B5/B14 4.9 37 1.4 85.00 B5/B14 4.1 308 1. 34.80 B5/B14 3.3 357 0.9 48.50 B5/B14 3.1 304 0.9 456.00 B5/B14.7 394 0.8 514.0 B5/B14 0.5 71A4 16 111 4.5 85.70 CMPU01/075 B5/B14 (1400 mn -1 ) 1 131 3.6 114.00 B5/B14 11 156 3.4 18.55 B5/B14 9.8 154.7 14.50 B5/B14 8. 171 3. 171.00 B5/B14 6.5 3 1.8 14.5 B5/B14 5.4 57.1 57.10 B5/B14 6.1 09. 8.00 B5/B14 4.9 37 1.7 85.00 B5/B14 4.1 314 1.5 34.80 B5/B14 3.3 357 1.1 48.50 B5/B14 3.1 304 1.1 456.00 B5/B14.7 403 0.9 514.0 B5/B14.5 34 0.8 570.00 B5/B14 9.8 164 4.3 14.50 CMPU01/090 B5/B14 8. 179 5.3 171.00 B5/B14 6.5 46.9 14.5 B5/B14 6.1 0 3.7 8.00 B5/B14 5.4 70 3.5 57.10 B5/B14 4.9 56.7 85.00 B5/B14 4.1 331.5 34.80 B5/B14 3.3 385 1.8 48.50 B5/B14 3.1 334 1.6 456.00 B5/B14.7 437 1.4 514.0 B5/B14.5 370 1.3 570.00 B5/B14.0 503 1.1 685.60 B5/B14 1.6 557 0.9 857.00 B5/B14 L8

Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.37 71B4 49 58.6 8.50 CMPU01/050 B5/B14 (1400 mn -1 ) 33 83 1.9 4.75 B5/B14 5 107 1.4 57.00 B5/B14 15 1. 64.8 B5/B14 16 161 1.0 85.70 B5/B14 49 58 4.8 8.50 CMPU01/063 B5/B14 33 84 3.5 4.75 B5/B14 5 108.6 57.00 B5/B14 17.3 64.8 B5/B14 16 163 1.8 85.70 B5/B14 1 189 1.4 114.00 B5/B14 11 5 1.3 18.55 B5/B14 9.8 1.0 14.50 B5/B14 8. 53 1. 171.00 B5/B14 6.5 333 0.7 14.5 B5/B14 6.1 304 0.9 8.00 B5/B14 5.4 381 0.8 57.10 B5/B14 4.9 35 0.7 85.00 B5/B14 5 110 3.8 57.00 CMPU01/070 B5/B14 19 3.1 64.8 B5/B14 16 165.5 85.70 B5/B14 1 191.0 114.00 B5/B14 11 9 1.9 18.55 B5/B14 9.8 9 1.5 14.50 B5/B14 8. 53 1.8 171.00 B5/B14 6.5 344 1.0 14.5 B5/B14 6.1 304 1. 8.00 B5/B14 5.4 381 1. 57.10 B5/B14 4.9 35 1.0 85.00 B5/B14 4.1 457 0.8 34.80 B5/B14 0.37 71B4 5 110 4.6 57.00 CMPU01/075 B5/B14 (1400 mn -1 ) 19 3.8 64.8 B5/B14 16 165 3.0 85.70 B5/B14 1 194.4 114.00 B5/B14 11 3.3 18.55 B5/B14 9.8 9 1.8 14.50 B5/B14 8. 53. 171.00 B5/B14 6.5 344 1. 14.5 B5/B14 6.1 310 1.5 8.00 B5/B14 5.4 381 1.4 57.10 B5/B14 4.9 35 1.1 85.00 B5/B14 4.1 466 1.0 34.80 B5/B14 3.3 59 0.8 48.50 B5/B14 16 169 4.4 85.70 CMPU01/090 B5/B14 1 03 4.0 114.00 B5/B14 11 38 3.7 18.55 B5/B14 9.8 43.9 14.50 B5/B14 8. 66 3.5 171.00 B5/B14 6.5 365 1.9 14.5 B5/B14 6.1 37.5 8.00 B5/B14 5.4 400.4 57.10 B5/B14 4.9 380 1.8 85.00 B5/B14 4.1 491 1.7 34.80 B5/B14 3.3 571 1. 48.50 B5/B14 3.1 496 1.1 456.00 B5/B14.7 648 1.0 514.0 B5/B14.5 549 0.9 570.00 B5/B14 CMPU L9

CMPU Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 71C4 49 86 1.7 8.50 CMPU01/050 B5/B14 (1400 mn -1 ) 33 14 1.3 4.75 B5/B14 5 159 1.0 57.00 B5/B14 187 0.8 64.8 B5/B14 49 86 3. 8.50 CMPU01/063 B5/B14 33 16.3 4.75 B5/B14 5 161 1.8 57.00 B5/B14 189 1.5 64.8 B5/B14 16 43 1. 85.70 B5/B14 1 81 0.9 114.00 B5/B14 11 335 0.9 18.55 B5/B14 9.8 330 0.7 14.50 B5/B14 8. 377 0.8 171.00 B5/B14 33 17 3. 4.75 CMPU01/070 B5/B14 5 163.6 57.00 B5/B14 191.1 64.8 B5/B14 16 46 1.7 85.70 B5/B14 1 85 1.4 114.00 B5/B14 11 340 1.3 18.55 B5/B14 9.8 340 1.0 14.50 B5/B14 8. 377 1. 171.00 B5/B14 6.5 51 0.7 14.5 B5/B14 6.1 45 0.8 8.00 B5/B14 5.4 567 0.8 57.10 B5/B14 33 17 3.8 4.75 CMPU01/075 B5/B14 5 163 3.1 57.00 B5/B14 191.5 64.8 B5/B14 16 46.0 85.70 B5/B14 1 89 1.6 114.00 B5/B14 11 345 1.5 18.55 B5/B14 9.8 340 1. 14.50 B5/B14 8. 377 1.5 171.00 B5/B14 6.5 51 0.8 14.5 B5/B14 6.1 461 1.0 8.00 B5/B14 5.4 567 1.0 57.10 B5/B14 4.9 54 0.8 85.00 B5/B14 0.55 80A4 5 168 4.5 57.00 CMPU01/090 B5/B14 (1400 mn -1 ) 196 3.6 64.8 B5/B14 16 5 3.0 85.70 B5/B14 1 30.7 114.00 B5/B14 11 354.5 18.55 B5/B14 9.8 361.0 14.50 B5/B14 8. 396.4 171.00 B5/B14 6.5 543 1.3 14.5 B5/B14 6.1 486 1.7 8.00 B5/B14 5.4 595 1.6 57.10 B5/B14 4.9 566 1. 85.00 B5/B14 4.1 731 1.1 34.80 B5/B14 3.3 850 0.8 48.50 B5/B14 49 86 1.7 8.50 CMPU01/050 B5/B14 33 14 1.3 4.75 B5/B14 5 159 1.0 57.00 B5/B14 187 0.8 64.8 B5/B14 49 86 3. 8.50 CMPU01/063 B5/B14 33 16.3 4.75 B5/B14 5 161 1.8 57.00 B5/B14 189 1.5 64.8 B5/B14 16 43 1. 85.70 B5/B14 1 81 0.9 114.00 B5/B14 11 335 0.9 18.55 B5/B14 9.8 330 0.7 14.50 B5/B14 8. 377 0.8 171.00 B5/B14 33 17 3. 4.75 CMPU01/070 B5/B14 5 163.6 57.00 B5/B14 191.1 64.8 B5/B14 16 46 1.7 85.70 B5/B14 1 85 1.4 114.00 B5/B14 11 340 1.3 18.55 B5/B14 9.8 340 1.0 14.50 B5/B14 8. 377 1. 171.00 B5/B14 6.5 51 0.7 14.5 B5/B14 6.1 45 0.8 8.00 B5/B14 5.4 567 0.8 57.10 B5/B14 L10

Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU Dat tecnc Techncal data P 1 n [mn -1 ] M P 1 n [mn -1 ] M 0.55 80A4 33 17 3.8 4.75 CMPU01/075 B5/B14 (1400 mn -1 ) 5 163 3.1 57.00 B5/B14 191.5 64.8 B5/B14 16 46.0 85.70 B5/B14 1 89 1.6 114.00 B5/B14 11 345 1.5 18.55 B5/B14 9.8 340 1. 14.50 B5/B14 8. 377 1.5 171.00 B5/B14 6.5 51 0.8 14.5 B5/B14 6.1 461 1.0 8.00 B5/B14 5.4 567 1.0 57.10 B5/B14 4.9 54 0.8 85.00 B5/B14 5 168 4.5 57.00 CMPU01/090 B5/B14 196 3.6 64.8 B5/B14 16 5 3.0 85.70 B5/B14 1 30.7 114.00 B5/B14 11 354.5 18.55 B5/B14 9.8 361.0 14.50 B5/B14 8. 396.4 171.00 B5/B14 6.5 543 1.3 14.5 B5/B14 6.1 486 1.7 8.00 B5/B14 5.4 595 1.6 57.10 B5/B14 4.9 566 1. 85.00 B5/B14 4.1 731 1.1 34.80 B5/B14 3.3 850 0.8 48.50 B5/B14 0.75 80B4 49 117 1.3 8.50 CMPU01/050 B5/B14 (1400 mn -1 ) 33 169 0.9 4.75 B5/B14 49 117.4 8.50 CMPU01/063 B5/B14 33 17 1.7 4.75 B5/B14 5 0 1.3 57.00 B5/B14 58 1.1 64.8 B5/B14 16 331 0.9 85.70 B5/B14 1 383 0.7 114.00 B5/B14 11 458 0.7 18.60 B5/B14 33 174.3 4.75 CMPU01/070 B5/B14 5 3 1.9 57.00 B5/B14 61 1.5 64.8 B5/B14 16 335 1. 85.70 B5/B14 1 389 1.0 114.00 B5/B14 11 464 0.9 18.60 B5/B14 9.8 465 0.7 14.50 B5/B14 8. 515 0.9 171.00 B5/B14 0.75 80B4 33 174.8 4.75 CMPU01/075 B5/B14 (1400 mn -1 ) 5 3.3 57.00 B5/B14 61 1.9 64.8 B5/B14 16 335 1.5 85.70 B5/B14 1 395 1. 114.00 B5/B14 11 471 1.1 18.60 B5/B14 9.8 465 0.9 14.50 B5/B14 8. 515 1.1 171.00 B5/B14 6.1 69 0.7 8.00 B5/B14 33 178 4.0 4.75 CMPU01/090 B5/B14 5 9 3.3 57.00 B5/B14 68.6 64.8 B5/B14 16 344. 85.70 B5/B14 1 41.0 114.00 B5/B14 11 484 1.8 18.55 B5/B14 9.8 493 1.4 14.50 B5/B14 8. 541 1.7 171.00 B5/B14 6.5 74 1.0 14.5 B5/B14 6.1 664 1. 8.00 B5/B14 5.4 813 1. 57.10 B5/B14 4.9 77 0.9 85.00 B5/B14 4.1 998 0.8 34.80 B5/B14 1.1 80C4 49 17 0.9 8.50 CMPU01/050 B5/B14 (1400 mn -1 ) 49 17 1.6 8.50 CMPU01/063 B5/B14 33 51 1. 4.75 B5/B14 5 33 0.9 57.00 B5/B14 16 446 0.7 85.50 B5/B14 33 55 1.6 4.75 CMPU01/070 B5/B14 5 37 1.3 57.00 B5/B14 16 45 1.0 85.50 B5/B14 33 55 1.9 4.75 CMPU01/075 B5/B14 5 37 1.5 57.00 B5/B14 16 459 1. 85.50 B5/B14 1 578 0.8 114.00 B5/B14 33 61.7 4.75 CMPU01/090 B5/B14 5 335. 57.00 B5/B14 16 471 1.8 85.50 B5/B14 1 603 1.3 114.00 B5/B14 9.8 73 1.0 14.50 B5/B14 8. 79 1. 171.00 B5/B14 6.1 97 0.8 8.00 B5/B14 CMPU L11

CMPU Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Dmenson Dmensons CMPU.. - CMPU..F - CMPU..FB - CMPU..FL A C D H8 E F G1 H HX I K L M N h8 N1 01/050 80 10 5 144 49 9 60 36.5 50 70 85 85 70 43.5 01/063 100 144 5 174 67 11 7 36.5 63 85 104 95 80 53 01/070 110 160 8 195 64 10 80 36.5 70 90 104 115 95 57 01/075 10 17 8 05 7 10 86 36.5 75 90 11 115 95 57 01/090 140 08 35 38 74 140 103 36.5 90 100 130 130 110 67 CMPU.. - CMPU..F - CMPU..FB - CMPU..FL O P Q R S T V Z ZZ KE a b t Kg 01/050 8.5 98 64 84 7 30 40 1010 M8x10(n.4) 45 8 8.3 (7.3) 6.0 01/063 8.5 110 80 10 8 36 50 8 M8x14(n.8) 45 8 8.3 8.7 01/070 9 130 91 115 9 40 55 38 M8x14(n.8) 45 8 31.3 10.0 01/075 11 140 93 119 10 40 60 4343 M8x14(n.8) 45 8 31.3 11.5 01/090 13 160 10 135 11 45 70 6060 M10x18(n.8) 45 10 38.3 15.5 CMPU..F CMPU..FB CMPU..FL a1 KA KB KC KM KN H8 KO KP KQ KA KB KC KM KN H8 KO KP KA KB KC KM KN H8 KO KP KQ 01/050 45 90 9 5 90-110 70 11(n.4) 15 110 89 9 5 130-145 110 9.5(n.4) 160 10 9 5 90-110 70 11(n.4) 15 110 01/063 45 8 10 6 150-160 115 11(n.4) 180 14 98 10 5 165-180 130 11(n.4) 00 11 10 6 150-160 115 11(n.4) 180 14 01/070 45 111 13 6 165-180 130 14(n.4) 00 170 01/075 45 111 13 6 165-180 130 14(n.4) 00 170 01/090 45 111 13 6 175-190 15 14(n.4) 10 00 L1

Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors CMPU H A V Q N V Q E R H O I Dmenson Dmensons CMPU..U Z X HX Y Ø C S F K L P N1 N1 Ø a a G1 KE KE Ø M ØM ØP..01/050..01/063..01/070..01/075..01/090 KA KP KB KC CMPU a1 ØKN KO F FB FL S F FB FL D KQ Ø KM T T b CMPU..F (..01/050 -.. 01/090) CMPU..FB (.. 01/050 -.. 01/063) CMPU..FL (.. 01/050 -.. 01/063) D G1 t Albero lento cavo / Hollow output shaft L13

CMPU Motorduttor a vte senza fne con precoppa PU PU Pre-stage wormgearmotors Accessor Albero lento semplce e doppo Accessores Sngle and double output shaft L1 L B1 G1 B1 G1 B1 B B f b1 B f b1 DZ SZ CMPU d h7 B B1 G1 L L1 f b1 t1 01/050 5 50 53.5 9 153 199 M10 8 8 01/063 5 50 53.5 11 173 19 M10 8 8 01/070 8 60 63.5 10 19 47 M10 8 31 01/075 8 60 63.5 10 19 47 M10 8 31 01/090 35 80 84.5 140 34 309 M1 10 38 CMPU K1 G KG KH R 01/050 100 14 38 10 18 01/063 150 14 47.5 10 18 01/070 00 5 46.5 0 30 01/075 00 5 46.5 0 30 01/090 00 5 56.5 0 30 KH d t1 d t1 Bracco d reazone Torque arm K1 Ø R KG G SC - Safety Cover CMPU M M 01/050 6.5 01/063 73 01/070 75 01/075 79 01/090 94 Opzon Optons VS - Vte sporgente / Extended nput shaft B A CMPU A B D 1 j6 E F G 01/050 64 30 14 M6 5 16 F D1 j6 01/063 75 40 19 M6 6 1.5 01/070 84 40 19 M6 6 1.5 G 01/075 90 50 4 M8 8 7 E 01/090 108 50 4 M8 8 7 Costruto su rchesta Bult on request L14

Appendce Appendx

Appendce Appendx Indce Lste part d rcambo Index Spare parts lst Pag. Page CMG.. CMG.. M CMG..3 CMG..3 M3 CMB.. CMB.. M4 CMB..3 CMB..3 M5 KFT105-FT105 KFT105-FT105 M6 FT146-FT196 FT146-FT196 M7 ATS.. ATS.. M8 ATS..3 ATS..3 M9 CM06..CM130 CM06..CM130 M10 PU PU M11 Boccole d rduzone n accao Metal shaft sleeves M1 Questa sezone annulla e sosttusce ogn precedente edzone o revsone. Qualora questa sezone non V sa gunta n dstrbuzone controllata, l aggornamento de dat v contenuto non è asscurato. In tal caso la versone pù aggornata è dsponble sul nostro sto nternet www.transtecno.com Ths secton replaces any prevous edton and revson. If you obtaned ths catalogue other than through controlled dstrbuton channels, the most up to date content s not guaranteed. In ths case the latest verson s avalable on our web ste www.transtecno.com 017A M1

Lsta part d rcambo Lste part d rcambo Spare parts lst CMG.. Spare parts lst 40 4 37 38 3 41 34 3 33 38 36 35 3 33 34 7 8 31 6 9 30 3 4 5 1 0 1 3 4 8 9 10 11 1 15 14 13 16 19 18 17 7 6 5 CMG Anell d tenuta / Ol seals 1 30 37 00 /40/7 0/37/7 01 30/5/7 5/47/7 35/5/7 0 35/5/7 5/47/7 35/5/7 03 40/7/7 30/5/7 40/60/7 04 45/7/7 30/5/7 40/60/7 M

Lsta part d rcambo Lste part d rcambo Spare parts lst CMG..3 Spare parts lst 40 37 38 4 39 8 49 3 33 34 41 36 38 47 48 35 43 44 45 3 4 46 9 30 6 31 3 7 33 8 34 31 3 4 5 1 0 1 3 4 8 9 10 11 1 15 14 13 16 19 18 17 7 6 5 CMG Anell d tenuta / Ol seals 1 30 37 013 30/5/7 5/47/7 35/5/7 03 35/5/7 5/47/7 35/5/7 033 40/7/7 30/5/7 40/60/7 043 45/7/7 30/5/7 40/60/7 M3

Lsta part d rcambo Lste part d rcambo Spare parts lst CMB.. 40 Spare parts lst 4 38 39 41 3 33 34 38 36 35 3 33 34 9 30 31 3 17 5 7 8 1 3 4 10 8 7 3 9 5 4 1 8 CMB Anell d tenuta / Ol seals 8 30 40 30/55/7 0/37/7 50 40/6/7 0/37/7 M4

Lsta part d rcambo Lste part d rcambo Spare parts lst CMB..3 Spare parts lst 40 4 37 38 39 41 3 33 34 38 36 35 3 33 34 31 11 18 13 16 9 30 3 1 6B 3 7 6A 4 0 8 10 15 14 13 8 7 3 1 11 9 5 4 1 8 CMB Anell d tenuta / Ol seals RCA 8 30 37 11 633 45/75/8 5/47/7 35/5/7 47/7 903 55/90/10 30/5/7 40/60/7 5/7 M5

Lsta part d rcambo Lste part d rcambo Spare parts lst KFT105 - FT105 Spare parts lst FT105/3...IEC 56B14 8 7 solo FT105/4 e KFT 105/4 FT105/4 and KFT105/4 only 30 31 3 9 1 0 4 3 5 6 1 KFT 105/3... 33 16 17 18 19 10 9 14 15 1 13 8 11 1 7 30 4 5 6 3 1 FT105 KFT105 Anell d tenuta / Ol seals RCA 1 8 30/47/07 1//07 x7 M6

Lsta part d rcambo Lste part d rcambo Spare parts lst FT146 - FT196 Spare parts lst 30 18 3 1 19 4 5 6 7 8 9 14 15 16 17 13 11 1 9 10 7 0 8 1 5 6 4 3 1 FT Anell d tenuta / Ol seals RCA 1 0 9 146 35/5/07 5/4/07 4x7 196 50/7/08 30/47/08 47x7 M7

Lsta part d rcambo Lste part d rcambo Spare parts lst ATS.. Spare parts lst 36 37 35 34 33 3 30 31 5 4 3 1 0 19 8 7 6 16 14 15 13 1 11 17 9 18 1 3 5 4 3 6 7 1 8 10 9 ATS Anell d tenuta / Ol seals RCA 1 1 11 90 50/80/8 30/4/7 47x7 91 60/95/8 30/4/7 47x7 M8

Lsta part d rcambo Lste part d rcambo Spare parts lst ATS..3 Spare parts lst 33 3 31 30 1 0 19 35 34 5 3 8 7 6 14 15 13 1 11 16 17 41 40 9 38 37 39 37 18 36 5 4 3 1 3 6 7 1 8 10 9 ATS Anell d tenuta / Ol seals RCA 1 1 11 903 50/80/8 5/47/7 47x7 913 60/95/8 5/47/7 47x7 M9

Lste part d rcambo Spare parts lst Lsta part d rcambo Spare parts lst CM06..CM130 10 9 4 8 7 6 Solo CM040-130 CM 040-130 only 13 1 11 8 Solo CM130 / CM130 only 14 16 9 15 11 19 1 Solo CM06 e CM030 / CM06 and CM030 only 18 7 6 5 4 3 Solo CM063-110 CM063-110 only 1 14 13 9 0 CM Anell d tenuta / Ol seals 3 9 06 15/8/7 0/3/5 030 0/37/7 5/40/7 040 5/4/7 30/47/7 050 30/47/7 40/55/7 063 35/6/7 45/65/8 070 40/68/8 45/65/8 075 40/68/7 50/7/8 090 40/68/7 60/85/8 110 50/80/8 65/85/10 130 50/65/8 70/90/10 M10

Lsta part d rcambo Lste part d rcambo Spare parts lst PU Spare parts lst 1 3 4 8 7 6 5 9 19 16 18 17 15 14 1 13 11 10 PU Anell d tenuta / Ol seals 3 19 01 30/47/7 5/7/7 M11

Lste part d rcambo Spare parts lst Boccole d rduzone n accao Metal shaft sleeves E -0.01-0.03 I +0.01 +0.03 L Tpo / Type Dmenson mm. / Dmensons mm. E I L B 0911 11 9 B 1114 14 11 8 B 1419 19 14 40 B 194 4 19 50 B 48 8 4 60 B 838 38 8 70 BS 0914 14 9 6 BS 1119 19 11 35 BS 144 4 14 40 BS 198 8 19 40 BS 438 38 4 70 Nota: Le boccole n accao sono fornte complete d lnguette. Note: The metal shaft sleeves are suppled complete wth keys. M1

MA TRANSTECNO S.A.P.I. DE C.V. Av. Mundal # 176, Parque Industral JM Apodaca, Nuevo León, C.P. 66600 MÉXICO T +5 811334090 nfo@transtecno.com.mx www.transtecno.com.mx TRANSTECNO SRL Va Cadut d Sabbuno, 11/D-E 40011 Anzola dell Emla (BO) ITALY T+39 051 64 5 811 F +39 051 73 39 04 sales@transtecno.com www.transtecno.com HANGZHOU TRANSTECNO POWER TRANSMISSIONS CO LTD Changlan Road, Fengdu Industry zone, Pngyao Town Yuhang Area, Hangzhou, 311115 - CHINA T +86 571 86 9 0 60 F +86 571 86 9 18 10 nfo-chna@transtecno.com www.transtecno.cn CATDCALU0915 TRANSTECNO U.S.A. LLC 5440 S.W. 156th Place Mam, FL 33185 - USA Tel: +1 (305) 0-443 Fax: +1 (305) 0-5945 usaoffce@transtecno.com TRANSTECNO B.V. De Stuwdam, 43 3815 KM Ameroort - NETHERLANDS Tel: +31(0) 33 45 19 505 Fax: +31(0) 33 45 19 506 nfo@transtecno.nl www.transtecno.nl SALES OFFICE GUANGZHOU Room 401A, LeTan Buldng, No.188 TangAn Road, Tanhe Dstrct, Guangzhou Cty, 510665 - CHINA Tel:+ 86 0 387 760 57 Fax: + 86 0 387 761 7 guangzhouoffce@transtecno.com SALES OFFICE BRAZIL Rua Dr. Frere Alemão 155 / 40 - CEP. 90450-060 Auxladora Porto Alegre RS - BRAZIL Tel: +55 51 351 5447 Fax: +55 51 351 5447 Moble: +55 51 811 45 96 brazloffce@transtecno.com www.transtecno.com.br TRANSTECNO IBÉRICA THE MODULAR GEARMOTOR, S.A. C/Engny, Nave 6-08850 Gavà (Barcelona) - SPAIN Tel: +34 931 598 950 nfo@transtecno.es www.transtecno.es SALES OFFICE FRANCE 1 Impasse des Mûrers 38300 Ruy - FRANCE Tel: +33 (0) 6 85 1 09 87 Fax-Italy: +39 051 733 904 franceoffce@transtecno.com www.transtecno.fr SALES OFFICE INDIA A/10, Anagha, S.N. Road, Mulund (W) Mumba 400080 - INDIA Tel: +91 980614698 Fax-Italy: +39 051 733 904 ndaoffce@transtecno.com SALES OFFICE SOUTH KOREA D-304 Songdo BRC Smart Valley 30, Songdomrae-ro, Yeonsu-gu, Incheon, 406-840 - KOREA Tel: +8 70 888 107 Fax: +8 3 815 107 Moble: +8 10 5094 107 koreaoffce@transtecno.com www.transtecno.com SALES OFFICE OCEANIA Unt 3, 18-4 Rcketts Road, Mount Waverley 3149 Vctora - AUSTRALIA Tel: +61 9544 8005 Fax: +61 9543 8005 Moble: +61 0438 060 997 oceanaoffce@transtecno.com www.transtecno.com.au