AS/DS. Gruppo Frizione/Freno a comando pneumatico Funzionamento a secco Air Actuated Clutch/Brake Unit (Dry Running) Serie/Series

AS/DS Serie/Series Gruppo Frizione/Freno a comando pneumatico Funzionamento a secco Air Actuated Clutch/Brake Unit (Dry Running) Via Piemonte 14-20841 Carate Brianza B - Italia +39 0362.91.22.20 info@ompisrl.com www.ompisrl.com

AS/DS Gruppo Frizione/Freno a comando pneumatico, funzionamento a secco Air Actuated Clutch/Brake Unit (Dry Running) AS GRAZI ALL ACCRSCIUTA ARA DI SPITA DL PISTO SI HAO L SGUTI CARATTRISTICH: 1) ingombri ridotti 2) coppie freno e frizione incrementate 3) inerzia propria ridotta 4) grande versatilità d applicazione DU TO TH ICRAS OF TH THRUST ARA OF TH AIR PISTO THR AR TH FOLLOWIG FATURS: 1) reduced OD dimensions 2) increase of the clutch and brake torques 3) reduced own inertia 4) great versatility of mounting DS

Coppie Freno/Frizione in Funzione della pressione di comando e del numero di molle Clutch and Brake torques due to the operating pressure and the springs number AS/DS AS 0250 AS 0470 AS 0900 AS 1400 AS 1900 AS 2600 AS 3800 AS 5100 AS 7600 olle Springs Coppia freno Brake torque Pressione apertura freno Opening pressure Coppia frizione alle pressioni Clutch torque at pressures 6 bar 5.5 bar 5 bar 4.5 bar 4 bar n m m psi m m m m m Kg/m2 12 1.800 2,9 42 1.840 1.500 1.160 820 480 0,25 10 1.500 2,4 35 2.210 1.870 1.530 1.190 850 0,25 8 1.200 1,9 28 2.580 2.240 1.900 1.560 1.220 0,24 6 900 1,5 22 2.950 2.610 2.270 1.930 1.590 0,24 16 3.700 3,0 44 3.790 3.100 2.420 1.750 1.070 0,87 14 3.250 2,6 38 4.350 3.650 3.000 2.300 1.610 0,86 12 2.800 2,2 32 4.900 4.200 3.550 2.850 2.200 0,85 10 2.350 1,9 28 5.450 4.750 4.100 3.400 2.700 0,84 8 1.850 1,5 22 6.000 5.300 4.620 3.950 3.250 0,83 6 1.400 1,1 16 6.550 5.850 5.160 4.500 3.800 0,82 16 6.800 3,0 44 7.000 5.750 4.500 3.250 2.000 2,34 14 5.950 2,6 38 7.950 6.750 5.500 4.250 3.000 2,31 12 5.100 2,3 33 8.950 7.700 6.500 5.250 4.000 2,28 10 4.250 1,9 28 9.950 8.700 7.450 6.250 5.000 2,25 8 3.400 1,5 22 10.950 9.700 8.450 7.200 6.000 2,22 6 2.550 1,1 16 11.900 10.700 9.450 8.200 6.950 2,19 15 11.000 3,1 45 10.950 9.000 7.050 5.050 3.100 4,65 12 8.800 2,5 36 13.500 11.500 9.550 7.600 5.600 4,54 9 6.600 2,0 29 16.000 14.050 12.100 10.100 8.150 4,43 6 4.400 1,2 17 18.550 16.550 14.600 12.650 10.650 4,33 18 14.000 3,0 44 14.850 12.300 9.700 7.150 4.550 7,17 15 11.650 2,6 38 17.500 14.950 12.400 9.800 7.250 7,02 12 9.300 2,1 30 20.150 17.600 15.050 12.450 9.900 6,87 9 7.000 1,7 25 22.800 20.250 17.700 15.100 12.550 6,73 6 4.650 1,3 19 25.500 22.900 20.350 17.750 15.200 6,58 21 20.000 3,0 44 21.000 17.350 13.700 10.050 6.350 14,71 18 17.150 2,6 38 24.300 20.650 16.950 13.300 9.650 14,45 15 14.300 2,2 32 27.550 23.900 20.250 16.550 12.900 14,20 12 11.400 1,7 25 30.850 27.150 23.500 18.850 16.200 13,94 9 8.600 1,3 19 34.100 30.450 26.800 23.100 19.450 13,69 21 29.000 3,0 44 30.000 24.700 19.400 14.100 8.800 25,46 18 24.850 2,6 38 34.800 29.500 24.200 18.900 13.600 25,07 15 20.700 2,2 32 39.600 34.300 29.000 23.700 18.400 24,69 12 16.550 1,7 25 44.350 39.050 33.800 28.500 23.200 24,30 9 12.400 1,3 19 49.150 43.850 38.550 33.250 28.000 23,91 21 38.500 3,0 44 39.300 32.350 25.400 18.400 11.450 36 18 33.000 2,6 38 45.650 38.700 31.700 24.750 17.750 37,91 15 27.500 2,2 32 52.000 45.000 38.050 31.050 24.100 37,26 12 22.000 1,7 25 58.300 51.350 44.350 37.400 30.450 36,61 9 16.500 1,3 19 64.650 57.650 50.700 43.700 36.750 35,96 18 48.000 3,0 44 55.000 45.800 36.600 27.400 18.000 59,33 15 40.000 2,5 36 64.000 55.000 45.800 36.640 27.400 58,02 12 32.000 2,0 29 73.000 64.200 55.000 45.800 36.600 56,72 9 24.000 1,5 22 82.500 73.400 64.000 55.000 45.800 55,41 Inerzia Inertia

AS-BBL ODALITA' DI FISSAGGIO SULL'ALBRO ODALITY OF O-SHAFT OUTIG odalità di fissaggio sull albero odality of on-shaft mounting 1) Con chiavette a 90 rispetto 2) Con calettatori ai fori di entrata aria 1) Con chiavette a 90o rispetto (interpellare ai fori d entrata ns. uff aria tec.) 1) Keyways at 90o against air inlet holes 1) keyways at 90 2) Con against calettatori (interpellare 2) with nostri locking uffici tecnici) device air inlet holes 2) With locking device (contact (contact our our engineering) engineering) extraction bore escluse scluse dalla fornitura fornitura not ot supplied by by us us Foro alimentazione aria aria air feed bore air feed bore P n 2 no2 a 180o 180 P P n 2 no2 a at 180o 180 AS 0250 AS 0470 AS 0900 AS 1400 AS 1900 AS 2600 AS 3800 AS 5100 AS 7600 A max 80 (3.15) 95 (3.74) 125 (4.92) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) / A min 45 (1.77) 55 (2.17) 70 (2.76) 80 (3.15) 90 (3.54) 100 (3.94) 110 (4.33) 115 (4.53) 130 (5.12) A max B 352 (13.86) 80 435 (17.13) 95 535 (21.06) 125 620 (24.41) 140 680 (26.77) 160 775 (30.51) 180 865 (34.06) 200 950 (37.40) 220 1025 (40.35) 240 C 304 (11.97) 380 (14.96) 465 (18.31) 543 (21.38) 593 (23.35) 675 (26.57) 755 (29.72) 830 (32.68) 905 (35.63) A min 45 55 70 80 90 100 110 115 130 95 (3.74) 115 (4.53) 152 (5.98) 174 (6.85) 194 (7.64) 220 (8.66) 255 (10.04) 280 (11.02) 310 (12.20) B 352 435 535 620 680 775 865 950 1025 F 14.5 (0.57) 17 (0.67) 22 (0.87) 27.5 (1.08) 28 (1.10) 31 (1.22) 37 (1.46) 37 (1.46) 41 (1.61) CK 304 380 465 543 4 (0.16) 593 4 (0.16) 675 5 (0.20) 755 5 (0.20) 830 5 (0.20) 905 L 20 (0.79) 95 19 (0.75) 115 24 (0.94) 152 26 (1.02) 174 30 (1.18) 194 35 (1.38) 220 41 (1.61) 255 45 (1.77) 280 45 (1.77) 310 F 94.5 (3.72) 14,5 122 (4.80) 17 145 (5.71) 22 165 (6.50) 27,5 180 (7.09) 28 205 (8.07) 31 228.5 (9.00) 37 240.5 (9.47) 37 263 (10.35) 41 CO CALTTATOR K 3 3 3 3 4 4 5 5 5 29 (1.14) 37 (1.46) 47 (1.85) 51 (2.00) 58 (2.28) 62 (2.44) 77 (3.03) 83 (3.27) 8 (3.48) WITH LOCKIG L DVIC 20 19 24 26 30 35 41 45 45 SZA CALTTATOR WITHOUT LOCKIG DVIC 29 (1.14) 94,5 37 (1.46) 122 51 (2.00) 145 56 (2.20) 165 64 (2.51) 180 68 (2.67) 205 77 (3.03) 22 83 (3.27) 240,5 8 (3.48) 263 AS0250 AS0470 AS0900 AS1400 AS1900 AS2600 AS3800 AS5100 AS7600 Con calettatore /With locking device 29 37 47 51 58 62 77 83 8 Senza calettatore/without locking device 29 37 51 56 64 68 77 83 8 I 127 (5) 165 (6.49) 205 (8.07) 230 (9.05) 245 (9.64) 275 (10.82) 305 (12,0) 315 (12.4) 360 (14.17) P 11 (0.43) 14 (0.55) 17 (0.67) 20 (0.79) 21 (0.83) 25 (0.98) 28 (1.10) 30 (1.18) 32.5 (1.28) IQ 325 (12.80) 127 408 (16.06) 165 500 (19.69) 205 584 (22.99) 230 640 (25.20) 245 725 (28.54) 275 810 (31.89) 305 890 (35.04) 315 965 (37.99) 360 PR 15 (0.59) 11 18 (0.71) 14 25 (0.98) 17 25 (0.98) 20 30 (1.18) 21 35 (1.38) 25 41 (1.61) 28 45 (1.77) 30 45 (1.77) 32,5 QS 8325 10408 14500 18584 18640 725 810 890 27 965 RT 8 (0.31) 15 10 (0.39) 18 13,5 (0.53) 25 22,5 (0.88) 25 25 (0.98) 30 23,5 (0.92) 35 2 (1.12) 41 25 (0.98) 45 28 (1.10) 45 SU 36.5 (1.44) 8 53,5 (2.10) 10 60,5 (2.38) 14 69,5 (2.73) 18 75 (2.95) 18 85,5 (3.36) 91,5 (3.6) 104 (4.09) 109,5 (4.31) 27 V 8 10 14 14 16 T 8 10 13,5 22,5 25 23,5 2 25 28 1) ax velocità [RP] U 1750 36,5 1500 53,5 1250 60,5 1100 69,5 1000 75 85085,5 750 91,5 700 104 650109,5 1) ax speed [RP] Peso [] V Weight [lb] 26 (57) 8 60 (132) 10 126 (277) 14 170 (374) 14 220 (484) 16 320 (704) 510 (1122) 600 (1320) 700 (1531) Vol. cil. (nuovo) [lt] 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 rpm rpm rpm rpm rpm rpm rpm rpm Cyl. Cap. (new) [in 3 ] (14.25) (32.90) (32.40) (44.17) (65.97) (90.83) (117.11) (139.43) (222.18) Vol. cil. (usurato) [lt] 0.455 0.970 1.035 1.412 2.119 2.923 3.769 4.487 7.801 (1) ax Vel. /ax Speed 1.750 1.500 1.250 1.100 1.000 850 750 700 650 Cyl. Cap. (worn) [in 3 ] (27.78) (59.23) (63.18) (86.13) (129.30) (178.35) (229.97) (273.78) (476.09) Peso /Weight Inerzia Corpo [Kgm 2 ] 0,2526 0.8760 2.34126 4.65170 7.17220 14.71320 25.46510 38.56600 59.33700 (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) (1407.9) Inertia Body [lb-ft 2 ] omento freno [m] 1800 lt 3700 lt 6800 lt 11000 lt 14000 lt 20000 lt 2 lt 38500 lt 48000 lt Vol. cil. uovo Brake /Cyl. torque Cap. ew [lbin] (15,930) 0,233 (32,708) 0,539 (60,110) 0,531 (97,240) 0,724 (123,760) 1,081 (176,800) 1,489 (256,650) 1,919 (340,350) 2,285 (424,800) 3,640 om. Friz. (5,5bar) [m] Vol. cil. Usato /Cyl. Cap. Worn 1500 0,455 0,970 1,035 1,412 12300 2,119 17350 2,923 24700 3,769 32350 4,487 7,801 Clutch torque (80Psi) [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) 1) on per operazioni in colpo singolo (consultare /m2 ns ufficio /m2 tecnico) /m2 /m2 /m2 /m2 /m2 dimensioni - dimensions /m2 in (inches) /m2 1) ot for single stroke operations (consult our engineering) 3 Inerzia Corpo/Inertia Body 0,25 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33

AS-BBT ODALITA' DI FISSAGGIO SULL'ALBRO ODALITY odalità di fissaggio OF O-SHAFT sull albero OUTIG odality of on-shaft mounting 1) Con chiavette a 90 rispetto 2) Con calettatori ai fori di entrata 1) Con aria chiavette a 90o rispetto (interpellare ai fori d entrata ns. ariauff tec.) 1) Keyways at 90o against air inlet holes 1) keyways at 2) 90 Con calettatori against (interpellare 2) with nostri locking uffici tecnici) devices air inlet holes 2) With locking device (contact our our engineering) engineering) extraction bore escluse scluse dalla fornitura fornitura not ot supplied by by us us Foro alimentazione aria aria air feed bore air feed bore P P n 2 no2 a 180o 180 P P n 2 no2 a at 180o 180 AS 0250 AS 0470 AS 0900 AS 1400 AS 1900 AS 2600 AS 3800 AS 5100 AS 7600 AS0250 AS0470 AS0900 AS1400 AS1900 AS2600 AS3800 AS5100 AS7600 A max 80 (3.15) 95 (3.74) 125 (4.92) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) / A min 45 (1.77) 55 (2.17) 70 (2.76) 80 (3.15) 90 (3.54) 100 (3.94) 110 (4.33) 115 (4.53) 130 (5.12) A max B 352 (13.86) 80 437 (17.20) 95 535 (21.06) 125 620 (24.41) 140 680 (26.77) 160 775 (30.51) 180 865 (34.06) 200 950 (37.40) 220 1025 (40.35) 240 A min C 304 (11.97) 45 380 (14.96) 55 465 (18.31) 70 543 (21.38) 80 593 (23.35) 90 675 (26.57) 100 755 (29.72) 110 830 (32.68) 115 905 (35.63) 130 B 95 (3.74) 352 115 (4.53) 437 152 (5.98) 535 174 (6.85) 620 194 (7.64) 680 220 (8.66) 775 255 (10.04) 865 280 (11.02) 950 310 (12.20) 1025 CF 14.5 (0.57) 304 17 (0.67) 380 22 (0.87) 465 27.5 (1.08) 543 28 (1.10) 593 31 (1.22) 675 37 (1.46) 755 37 (1.46) 830 41 (1.61) 905 K 95 115 152 174 4 (0.16) 194 4 (0.16) 220 5 (0.20) 255 5 (0.20) 280 5 (0.20) 310 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) F 14,5 17 22 27,5 28 31 37 37 41 CO CALTTATOR K 29 (1.14) 3 37 (1.46) 3 47 (1.85) 3 51 (2.00) 3 58 (2.28) 4 62 (2.44) 4 77 (3.03) 5 83 (3.27) 5 8 (3.48) 5 WITH LOCKIG DVIC SZA CALTTATOR 94,5 122 145 165 180 205 22 240,5 263 Con calettatore WITHOUT LOCKIG /With locking DVIC device 29 (1.14) 29 37 (1.46) 37 51 (2.00) 47 56 (2.20) 51 64 (2.51) 58 68 (2.67) 62 77 (3.03) 77 83 (3.27) 83 8 (3.48) 8 Senza calettatore/without I locking device 127 (5) 29 165 (6.49) 37 205 (8.07) 51 230 (9.05) 56 245 (9.64) 64 275 (10.82) 68 305 (12.0) 77 315 (12.4) 83 360 (14.17) 8 PI 11 (0.43) 127 14 (0.55) 165 17 (0.67) 205 20 (0.79) 230 21 (0.83) 245 25 (0.98) 275 28 (1.10) 305 30 (1.18) 315 32.5 (1.28) 360 QP 325 (12.80) 11 408 (16.06) 14 500 (19.69) 17 584 (22.99) 20 640 (25.20) 21 725 (28.54) 25 810 (31.89) 28 890 (35.04) 30 965 (27.36) 32,5 R 15 (0.59) 18 (0.71) 25 (0.98) 25 (0.98) 30 (1.18) 35 (1.38) 40 (1.57) 45 (1.77) 45 (1.77) Q 325 408 500 584 640 725 810 890 965 S 8 10 14 18 18 27 R 15 18 25 25 30 35 40 45 45 T 8 (0.31) 11.5 (0.45) 19 (0.75) 22 (0.86) 25 (0.98) 18 (0.71) 2 (1.12) 18 (0.71) 21.5 (0.85) U S 8 10 14 18 18 27 36.5 (1.44) 55 (2.17) 61 (2.40) 69 (2.71) 75 (2.95) 80 (3.15) 91.5 (3.60) 97 (3.82) 103 (4.05) VT 8 8 1011,5 14 19 14 22 16 25 18 2 18 21,5 1) ax velocità U [RP] 36,5 55 61 69 75 80 91,5 97 103 1) ax speed V [RP] 1750 1500 1250 1100 1000 850 750 700 650 8 10 14 14 16 Peso [] Weight [lb] 26 (57) 60 (132) 126 (277) 170 (374) 220 (484) 320 (704) 510 (1122) 600 (1320) 700 (1531) Vol. cil. (nuovo) [lt] 0.233rpm 0.539rpm 0.531rpm 0.724rpm 1.081rpm 1.489 rpm 1.919 rpm 2.285 rpm 3.640 (1) ax Cyl. Vel. Cap. /ax(new) Speed [in 3 ] (14.25) 1750 (32.90) 1500 (32.40) 1250 (44.17) 1100 (65.97) 1000 (90.83) 850 (117.11) 750 (139.43) 700 (222.18) 650 Vol. cil. (usurato) [lt] 0.455 0.970 1.035 1.412 2.119 2.923 3.769 4.487 7.801 Cyl. Cap. (worn) [in 3 ] (27.78) (59.23) (63.18) (86.13) (129.30) (178.35) (229.97) (273.78) (476.09) Peso /Weight 26 60 126 170 220 320 510 600 700 Inerzia Corpo [Kgm 2 ] 0,25 0.87 2.34 4.65 7.17 14.71 25.46 38.56 59.33 (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) (1407.9) Inertia Body [lb-ft 2 ] lt lt lt lt lt lt lt lt lt omento freno [m] 1800 3700 6800 11000 14000 20000 2 38500 48000 Vol. cil. uovo /Cyl. Cap. ew 0,233 0,539 0,531 0,724 1,081 1,489 1,919 2,285 3,640 Brake torque [lbin] (15,930) (32,708) (60,110) (97,240) (123,760) (176,800) (256,650) (340,350) (424,800) Vol. cil. om. Usato Friz. /Cyl.(5,5bar) Cap. Worn[m] 0,455 0,970 1,035 1,412 2,119 2,923 3,769 4,487 7,801 1500 12300 17350 24700 32350 Clutch torque (80Psi) [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) dimensioni - dimensions in (inches) Inerzia 1) ot Corpo/Inertia for single Body stroke operations (consult 0,25 our engineering) 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33 4

SRI SRIS GRUPPO - A COADO PUATICO A AIR ACTUATD - UIT AS-CC AS-XX OODISCO SIGL-DISC AD ODALITA' DI FISSAGGIO SULL'ALBRO ODALITY OF O-SHAFT OUTIG 1) Con chiavette a 90 rispetto 2) Con calettatori ai fori di entrata odalità aria di fissaggio sull albero (interpellare ns. uff tec.) odality of on-shaft mounting 1) keyways at 90 against 2) with locking device air inlet holes 1) Con chiavette a 90o rispetto (contact ai fori d entrata our engineering) aria 1) Keyways at 90o against air inlet holes 2) Con calettatori (interpellare nostri uffici tecnici) 2) With locking device (contact our engineering) xtraction extraction bore bore escluse scluse dalla fornitura fornitura not ot supplied by by us us Foro alimentazione aria aria Air feed boreair feed bore P P n 2 no2 a 180o 180 P P n 2 no2 at a 180o 180 AS0250 AS0470 AS0900 AS1400 AS1900 AS2600 AS3800 AS5100 AS7600 0250 0470 AS AS AS AS 3800 AS 5100 AS 7600 AS 0250 AS 0470 AS 0900 AS 1400 AS 1900 AS 2600 AS 3800 AS 5100 AS 7600 A max 80 (3.15) 95 (3.74) 125 (4.92) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) / A max A min 80 (3.15) 45 95 (1.77) (3.74) 55125 (2.17) (4.92) 70 140 (2.76)(5.51) 80 (3.15) 160 (6.30) 90 (3.54) 180 (7.09) 100 (3.94) 200 (7.87) 110 (4.33) 220 115 (8.66) (4.53) 240 130 (9.45) (5.12) A max 80 95 125 140 160 180 200 220 240 A min C 45 (1.77) 304 55 (11.97) (2.17) 38070 (14.96) (2.76) 465 (18.31) 80 (3.15) 543 (21.38) 90 (3.54) 593 (23.35) 100 (3.94) 675 (26.57) 110 (4.33) 755 (29.72) 115 830 (4.53) (32.68) 130 905 (5.12) (35.63) A min 95 45 (3.74) 11555(4.53) 152 70 (5.98) 174 (6.85) 80 194 (7.64) 90 220 (8.66) 100 255 (10.04) 110 280 (11.02) 115310 (12.20) 130 C 304 (11.97) 380 (14.96) 465 (18.31) 543 (21.38) 593 (23.35) 675 (26.57) 755 (29.72) 830 (32.68) 905 (35.63) C F 14.5 304 (0.57) 17 380(0.67) 22465 (0.87) 27.5 (1.08) 543 28 (1.10) 593 31 (1.22) 675 37 (1.46) 755 37 (1.46) 830 41 (1.61) 95 (3.74) 115 (4.53) 152 (5.98) 174 (6.85) 194 (7.64) 220 (8.66) 255 (10.04) 280 (11.02) 310 (12.20) 905 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) F 14.5 (0.57) CO CALTTATOR 95 17 (0.67) 115 22 (0.87) 152 27.5 (1.08) 174 28 (1.10) 19431 (1.22) 22037 (1.46) 25537 (1.46) 28041 (1.61) 310 29 (1.14) 37 (1.46) 47 (1.85) 51 (2.00) 58 (2.28) 62 (2.44) 77 (3.03) 83 (3.27) 8 (3.48) F 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) WITH LOCKIG DVIC 14,5 17 22 27,5 28 31 37 37 41 CO CALTTATOR SZA CALTTATOR 29 (1.14) 37 29 (1.14) (1.46) 3747 (1.46) (1.85) 51 (2.00) 51 (2.00) 56 (2.20) 58 (2.28) 64 (2.51) 62 (2.44) 68 (2.67) 77 (3.03) 77 (3.03) 83 (3.27) 83 (3.27) 8 8 (3.48) WITH LOCKIG DVIC WITHOUT LOCKIG DVIC 11 (0.43) 14 (0.55) 17 (0.67) 20 (0.79) 21 (0.83) 25 (0.98) 28 (1.10) 30 (1.18) 32.5 (1.28) 94,5 122 145 165 180 205 22 240,5 263 SZA Con CALTTATOR calettatore /With locking Pdevice 29 37 47 51 58 62 77 83 8 29 (1.14) 37 (1.46) 51 (2.00) 56 (2.20) 64 (2.51) 68 (2.67) 77 (3.03) 83 (3.27) 8 (3.48) Senza calettatore/without locking S 8 10 14 18 18 27 WITHOUT LOCKIG DVIC device 29 37 51 56 64 68 77 83 8 390 (15.35) 495 (19.49) 610 (24.02) 695 (27.36) 770 (30.31) 880 (34.65) 970 (38.19) 1100 (43.31) 1180 (46.46) P X 11 (0.43) 14 (0.55) 17 (0.67) 20 (0.79) 21 (0.83) 25 (0.98) 28 (1.10) 30 (1.18) 32.5 (1.28) P Y 449 11 (17.68) 57514(22.64) 708 17 (27.87) 793 (31.22) 20 910 (35.83) 21 1020 (40.16) 25 1130 (44.49) 28 1274 (50.16) 301344 (52.91) 32,5 S 8 10 14 18 18 27 S I 127 (5) 165 (6.49) 205 (8.07) 230 (9.05) 245 (9.64) 275 (10.82) 305 (12.0) 315 (12.4) 360 (14.17) X 390 (15.35) 8 495 (19.49) 10 610 (24.02) 14 695 (27.36) 18 770 (30.31) 18 880 (34.65) 970 (38.19) 1100 (43.31) 1180 (46.46) 27 HH 7 (0.27) 15 (0.59) 21.5 (0.85) 17 (0.66) 32.5 (1.28) 32 (1.26) 26 (1.02) 32 (1.26) 29.5 (1.16) Y X 449 (17.68) 390 575 (22.64) 495 708 (27.87) 610 793 (31.22) 695 910 (35.83) 770 1020 (40.16) 880 1130 (44.49) 970 1274 (50.16) 1100 1344 (52.91) KK 22 (0.87) 32 (1.26) 45 (1.77) 45 (1.77) 60 (2.36) 60 (2.36) 65 (2.56) 75 (2.95) 75 (2.95) 1180 I Y CC127 (5) 165 45 (1.77) (6.49) 65205 (2.56) (8.07) 90 (3.54) 230 (9.05) 90 (3.54) 245 (9.64) 120 (4.72) 275 (10.82) 120 (4.72) 305 (12.0) 130 (5.12) 315150 (12.4) (5.91) 360 150 (14.17) (5.91) 449 575 708 793 910 1020 1130 1274 1344 HH DD 7 (0.27) 8015 (3.15) (0.59) 108 21.5 (4.25) (0.85) 146 (5.75) 17 (0.66) 153 (6.02) 32.5 (1.28) 195 (7.68) 32 (1.26) 207 (8.15) 26 217.5 (1.02)(8.56) 32 223 (1.26) (8.78) 29.5 241.5 (1.16) (9.51) KK I PP22 (0.87) P2* 127 15.5 32 (1.26) (0.61) P2* 21,5 165 45 (0.84) (1.77) P3* 29.5205 45 (1.16) (1.77) P3* 29.5 230 (1.16) 60 (2.36) P4* 39.5 (1.55) 24560 P4* (2.36) 39.5 (1.55) 27565 P4* (2.56) 42,5 (1.67) 305P5* 75 52 (2.95) (2.04) 315 P5* 7553 (2.95) (2.08) 360 CC 1) HHax velocità 45 [RP] (1.77) 65 1750 7 (2.56) 1500 15 90 (3.54) 1250 21,5 90 (3.54) 110017 120 (4.72) 100032,5 120 (4.72) 850 32 130 (5.12) 750 26 150 (5.91) 700 32 150 (5.91) 650 29,5 DD 1) ax speed 80 [RP] (3.15) 108 (4.25) 146 (5.75) 153 (6.02) 195 (7.68) 207 (8.15) 217.5 (8.56) 223 (8.78) 241.5 (9.51) Peso KK [] Weight [lb] 26 22(57) 60 32 (132) 126 (277) 45 170 (374) 45 220 (484) 60 320 (704) 60 510 (1122) 65 600 (1320) 75700 (1531) 75 PP P2* 15.5 (0.61) P2* 21,5 (0.84) P3* 29.5 (1.16) P3* 29.5 (1.16) P4* 39.5 (1.55) P4* 39.5 (1.55) P4* 42,5 (1.67) P5* 52 (2.04) P5* 53 (2.08) Vol. cil. (nuovo) [lt] 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 1) ax velocità [RP] CC 45 65 90 90 120 120 130 150 150 Cyl. Cap. (new) 1750[in 3 ] (14.25) 1500 (32.90) 1250 (32.40) 1100 (44.17) 1000 (65.97) 850 (90.83) 750(117.11) 700 (139.43) (222.18) 650 1) ax speed [RP] DD Vol. cil. (usurato) [lt] 80 0.455 108 0.970 1.035 146 1.412 153 2.119195 2.923 207 3.769 217,5 4.487 223 7.801 241,5 Peso [] Weight [lb] 26 (57) Cyl. PP Cap. (worn) [in 3 60 ] (27.78) (132) (59.23) 126 (277) (63.18) 170 (374) (86.13) 220 (484) (129.30) 320 (704) (178.35) 510 (1122) (229.97) 600 (1320) (273.78) 700 (476.09) (1531) P2*15,5 P2*21,5 P3*29,5 P3*29,5 P4*39,5 P4*39,5 P4*42,5 P5*52 Vol. cil. (nuovo) Inerzia [lt] Corpo 0.233 [Kgm 2 ] 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 0,25 0.87 2.34 4.65 7.17 14.71 25.46 38.56 59.33 P5*53 Cyl. Cap. (new) [in (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) (1407.9) Inertia ] Body (14.25) [lb-ft 2 ] (32.90) (32.40) (44.17) (65.97) (90.83) (117.11) (139.43) (222.18) rpm rpm rpm rpm rpm rpm rpm rpm Vol. cil. (usurato) omento [lt] freno 0.455 [m] 1800 0.970 3700 1.035 68001.412 11000 2.119 14000 2.923 20000 3.7692 4.487 38500 7.801 48000 (1) ax Vel. /ax Speed 1.750 (15,930) 1.500 (32,708) (60,110) 1.250 (97,240) 1.100 (123,760) 1.000 (176,800) 850 (256,650) 750 (340,350) 700 (424,800) 650 Cyl. Cap. (worn) [in Brake ] torque (27.78) [lbin] (59.23) (63.18) (86.13) (129.30) (178.35) (229.97) (273.78) (476.09) om. Friz. (5,5bar) [m] 1500 12300 17350 24700 32350 Inerzia Corpo [Kgm 2 ] 0,25 0.87 (13,270) (27,430) 2.34 (50,880) 4.65 (79,650) 7.17 (108,850) 14.71 (153,540) 25.46 (2190) 38.56 (286,290) 59.33 (405,330) Clutch torque (80Psi) (5.93) [lbin] (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) (1407.9) Inertia Peso /Weight Body [lb-ft 2 ] 1) on per operazioni in colpo singolo 26 (consultare ns ufficio 60 tecnico) 126 (*) dimensioni delle 170piastrine a pagina 220 16 320 dimensioni 510 - dimensions 600in (inches) 700 omento freno 1) [m] ot for single stroke 1800 operations (consult 3700 our engineering) 6800 (*) 11000 keep plate's dimensions 14000 at page 16 20000 2 38500 48000 5 Brake torque [lbin] (15,930) lt (32,708) lt(60,110) lt(97,240) lt(123,760) lt(176,800) lt(256,650) lt(340,350) lt (424,800) lt om. Vol. Friz. cil. uovo (5,5bar) /Cyl. Cap. [m] ew 1500 0,23 0,539 0,531 0,724 12300 1,0817350 1,48924700 1,91932350 2,285 3,640 Clutch Vol. torque cil. Usato (80Psi) (13,270) /Cyl. Cap. [lbin] Worn (27,430) 0,455 (50,880) 0,970 (79,650) 1,035 (108,850) 1,412 (153,540) 2,119 (2190) 2,923 (286,290) 3,769 (405,330) 4,487 7,801 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) (*) dimensioni delle piastrine a pagina 16 dimensioni - dimensions in (inches) 1) ot for single stroke operations (consult our engineering) (*) keep plate's dimensions at page 16 5 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 Inerzia Corpo/Inertia Body 0,25 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33

AS-X1 xtraction extraction bore bore escluse scluse dalla fornitura not ot supplied by us us odalità di fissaggio sull albero odality of on-shaft mounting 1) Con chiavette a 90o rispetto ai fori d entrata aria 1) Keyways at 90o against air inlet holes 2) Con calettatori (interpellare nostri uffici tecnici) 2) With locking device (contact our engineering) P no2 n 2 a 180o a 180 P no2 n 2 a 180o at 180 Foro alimentazione aria aria air Air feed bore bore S e A max 80 (3.15) AS0250 95 (3.74) AS0470 125 (4.92) AS0900 140 (5.51) AS1400160 (6.30) AS1900180 (7.09) AS2600 200 (7.87) AS3800 220 AS5100 (8.66) 240 AS7600 (9.45) A min 45 (1.77) 55 (2.17) 70 (2.76) 80 (3.15) 90 (3.54) 100 (3.94) 110 (4.33) 115 (4.53) 130 (5.12) / C 304 (11.97) 380 (14.96) 465 (18.31) 543 (21.38) 593 (23.35) 675 (26.57) 755 (29.72) 830 (32.68) 905 (35.63) A max 80 95 125 140 160 180 200 220 240 95 (3.74) 115 (4.53) 152 (5.98) 174 (6.85) 194 (7.64) 220 (8.66) 255 (10.04) 280 (11.02) 310 (12.20) A min 45 55 70 80 90 100 110 115 130 F 14.5 (0.57) 17 (0.67) 22 (0.87) 27.5 (1.08) 28 (1.10) 31 (1.22) 37 (1.46) 37 (1.46) 41 (1.61) C 304 380 465 543 593 675 755 830 905 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) 95 115 152 174 194 220 255 280 310 CO CALTTATOR F 29 (1.14) 14,5 37 (1.46) 17 47 (1.85) 2251 (2.00) 27,5 58 (2.28) 28 62 (2.44) 31 77 (3.03) 37 83 (3.27) 37 8 (3.48) 41 WITH LOCKIG DVIC 94,5 122 145 165 180 205 22 240,5 263 SZA CALTTATOR Con calettatore /With locking 29 device (1.14) 37 29 (1.46) 37 51 (2.00) 4756 (2.20) 51 64 (2.51) 58 68 (2.67) 62 77 (3.03) 77 83 (3.27) 83 8 (3.48) 8 WITHOUT LOCKIG DVIC Senza calettatore/without locking device 29 37 51 56 64 68 77 83 8 P 11 (0.43) 14 (0.55) 17 (0.67) 20 (0.79) 21 (0.83) 25 (0.98) 28 (1.10) 30 (1.18) 32.5 (1.28) P 11 14 17 20 21 25 28 30 32,5 S 8 10 14 18 18 27 S 8 10 14 18 18 27 X 390 (15.35) 495 (19.49) 610 (24.02) 695 (27.36) 770 (30.31) 880 (34.65) 970 (38.19) 1100 (43.31) 1180 (46.46) X 390 495 610 695 770 880 970 1.100 1.180 Y 449 (17.68) 575 (22.64) 708 (27.87) 793 (31.22) 910 (35.83) 1020 (40.16) 1130 (44.49) 1274 (50.16) 1344 (52.91) Y 449 575 708 793 910 1.020 1.130 1.274 1.344 I 127 (5) 165 (6.49) 205 (8.07) 230 (9.05) 245 (9.64) 275 (10.82) 305 (12.0) 315 (12.4) 360 (14.17) I 127 165 205 230 245 275 305 315 360 HH 7 (0.27) 15 (0.59) 21.5 (0.85) 17 (0.66) 32.5 (1.28) 32 (1.26) 26 (1.02) 32 (1.26) 29.5 (1.16) HH 7 15 21,5 17 32,5 32 26 32 29,5 KK 22 (0.87) 32 (1.26) 45 (1.77) 45 (1.77) 60 (2.36) 60 (2.36) 65 (2.56) 75 (2.95) 75 (2.95) KK 22 32 45 45 60 60 65 75 75 CC 45 (1.77) 65 (2.56) 90 (3.54) 90 (3.54) 120 (4.72) 120 (4.72) 130 (5.12) 150 (5.91) 150 (5.91) CC 45 65 90 90 120 120 130 150 150 PP P2* 15.5 (0.61) P2* 21.5 (0.84) P3* 29.5 (1.16) P3* 29.5 (1.16) P4* 39.5 (1.55) P4* 39.5 (1.55) P4* 42.5 (1.67) P5* 52 (2.04) P5* 53 (2.08) PP P2*15,5 P2*21,5 P3*29,5 P3*29,5 P4*39,5 P4*39,5 P4*42,5 P5*52 P5*53 XX 490 (19.29) 635 (25.00) 790 (31.10) 885 (34.84) 990 (38.98) 1135 (44.68) 1235 (48.62) 1450 (57.09) 1525 (60.04) XX 490 635 790 885 990 1135 1235 1450 1525 YY 533 (20.98) 700 (27.56) 870 (34.25) 967 (38.07) 1102 (43.39) 1255 (49.41) 1369 (53.90) 1610 (63.39) 1674 (65.91) YY 533 700 870 967 1102 1255 1369 1610 1674 QQ P1* 10.5 (0.41) P2* 20 (0.79) P2* 21,5 (0.84) P2* 21.5 (0.84) P3* 29.5 (1.16) P3* 29.5 (1.16) P4* 37.5 (1.47) P4* 43 (1.67) P4* 40 (1.57) QQ P1*10,5 P2*20 P2*21,5 P2*21,5 P3*29,5 P3*29,5 P4*37,5 P4*43 P4*40 16 (0.63) 30 (1.18) 32 (1.26) 32 (1.26) 45 (1.77) 45 (1.77) 55 (2.17) 65 (2.56) 65 (2.56) 16 30 32 32 45 45 55 65 65 FF 28 (1.10) 60 (2.36) 65 (2.56) 65 (2.56) 90 (3.54) 90 (3.54) 110 (4.33) 130 (5.12) 130 (5.12) FF 28 60 65 65 90 90 110 130 130 GG 41 (1.61) 52,5 (2.06) 77 (3.03) 84 (3.31) 91 (3.58) 106 (4.17) 106.5 (4.19) 108 (4.25) 123 (4.84) GG 41 52,5 77 84 91 106 106,5 108 123 1) ax velocità [RP] 1750 1500 1250 1100 1000 850 750 700 650 1) ax speed [RP] rpm rpm rpm rpm rpm rpm rpm rpm Peso [] (1) ax Weight Vel. /ax[lb] Speed 26 (57) 1.750 60 (132) 1.500 126 (277) 1.250 170 (374) 1.100220 (484) 1.000 320 (704) 850 510 (1122) 750 600 (1320) 700 700 (1531) 650 Vol. cil. (nuovo) [lt] 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 Cyl. Cap. (new) [in 3 ] (14.25) (32.90) (32.40) (44.17) (65.97) (90.83) (117.11) (139.43) (222.18) Peso /Weight 26 60 126 170 220 320 510 600 700 Vol. cil. (usurato) [lt] 0.455 0.970 1.035 1.412 2.119 2.923 3.769 4.487 7.801 Cyl. Cap. (worn) [in 3 ] (27.78) (59.23) lt lt(63.18) lt (86.13) lt (129.30) lt (178.35) lt (229.97) lt (273.78) lt (476.09) lt Inerzia Vol. Corpo cil. uovo [Kgm /Cyl. 2 Cap. ] ew 0,25 0,233 0.87 0,5392.34 0,531 4.65 0,724 7.17 1,081 14.71 1,489 25.461,919 38.56 2,285 59.33 3,640 (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) (1407.9) Inertia Vol. Body cil. Usato [lb-ft /Cyl. 2 ] Cap. Worn 0,455 0,970 1,035 1,412 2,119 2,923 3,769 4,487 7,801 omento freno [m] 1800 3700 6800 11000 14000 20000 2 38500 48000 Brake torque [lbin] (15,930) /m2 (32,708) /m2 (60,110) /m2 (97,240) /m2(123,760) /m2 (176,800) /m2 (256,650) /m2 (340,350) /m2 (424,800) /m2 Inerzia Corpo/Inertia Body 0,25 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33 om. Friz. (5,5bar) [m] 1500 12300 17350 24700 32350 Clutch torque (80Psi) [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) (*) dimensioni delle piastrine a pagina 16 dimensioni - dimensions in (inches) 1) ot for single stroke operations (consult our engineering) (*) keep plate's dimensions at page 16 6

SRI DS-BBL SRIS GRUPPO - A COADO PUATICO AIR ACTUATD - UIT OODISCO SIGL-DISC AD ODALITA' DI FISSAGGIO SULL'ALBRO ODALITY OF O-SHAFT OUTIG odalità di fissaggio sull albero 1) Con chiavette ODALITA' odality a 90 DI rispetto of FISSAGGIO on-shaft mounting 2) SULL'ALBRO Con calettatori ai fori di entrata ODALITY aria OF O-SHAFT (interpellare OUTIG ns. uff tec.) 1) Con chiavette a 90o rispetto ai fori d entrata aria 1) keyways Con chiavette at 90 1) a against Keyways 90 rispetto at 90o 2) against with locking 2) air Con inlet holes calettatori devices air fori inlet di holes entrata aria (contact (interpellare our engineering) ns. uff tec.) 2) Con calettatori (interpellare nostri uffici tecnici) 1) keyways at 90 against 2) with locking devices air inlet holes 2) With locking (contact device (contact our engineering) our engineering) extraction bore bore extraction bore scluse escluse dalla dalla fornitura fornitura P n 2 a 180 Foro Foro alimentazione t i aria aria ot supplied not supplied by us by us P n 2 at 180 air air feed bore escluse dalla fornitura P n 2 a 180 Foro alimentazione i aria not supplied by us P n 2 at 180 air feed bore DS 0250 DS 0470 DS 0900 DS 1400 DS 1900 DS 2600 DS 3800 DS 5100 DS 7600 A max 80 (3.15) 95 (3.74) 125 (4.92) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) DS 0250 DS 0470 DS 0900 DS 1400 DS 1900 DS 2600 DS 3800 DS 5100 DS 7600 A min 45 (1.77) AS0250 55 (2.17) AS0470 70 (2.76) AS0900 80 (3.15) AS1400 90 (3.54) AS1900 100 (3.94) AS2600 110 (4.33) AS3800 115 AS5100 (4.53) 130 AS7600 (5.12) A max B 352 80 (3.15) (13.86) 435 95 (3.74) (17.13) 125 535 (4.92) (21.06) 140 620 (5.51) (24.41) 160 680 (6.30) (26.77) 180 775 (7.09) (30.51) 865 200 (7.87) (34.06) 220 950 (8.66) (37.40) 1025 240 (9.45) (40.35) / A Cmin 304 45 (1.77) (11.97) 380 55 (2.17) (14.96) 465 70 (2.76) (18.31) 543 80 (3.15) (21.38) 593 90 (3.54) (23.35) 100 675 (3.94) (26.57) 755 110 (4.33) (29.72) 115 830 (4.53) (32.68) 130 905 (5.12) (35.63) A B max 352 95 (13.86) (3.74) 80 435 115 (17.13) (4.53) 95 535 152 (21.06) (5.98) 125 620 174 (24.41) (6.85) 140 680 194 (26.77) (7.64) 160 775 220 (30.51) (8.66) 180 865 255 (34.06) (10.04) 200 950 280 (37.40) (11.02) 220 1025 310 (40.35) (12.20) 240 A CF min 14.5 304 (11.97) (0.57) 45 380 17 (14.96) (0.67) 55 465 22 (18.31) (0.87) 70 27.5 543 (21.38) (1.08) 80 593 28 (23.35) (1.10) 90 675 31 (26.57) (1.22) 100 755 37 (29.72) (1.46) 110 830 37 (32.68) (1.46) 115 905 41 (35.63) (1.61) 130 K 953 (3.74) (0.12) 1153 (4.53) (0.12) 1523 (5.98) (0.12) 1743 (6.85) (0.12) 1944 (7.64) (0.16) 2204 (8.66) (0.16) 2555 (10.04) (0.20) 2805 (11.02) (0.20) 3105 (12.20) (0.20) B 352 435 535 620 680 775 865 950 1025 FL 14.5 20 (0.57) (0.79) 17 19 (0.67) (0.75) 22 24 (0.87) (0.94) 27.5 26 (1.08) (1.02) 28 30 (1.10) (1.18) 31 35 (1.22) (1.38) 37 41 (1.46) (1.61) 37 45 (1.46) (1.77) 41 45 (1.61) (1.77) C 304 380 465 543 593 675 755 830 905 K 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 4 (0.16) (7.09) 205 4 (0.16) (8.07) 228.55 (0.20) (9.00) 240.55 (0.20) (9.47) 263 5 (0.20) (10.35) L 39 20 (0.79) (1.53) 95 54.5 19 (0.75) (2.15) 115 59.5 24 (0.94) (2.34) 152 66.5 26 (1.02) (2.62) 174 72.5 30 (1.18) (2.85) 194 83.5 35 (1.38) (3.29) 220 94 41 (1.61) (3.70) 255 103 45 (1.77) (4.06) 280 116 45 (1.77) (4.57) 310 I F 94.5 127 (3.72) (5) 14.5 194.5 122 (4.80) (7.65) 17 145 244 (5.71) (9.6) 22 165 287 (6.50) (11.29) 27.5 180 313 (7.09) (12.32) 28 205 378 (8.07) (14.88) 31 228.5 423 (9.00) (16.65) 37 240.5 471 (9.47) (18.54) 37 263 487 (10.35) (19.17) 41 P K 39 11 (1.53) (0.43) 3 54.5 14 (2.15) (0.55) 3 59.5 17 (2.34) (0.67) 3 66.5 20 (2.62) (0.79) 3 72.5 21 (2.85) (0.83) 4 83.5 25 (0.98) (3.29) 4 94 28 (1.10) (3.70) 5 103 30 (1.18) (4.06) 5 32.5 116 (1.28) (4.57) 5 QI L 325 127 (12.80) (5) 20 194.5 408 (16.06) (7.65) 19 500 244 (19.69) (9.6) 24 584 287 (22.99) (11.29) 26 640 313 (12.32) (25.20) 30 725 378 (14.88) (28.54) 35 810 423 (16.65) (31.89) 41 890 471 (18.54) (35.04) 45 965 487 (19.17) (37.99) 45 RP 11 15 (0.43) (0.59) 94.5 14 18 (0.55) (0.71) 122 17 25 (0.67) (0.98) 145 20 25 (0.79) (0.98) 165 21 30 (0.83) (1.18) 180 35 25 (0.98) (1.38) 205 28 41 (1.10) (1.61) 228.5 30 45 (1.18) (1.77) 240.5 32.5 45 (1.28) (1.77) 263 QS 325 8(12.80) 408 10 (16.06) 500 14 (19.69) 584 18 (22.99) 640 18 (25.20) 725 (28.54) 810 (31.89) 890 (35.04) 965 27 (37.99) 39 54.5 59.5 66.5 72.5 83.5 94 103 116 RT 158 (0.59) (0.31) 187 (0.71) (0.27) 13,5 25 (0.98) (0.53) 22,5 25 (0.98) (0.88) 30 25 (1.18) (0.98) 23,5 35 (1.38) (0,92) 91,5 41 (1.61) (3.60) 45 25 (1.77) (0.98) 45 28 (1.77) (1.10) I 127 194.5 244 287 313 378 423 471 487 US 36.5 8(1.44) 53,5 10 (2.10) 60,5 14 (2.38) 69,5 18 (2.73) 75 18 (2.95) 85,5 (3.36) 2 (1.12) 140 (5.51) 109,5 27 (4.31) VT P 8 8(0.31) 11 10 7 (0.27) 14 13,5 14 (0.53) 17 22,5 14 (0.88) 20 25 16 (0.98) 21 23,5 (0,92) 25 91,5 (3.60) 28 25 (0.98) 30 28 (1.10) 32.5 1) ax velocità UQ [RP] 36.5 (1.44) 325 53,5 (2.10) 408 60,5 (2.38) 500 69,5 (2.73) 584 75 (2.95) 640 85,5 (3.36) 725 2 (1.12) 810 140 (5.51) 890 109,5 (4.31) 965 1) ax speed VR [RP] 1750 1500 1250 1100 1000 850 750 700 650 8 15 10 18 14 25 14 25 16 30 35 41 45 45 Peso 1) ax [] velocità SWeight [RP] [lb] 26 (57) 1750 8 60 (132) 150010 126 (277) 125014 170 (374) 110018 220 (484) 100018 320 (704) 850 510 (1122) 750 600 (1320) 700 700 (1531) 65027 1) Vol. ax cil. speed (nuovo) [RP] [lt] 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 T 8 7 13,5 22,5 25 23,5 91,5 25 28 Peso Cyl. Cap. [] (new) Weight [in[lb] 26 (57) 60 (132) 126 (277) 170 (374) 220 (484) 320 (704) 510 (1122) 600 (1320) 700 (1531) U ] (14.25) (32.90) (32.40) (44.17) (65.97) (90.83) (117.11) (139.43) (222.18) 36.5 53,5 60,5 69,5 75 85,5 2 140 109,5 Vol. cil. (usurato) (nuovo) [lt] [lt] 0.233 0.455 0.539 0.970 0.531 1.035 0.724 1.412 1.081 2.119 1.489 2.923 1.919 3.769 2.285 4.487 3.640 7.801 V 8 10 14 14 (65.97) 16 Cyl. Cap. (new) (worn) [in 3 ] (14.25) (27.78) (32.90) (59.23) (32.40) (63.18) (44.17) (86.13) (129.30) (178.35) (90.83) (117.11) (229.97) (139.43) (273.78) (222.18) (476.09) Inerzia Vol. cil. Corpo (usurato) [Kgm[lt] 2 ] 0.455 0,25 0.970 0.87 1.035 2.34 1.412 4.65 2.119 7.17 14.71 2.923 25.46 3.769 38.56 4.487 7.801 rpm rpm rpm rpm rpm rpm rpm rpm Cyl. Cap. (worn) [in 3 59.33 (1407.9) Inertia Body [lb-ft 2 ] ] (27.78) (5.93) (59.23) (20.65) (63.18) (55.53) (110.34) (86.13) (129.30) (170.14) (178.35) (349.07) (229.97) (604.17) (273.78) (915.03) (476.09) (1) ax Vel. /ax Speed 1.750 1.500 1.250 1.100 1.000 850 750 700 650 Inerzia omento Corpo freno [Kgm [m] 2 ] 1800 0,25 3700 0.87 6800 2.34 11000 4.65 14000 7.17 20000 14.71 2 25.46 38500 38.56 48000 59.33 (1407.9) Inertia Brake torque Body [lb-ft [lbin] 2 ] (15,930) (5.93) (32,708) (20.65) (60,110) (55.53) (97,240) (110.34) (123,760) (170.14) (176,800) (349.07) (256,650) (604.17) (340,350) (915.03) (424,800) om. omento Friz. (5,5bar) freno [m] [m] 1800 1500 3700 6800 11000 14000 12300 20000 17350 2 24700 38500 32350 48000 Peso /Weight 26 60 126 170 220 320 510 600 700 Clutch Brake torque torque (80Psi) [lbin] [lbin] (13,270) (15,930) (32,708) (27,430) (60,110) (50,880) (97,240) (79,650) (123,760) (108,850) (176,800) (153,540) (256,650) (2190) (340,350) (286,290) (424,800) (405,330) 1) om. on per Friz. operazioni (5,5bar) in colpo [m] singolo 1500 (consultare ns ufficio lt tecnico) lt lt lt 12300 lt 17350 lt 24700 dimensioni lt 32350 - dimensions in lt (inches) lt 1) Clutch ot for torque single (80Psi) stroke operations [lbin] (consult (13,270) our engineering) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) 7 Vol. cil. uovo /Cyl. Cap. ew 0,233 0,539 0,531 0,724 1,081 1,489 1,919 2,285 3,640 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) dimensioni - dimensions in (inches) Vol. cil. Usato /Cyl. Cap. Worn 0,455 0,970 1,035 1,412 2,119 2,923 3,769 4,487 7,801 1) ot for single stroke operations (consult our engineering) 7 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 Inerzia Corpo/Inertia Body 0,25 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33

SRI SRIS DS-TT GRUPPO - A COADO PUATICO AIR ACTUATD - UIT OODISCO SIGL-DISC AD DS-BBT ODALITA' DI FISSAGGIO SULL'ALBRO ODALITY OF O-SHAFT OUTIG 1) Con chiavette a 90 rispetto 2) Con calettatori ai fori di entrata aria (interpellare ns. uff tec.) 1) keyways odalità at 90 di against fissaggio sull albero 2) with locking devices air inlet holes ODALITA' odality of on-shaft DI FISSAGGIO mounting SULL'ALBRO ODALITY OF O-SHAFT (contact OUTIG our engineering) 1) Con chiavette a 90o rispetto ai fori d entrata aria 1) Con chiavette 1) Keyways a 90 rispetto at 90o against air inlet 2) Con holes calettatori ai fori di entrata aria (interpellare ns. uff tec.) 2) Con calettatori (interpellare nostri uffici tecnici) 1) keyways at 90 against 2) with locking devices air inlet holes 2) With locking device (contact our our engineering) engineering) extraction bore bore extraction bore escluse scluse dalla fornitura not ot supplied by us by us escluse dalla fornitura not supplied by us P no2 n 2 a 180o a 180 Pn 2 P no2 a 180o at 180 Pn 2 at 180 Foro alimentazione aria aria air feed bore bore Foro alimentazione aria air feed bore AS0250 AS0470 AS0900 AS1400 AS1900 AS2600 AS3800 AS5100 AS7600 DS 0250 DS 0470 DS 0900 DS 1400 DS 1900 DS 2600 DS 3800 DS 5100 DS 7600 / A max Amax 80 DS (3.15) 0250 80 95 DS (3.74) 0470 DS 95 125 0900 (4.92) DS 125 1401400 (5.51) DS 140 160 1900 160 (6.30) DS 2600 180 180(7.09) DS 3800 200 (7.87) DS 5100 220 220 (8.66) DS 7600 240 240 (9.45) A mina Amin max 45 (1.77) 80 (3.15) 45 55 95 (2.17) (3.74) 55 70 125 (2.76) (4.92) 70 140 80 (5.51) (3.15) 80 16090 (6.30) (3.54) 90 180100 (7.09) (3.94) 100 200 (7.87) 110 (4.33) 220 (8.66) 115 (4.53) 115 240130 (9.45) 130 (5.12) B A min B 352 (13.86) 45 (1.77) 352 437 55 (17.20) (2.17) 437 53570 (21.06) (2.76) 535 620 80 (3.15) (24.41) 620 90 680 (3.54) (26.77) 680 100775 (3.94) (30.51) 775 110 (4.33) 865 (34.06) 115 (4.53) 950 (37.40) 950 1301025 (5.12) 1025 (40.35) C B C 304 352 (11.97) (13.86) 304 380437 (14.96) (17.20) 380 465 535 (18.31) (21.06) 465 620 543 (24.41) (21.38) 543 680 593 (26.77) (23.35) 593 775 675 (30.51) (26.57) 865 (34.06) 755 (29.72) 950 (37.40) 830 (32.68) 1025 (40.35) 905 (35.63) 675 830 905 C 95 304 (3.74) (11.97) 115380 (4.53) (14.96) 152 465 (5.98) (18.31) 543 174 (21.38) (6.85) 593 194 (23.35) (7.64) 675220 (26.57) (8.66) 755 (29.72) 255 (10.04) 830 (32.68) 280 (11.02) 905 (35.63) 310 (12.20) 95 115 152 174 194 220 255 280 310 F 14.5 (0.57) 95 (3.74) 17115 (0.67) (4.53) 22 152 (0.87) (5.98) 27.5 174 (6.85) (1.08) 19428 (7.64) (1.10) 220 (8.66) 31 (1.22) 255 (10.04) 37 (1.46) 280 (11.02) 37 (1.46) 310 (12.20) 41 (1.61) F 14,5 17 22 27,5 28 31 37 37 41 14.5 (0.57) 17 (0.67) 22 (0.87) 27.5 (1.08) 28 (1.10) 31 (1.22) 37 (1.46) 37 (1.46) 41 (1.61) K F 4 (0.16) 4 (0.16) 5 (0.20) 5 (0.20) 5 (0.20) K 3 3 3 3 4 4 5 5 4 (0.16) 4 (0.16) 5 (0.20) 5 (0.20) 5 (0.20) 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) 94.5 (3.72) 94,5 122 (4.80) 122 145 (5.71) 145 165 (6.50) 165 180 (7.09) 180 205 (8.07) 205 228.522 (9.00) 240.5240,5 (9.47) 263 263 (10.35) 39 (1.53) 54.5 (2.15) 59.5 (2.34) 66.5 (2.62) 72.5 (2.85) 83.5 (3.29) 94 (3.70) 103 (4.06) 116 (4.57) 39 (1.53) 39 54.5 (2.15) 54,5 59.5 (2.34) 59,5 66.5 (2.62) 66,5 72.5 72,5 (2.85) 83.5 83,5 (3.29) 94 (3.70) 94 103 (4.06) 103 116 116 (4.57) I 127 (5) 194.5 (7.65) 244 (9.6) 287 (11,29) 313 (12.32) 378 (14.88) 423 (16.65) 471 (18.54) 487 (19.17) II 127 (5) 127 194.5 194,5 (7.65) 244 (9.6) 244 287 (11,29) 287 313 (12.32) 313 378 (14.88) 378 423 (16.65) 423 471 (18.54) 471 487 487 (19.17) P 11 (0.43) 14 (0.55) 17 (0.67) 20 (0.79) 21 (0.83) 25 (0.98) 28 (1.10) 30 (1.18) 32.5 (1.28) P 11 (0.43) 11 14 (0.55) 14 17 (0.67) 17 20 (0.79) 20 21 (0.83) 21 25 (0.98) 25 28 (1.10) 28 30 (1.18) 30 32.532,5 (1.28) Q Q 325 325 (12.80) (12.80) 408 408 (16.06) (16.06) 500 500 (19.69) 584 584 (22.99) (22.99) 640 640 (25.20) (25.20) 725 725 (28.54) (28.54) 810 (31.89) 810 (31.89) 890 (35.04) 890 (35.04) 965 (37.99) 965 (37.99) 325 408 500 584 640 725 810 890 965 R R 15 (0.59) 15 (0.59) 18 18 (0.71) (0.71) 25 25 (0.98) 25 (0.98) 30 30 (1.18) (1.18) 35 (1.38) 35 (1.38) 40 (1.57) 40 (1.57) 45 (1.77) 45 (1.77) 45 (1.77) 45 (1.77) R 15 18 25 25 30 35 40 45 45 S S 8 8 10 10 14 18 18 18 27 27 S 8 10 14 18 18 27 T T 8 (0.31) 8 (0.31) 11.5 11.5 (0.45) 19 19 (0.75) 22 (0.86) 25 25 (0.98) (0.98) 18 (0.71) 18 (0.71) 28.5 (1.12) 28.5 (1.12) 18 (0.71) 18 (0.71) 21.5 (0.85) 21.5 (0.85) UT 8 11,5 19 22 25 18 2 18 21,5 U 36.5 36.5 (1.44) (1.44) 55 55 (2.17) (2.17) 61 61 (2.40) 69 (2.71) 75 75 (2.95) (2.95) 80 (3.15) 80 (3.15) 91.5 91.5 (3.60) (3.60) 97 (3.82) 97 (3.82) 103 (4.05) 103 (4.05) VU 8 36,5 10 55 14 61 14 69 1675 80 91,5 97 103 V 8 10 14 14 16 1) ax velocità V [RP] 8 10 14 14 16 1) ax velocità [RP] 1750 1500 1250 1100 1000 850 750 700 650 1) ax speed [RP] 1750 1500 1250 1100 1000 850 750 700 650 1) ax speed [RP] Peso [] Weight [lb] 26 (57) rpm 60 (132) rpm 126 (277) rpm 170 (374) rpm 220 (484) rpm 320 (704) rpm 510 (1122) rpm 600 (1320) rpm 700 (1531) Peso (1)[] ax Vol. Vel. Weight cil. /ax (nuovo) Speed [lb] 26 (57) [lt] 0.2331.750 60 (132) 0.5391.500 126 (277) 0.531 1.250 170 (374) 0.724 1.100 220 1.081 1.000 (484) 320 1.489 850 (704) 510 1.919 750 (1122) 2.285 700 600 (1320) 3.640 650700 (1531) Vol. cil. (nuovo) [lt] Cyl. Cap. (new) [in 3 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 ] (14.25) (32.90) (32.40) (44.17) (65.97) (90.83) (117.11) (139.43) (222.18) Cyl. Cap. Vol. (new) cil. (usurato) [in 3 ] [lt] (14.25) 0.455 (32.90) 0.970 (32.40) 1.035 (44.17) 1.412 2.119 (65.97) 2.923 (90.83) 3.769 (117.11) 4.487(139.43) 7.801 (222.18) Vol. Peso cil. /Weight 26 60 126 170 220 320 510 600 700 Cyl. (usurato) Cap. (worn) [lt] [in 3 ] 0.455 (27.78) 0.970 (59.23) 1.035 (63.18) (86.13) 1.412 (129.30) 2.119 (178.35) 2.923 (229.97) 3.769 (273.78) 4.487 (476.09) 7.801 Cyl. Cap. Inerzia (worn) Corpo [in 3 [Kgm ] 2 ] (27.78) 0,25 (59.23) lt 0.87 (63.18) lt 2.34 (86.13) lt 4.65 lt 7.17 (129.30) lt 14.71 (178.35) lt 25.46 (229.97) lt 38.56 (273.78) (476.09) lt 59.33 (1407.9) lt (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) Inerzia Vol. cil. Inertia Corpo uovo /Cyl. Body [Kgm Cap. [lb-ft ew ] 2 ] 0,25 0,233 0.87 0,539 2.340,531 4.65 0,724 1,081 7.17 1,489 14.71 1,919 25.46 2,28538.56 3,640 59.33 (1407.9) Inertia omento freno [m] 1800 3700 6800 11000 14000 20000 2 38500 48000 Vol. cil. Body Usato /Cyl. [lb-ft Cap. ] (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) Worn 0,455 0,970 1,035 1,412 2,119 2,923 3,769 4,487 7,801 Brake torque [lbin] (15,930) (32,708) (60,110) (97,240) (123,760) (176,800) (256,650) (340,350) (424,800) omento freno [m] 1800 3700 6800 11000 14000 20000 2 38500 48000 om. Friz. (5,5bar) [m] 1500 /m2 /m2 /m2 /m2 12300 /m2 17350 /m2 24700 /m2 32350 /m2 Brake torque [lbin] (15,930) (32,708) (60,110) (97,240) (123,760) (176,800) (256,650) (340,350) /m2(424,800) Clutch torque (80Psi) [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) om. Inerzia Friz. Corpo/Inertia (5,5bar) Body [m] 0,25 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33 1500 12300 17350 24700 32350 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) dimensioni - dimensions in (inches) Clutch 1) torque ot for (80Psi) single stroke [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) operations (consult our engineering) 8 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) dimensioni - dimensions in (inches) 1) ot for single stroke operations (consult our engineering) 8

DS-XX SRI SRIS DS-CC GRUPPO - A COADO PUATICO AIR ACTUATD - UIT OODISCO SIGL-DISC AD ODALITA' DI FISSAGGIO SULL'ALBRO odalità ODALITY di ODALITA' fissaggio OF sull albero O-SHAFT DI FISSAGGIO OUTIG SULL'ALBRO odality of ODALITY on-shaft mounting OF O-SHAFT OUTIG 1) Con chiavette a 90 rispetto 2) Con calettatori ai fori 1) di 1) Con entrata Con chiavette aria a 90o 90 rispetto ai (interpellare fori d entrata 2) Con aria ns. calettatori uff tec.) ai fori di entrata aria (interpellare ns. uff tec.) 1) keyways 1) Keyways at 90 at against 90o against air 2) inlet with holes locking devices air inlet 1) keyways holes at 90 against (contact 2) with our locking engineering) devices air 2) inlet Con holes calettatori (interpellare nostri (contact uffici our tecnici) engineering) 2) With locking device (contact our engineering) escluse scluse dalla dalla escluse fornitura fornitura dalla fornitura ot not supplied supplied by not us by supplied us by us extraction xtraction extraction bore bore P n 2 a 180 Foro alimentazione i aria P no2 n 2 a 180o a 180 Foro alimentazione t aria i aria P n 2 at 180 air feed bore P no2 n 2 a at 180o 180 air Air feed bore bore AS0250 DS 0250 AS0470 DS 0470 AS0900DS 0900AS1400 DS 1400 AS1900 DS 1900 AS2600 DS 2600 DS AS3800 DS AS5100 DS AS7600 DS 0250 DS 0470 DS 0900 DS 1400 DS 1900 DS 2600 DS 3800 DS 5100 DS 7600 A max 80 (3.15) 95 (3.74) 125 (4.92) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) / A max A min 80 (3.15) 45 (1.77) 95 (3.74) 55 (2.17) 125 (4.92) 70 (2.76) 140 (5.51) 80 (3.15) 160 (6.30) 90 (3.54) 180 (7.09) 100 (3.94) 200 (7.87) 110 (4.33) 220 115 (8.66) (4.53) 240130 (9.45) (5.12) Amax A min C 45 (1.77) 80 304 (11.97) 55 (2.17) 95380 (14.96) 70 (2.76) 125 465 (18.31) 80 (3.15) 140 543 (21.38) 90 (3.54) 593 160(23.35) 100 (3.94) 675180 (26.57) 110 (4.33) 755 (29.72) 200 115 830 (4.53) (32.68) 220 130905 (5.12) (35.63) 240 Amin C 304 (11.97) 45 95 (3.74) 380 (14.96) 55115 (4.53) 465 (18.31) 70 152 (5.98) 543 (21.38) 174 80 (6.85) 593 (23.35) 19490(7.64) 675 (26.57) 220100 (8.66) 755 (29.72) 305 (12.01) 110 830 280 (32.68) (11.02) 115 905310 (35.63) (12.20) 130 C F 95 (3.74) 14.5 (0.57) 115 (4.53) 17 (0.67) 152 (5.98) 22 (0.87) 174 (6.85) 27.5 (1.08) 194 (7.64) 28 (1.10) 220 (8.66) 31 (1.22) 305 (12.01) 37 (1.46) 280 (11.02) 37 (1.46) 310 41 (12.20) (1.61) 304 380 465 543 593 675 755 830 905 F 14.5 (0.57) 94.5 (3.72) 17 (0.67) 122 (4.80) 22 (0.87) 145 (5.71) 27.5 (1.08) 165 (6.50) 28 (1.10) 180 (7.09) 31 (1.22) 205 (8.07) 37228.5 (1.46) (9.00) 37 240.5 (1.46) (9.47) 41263 (1.61) (10.35) 95 115 152 174 194 220 305 280 310 94.5 (3.72) 39 (1.53) 122 (4.80) 54.5 (2.15) 145 (5.71) 59.5 (2.34) 165 (6.50) 66.5 (2.62) 180 (7.09) 72.5 (2.85) 205 (8.07) 83.5 (3.29) 228.5 (9.00) 94 (3.70) 240.5 103 (9.47) (4.06) 263 116 (10.35) (4.57) F P 14,5 11 (0.43) 17 14 (0.55) 2217 (0.67) 27,5 20 (0.79) 2128(0.83) 25 (0.98) 31 28 (1.10) 37 30 (1.18) 37 32.5 (1.28) 41 39 (1.53) 54.5 (2.15) 59.5 (2.34) 66.5 (2.62) 72.5 (2.85) 83.5 (3.29) 94 (3.70) 103 (4.06) 116 (4.57) P S 1194,5 (0.43) 8 14 (0.55) 122 10 14 17 (0.67) 145 18 20 (0.79) 165 18 21 (0.83) 180 25 (0.98) 205 28 (1.10) 22 27 30 (1.18) 240,532.5 (1.28) 263 X 390 (15.35) 495 (19.49) 610 (24.02) 695 (27.36) 770 (30.31) 880 (34.65) 970 (38.19) 1100 (43.31) 1180 (46.46) S 839 10 54,5 1459,5 1866,5 18 72,5 83,5 94 103 27 116 Y 449 (17.68) 575 (22.64) 708 (27.87) 793 (31.22) 910 (35.83) 1020 (40.16) 1130 (44.49) 1274 (50.16) 1344 (52.91) 390 (15.35) 495 (19.49) 610 (24.02) 695 (27.36) 770 (30.31) 880 (34.65) 970 (38.19) 1100 (43.31) 1180 (46.46) P X I 11 127 (5) 14194.5 (7.65) 17244 (9.6) 287 20 (11.29) 31321(12.32) 378 (14.88) 25 423 (16.65) 28 471 (18.54) 30 487 (19.17) 32,5 Y 449 (17.68) 575 (22.64) 708 (27.87) 793 (31.22) 910 (35.83) 1020 (40.16) 1130 (44.49) 1274 (50.16) 1344 (52.91) S HH 8 21.5 (0.85) 10 29 (1.14) 14 20.5 (0.81) 18 29.5 (1.16) 17.5 18(0.69) 30 (1.18) 37 (1.46) 49.5 (1.95) 51 (2.01) 27 I 127 (5) 194.5 (7.65) 244 (9.6) 287 (11.29) 313 (12.32) 378 (14.88) 423 (16.65) 471 (18.54) 487 (19.17) KK 22 (0.87) 32 (1.26) 45 (1.77) 45 (1.77) 60 (2.36) 60 (2.36) 65 (2.56) 75 (2.95) 75 (2.95) X HH 390 495 610 695 770 880 970 1.100 1.180 21.5 (0.85) 29 (1.14) 20.5 (0.81) 29.5 (1.16) 17.5 (0.69) 30 (1.18) 37 (1.46) 49.5 (1.95) 51 (2.01) CC 45 (1.77) 65 (2.56) 90 (3.54) 90 (3.54) 120 (4.72) 120 (4.72) 130 (5.12) 150 (5.91) 150 (5.91) Y KK 22 449 (0.87) 32 (1.26) 575 45 (1.77) 708 45 (1.77) 793 60 (2.36) 910 60 (2.36) 1.020 65 (2.56) 1.130 75 (2.95) 1.274 75 (2.95) 1.344 DD 80 (3.15) 108 (4.25) 146 (5.75) 153 (6.02) 195 (7.68) 207 (8.15) 217.5 (8.56) 223 (8.78) 241.5 (9.51) I CC PP 45 127 (1.77) P2* 15.5 (0.61) 65194,5 (2.56) P2* 21.5 (0.84) 90 (3.54) P3* 244 29.5 (1.16) 90 P3* (3.54) 287 29.5 (1.16) 120 P4* (4.72) 39.5 313(1.55) 120 P4* (4.72) 39.5378 (1.55) 130 P4* (5.12) 42.5 423 (1.67) 150 P5* 52 (5.91)(2.04) 471P5* 15053 (5.91) (2.08) 487 80 (3.15) 108 (4.25) 146 (5.75) 153 (6.02) 195 (7.68) 207 (8.15) 217.5 (8.56) 223 (8.78) 241.5 (9.51) HH DD1) ax velocità [RP] 21,5 29 20,5 29,5 17,5 30 37 49,5 51 1750 1500 1250 1100 1000 850 750 700 650 PP1) ax speed P2* [RP] 15.5 (0.61) P2* 21.5 (0.84) P3* 29.5 (1.16) P3* 29.5 (1.16) P4* 39.5 (1.55) P4* 39.5 (1.55) P4* 42.5 (1.67) P5* 52 (2.04) P5* 53 (2.08) KK 22 32 45 45 60 60 65 75 75 1) ax velocità Peso [RP] [] Weight [lb] 26 (57) 60 (132) 126 (277) 170 (374) 220 (484) 320 (704) 510 (1122) 600 (1320) 700 (1531) CC 175045 150065 1250 90 1100 90 1000 120 850 120 750 130 700 150 650 1) ax speed Vol. [RP] cil. (nuovo) [lt] 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 150 Peso DD [] Cyl. Weight Cap. [lb] (new) [in 26 ](57) 80 (14.25) 60 (132) 108 (32.90) 126 (277) 146(32.40) 170 (374) 153 (44.17) 220 (484) (65.97) 195 320 (704) (90.83) 207 510 (1122) (117.11) 217,5 600 (1320) (139.43) 223700 (222.18) (1531) 241,5 Vol. PP cil. (nuovo) Vol. cil. [lt] (usurato) P2*15,5 [lt] 0.233 0.455 0.539 P2*21,5 0.970 0.531 1.035 P3*29,5 0.724 1.412 P3*29,5 1.081 2.119 P4*39,5 1.489 2.923 P4*39,5 1.9193.769 P4*42,5 2.285 4.487 P5*52 3.640 7.801 P5*53 Cyl. Cap. (new) Cyl. Cap. [in 3 (worn) ] [in(14.25) 3 ] (27.78) (32.90) (59.23) (32.40) (63.18) (44.17) (86.13) (65.97) (129.30) (90.83) (178.35) (117.11) (229.97) (139.43) (273.78) (222.18) (476.09) Vol. cil. (usurato) Inerzia Corpo [lt] [Kgm rpm 0.455 ] 0,25 rpm 0.970 0.87 1.035 rpm 2.34 1.412 rpm 4.65 2.119 rpm 7.17 2.923 rpm14.71 3.769rpm 25.46 4.487 38.56 rpm 59.33 7.801(1407.9) Inertia Body (1) ax Vel. /ax Cyl. Speed Cap. (worn) [in 3 [lb-ft ] 1.750 (27.78) ] (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) 1.500 (59.23) (63.18) 1.250 (86.13) 1.100 (129.30) 1.000 (178.35) 850 (229.97) 750 (273.78) 700 (476.09) 650 omento Inerzia Corpo [Kgm 2 freno [m] 1800 3700 6800 11000 14000 20000 2 38500 48000 ] 0,25 0.87 2.34 4.65 7.17 14.71 25.46 38.56 Brake torque 59.33 (1407.9) Inertia Body [lb-ft 2 [lbin] (15,930) (32,708) (60,110) (97,240) (123,760) (176,800) (256,650) (340,350) (424,800) ] (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) Peso /Weight om. freno Friz. [m] (5,5bar) [m] 26 1500 12300 17350 24700 32350 60 3700 126 6800 11000 170 14000 220 20000 320 2510 38500600 48000 700 Clutch torque (80Psi) [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) Brake torque [lbin] (15,930) (32,708) (60,110) (97,240) (123,760) (176,800) (256,650) (340,350) (424,800) 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) (*) dimensioni delle piastrine a pagina 16 dimensioni - dimensions in (inches) om. Friz. 1) (5,5bar) ot for single [m] stroke operations lt1500 (consult our lt engineering) lt lt (*) keep plate's 12300 dimensions lt at page 17350 16 lt 24700 lt 32350 lt lt 9 Vol. cil. uovo Clutch /Cyl. Cap. torque ew(80psi) [lbin] (13,270) 0,233 (27,430) 0,539 (50,880) 0,531 (79,650) 0,724 (108,850) 1,081 (153,540) 1,489 (2190) 1,919 (286,290) 2,285 (405,330) 3,640 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) (*) dimensioni delle piastrine a pagina 16 dimensioni - dimensions in (inches) 1) ot for single stroke operations (consult our engineering) (*) keep plate's dimensions at page 16 9 Vol. cil. Usato /Cyl. Cap. Worn 0,455 0,970 1,035 1,412 2,119 2,923 3,769 4,487 7,801 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 /m2 Inerzia Corpo/Inertia Body 0,25 0,87 2,34 4,65 7,17 14,71 25,46 36 59,33

DS-1X escluse scluse dalla fornitura ot not supplied supplied by us by us extraction xtraction bore bore odalità di fissaggio sull albero odality of on-shaft mounting 1) Con chiavette a 90o rispetto ai fori d entrata aria 1) Keyways at 90o against air inlet holes 2) Con calettatori (interpellare nostri uffici tecnici) 2) With locking device (contact our engineering) P no2 n 2 a 180o a 180 P no2 n 2 a 180o at 180 Foro alimentazione aria a Air air feed bore bore DS 0250 DS 0470 DS 0900 DS 1400 DS 1900 DS 2600 DS 3800 DS 5100 DS 7600 AS0250 AS0470 AS0900 AS1400 AS1900 AS2600 AS3800 AS5100 AS7600 A max 80 (3.15) 95 (3.74) 125 (4.92) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) A min / 45 (1.77) 55 (2.17) 70 (2.76) 80 (3.15) 90 (3.54) 100 (3.94) 110 (4.33) 115 (4.53) 130 (5.12) Amax 80 95 125 140 160 180 200 220 240 C 304 (11.97) 380 (14.96) 465 (18.31) 543 (21.38) 593 (23.35) 675 (26.57) 755 (29.72) 830 (32.68) 905 (35.63) Amin 45 55 70 80 90 100 110 115 130 95 (3.74) 115 (4.53) 152 (5.98) 174 (6.85) 194 (7.64) 220 (8.66) 255 (10.04) 280 (11.02) 310 (12.20) C 304 380 465 543 593 675 755 830 905 F 14.5 (0.57) 17 (0.67) 22 (0.87) 27.5 (1.08) 28 (1.10) 31 (1.22) 37 (1.46) 37 (1.46) 41 (1.61) 95 115 152 174 194 220 255 280 310 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) F 14,5 17 22 27,5 28 31 37 37 41 39 (1.53) 54.5 (2.15) 59.5 (2.34) 66.5 (2.62) 72.5 (2.85) 83.5 (3.29) 94 (3.70) 103 (4.06) 116 (4.57) 94,5 122 145 165 180 205 22 240,5 263 P 11 (0.43) 14 (0.55) 17 (0.67) 20 (0.79) 21 (0.83) 25 (0.98) 28 (1.10) 30 (1.18) 32.5 (1.28) 39 54,5 59,5 66,5 72,5 83,5 94 103 116 S 8 10 14 18 18 27 P 11 14 17 20 21 25 28 30 32,5 X 390 (15.35) 495 (19.49) 610 (24.02) 695 (27.36) 770 (30.31) 880 (34.65) 970 (38.19) 1100 (43.31) 1180 (46.46) S 8 10 14 18 18 27 Y 449 (17.68) 575 (22.64) 708 (27.87) 793 (31.22) 910 (35.83) 1020 (40.16) 1130 (44.49) 1274 (50.16) 1344 (52.91) X 390 495 610 695 770 880 970 1.100 1.180 I 127 (5) 194.5 (7.65) 244 (9.6) 287 (11.29) 313 (12.32) 378 (14.88) 423 (16.65) 471 (18.54) 487 (19.17) Y 449 575 708 793 910 1.020 1.130 1.274 1.344 HH 21.5 (0.85) 31 (1.22) 20.5 (0.81) 29.5 (1.16) 17.5 (0.69) 30 (1.18) 37 (1.46) 45.5 (1.79) 51 (2.01) I 127 194,5 244 287 313 378 423 471 487 KK HH 22 (0.87) 32 (1.26) 21,5 45 (1.77) 31 45 (1.77) 20,5 60 (2.36) 29,5 17,5 60 (2.36) 30 65 (2.56) 37 75 (2.95) 45,5 75 (2.95) 51 CC KK 45 (1.77) 65 (2.56) 22 90 (3.54) 32 90 (3.54) 45 120 (4.72) 45 60 120 (4.72) 60 130 (5.12) 65 150 (5.91) 75 150 (5.91) 75 PP P2* 15.5 CC (0.61) P2* 21.5 (0.84) P3* 29.5 45 65 (1.16) P3* 29.5 90 (1.16) P4* 39.5 90 (1.55) P4* 39.5 120 (1.55) P4* 42,5 120 (1.67) P5* 52 130 (2.05) P5* 53 (2.08) 150 150 XX PP 490 (19.29) 635 P2*15,5 (25.00) P2*21,5 790 (31.10) P3*29,5 885 (34.84) P3*29,5 990 (38.98) P4*39,5 1135 (44.68) P4*39,5 1235 (48.62) P4*42,5 1450 P5*52 (57.09) 1525 P5*53 (60.04) YY XX 533 (20.98) 700490 (27.56) 870 635(34.25) 790 967 (38.07) 885 1102 (43.39) 990 1255 (49.41) 1135 1369 (53.90) 1235 1610 1450 (63.39) 1674 1525 (65.91) QQ YY P1* 10.5 (0.41) P2* 20 533(0.79) P2* 21.5 700 (0.84) P2* 870 21,5 (0.84) P3* 967 29.5 (1.16) 1102 P3* 29.5 (1.16) 1255P4* 37.5 1369 (1.47) P4* 43 1610 (1.69) P4* 401674(1.57) QQ 16 (0.63) P1*10,5 30 (1.18) P2*20 32 (1.26) P2*21,5 32 (1.26) P2*21,545 (1.77) P3*29,5 45 (1.77) P3*29,5 55 (2.17) P4*37,5 65 P4*43 (2.56) 65 P4*40 (2.56) FF 28 (1.10) 60 16 (2.36) 6530(2.56) 32 65 (2.56) 3290 (3.54) 45 90 (3.54) 45 110 (4.33) 55 130 (5.12) 65 130 65 (5.12) GG FF 41 (1.61) 50 28 (1.97) 7760(3.03) 65 84 (3.31) 6591 (3.58) 90 106 (4.17) 90 106.5 (4.19) 110 108 (4.25) 130 123130 (4.84) 1) ax velocità [RP] GG 41 50 77 84 91 106 106,5 108 123 1750 1500 1250 1100 1000 850 750 700 650 1) ax speed [RP] rpm rpm rpm rpm rpm rpm rpm rpm Peso [] Weight [lb] 26 (57) 60 (132) 126 (277) 170 (374) 220 (484) 320 (704) 510 (1122) 600 (1320) 700 (1531) (1) ax Vel. /ax Speed 1.750 1.500 1.250 1.100 1.000 850 750 700 650 Vol. cil. (nuovo) [lt] 0.233 0.539 0.531 0.724 1.081 1.489 1.919 2.285 3.640 Cyl. Cap. (new) [in 3 ] (14.25) (32.90) (32.40) (44.17) (65.97) (90.83) (117.11) (139.43) (222.18) Vol. cil. (usurato) Peso /Weight [lt] 0.455 0.970 26 60 1.035 1261.412 170 2.119 220 2.923 320 3.769510 4.487 600 7.801 700 Cyl. Cap. (worn) [in 3 ] (27.78) (59.23) (63.18) (86.13) (129.30) (178.35) (229.97) (273.78) (476.09) Inerzia Corpo [Kgm 2 lt lt lt lt lt lt lt lt lt ] 0,25 0.87 2.34 4.65 7.17 14.71 25.46 38.56 Vol. cil. uovo /Cyl. Cap. ew 0,233 0,539 0,531 0,724 1,081 1,489 1,919 2,285 59.333,640 (1407.9) Inertia Body [lb-ft 2 ] (5.93) (20.65) (55.53) (110.34) (170.14) (349.07) (604.17) (915.03) Vol. cil. Usato /Cyl. Cap. Worn 0,455 0,970 1,035 1,412 2,119 2,923 3,769 4,487 7,801 omento freno [m] 1800 3700 6800 11000 14000 20000 2 38500 48000 Brake torque [lbin] (15,930) (32,708) /m2 /m2 (60,110) /m2 (97,240) /m2 (123,760) /m2 (176,800) /m2 (256,650) /m2 (340,350) /m2 (424,800) /m2 om. Friz. (5,5bar) Inerzia Corpo/Inertia [m] Body 1500 0,25 0,87 2,34 4,65 12300 7,17 14,71 17350 25,46 24700 36 32350 59,33 Clutch torque (80Psi) [lbin] (13,270) (27,430) (50,880) (79,650) (108,850) (153,540) (2190) (286,290) (405,330) 1) on per operazioni in colpo singolo (consultare ns ufficio tecnico) (*) dimensioni delle piastrine a pagina 16 dimensioni - dimensions in (inches) 1) ot for single omomento stroke operations Frizione 5,5 bar (consult our engineering) (*) keep plate's dimensions at page 16 10

AS-DS Flangia adduzione aria e Piastrine Air Inlet Flange and Keep plate ezza e ax in ax AS 0250 AS 0470 AS 0900 AS 1400 AS 1900 AS 2600 AS 3800 AS 5100 AS 7600 80 (3.15) 91 (3.58) 120 (4.72) 140 (5.51) 160 (6.30) 180 (7.09) 200 (7.87) 220 (8.66) 240 (9.45) 60 (2.36) 72 (2.83) 85 (3.35) 96 (3.78) 108 (4.25) 130 (5.12) 138 (5.43) 148 (5.83) 165 (6.50) 42 (1.65) 50 (1.97) 61 (2.40) 65 (2.56) 80 (3.15) 95 (3.74) 100 (3.94) 110 (4.33) 120 (4.72) 10 12 14 16 16 1/2" 3/4" 1" 1" 1 1/4" 1 1/2" 1 1/2" 2" 2" 165 (6.50) 195 (7.68) 238 (9.37) 272 (10.71) 295 (11.61) 312 (12.28) 360 (14.17) 380 (14.96) 420 (16.54) 42 (1.65) 43 (1.69) 52 (2.05) 54 (2.13) 62 (2.44) 77 (3.03) 77 (3.03) 90 (3.54) 95 (3.74) 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 13 (0.51) 10 (0.39) 15 (0.59) 80 (3.15) 105 (4.13) 128 (5.04) 146 (5.75) 160 (6.30) 185 (7.28) 200 (7.87) 220 (8.66) 235 (9.25) 94.5 (3.72) 122 (4.80) 145 (5.71) 165 (6.50) 180 (7.09) 205 (8.07) 228.5 (9.00) 240.5 (9.47) 263 (10.35) dimensioni - dimensions in (inches) Introduzione aria GIUTO ROTAT ADDUZIO ARIA Air inlet AIR ILT UIO ezza AS 0250 AS 0470 AS 0900 AS 1400 AS 1900 AS 2600 AS 3800 AS 5100 e ax 80 (3.15) 91 AC (3.58) 250 AC 120 470 (4.72) AC 900 140 AC (5.51) 1400 AC 160 1900 (6.30) AC 2600 180 AC (7.09) 3800 AC 200 5100 (7.87) AC 7600 220 (8.66) in 60 (2.36) 72 (2.83) 85 (3.35) 96 (3.78) 108 (4.25) 130 (5.12) 138 (5.43) 148 (5.83) / 42 Amax (1.65) 50 (1.97) 80 61 91 (2.40) 120 65 (2.56) 140 80 160 (3.15) 180 95 (3.74) 200 100 220 (3.94) 240 110 (4.33) 10 Amin 12 60 72 14 85 16 96 108 16 130 138 148 165 B 42 50 61 65 80 95 100 110 120 1/2" 3/4" 1" 1" 1 1/4" 1 1/2" Peso / Weight 1 1/2" Velocità / Speed 2" A B C C 10 D 12 14 F16 16 G H 165 (6.50) D 195 (7.68) 1/2 238 3/4 (9.37) 1 272 (10.71) 1 295 1 1/4 (11.61) 1 1/2 312 (12.28) 1 1/2 lbs360 2 (14.17) rpm 2 380 (14.96) 1/2" 4,5 (0,17) 42 (1.65) F 35 (1,38) 43 (1.69) 16527 (1,06) 52 195 18 (0,71) (2.05) 238 80 (3,15) 54 (2.13) 272 111 62 295 (4,37) (2.44) 312 30 (1,18) 77 (3.03) 3600,75 (1,65) 77 380 1500 (3.03) 420 90 (3.54) 3/4" 17 (0,66) G 56 (2,20) 4232 (1,26) 43 20 (0,79) 52 86 (3,39) 54 122 62 (4,80) 77 36 (1,42) 770,96 (2,12) 90 1000 95 8.5 (0.33) H 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 8.5 (0.33) 13 13 10 (0.51) 15 10 (0.39) 1" 22 (0,86) 65 (2,56) 41 (1,61) 23,5 (0,93) 98 (3,86) 138 (5,43) 40 (1,57) 1,4 (3,09) 700 ax 1 1/4" 32 80 (1,26) Lmax (3.15) 87 (3,43) 105 (4.13) 10650 (1,97) 137,25 128 (5.04) 28 (1,10) 166,25 146113 (5.75) (4,45) 190 187 160 210 (7,36) (6.30) 245 50185 (1,97)(7.28) 268 3,2 (7,06) 200 285 (7.87) 1500310 220 (8.66) 1 1/2" 3894.5 (1,49) (3.72) 94 (3,70) 122 (4.80) 120,755 (2,17) 154,25 145 (5.71) 31 (1,22) 181,2 165117 (6.50) 208,2 (4,61) 197 180 227,5 (7,76) (7.09) 262,3 55 205 (2,17)(8.07) 289 3,9 (8,60) 228.5 304 (9.00) 1000 336,5 240.5 (9.47) 2" 48 (1,89) 108 (4,25) 65 (2,56) 35 (1,38) 131 (5,16) 224 (8,82) 70 (2,76) 5,3 (11,69) 800 dimensioni - dimensions dimensioni - dimensions in (inches) Piastrine / Keep Plates GIUTO PIASTRI ROTAT - KP PLATS ADDUZIO ARIA AIR ILT UIO no4 Fori filettati no4 Threaded holes na --> P1 P2 P3 P4 P5 P6 ate --> Piastrina Keep plate P1 P2 P3 P4 P5 P6 20 (0,78) 25 (0,98) 35 (1,37) 45 (1,77) 60 (2,36) 60 (2,36) A35 (1,37) 20 42 (1,65) 25 55 (2,16) 35 65 (2,55) 45 85 60(3.34) 6090 (3.54) B 5 (0,19) 35 7,5 (0,29) 42 10 (0,39) 55 15 (0,59) 65 20 85(0,78) 9020 (0,78) C 10 (0,39) 5 15 (0,59) 7,5 20 (0,78) 10 25 (0,98) 15 40 20(1,57) 2040 (1,57) D7,5 (0,29) 10 (0,33) 15 10 (0,39) 20 10 (0,39) 25 12,5 40(0,49) 4015 (0,59) 4,5 (0,17) 7,5 5,5 (0,21) 6,5 (0,25) 10 (0,33) 10 10,5 12,5(0,41) 15 10,5 (0,41) F 3 (0,12) 4,5 5,5 3 (0,12) 6,5 4 (0,15) 5 (0,19) 10,5 8 (0,31) 10,5 8 (0,31) 3 3 3 4 5 8 8 Ci riserviamo il diritto di effettuare modifiche dettate da aggiornamenti tecnici senza preavviso. sse saranno disponibili sul sito internet (www.ompisrl.com) Due Ci to riserviamo technical il updatings, diritto di effettuare we reserve modifiche the right dettate to make da aggiornamenti changes without tecnici previous senza preavviso notice. / They Due to will technical be available updatings, on the we internet reserve ( the www.ompisrl.com right to make changes ) without previous notice. 16 A B C D F G H Peso / Weight V lbs

Giunto rotante adduzione aria Air Inlet Union R Giunti rotanti / Rotating Unions Chiave D Wrench D Filettatura Gas cilindrica Threaded G UI 339/66 H ØB ØA ØC A Parti rotanti / Rotating parts F G A B C D F G H Tipo/Type BSP rpm R 050 1/2 4,5 35 27 18 80 111 30 0,75 1500 R 075 3/4 17 56 32 20 86 122 36 0,96 1000 R 100 1 22 65 41 23,5 98 138 40 1,4 700 R 125 1 1/4 32 87 50 28 113 187 50 3,2 1500 R 150 1 1/2 38 94 55 31 117 197 55 3,9 1000 R 200 2 48 108 65 35 131 224 70 5,3 800 Peso Weight Velocità Speed